Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
DNS S5301 \ DNS S5301M \ DNS S5301Q - Official firmware and their modifications |
Message#2 19.04.13, 11:45 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | The first way of redistributing memory is now 2.5 gigabytes, without any extra memory cards. through titanium backup we save all the data through moderation we put itZOPO_900_disable_internal_sdcard.zip(140.1 KB) 1.) Turn off the smartphone. The cable is not connected to the computer. 2). Remove and insert the battery back. 3). (skip if the drivers are already installed) Connect the phone to the computer with a cable. The operating system will find a new device - specify the system folder with the driver MT6575 USB VCOM (for its version of the OS). If something does not work with the installation of drivers, then use this method of installing drivers. four). (skip if the drivers are already installed) Disconnect the cable from the computer. five). Run the program SP Flash Tool. 6). Click on the Scatter-loading button and select the file MT6577_Android_scatter_emmc.txt, it lies inZOPO_900_extended + userdata.rar(4.93 MB) I unpack the archive beforehand, I just threw it onto drive C. 7). Click the Download button. eight). We connect the phone to the computer with a cable. The program should see it and start the firmware. If the phone is not found, then disconnect it from the computers, remove and insert the battery and reconnect to the computer. 9). After the end of the firmware turn off the phone 10.) go into the recovery and do wipe data / factory reset, then sew it -titanium.zip(3.18 MB) 11.) reboot, enter titanium backup and restore all data The method is not mine, taken from the branch of the smart-progenitor of our DNS Attached files Flashtool_4.0.rar(4.26 MB) MT6575 USB VCOM drivers.rar(10.66 KB) Post has been editedKoshsh94 - 19.04.13, 11:51 -------------------- Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion! |
Message#3 19.04.13, 11:55 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | The second method is the redistribution of memory for DNS S5301. A new way of redistributing memory with options is the HKPHONE-ROM-EDIT program to take hereHKPHONE-ROM-EDIT.apk(52.91 KB) After choosing what volume you need, you need to do wipe data / factory reset - Attention only after that the memory will be displayed correctly BUT you will lose all the installed programs on a clean firmware Translation of program items: Translation of program items There are 5 custom memories for you one). 500 MB of internal memory, 2 GB of memory 2). 1 GB of internal memory, 1.5 GB memory cards 3). 2 GB of internal memory, memory cards for 500 MB four). 2.5 GB of internal memory, 55 MB memory cards (my choice) five). 3 GB of internal memory, remove the memory card in Good luck !!!! (do not forget to backup applications) Post has been editedKoshsh94 - 19.04.13, 11:56 -------------------- Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion! |
Message#4 19.04.13, 14:24 | |
Inquisitive yuzver [offline] Group: Friendssavagemessiahzine.com Messages 711 Check in: 14.11.08 Honor 6x 4/64 Reputation: 36 | -------------------- |
Message#5 22.04.13, 10:14 | |
Inquisitive yuzver [offline] Group: Friendssavagemessiahzine.com Messages 711 Check in: 14.11.08 Honor 6x 4/64 Reputation: 36 | Released patch 1.5.6.1 for DRX firmware. More about the patch Download patch Post has been editedVadiman79 - 22.04.13, 10:16 Reason for editing: Specified patch number -------------------- |
Message#6 23.04.13, 15:32 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | Details of getting root: 1.We download and install the program MTKDroidTools (it is important that when installing and working with the program it is better to disable the antivirus just in case) \ 2.In the phone settings, we enable USB debugging and unknown sources. 3.Connect the included phone to the PC, check in the device manager, as it was determined, should be like this: screen if the smart is not defined, then install drivers for Android Drivers ADB mode 4. Run the MTKDroidTools program (I ran as administrator), it should read the data from the phone (the left window of the program), a blue indicator will appear at the bottom left. We press the button ROOT 5. In the lower right corner of the program window on the phone screen, click the "recover data ..." button The program will run a green bar 6. Next, the phone will reboot and the program again reads the data from it, and agree to all the dialogs of the program by pressing the "YES" button. The program will notify that SuperUser is installed (right window). That's it, we have a root. Ruth is obtained by analogy with FlyIQ450, the instruction is taken from its topic. Attached files MTKdroidTools_v230.exe(4.33 MB) Android_Drivers.zip(8.3 MB) Post has been editedKoshsh94 - 23.04.13, 15:33 -------------------- Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion! |
Message#7 23.04.13, 15:41 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | Video instructions for installing a modified recovery (on Zoppo Leader, we have an identical) tyk -------------------- Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion! |
Message#8 23.04.13, 18:46 | |
Inquisitive yuzver [offline] Group: Friendssavagemessiahzine.com Messages 711 Check in: 14.11.08 Honor 6x 4/64 Reputation: 36 | It would be necessary to add a link to the new version of the DRX 1.8.1 firmware in the header. You can also add patches to the header. Post has been editedVadiman79 - 23.04.13, 18:46 Reason for editing: Typo -------------------- |
Message#9 23.04.13, 19:50 | |
a guest [offline] Group: Users Messages 7 Check in: 02.07.08 Sony Xperia T2 Ultra Dual Reputation: 0 | MIUI what is the firmware? Poke where to read about it. |
Message#10 23.04.13, 20:20 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | |
Message#11 23.04.13, 21:33 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | Detailed instructions for the firmware program SP Flash Tool. 1.We download drivers for Preloader (there are drivers for all versions in the archive) -Tyts 2.Raspakovyvay archive and the drivers folder, copy to the root of the disk (the path should be something like this -C: \ drivers) 3. Download the program SP Flash Tool -Tyts 4. Download the firmware under the SP Flash Tool and unpack it to disk (the path should be something like this -From: \ DNSS5301 ) IMPORTANT!!! On the way to the program, firmware, drivers - there should not be Cyrillic only Latin letters. 5. Turn off the phone, tweak the battery, connect the USB to the phone, but so far we do not connect to the PC. 6. Run the program Flash_tool.exe on behalf of the administrator - click on the Scatter-loading tab, go on the way to the folder with the firmware and select the fileMT6577_Android_scatter_emmc.txt(the file may have a different name, but must contain the word scatter. (Next, the firmware files will open - where we tick the files you need for the firmware (if you don’t select all the files, then a warning window pops up when you start the firmware - just click OK) PROGRAM READY FOR FIRMWARE. Now, we need to install the Preloader driver "a. Open the Device Manager on your computer and do not minimize it. In the program, click the Download button and immediately connect the phone to the PC. In the Device Manager, a new device should appear. We have 5 seconds to intercept it, right click on it and select the tab "Update (install) driver" - "Search for drivers on this device" - "Select driver from the list of already installed drivers" - "Install from disk" - "Browse" and specify the path to the drivers - go to the folder with the name of your OSes and select the file in itusb2ser_Win764.inf- the firmware program gives 15 seconds to all these actions and if no firewood is found, a window pops up with an explanation and the program is turned off. If you didn’t have time the first time - disconnect the phone from the computer, distort the battery and do it all over. Post has been editedKoshsh94 - 24.12.13, 01:10 -------------------- Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion! |
Message#12 24.04.13, 16:55 | |
Novice [offline] Group: Active users Messages 35 Check in: 22.04.13 Reputation: 1 | Good day! What will the firmware give? |
Message#13 24.04.13, 18:56 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 371 Check in: 19.11.11 Reputation: 23 | How to make a normal sound in the radio on the last left? (very quietly, in the player several times louder) How to run 3G, for any settings, only 2G .. places changed places. |
Message#14 25.04.13, 00:53 | |
Visitor [offline] Group: Active users Messages 27 Check in: 13.03.10 Asus p526 Reputation: 2 | [email protected], 02:56 How to make a normal sound in the radio on the last left? (very quietly, in the player several times louder) I am very afraid to blunt it now, if the opinion is not competent, then the curator will remove it !!! I assume that on your firmware the engineering menu is the same; if so, then: 1. We dial in the call*#*#3646633#*#* We get into the engineering menu (not all dialers support the transition to the engineering menu, at one time I used "Angel Dialer", she just tried to call her " 2. Audio \ Headset Mode(headset mode) 3. In paragraphTourchoose from the dropdown menuFMR 4. In pointLevelFrom the drop-down menu, in turn, select each item and change the values ​​in the itemValueand every time an item changesValueconfirm the value by pressingSet. In general, it should be something like this: Level 0 0 Level 1 80 Level 2 100 Level 3 120 Level 4 140 Level 5 180 Level 6 200 You can make the values ​​and smaller and bigger depends on the comfort of sound ... -------------------- Ericsson R520m ->Sony Ericsson K700i ->ASUS P526 ->HTC Desire S ->Sony Ericsson C702 ->DNS S5301 ->... |
Message#15 25.04.13, 13:53 | |
Novice [offline] Group: Active users Messages 37 Check in: 31.05.12 Acer Iconia Tab A100 Reputation: 0 | Write a detailed installation off of the backup from the header which, otherwise it does not work :( -------------------- |
Message#16 25.04.13, 16:46 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1094 Check in: 08.04.13 DEXP Ixion ML150 Amper M Reputation: 91 | MakL1ght, 1. Run mtkdroidtools 2. go to the root, backup, recovery tab 3. click to prepare blocks for flashtool 4. select the folder with backup, specify files.md5. a folder will appear inside the backup folder! files_to_flashtool 5. run spflashtool 6. click scatter-loading 7. choose scatter from the folder! Files_to_flashtool 8. check that all the jackdaws are set. 9. Click the firmware upgrade, connect the switched off phone. -------------------- DEXP Ixion ML150 Amper M (Android 5.1 v1.3), Nokia E60 (lying at home with a backup sim card), Gmini Z6 (Gmini Z6 v.6.7), DNS EB601 (firmware from Gmini Z6 v.6.7), DNS EB603 (firmware from Digma E624), Canon 600D (Magic Lantern Nightly Build 04/19/2015) |
Message#17 25.04.13, 16:58 | |
Novice [offline] Group: Active users Messages 37 Check in: 31.05.12 Acer Iconia Tab A100 Reputation: 0 | |
Message#18 25.04.13, 18:36 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 514 Check in: 08.02.12 Samsung Galaxy Note 3 SM-N900 Reputation: 10 | I think it is necessary to paint in the cap the pros and cons of each firmware. And then I went to the topic, I smack into a hat and I don’t see anything other than links ... And what to choose, what for is necessary, it’s not clear ... -------------------- Besides the fact that I am the best, I am nothing better than others! |
Message#19 25.04.13, 20:09 | |
Just Kosh [offline] Topics Curator Group: Curators Messages 1238 Check in: 22.09.12 UMIDIGI Z2 Pro Reputation: 146 | xobat The cap is under development, the theme and there is no week yet. As I have free time, I add. Post has been editedKoshsh94 - 25.04.13, 20:09 -------------------- Man's sensitivity to trifles and insensitivity to the most important - is this not a sign of monstrous perversion! |
Message#20 26.04.13, 08:59 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1094 Check in: 08.04.13 DEXP Ixion ML150 Amper M Reputation: 91 | All I forget to ask is: didn’t anyone on our device have tried the thoroughbred ZP900? 2008tgd, Spoiler with drivers and utilities in this thread was. But for some reason it was removed. Although really he would not have prevented. Post has been editedfrol-aleksan - 26.04.13, 09:02 Reason for editing: adding -------------------- DEXP Ixion ML150 Amper M (Android 5.1 v1.3), Nokia E60 (lying at home with a backup sim card), Gmini Z6 (Gmini Z6 v.6.7), DNS EB601 (firmware from Gmini Z6 v.6.7), DNS EB603 (firmware from Digma E624), Canon 600D (Magic Lantern Nightly Build 04/19/2015) |
Message#21 26.04.13, 20:35 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 514 Check in: 08.02.12 Samsung Galaxy Note 3 SM-N900 Reputation: 10 | Koshsh94, [email protected], 23:09 The cap is under development, the theme and there is no week yet. As I have free time, I add. )) already understood. I read the thread of the discussion of the body. Advise how to stow something? : blush: -------------------- Besides the fact that I am the best, I am nothing better than others! |
mobile version | Now: 04/18/19, 16:04 |