> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


250 pagesV  < 1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> DNS S5301 \ DNS S5301M \ DNS S5301Q - Official firmware and their modifications
Model of your device
What version of the smartphone do you own?
DNS S5301M (First Modification) [ 99 ] ** [11,2%]
DNS S5301Q (Second Modification) [ 627 ] ** [70,93%]
DNS S5301 (Original model) [ 158 ] ** [17,87%]
Total votes: 884
 
Koshsh94
Message#1
18.04.13, 23:42
Just Kosh
*******
[offline]

Group: Curators
Messages 1242
Check in: 22.09.12
Redmi Note 7 4/64

Reputation:-  147  +

DNS S5301 \ DNS S5301M \ DNS S5301Q - Official firmware and their modifications
PictureDNS S5301 \ S5301M (ZOPO ZP900 Leader, HERO H9500 +)
PictureDNS S5301Q (ZOPO ZP910, ZP900H, CAESAR A9600)
Description | Q-version description | Discussion | Firmware

Important information!
Custom firmware from the original 5301 for the 5301M modification will work after installing the transformer patch. Before asking another question about the device, please indicate the standard smartphone (5301) you have or its modifications (5301M or 5301Q).

The DNS S5301M modification is different from the original 5301 by Wi-Fi and Bluetooth modules. Another DNS S5301Q modification based on the MediaTek MT6589 4-core processor also appeared on the market.
Firmware
Firmware - official \ custom

Official firmware

Modified firmware

Firmware based on 4.0.4 for DNS S5301 \ 5301M
Firmware based on 4.1.2 for DNS S5301 \ 5301M
Firmware based on 4.2. for DNS S5301 \ 5301M
Firmware based on 4.2.1 and 4.2.2 for DNS S5301Q
Firmware based on 4.3.1 for DNS S5301Q
4.4.x firmware for DNS S5301Q
SP Flash Tool Firmware
Instructions
Drivers and Utilities
Patches, fixes, fashions, decorations
CWM recovery
Lewa cwm
Modrekaveri from Lewa for DNS S5301 \ S5301M
CWM 6.0.1
Standard CWM 6.0.1 for DNS S5301 \ S5301M
CWM Recovery 6.0.4.4
CWM Recovery 6.0.4.4 for DNS s5301 \ s5301M
TWRP 2.6.3.0
TWRP 2.6.3.0 for DNS 5301
TWRP + CWM 6.0.15
TWRP + CWM recovery for DNS S5301Q (+ installation instructions)
TWRP 2.6.3
TWRP 2.6.3 for DNS S5301Q (thanks to iv2012 (Dimid))
TWRP 2.7.1.0 v2
TWRP 2.7.1.0 v2 for DNS S5301Q (thanks to iv2012 (Dimid)
TWRP Recovery KitKat 2.7.1.1
TWRP Recovery KitKat 2.7.1.1 by SevenMaxs


Post has been editedKoshsh94 - 24.10.16, 20:19
Reason for editing: 2 way to return a piece of RAM to DNS S5301Q
Goha555
Message#42
30.04.13, 14:32
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 27.09.11

Reputation:-  0  +

You tell me a post on the firmware using the SP Flash Tool in general to use or you can just get the CWM and through the engineering menu to flash on MIUI?
I just don't want to make a brick out of a new body by accident))
2008tgd
Message#43
30.04.13, 14:39
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1745
Check in: 17.10.08
Prestigio Multiphone 5550 DUO

Reputation:-  203  +

Goha555As far as I understand all this, you can not put rekoveri without root, IMHO. And another thing: it seemed to me that rekoveri levs are much more convenient than cyan.

Post has been edited2008tgd - 30.04.13, 14:41
Reason for editing: Additive


--------------------
"Do good and throw it into the water." My patience is also not unlimited. I answer only questions in PM.
Koshsh94
Message#44
30.04.13, 14:59
Just Kosh
*******
[offline]

Group: Curators
Messages 1242
Check in: 22.09.12
Redmi Note 7 4/64

Reputation:-  147  +

CWM firmware

Attention!!! need rights ROOT and MODRECOVERY
1. Enter the recovery mode - turn off the body, clamps the "power" button and the volume rocker "up"
2. wipe data / factory reset
3. wipe cache partition
4. advansed - wipe delvik cache
5.install zip from sdcard - select the file with the firmware and go ahead


--------------------
Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion!
Bobriks
Message#45
30.04.13, 15:33
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0  +

Wolf-cup,
When I bought, I checked in the store for 20 minutes, somewhere in a week I noticed in the car that I don’t react to the holder at all, I asked for DRX and the problem was gone. Now very rarely this happens. Maybe the problem in the fingers)
Koshsh94
Message#46
30.04.13, 16:02
Just Kosh
*******
[offline]

Group: Curators
Messages 1242
Check in: 22.09.12
Redmi Note 7 4/64

Reputation:-  147  +

New patch Combo Patch from Druidblack
+ Added "Startup" item to settings.
+ Fixed indicator operation (now while charging the phone, the indicator shows notifications)
+ When reaching 100% charge indicator turns off
+ Returned the three-color charging option indicator
+ Fixed problem with assigning a photo to a contact from the camera
+ Fixed a problem with vibration when dialing a number (it was not a vibration at the end of the call)
+ New design of the SMS application.
Link to download:
Druidblack 1.5.8 Combo Patch
P.S. The patch is compatible with all versions of DRX firmware, the official firmware for ZOPO.100% will not work on REVO firmware
Not compatible with Dronix.
Important: after installation, you must go to "Security - Device Administrators - and tick the box next to" Flip2mute ""

Post has been editedKoshsh94 - 30.04.13, 17:55


--------------------
Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion!
Bobriks
Message#47
30.04.13, 17:29
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0  +

How to install the patch?
Koshsh94
Message#48
30.04.13, 17:33
Just Kosh
*******
[offline]

Group: Curators
Messages 1242
Check in: 22.09.12
Redmi Note 7 4/64

Reputation:-  147  +

Bobriks

Through CWM.


--------------------
Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion!
Bobriks
Message#49
30.04.13, 17:44
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0  +

Vadiman79,
I understood this, set the same way as the firmware? Just specify the archive?
And yet, the data is also all deleted?
Vadiman79
Message#50
30.04.13, 17:53
Inquisitive yuzver
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 713
Check in: 14.11.08
Honor 6x 3/32

Reputation:-  36  +

BoBriks @ 30.4.2013, 18:44*
Vadiman79,
I understood this, set the same way as the firmware? Just specify the archive?
And yet, the data is also all deleted?

The author of the patch always recommends making a backup. Personally, nothing flew in after several patches. Put the patch in the same way as the firmware.


--------------------
Bobriks
Message#51
30.04.13, 21:04
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0  +

Comrades, for some reason on the DRX live wallpaper in the choice is not. I have one so?
2008tgd
Message#52
30.04.13, 21:21
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1745
Check in: 17.10.08
Prestigio Multiphone 5550 DUO

Reputation:-  203  +

BobriksDid you specify their installation with the firmware?


--------------------
"Do good and throw it into the water." My patience is also not unlimited. I answer only questions in PM.
Bobriks
Message#53
30.04.13, 21:59
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0  +

2008tgd,
Theoretically, I don't even remember.
Wolf cup
Message#54
30.04.13, 22:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 107
Check in: 06.07.12

Reputation:-  4  +

BoBriks @ 04/30/2013, 10:33 PM*
Wolf-cup,
When I bought, I checked in the store for 20 minutes, somewhere in a week I noticed in the car that I don’t react to the holder at all, I asked for DRX and the problem was gone. Now very rarely this happens. Maybe the problem in the fingers)

So I also checked the phone in the store for about 25 minutes. I checked everything and everything seemed to work fine, and when I started to use it tightly at home in a relaxed atmosphere and in real conditions, I identified three problems described here:DNS S5301 2SIM - Discussion (Post # 21629238). On the first issue(the other two (lack of sensitivity of the sensor on the couch / bed and problems with playing fullHD-video) are not very significant for me) it was possible to understand that the calibration of the touchscreen failed only after the installation of test programs in which the picture revealed itself. In the store, however, it is not possible to install these programs before purchasing a product, unfortunately. You say that you have a problem with the sensitivity of the touchscreen sensor in the car holder disappeared (in rare cases) after reflashing your smartphone with DRX firmware, and you have problems with the touchscreen calibration curve, as I have on my smartphone, with your copy it wasn’t or was it the same problem on the native firmware, if so, did the DRX firmware cure this problem?

I checked the touchscreen calibration visually today with the addition of the “Multitouch test” program (that’s called in Russian), which finally confirmed everything and showed that the touchscreen calibration is a curve and the more crooked the lower the screen area. :(
Bobriks
Message#55
30.04.13, 22:33
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0    +

Wolf-cup,
Yes, at the very bottom of the screen there are small misses. Somewhere two millimeters in two, with an offset to the bottom, but for example, typing does not bother me at all.
Wolf cup
Message#56
30.04.13, 22:49
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 107
Check in: 06.07.12

Reputation:-  4  +

BoBriks @ 05/01/2013, 05:33*
Yes, at the very bottom of the screen there are small misses. Somewhere a millimeter of two, with a shift to the bottom

This, as I understand it, you have a touchscreen calibration (slip) on the DRX firmware only 2 mm at the bottom of the screen, and on the native firmware, too, only 2 mm was at the very bottom of the screen or was it more? In my native firmware in the middle of the screen, the touchscreen calibration offset is approximately 2 mm downward, but at the bottom of the screen this value reaches 4-5 mm and such a large displacement is already strongly hampered, especially when typing and managing.
Bobriks
Message#57
01.05.13, 06:29
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 12.09.09
ZTE Grand Memo

Reputation:-  0  +

Wolf-cup,
I did not even pay attention to my native firmware.
smtl
Message#58
01.05.13, 06:49
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 239
Check in: 28.04.11
Yota Devices YotaPhone 2

Reputation:-  7  +

1. Run mtkdroidtools
2. go to the root, backup, recovery tab
3. click to prepare blocks for flashtool
4. select the folder with backup, specify files.md5. a folder will appear inside the backup folder! files_to_flashtool
5. run spflashtool
6. click scatter-loading
7. choose scatter from the folder! Files_to_flashtool
8. check that all the jackdaws are set.
9. Click the firmware upgrade, connect the switched off phone.

The firmware does not come out, it is done but not complete, can anyone can upload a ready backup under the flash tool?
Wolf cup
Message#59
01.05.13, 19:13
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 107
Check in: 06.07.12

Reputation:-  4  +

BobriksIn some Android firmwares for smartphones (I don’t mean ours) in the Settings menu, there is a subsection in one of the sections in which you can calibrate the touchscreen of a capacitive screen if it is a “curve” initially. There is no such subsection in the native Android firmware of our smartphone (although it may be, but it is very well disguised by the manufacturer, as well as the subsection of the method described here:DNS S5301 2SIM - Discussion (Post # 21265989)). Is there a similar subsection for touchscreen calibration in DRX firmware or in some other alternative firmware? If someone else knows the answer to this question, please also answer.

Post has been editedWolf cup - 01.05.13, 19:14
frol-aleksan
Message#60
01.05.13, 20:47
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1106
Check in: 08.04.13
Redmi Note 7 4/64

Reputation:-  91  +

can anyone can lay out a ready backup for flash tuls?

Files prepared for a USB flash drive withcompletebackupDNS firmware S5301first modificationon MTK6577 and MTK6620.

We sew in the following way:
1. swingSPFlashTooland backup
2. unpack the whole thing so that the paths do not contain spaces and Russian letters
3. Run SPFlashTool
4. click scatter-loading
5. choose scatter from the folder! Files_to_flashtool
6. check that all the jackdaws are set. If you do not want to affect custom recovery, we do not set the RECOVERY checkbox.
7. Click the firmware upgrade, connect the switched off phone.
8. will require installationpreloader driversif it was not previously installed
9. in case of failure, we distort the battery and try again. The driver can be supplied with the battery removed - it is more reliable because the device will not switch on in the charging mode. Before flashing, the battery must be inserted back.

To recover 1 GB of RAMafter recovery firmware and / or after installing firmware from Zopo ZP900 modification with 512 MB we sew blocks:
PRELOADER,
DSP_BL,
MBR,
EBR1,
UBOOT
LOGO (optional: return the DNS logo to the initial stage of the download; if you do not like it, you can not sew), the rest of the jackdaws must be removed.

Before flashing, save all important data from the phone’s memory (applications, application data, phonebook and SMS databases, user files), as they will be irretrievably lost!

Backup removed from already used phonetherefore, it has installed applications, as well as phone numbers and SMS.

Notes:
1. After flashing this backup, the device will slow down and the devices of the phone will not work (speakers, vibro, etc). These are the consequences of receiving a temporary root. Why after it the device starts to glitch - I don’t know, but I came across it repeatedly.
Nothing wrong with that, just after the firmware, go to the recovery and make a data / factory reset.
2. After flashing and wipes, the phone will have the state of the factory: original memory markup (512 MB for applications and 2 GB for user files), stock recovery (robot with an open belly), booty from DNS, no root.
3. If Custom Recovery has been installed before, and the jackdaw has not been removed from the RECOVERY block, then it will need to be re-sewn in accordance with the instructions for its firmware.
4. After flashing this backup, there will be left IMEI numbers. How to return the original without the root - I can not imagine.


Post has been editedfrol-aleksan - 23.04.14, 20:39
Reason for editing: UPD + post renewal


--------------------
DNS S5301 (repack flow 4.1.2 from DNS S5301M) ->DNS S5301Q (sink 4.2) ->DEXP ML150 (stock 5.1 v1.3) ->Redmi Note 7 (stock 9.0 + MIUI 10), Gmini Z6 (Gmini Z6 v.6.7), Canon 600D (Magic Lantern Nightly Build 04/19/2015)
Koshsh94
Message#61
02.05.13, 20:58
Just Kosh
*******
[offline]

Group: Curators
Messages 1242
Check in: 22.09.12
Redmi Note 7 4/64

Reputation:-  147  +

So, the promised instructions for restoring the factory firmware without root and ZOPO logo.

In general, the first time I strangely managed to recover to the stock through a backup from the header (made by someone from users) using Flashtool. It was deep at night, more precisely in the morning, it happened a million times, so I did not manage to restore the algorithm : lol:
But now, having finished the lyrical stupefaction, here is a working method:
1.Through CWM version 6 (with version 5 will not work, I think there will be no problems with LEWA CWM)restore backup factory firmware(it with stitched CWM 6)
2. Those who have been stitched with the firmware for ZOPO will most likely have a corporate logo. To restore the DNS logo and standard recovery,download this archive, extract, launch Flashtool, press scatter-loading, select the file MT6577_Android_scatter_emmc from the archive folder (IMPORTANT! Cyrillic should not be in all paths)
3. Next, tick only the logo and recovery items, click Download.
4.When we turn off the phone, we distort the battery and connect it to the PC. (IMPORTANT! Must be installed drivers on Preloader)
5.If everything is done correctly, Flashtool will see the phone and start flashing selected files (the end of the firmware is confirmed by a message with a green circle and the signature Ok)
6. Actually everything, you have a phone with factory firmware, without root and CWM;)

Post has been editedKoshsh94 - 02.05.13, 21:05


--------------------
Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion!
DNS
 

250 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 18:41