[X]Assistant

[andrewww97]

Samsung Galaxy S II Plus GT-I9105 / P - Firmware
GT-I9105, GT-I9105P
Description | Discussion пїЅ | FAQ | Accessories пїЅ | Modification of software and decorations пїЅ | Owners Club пїЅ | power usage пїЅ | Firmware OS CyanogenMod (v. 10, 11 - 12) пїЅ | Firmware пїЅ

mini-FAQ

Q: How to enter recovery?

A download

: Turn off the device, hold the buttons together "Vol +"+"Home"+"Power". Hold until the inclusion of the logo (the inscription of the model on a black background).

Q: How to enter Odin Mode?
A: Turn off the device, hold the buttons together "Vol-"+"Home"+"Power". Hold until a warning appears that the firmware may damage your device. Agree by clicking"Vol +".

Q: What does wipe mean?
A: Clear partition.

Q: How to make a complete reset of the device to the factory settings?
A: You can go to Settings - Backup - Full reset, and you can go to recovery, go to the "wipe data / factory settings", go to the "yes ..." and confirm the reset.

Q: How to reset the firmware counter?
A: You must have root-rights. Install the programTriangle away, we start. Below are the lines "Current Status" with the current status of the phone and the counter of firmware and "Reset flash counter". We reset the counter, we check, again going into the program and checking the item "Current Status". Then we sew the stock firmware through Odin, wait until everything is loaded, go to Settings - Backup - Full reset, confirm, wait until everything is finished and the device boots. Now you have the official status of the device and the firmware counter to 0.

Q: wipe cache on stock recovery leads to a reboot?
A: There is such a bug, the reason is unknown, it is observed only on Android 4.2.2.

Q: Waiting time with firmware / after firmware before powering on?
A: Full firmware through Odin lasts, on average, 7 minutes. The first inclusion can take up to 7 minutes, depending on whether the wipe was made.

Q: Is it possible to install firmware / decorations / mods from Samsung Galaxy S II I9100?
A: You can not, because These are two completely different devices.

Q: Can I install firmware from I9105P to I9105 and vice versa?
A: Not. For your model, install only your firmware, if you install from another - there will be a brick. These versions have a difference between themselves (NFC module), so the firmware of these devices are not compatible with each other.

Q: I want to remove system applications. What do you need to do for this?
A: The first and most important thing is to study at least a bit the Android system device, in which sections it is stored so as not to remove anything superfluous. Next get root-rights. Next you need to see the list of applications that can be safely removed. And through the file manager, or through applications designed to be deleted, start deleting what is not needed. The main thing is not to remove what you need, carefully review the list of applications that can be deleted. All information is here in the header.

Q: How can I update the firmware?
A: It is possible through OTA (via phone), it is possible through Kies, and it is possible through Odin. OTA, Odin - recommended methods.

Q: Will the data remain with the firmware through Odin?
AA: Yes, if the firmware does not auto-clean.

Q: I stitched Android 4.2.2. How to roll back to Android 4.1.2?
A: Flash service firmware for your model (firmware spoiler - Other)

Q: After the firmware / update, the device is unstable, applications are crashing, etc.
A: Reset to factory settings (wipe data). There is a conflict of settings, data applications. Sometimes wipe cache can help.

Q: Where are the developer options in Android 4.2.2?
A: Go to Settings - About phone and press 7 times on the Build number.

Q: Can I update via Kies / OTA if you have root-rights?
A: It is possible, but most likely it will not work, a message will appear that the device has been changed. And if it will be possible - when updating the root-rights will fly off.

Q: How can I get root-rights?
A: Pay attention to the spoiler Instructions.

Q: Will root-rights fly off with firmware stock firmware?
A: Yes, fly off.

Q: What is "efs" and why should I back it up?
A: A system partition containing all unique numbers and device addresses (IMEI, BT, WIFI, etc.). After receiving the root-rights, it is recommended to make a backup of this section (there is an instruction in the header). If you lose your IMEI with unsuccessful firmware or as a result of other actions, you can restore it without a backup only in the SC. And so, you can quickly and painlessly restore it from the river.

Q: What is the difference between firmware for CIS countries: SER, SEK, RTL, SKZ, CAC?
A: answer

Drivers and Utilities

• SAMSUNG USB Driver for Mobile Phones v.1.5.61
  
• AMSUNG Android ADB Interface Driver 2.11.7.0
  
• USB driver: Samsung_USB_Drivers_for_Mobile_Phones_1.5.27.0.exe(14.65 MB)
  
• Odin: Odin_3.07.zip(1.15 MB)
  
  
• Samsung kies: Link
  
• Android SDK: Link

Instructions

• Installing custom recovery and getting root-rights
  
• Getting root rights through Kingo Android Root
  
• Instructions for firmware through Odin
  
• Instructions for custom firmware firmware recovery (CWM)
  
• EFS Backup: method 1, method 2, method 3
  
• Instructions for transferring game / application caches to a USB flash drive
  
• List of system apk available for safe removal
  
• Expansion of internal memory (section data)

Firmware

Discussion:- Firmware CyanogenMod 10. 10. 12. 13 -(Available)

Stock

SINGLE-FILE STOCK FIRMWARE (SEK; Ukraine) FOR GT-I9105


• [I9105P | 4.2.2 | I9105PXXUBNG1 | 7.2014 | SEB] - Mail.ru
  
• [I9105 | 4.2.2 | I9105XXUBND1 | 5.2014 | SER] - Mail.ru

All firmware:

• I9105: Samsung-updates, Sammobile
  
• I9105P: Samsung-updates, Sammobile

Older versions

• [I9105 | 4.2.2 | I9105XXUBML1 | 12.2013 | SER] - Yandex.Disk
  
• [I9105 | 4.2.2 | I9105XXUBMH4 | 08.2013 | SER] - Google drive, Yandex.Disk
  
• [I9105P | 4.2.2 | I9105PXXUBMG8 | 07.2013 | DBT] - Google drive, Yandex.Disk
  
• [I9105P | 4.2.2 | I9105PXXUBMI1 | 09.2013 | DBT] - Terafile

Custom

Based on stock

• [I9105 | Provision_V5 | 4.2.2] - savagemessiahzine.com
  
• [I9105 & P | ExSlim | 4.2.2] - savagemessiahzine.com
  
• [I9105P | StockRom Series | 4.2.2] - XDA
  
• [I9105P | S.A.Z.Y-ROM | 4.2.2] - XDA
  
• [I9105P | MEHDI ROM | 4.2.2] - XDA
  
• [I9105 | Light_ROM | 4.2.2] - savagemessiahzine.com
  

Third Party

• ResurrectionRemix M Optimization FX v5.7.4post fromVeisons
  
• [ROM] [6.0.1] [UNOFFICIAL] OmniROM -XDA
  
• [ROM] AICP - 11.0 - MM 6.0.1_r43 | UNOFFICIAL - XDA
  
• [I9105 / P | Resurrection Remix | 6.0.x] - XDA
  
• [I9105 & P | [ROM] [6.0.0] Android MarshMallow Pure AOSP - XDA- Clean Android 6.0, without any modifications (In processing)
  
• [I9105 & P | AICP | 5.1.1] - XDA
  
• [I9105 & P | OmniROM | 4.4.2] - XDA, savagemessiahzine.com
  
• [I9105 & P | AOSB Project | 4.4.2] - XDA
  
• [I9105 & P | LiquidSmooth | 4.4.2] - XDA
  
• [I9105 | MIUI | 4.1.2] - savagemessiahzine.com
  
• [I9105 | MIUI | 4.4.4] - savagemessiahzine.com
  
• [I9105 & P | AxxionKAT | 4.4.3] - XDA (I9105P), XDA (I9105)
  
• [I9105 / P | Resurrection Remix | 4.4.2] - XDA (I9105P), XDA (I9105)
  
• [I9105 / P | Resurrection Remix | 5.0.x] - XDA
  
• [ROM] [5.0.2] [BLISSPOP] [OFFICIAL] [I9105 / I9105p] - XDA
  
• [ROM] [5.0.1] OmniROM for GT-I9105 / P Initial Build - XDA
  
• [ROM] [5.0.1] [alpha 1] liquidsmooth v4 [10/12/2014] - XDA
  
• [ROM] [UNOFFICIAL] [4.4.4] [GT-I9105 / P] [AOSPA] ParanoidAndroid 4.6-BETA6 - XDA
  
• [ROM] [OFFICIAL] [KitKat 4.4.4] [GT-I9105 / P] PAC-ROM FINAL KK RELEASE - XDA
  
• [ROM] [CosmicCM-4.4.4] [V5.6] - XDA
  

Recovery

Stock Recovery

SINGLE-FILE STOCK FIRMWARE (SEK; Ukraine) FOR GT-I9105

• [I9105 | 4.1.2]: link
  
• [I9105P | 4.2.2]: link
  cwm 4.1.2 for i9105CWM_6.4.5_ [I9105] _ [4.1.2] _ODIN.tar
  CWM 4.1.2 for I9105PCWM_6.4.5_ [I9105] _ [4.1.2] _ODIN.tar

Custom recovery

[CWM | I9105 | 4.2.2 | Odin] - CWM_6.4.5_ [I9105] _ [4.2.2] _by_CoolDevelopment.tar(7.12 MB)

[CWM | I9105 | 4.2.2 | Recovery] - CWM_6.4.5_ [I9105] _ [4.2.2] _by_CoolDevelopment.zip(7.31 MB)

[CWM | I9105P | 4.2.2 | Odin] - CWM_6.4.5_ [I9105P] _ [4.2.2] _by_CoolDevelopment.tar(7.12 MB)

[CWM | I9105P | 4.2.2 | Recovery] - CWM_6.4.5_ [I9105P] _ [4.2.2] _by_CoolDevelopment.zip(7.31 MB)


TWRP 3.1.1-0 for I9105 / P
TWRP-3.0.3.0
TWRP 3.0.2.0 for both I9105 devices (P)
TWRP 2.8.7 for both I9105 devices (P)
For9105installation throughTWRPorCWM: TWRP_2.8.7_s2ve.zip (7.5 MB)
Installation throughOdin: twrp-2.8.7.0-s2ve.img.tar (7.29 MB)

For9105Pinstallation throughTWRPorCWM: TWRP_2.8.7_s2vep.zip (7.5 MB)
Installation throughOdin: twrp-2.8.7.0-s2vep.img.tar (7.29 MB)

Root

BETA-SuperSU-v2.27.zip

Core

• [GT-I9105 & P | Stock | 4.2.2]: VSMC (Very-Super-Mega-Cool Kernel)
  
• [GT-I9105 & P | AOSP | 4.4.2]: MoshKernel

AuthorGhsr possible post changes: Custom kernelnebula
This is the same core of the nebula withxdaOnly collected under the new firmware:
CM-11 M12, CM-12, Resurrection Remix 5.2.x, BLISSPOP, LiquidSmooth, OmniROM 5.0, AICP.
The version for stock 4.2.2 is also compiled, the archive name starts with "nebula-v3.20-stock-"
If the firmware does not have built-in performance tuning tools, then download itВ® Performance Control
Installation:
1. Install the archive through the recovery.
2. Make a reset cache (wipe cache / wipe dalvik cache).
3. Reboot.
Download: YandexDisk

AuthorGhsr possible post changes: Custom kernelMoshKernel 1.9.2
This is the same core withxdaOnly collected under the new firmware:
CM-11 M12, CM-12, Resurrection Remix 5.2.x, BLISSPOP, LiquidSmooth, OmniROM 5.0, AICP.
On these firmwares, the kernel will work.
If the firmware does not have built-in performance tuning tools, then download itВ® Performance Control
Installation:
1. Install the archive through the recovery.
2. Make a reset cache (wipe cache / wipe dalvik cache).
3. Reboot.
Download: YandexDisk

Other / useful

- Solution error:E: Error executing updater binary in zip ...

• Rutted firmware
  
• Service firmware
  
• Dump stock firmware I9105XXUBML1
  
• Files from the stock firmware I9105 XXI9105XXUBNC1

Poll results

Gapps: = Gapps / 4.4 / 5.0 / 5.1 =

Post has been editedAlladin. - 08.07.18, 13:03

Reason for editing: TWRP 3.1.1-0 for I9105 / P

[egan95]

4.2.2. Is it possible to connect the phone in USB-drive mode (like a USB flash drive)?

[Heroy44]

Official:

• I9105PXXUBMG8_I9105POXABMG8_DBT4.2.2
  
• CHN-I9105PZCAMI14.1.2[last]
  

Gradually I will add.
P.S. Firmware is compressed into a double archive to reduce weight, check extensions before unpacking and installing.

Post has been editedHeroy44 - 03.10.13, 17:55

[alexseyuh]

If you need to view img firmware images under Windows without any problems.
Get something from there, view, view in the HEX editor, etc ...
Nadybal excellent utility!
All info on the download site:

http://sourceforge.net/projects/androidicsjbext/?source=dlp


ext4_unpacker_exe.zip(2.29 MB)


Post has been editedalexseyuh - 06.10.13, 00:17

[alexseyuh]

Those who want to create (assemble) their image, for example, system.img for subsequent packaging into tar and firmware through One 3, you need:
Installed UBUNTU, preferably 64 bit version.
AND:
1 Put the necessary packages:

sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc

2 Downloadext4_utils.zip(56.71 KB)
, unpack it into the home directory and open the folder in the terminal, collect the utility:

cd ext4_utils
make
cd ..

We put our experimental image in the folder with the utility.
3 Convert to a format understandable to Linux, create a temporary folder and mount the system partition image into it:

./ext4_utils/simg2img system.img system.raw
mkdir sys
sudo mount -t ext4 -o loop system.raw sys

4 After executing these commands, we will have a mounted image in the sys folder.
To edit system.img (delete some files, make a deodex, etc.) we need the following commands.

sudo su
sudo nautilus

That bish all movements with the mounted image are done under the root !!!
5 Next, collect back:

sudo ./ext4_utils/make_ext4fs -s -l 1610612736B -a system system-repack.img sys
sudo umount sys

1610612736B - image size for 9105 / 9105СЂ
6 Rename from system-repack.img to system.img, pack into tar and sew))

Post has been editedalexseyuh - 06.10.13, 00:57

[maloi4455]

alexseyuhBut is there a same kernel assembly manual?

[alexseyuh]

maloi4455
http://fastandclever.ru/google-android/kom...ndk-ili-linaro/

[igorek61rus]

I installed the "Provision_V4" author a few days ago Thanks again, I am satisfied with the firmware. Indeed, the firmware is very soft in setting, you can really set everything up, for those who have not installed it, I’ll say that I don’t advise you to touch the additional settings with a separate label with the Wanam Xposed module. Everything works fine.
The battery actually holds 3 times longer than on the drain. I also liked the new battery icons, network levels, etc. melodies are not really, for an amateur although this is not a problem The phone sounds louder, really louder. Turned off this crap with a growing signal. In headphones, the sound is not bad. Putting away the sound of the camera and the warning of a low charge, it always annoyed me when I used the camera.
If I notice bugs, I will unsubscribe.
In general, I advise the firmware to everyone. Author Respect.
Heard it will soon Provision_V5? I wonder when and what will change?

Post has been editedigorek61rus - 07.10.13, 16:18

[antobulah]

People, help, why can not I reinstall the firmware 4.1.2 after installing 4.2.2? which just did not try :(

[Osypok]

antobulah @ 10/09/2013, 10:51

People, help, why can not I reinstall the firmware 4.1.2 after installing 4.2.2? which just did not try :(

Three-file request.

[maloi4455]

Guys, I screwed up. The memory has changed places, but the applications are not installed in any way. Can anyone help ....
#! / system / bin / sh
# extsd2internalsd modification
#by Maloi4455

sleep 10
mount -o remount, rw /
mount -t vfat -o umask = 0000 / dev / block / vold / 179: 9 / mnt / sdcard
mount -t vfat -o umask = 0000 / dev / block / vold / 179: 9 / storage / sdcard0
sleep 30
mount -o bind / data / media / mnt / extSdCard
mount -o bind / data / media / storage / extSdCard
chmod 777 / mnt / extSdCard
sleep 30
mkdir -p / mnt / extSdCard / external_sd / sdcard1
touch /mnt/extSdCard/external_sd/.nomedia
sleep 10
mount -o bind / storage / sdcard0 / mnt / extSdCard / external_sd / sdcard1
exit

[maloi4455]

alexseyuh @ 10/11/2013, 0:38

maloi4455
There seems to be in data / data

Samsung GT-N7100 Galaxy Note II - Custom firmware (OS 4.1) (Post # 20875884)

I'm sorry, I did not get it.

[alexseyuh]

maloi4455
He asked the guys, said the sleep parameter should be selected from 5 to 10 in the area.

[Tyskliy]

How to remove protection from the obb folder? Ruth is right.

[powermen27]

Tyskliy 10.10.2013, 20:48

How to remove protection from the obb folder? Ruth is right.

Neither.

[Otamanuk]

I flashed the phone number of my wife "Provision V4", although in the information about the phone I wrote: "V 3". Well, after the firmware I immediately realized that she would not like it: P, it’s all very “for boys”, and it turned out that in the evening I’ll have to sew something else.
Although if the firmware were unisex, it would not have been the price!
From myself I’ll say that I didn’t like it either: the icons in the status bar (it’s like the name at the top of the screen) are called; The "line of light" (I don't know how else to call it) in the background cuts the eye and distracts; The "heifer" is superfluous, the string of the alphabet in the Contact is not complete. Melodies ... but something like that. All on the rights of IMHO!
The rest is smooth and pleasant. Thanks for the effort!

Post has been editedOtamanuk - 11.10.13, 12:21

[maloi4455]

Otamanuk @ 10/11/2013, 20:20

I flashed the phone number of my wife "Provision V4", although in the information about the phone I wrote: "V 3". Well, after the firmware I immediately realized that she would not like it, everything is very “for boys”, and it turned out that in the evening I would have to sew something else.
Although if the firmware were unisex, it would not have been the price!
From myself I’ll say that I didn’t like it either: the icons in the status bar (it’s like the name at the top of the screen) are called; The "line of light" (I don't know how else to call it) in the background cuts the eye and distracts; The "heifer" is superfluous, the string of the alphabet in the Contact is not complete. Melodies ... but something like that. All on the rights of IMHO!
The rest is smooth and pleasant. Thanks for the effort!

To begin with, dot all i's:
First: I collect the firmware for myself;
Secondly: all the graphics are just what I like;
Thirdly: I already torment my phone with flashing 100 times a day (and maybe more).
So all your questions in terms of design, I will pass over the ears, I am the only person who does at least something ....
Py.Sy and if it is direct absolutely unbearable and I want something of my own in my assembly waiting for me in a personal. All agree? :savagemessiahzine.com:

Post has been editedmaloi4455 - 11.10.13, 19:08

Reason for editing: spelling her mother's foot

[Otamanuk]

I expressed my opinion about the firmware! Since he himself sewed in blind and would be glad to read reviews about her. It is clear that everyone wants to hear only the good. Well, at the same time, everyone does not immediately please! So, this is a reason to make a variety of assembly!
Thank you for your hard work! : blush:

[maloi4455]

Otamanuk,
I will consider criticism: thank_you:
thank

[Advanced Grandfather!]

maloi4455keep it up. Only forward. A design from hereSamsung GT-I9100 Galaxy S II - Self-made firmwarewill not work?

Post has been editedpetr.biriuk - 11.10.13, 19:41

[slaves2009]

I put the root on the phone. Now I want to give it under the guarantee. What should I do to not know about it in SC?