Gravity Screen - On / Off -savagemessiahzine.com

> savagemessiahzine.com >Android >Android - Programs >System utilities

Attention!

New threads need to be created only inroot partition! In the future, they will be processed by moderators.

If you posted a new version of the program, please notify the moderator by clicking the "Complaint" button on your message.

Catalog of Android programs

86 pages
1 2 3 4 5 6 > »

Gravity Screen - On / Off | Turns off and on the screen when tilting, turning and so on.

23.05.13, 06:17 | #1
●
Friendssavagemessiahzine.com
Rep: (1360)

Gravity Screen - On / Off
Version: 3.22.1.0

Last update of the program in the header:17.05.2019

Attached Image

Screenshots:

Short description:
Turns off and on the screen when tilting, turning and so on.

Description (ENG):

Often use the phone? Tired of constantly pressing the on / off button?
This application allows the screen to automatically turn off when you put the phone in your pocket or on the table, and turn on when you take it out or pick it up. No need to touch any button.

HOW IT WORKS:

The application monitors the position of the device through the orientation sensor in space. If your phone has been turned down, at a certain angle, it is probably not used. In this situation, the proximity sensor is activated to determine if it is covered. If so, the screen will turn off, because you probably put the phone in your pocket or put it on the table.
To conserve battery power, the proximity sensor is activated only when it is really necessary. Moreover, when the screen is extinguished and the sensor is covered, the application plunges the phone into a deep sleep state to save as much energy as possible.

Main characteristics:

- Position sensor "in your pocket": Detects that your phone is in your pocket. When you turn the phone at a certain angle, the screen turns off.

- Position sensor "on the table": Detects if the phone is on the table and turns off the screen.

- Approach sensor metering mode: If the device is upside down, the proximity sensor is taken into account. When you disable this function, the application will only rely on the orientation sensor in space.

- Screen on mode with proximity sensor: turns on the screen when you take the phone out of your pocket and turns it off when you put it back. Also, by swiping your finger on the proximity sensor, you can wake the device.

- Turning on the screen by shaking: If the screen is turned off and the device is in the working position, the screen can be woken up by shaking, according to the sensitivity set.

- Support for the included screen using shake: The application will track the slightest movements of your hand (according to the device in space), and if they are detected, keep the screen on. It can be useful when you are reading something to prevent permanent screen blanking, by timeout.

POWER CONSUMPTION:

Must be insignificant. I experienced about 5 percent of the extra expense on the test device. However, it may vary in different devices, and depending on the configuration of the application.

IMPORTANT:

On some devices, an alarm clock conflicts with this application. If you have a similar bug, please use a third-party alarm clock, for example:https://play.google.com/store/apps/details?...rmClockPlusDock

NOTE:

- The application has not been widely tested. We hope that it will work fine on your device. But, if you have any problems or just have a question, please email me.

For additional search of frequently asked questions, please contact here:http://forum.xda-developers.com/showthread.php?t=2227516

Description (ENG):

Using your phone often? Tired of the on-off switching?
If you put your phone on it, it will turn it off automatically. No need to touch any button and you are ready to go.

HOW IT WORKS:

It monitors the orientation of the device through the gravity sensor. When your phone is pointing down, itвЂ™s likely to be out of use. If it is covered. If yes, you canвЂ™t get it.
If only itвЂ™s really necessary. Moreover, it can save as much energy as possible.

MAIN FEATURES:

- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it'll prepare to turn the screen off

- Table Sensor: Detect your screen off.

It turns out that it is pointing out that it is taking the proximity sensor to the gravity sensor.

- Turn Screen On By Proximity: Turn It On. The phone can be woken up as well.

If you want to go on the screen, you can turn it on.

- Keep Screen On Motion: It is a screeble pattern. It is suspicious. If you leave your device.

BATTERY USAGE:

It should not be significant. I experienced about 6 per cent. However, it can vary over different devices.

IMPORTANT:

After it had gone gone off! Please check if it's the case for you. If, yes, use a third party app, for example:https://play.google.com/store/apps/details?...rmClockPlusDock

SIDE NOTE:

- The app was not widely tested. Hopefully it will work fine for you. But, if you have a question, please email me.

FAQ:

Q: IвЂ™m putting my phone in my pocket, why?
A: The proximity sensor is not always accurate. It can fail recognizing some materials specially if they are very close to it. If it happen occasionally, probably not still worth to use the sensor. If it happens to you too often, you can turn it off. It will be a little bit more energy.

Q: I'm experiencing high battery usage, why?
If youвЂ™re not in use, itвЂ™s not worth it. Moreover, please note that youвЂ™re on the short period of time.

Q: It doesnвЂ™t work for me, why?
A: It is unfortunatelly. More info:http://www.saltwebsites.com/2012/and...ers-screen-off

More FAQs:http://forum.xda-developers.com/showthread.php?t=2227516

Android required: 4.0+
Russian interface: Yes
Developer: Plexnor
Google Play: https: //play.google.coвЂ¦r.gravicscreenofffree
YouTube videos: https://www.youtube.com/watch?feature=playe...p;v=c-gR4Ec6_ms

Download:
Version: 3.22.1.0 Paid Gravity Screen - On / Off
Version: 3.22.1.0 Unlocked Gravity Screen - On / Off
Version: 3.22.1.0 Ultra Lite Gravity Screen - On / Off (Post by Alex.Ognev # 84384848)

Past versions

Gravity Screen Off Pro v1.46.apk (222.24 KB)

Post has been editediMiKED - 21.05.19, 18:35

Reason for editing: New 3.22.1.0 Ultra Lite

23.05.13, 11:48 | #2
●
Friendssavagemessiahzine.com
Rep: (79)

Good application. While I replaced all the screen disconnectors on the proximity sensor, I'm testing.
The better than simple switches on the proximity sensor - because when the body is in working orientation, itвЂ™s not scary to accidentally cover the proximity sensor with your hand - the screen will not turn off (and this often happened with similar applications that only focus on proximity sensor), since The orientation sensor is taken into account in the first place, and proximity is only for checking when the orientation is "upside down".

In terms of harshness - my fears were not justified, it eats very little and economically.

Post has been editedazzimov - 23.05.13, 13:02

23.05.13, 12:11 | #3
●
Friendssavagemessiahzine.com
Rep: (555)

Russian.

Attached files

Gravity_Screen_Off_RU_1.46.apk(227.74 KB)

23.05.13, 12:56 | #4
●
Friendssavagemessiahzine.com
Rep: (79)

Translated description:

Often use the phone? Tired of constantly pressing the on / off button?
This application allows the screen to automatically turn off when you put the phone in your pocket or on the table, and turn on when you take it out or pick it up. No need to touch any button.

HOW IT WORKS:

The application monitors the position of the device through the orientation sensor in space. If your phone has been turned down, at a certain angle, it is probably not used. In this situation, the proximity sensor is activated to determine if it is covered. If so, the screen will turn off, because you probably put the phone in your pocket or put it on the table.
To conserve battery power, the proximity sensor is activated only when it is really necessary. Moreover, when the screen is extinguished and the sensor is covered, the application plunges the phone into a deep sleep state to save as much energy as possible.

Main characteristics:

- Position sensor "in your pocket": Detects that your phone is in your pocket. When you turn the phone at a certain angle, the screen turns off.

- Position sensor "on the table": Detects if the phone is on the table and turns off the screen.

- Approach sensor metering mode: If the device is upside down, the proximity sensor is taken into account. When you disable this function, the application will only rely on the orientation sensor in space.

- Screen on mode with proximity sensor: turns on the screen when you take the phone out of your pocket and turns it off when you put it back. Also, by swiping your finger on the proximity sensor, you can wake the device.

- Turning on the screen by shaking: If the screen is turned off and the device is in the working position, the screen can be woken up by shaking, according to the sensitivity set.

- Support for the included screen using shake: The application will track the slightest movements of your hand (according to the device in space), and if they are detected, keep the screen on. It can be useful when you are reading something to prevent permanent screen blanking, by timeout.

POWER CONSUMPTION:

Must be insignificant. I experienced about 6 percent of the extra expense on the test device. However, it may vary in different devices, and depending on the configuration of the application.

IMPORTANT:

On some devices, an alarm clock conflicts with this application. If you have a similar bug, please use a third-party alarm clock, for example:https://play.google.com/store/apps/details?...rmClockPlusDock

NOTE:

- The application has not been widely tested. We hope that it will work fine on your device. But, if you have any problems or just have a question, please email me.

For additional search of frequently asked questions, please contact here:http://forum.xda-developers.com/showthread.php?t=2227516

23.05.13, 14:17 | #5
●
Friendssavagemessiahzine.com
Rep: (13)

It doesn't work for me at all.

23.05.13, 15:06 | #6
●
Friendssavagemessiahzine.com
Rep: (79)

Pis Perhaps you did not activate the admin rights to the application (for forced screen locking), in this case the option 'Alternative Proximity Method' can help you

23.05.13, 20:42 | #7
●
Friendssavagemessiahzine.com
Rep: (13)

Azzimov @ 05/23/2013, 1:06 PM

Perhaps you did not activate the admin rights to the application

Everything has been activated.

24.05.13, 07:03 | #8
●
Friendssavagemessiahzine.com
Rep: (13)

Does anyone work?
If yes, then lay out, plz, the optimal settings.
And, if possible, translate too, plz.

Post has been editedPis - 26.05.13, 08:54

27.05.13, 03:44 | #9
●
Friendssavagemessiahzine.com
Rep: (55)

It works normally, I swung the Russian version, the translation is good, you can figure it out.

27.05.13, 21:10 | #10
●
Friendssavagemessiahzine.com
Rep: (16)

It works, a very good combination of "gravity" and "approximation".
Let's see how it will be in the future.
We still need to play around with the settings, if anyone has ready-made recommendations ....

27.05.13, 23:13 | #11
●
Friendssavagemessiahzine.com
Rep: (136)

It works great on default settings, you donвЂ™t even need to change it. Very cool stuff.
True, we'll see with the battery, while it's clear that it does not tear the bottom out of it. If there is not even a hole in it - an unambiguous Masthev.

Post has been editedShoa - 27.05.13, 23:43

28.05.13, 00:00 | #12
●
Friendssavagemessiahzine.com
Rep: (79)

I drive the application for about a week, the battery eats very economically, at the level of the rest of the system processes of minimum energy consumption.
gravity sensor - it is always active by default in the system, so the program simply polls it, and the proximity sensor is turned on only when necessary, check in your pocket or not, it does not burn constantly, like on similar applications like Proximity Screen Off, or Smart Screen Off.

28.05.13, 13:32 | #13
●
Active users
Rep: (0)

excellent, still the sound notification, what "click")

28.05.13, 21:23 | #14
●
Friendssavagemessiahzine.com
Rep: (63)

Smart Screen Off and Smart Screen One deleted and now use this program.

28.05.13, 22:02 | #15
●
Friendssavagemessiahzine.com
Rep: (79)

Savoyskaya @ 05/28/2013, 1:32 PM

excellent, still the sound notification, what "click")

He wrote a development with a similar request, he answered that he could not guarantee, but he would take note.
write to him too, maybe the more requests - the more chances to give it a boost? )

28.05.13, 22:09 | #16
●
Friendssavagemessiahzine.com
Rep: (27)

Found a bug. The backlight of the screen is constantly on until you turn over or turn the phone. When you turn off the program, everything works fine.
savoyskaya: I agree, sound or vibration confirmation of operation does not hurt.

28.05.13, 23:45 | #17
●
Friendssavagemessiahzine.com
Rep: (79)

fighter25 Perhaps you have the option "Keep screen On by motion" (Support for the included screen with shaking), which supports the screen included. I did not see such a bug in myself.

29.05.13, 21:00 | #18
●
Friendssavagemessiahzine.com
Rep: (120)

The trial and error method solved the problem with the screen turned on, setting the delay time to 0 (default 10). It seems that this feature adds set minutes to the time that is set in the system. That is, if I have 1 min in the system, then with 10 set by default in the program, the screen will light up 11.

Post has been editedNatazima - 29.05.13, 21:01

29.05.13, 23:21 | #19
●
Friendssavagemessiahzine.com
Rep: (109)

[email protected], 7:44

It works normally, I swung the Russian version, the translation is good, you can figure it out.

And where did you get the Russian version? I would very much like this. :-)

30.05.13, 00:08 | #20
●
Friendssavagemessiahzine.com
Rep: (36)

om684 @ 05.29.2013, 23:21

And where did you get the Russian version? I would very much like this. :-)

That is so otmochil soaked! 3 post this topic! : rofl:

Post has been editedMatveevalex9 - 30.05.13, 00:10

30.05.13, 09:26 | #21
●
Friendssavagemessiahzine.com
Rep: (1)

Hello!
If you put the phone on the table with the screen up and for 2, 3 minutes to take the phone, the screen turns on immediately, but if the phone is more than 3 minutes, then the screen turns on only if you hold on the proximity sensor!
I wish that the screen would always turn on without wiring to the proximity sensor !!! Where is it in the settings?

86 pages
1 2 3 4 5 6 > »

Full version

Help rules

Now: 07/07/19, 10:17

©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com^®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement

Forum IP.Board © 2019 IPS, Inc .