> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


33 pagesV  < 1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> DNS AirTab E76 - Firmware
Altimfm
Message#1
08.05.13, 09:54
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

DNS AirTab E76 - Firmware
PictureDNS AirTab E76
Description | Discussion | Firmware | games and apps | Owners Club


Drivers and Utilities

Official firmware

Unofficial firmware

Instructions
Device firmware
1. Install LiveSuit v 1.09 Ru. If the device is not detected, then we first install LiveSuit v. 1.07, and then v. 1.09.
2. Run the program for the firmware of tablet PCs - LiveSuit.
3. In the pop-up window, select the answer "No".
4. Select the firmware image.
5. We connect the device to the PC as follows: while holding the “Vol +” button on the device, connect the cable and, without releasing the button, repeatedly press the “Power” button until the device formatting options pop up in the firmware program.
6. In this window, you should answer "Yes", as well as in the following.
7. After that, the flashing process starts. Do not disconnect the cable from the device until the end of the firmware. It is necessary to wait for the completion of the firmware, as indicated by the pop-up window.
8. Click "OK". The device is stitched.


Installing the driver for the touchscreen
1. Allow USB debugging in developer settings.
2. Connect the included device to the computer.
3. Go to the task manager. If the device is installed correctly, the ADB Interface should be displayed in the list. If the automatic installation of drivers failed, then installthisdriver.
4. Download the archive with the drivers for the touch (link to the driver is attached in a post dedicated to the firmware).
5. Unpack the archive. Run the file "run.bat". A window appears showing the copy process. After successful copying, the device will be rebooted.



Post has been editedsnekt - 12.06.17, 08:09
Reason for editing: LiveSuit v 1.11 - updated link
holodok161rus
Message#42
09.06.13, 14:24
Novice
***
[offline]

Group: Active users
Messages 43
Check in: 03.01.13
Samsung Galaxy Note 2 GT-N7100

Reputation:-  0  +

give backup
holodok161rus
Message#43
11.06.13, 19:51
Novice
***
[offline]

Group: Active users
Messages 43
Check in: 03.01.13
Samsung Galaxy Note 2 GT-N7100

Reputation:-  0  +

With the help of PhoenixCard the tablet came to life)))))
Altimfm
Message#44
11.06.13, 23:33
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

With PhoenixCard


Cool What exactly did you do?
holodok161rus
Message#45
12.06.13, 11:10
Novice
***
[offline]

Group: Active users
Messages 43
Check in: 03.01.13
Samsung Galaxy Note 2 GT-N7100

Reputation:-  0  +

I installed the firmware on microSD and all
Altimfm
Message#46
20.06.13, 11:55
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

There was firmware 4.2.2 for the tablet family on the Allwinner A13 processor. I will be engaged in the port. Soon wait.
Ler0n
Message#47
24.06.13, 06:46
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 168
Check in: 17.03.13
Apple iPhone 6s Plus

Reputation:-  32  +

Krakoziabra @ 03/29/2013, 00:42*
Install Android JellyBean 4.1.1 on DNS Airtab e76 / Ployer momo9-iii


LiveSuit v1.7 -http://yadi.sk/d/nGftbC0Q3kBXS
LiveSuit v1.9 RU -http://yadi.sk/d/3cFDrRlG3kBXm
Instructions on firmware from the office. - Attached file manual_fw_e76.pdf (474.54 КБ) Downloads: 109


Komrad bimer.61, repacked the backup in the img file for the firmware via LiveSuit, so now we sew our tablet humanly) link to the firmware:https://disk.yandex.ru/public/?hash=JgUHe1K...wBzvAvMVVsFc%3D

leave for those who are not afraid of difficulties)):
Spoiler (+/-)
original topic:http://forum.xda-developers.com/showthread.php?t=2189569
Install LiveSuit Android JellyBean 4.1.1 via LiveSuit
LiveSuit v1.7 -http://yadi.sk/d/nGftbC0Q3kBXS
LiveSuit v1.9 RU -http://yadi.sk/d/3cFDrRlG3kBXm
firmware -http://yadi.sk/d/9UYZdfHK3cOcA
Instructions on firmware from the office. - Attached file manual_fw_e76.pdf (474.54 КБ) Downloads: 109

We copy from the archive to the root of the microSD flash drive the folder "clockworkmod" with all the contents and install it into the tablet, the data on it will not be deleted, the flash drive must be in the format of the FAT32 file system -http://yadi.sk/d/8BKXM0XS3gSeOor modified this backup of the AirTab E76 DNS - Discussion (Post # 20962042)
When loading, we get a tablet with an offset screen, not a working touchscreen and a g-sensor. Next, install the CWM
Installing touch screen driver & clockworkmod recovery (CWM) 6.0.2.8

1) Extract files from archive to any folder on computer -http://yadi.sk/d/3hTjOWPK3gr8M
2) enable USB debugging on the tablet (if disconnected, connect the mouse via OTG cable, settings-for developers-debug usb), connect the tablet to the computer, then install the drivers, if the device is not installed, install this driver here:http://yadi.sk/d/B7AZHQJx3gfS4if swears on compatibility we say "Install".
Check whether the driver is installed or not:
Spoiler (+/-)

3) run the Autorun file from the archive, sequentially select the items in the menu:
1-check the connection and whether the usb driver is installed
Spoiler (+/-)

2- install touchscreen and gSenser drivers
3- install CWM
4- we overload the tablet in CWM
6- exit
After the CWM flash driver is closed, abd.exe32 hangs in the system (I have win7 64x, so I probably can’t exit correctly). It ends with the "Task Manager".
Installing backup from CWM

Having rebooted, in the CWM with the VOL + and VOL- arrows, select the "backup and restore" option by pressing the POWER button, then select "restore". The next item select "2013-03-31.12.36.18", then Yes - restore all users - the recovery process from the backup will follow. After recovery, select "Go Back" and "reboot system now". After downloading, we use fully working firmware 4.1.1, customize it to your taste and color} -)
This CWM also works on the firmware from DNS and Tragedy, but as always not without drawbacks) The buttons are mixed up and down (I think it is not critical) and I did not manage to get to CWM via POWER and VOL +. Of the pluses, the Novo7 Tools installed in the JellyBean 4.1.1 firmware has worked, so you can get to CWM in this firmware from both the utility and the Autorun file, which drivers for the touchscreen and CWM were stitching.

Screenshots of the firmware:
Spoiler (+/-)

Installing the Power menu for 4.1 - DNS AirTab E76 - Discussion (Post # 20911632)

P.S. if you want to put a plus, also do not forget about Komrad AltimFm, the working g sensor is precisely his merit and bimer.61, which simplified the installation process)

Post has been editedKrakoziabra - 09.05.2013, 13:16

Why so hard? Is it possible to repack all this in img?
M
4.19. Forbidden abuse of quoting (overquoting, overquoting). Just select the main points and press the button.Picture


Post has been editedlirtm - 24.06.13, 11:31


--------------------
If you find an error in my post, select it and click Ctrl + W : D
Altimfm
Message#48
24.06.13, 08:37
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

Is it possible to repack all this in img?


So this is the very first installation method, if you do not open the spoiler, then there is * img on top. A file that can be installed without dancing with a tambourine, and under the spoiler there is an option for extremes: yes2:

Post has been editedAltimfm - 24.06.13, 09:16
Altimfm
Message#49
25.06.13, 16:47
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

Android 4.2.2 JellyBean for DNS AirTab E76

1) Download from here:Faaastjb
2) Install via LiveSuit. LiveSuit v 1.11 can be downloaded here:LiveSuit


I checked the performance, everything seems to work. The firmware itself is smooth and nimble.

Original theme:http://www.techknow.me/forum/index.php?topic=5765.0

Post has been editedAltimfm - 26.06.13, 14:11
6e36aIIIeHHbIu
Message#50
25.06.13, 17:56
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 259
Check in: 23.01.13
Apple iPhone SE

Reputation:-  11  +

Install via LiveSuit

Can you give more details? Sorry, I'm a noob, the first time I'm going to sew an android body
Altimfm
Message#51
25.06.13, 17:57
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

Can you give more details?


Well, in general, I meant that we do everything according to the standard instructions, which is in the header.

Post has been editedAltimfm - 25.06.13, 17:59
6e36aIIIeHHbIu
Message#52
25.06.13, 18:02
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 259
Check in: 23.01.13
Apple iPhone SE

Reputation:-  11  +

Well, in general, I meant that we do everything according to the standard instructions, which is in the header.

And I understood everything, I apologize. Another question: how much battery do you need or do you care?
Altimfm
Message#53
25.06.13, 18:06
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

How much battery charge do you need or do you care?


Well, it is usually recommended 30 percent, but I myself never paid special attention to it.
6e36aIIIeHHbIu
Message#54
25.06.13, 18:08
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 259
Check in: 23.01.13
Apple iPhone SE

Reputation:-  11  +

Well, it is usually recommended 30 percent, but I myself never paid special attention to it.

Ok thank you, I hope not get a brick. By the way, the firmware process itself takes a long time?

Post has been edited6e36aIIIeHHbIu - 25.06.13, 18:08
Altimfm
Message#55
25.06.13, 18:21
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

By the way, the firmware process itself takes a long time?


Nope, fast.
jo-vega
Message#56
25.06.13, 18:50
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 22.02.13
Highscreen Zera S

Reputation:-  7  +

Thanks for the firmware. Now I'm coming :)
Altimfm
Message#57
25.06.13, 18:55
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

Now I will


Only there the menu seemed to me somehow small, I did not find how to stretch it. It is treated by a third-party launcher;)
6e36aIIIeHHbIu
Message#58
25.06.13, 19:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 259
Check in: 23.01.13
Apple iPhone SE

Reputation:-  11  +

I could not reflash, zapara at the moment
We connect the device to the PC as follows: while holding the “Vol +” button on the device, connect the cable and, without releasing the button, repeatedly press the “Power” button until the window with the device formatting options pops up in the firmware program.

The window does not appear and that's it. What I just didn’t do - ADB installed, stuck ports in every port, put Live Suit versions in it, clicked differently, deleted / reinstalled drivers from the Device Manager. Nichrome! : beee:
I beg of the people, can you somehow help? : yes2:
Altimfm
Message#59
25.06.13, 20:03
Puma purum
*******
[offline]

Group: Curators
Messages 792
Check in: 08.11.12
Xiaomi Mi A1 4/32

Reputation:-  57  +

omytairo,

I tried, really, that's why I was so slow with the firmware. But my unstable Internet does not allow to fill it with Yandex. Disk: (
jo-vega
Message#60
25.06.13, 20:10
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 22.02.13
Highscreen Zera S

Reputation:-  7  +

All I asked. It works great, the interface is different from 4.1.1, well, and here he even liked it more;) Thanks again

Post has been editedjo-vega - 25.06.13, 20:11
Droider40
Message#61
25.06.13, 20:36
a guest
*
[offline]

Group: Users
Messages 3
Check in: 24.06.13

Reputation:-  0  +

AltimFm,

I hope with the firmware will not need to dance with a tambourine?
DNS
 

33 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 18:46