> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


400 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Samsung GT-I9105 (I9105P-NFC) Galaxy S II Plus - Firmware
andrewww97
Message#1
16.04.13, 18:29
just kidding
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 799
Check in: 08.02.11
Google nexus 5

Reputation:-  133  +

Samsung Galaxy S II Plus GT-I9105 / P - Firmware
PictureGT-I9105, GT-I9105P
Description | Discussion � | FAQ | Accessories � | Modification of software and decorations � | Owners Club � | power usage � | Firmware OS CyanogenMod (v. 10, 11 - 12) � | Firmware �

mini-FAQ
Q: How to enter recovery?

A download

: Turn off the device, hold the buttons together "Vol +"+"Home"+"Power". Hold until the inclusion of the logo (the inscription of the model on a black background).

Q: How to enter Odin Mode?
A: Turn off the device, hold the buttons together "Vol-"+"Home"+"Power". Hold until a warning appears that the firmware may damage your device. Agree by clicking"Vol +".

Q: What does wipe mean?
A: Clear partition.

Q: How to make a complete reset of the device to the factory settings?
A: You can go to Settings - Backup - Full reset, and you can go to recovery, go to the "wipe data / factory settings", go to the "yes ..." and confirm the reset.

Q: How to reset the firmware counter?
A: You must have root-rights. Install the programTriangle away, we start. Below are the lines "Current Status" with the current status of the phone and the counter of firmware and "Reset flash counter". We reset the counter, we check, again going into the program and checking the item "Current Status". Then we sew the stock firmware through Odin, wait until everything is loaded, go to Settings - Backup - Full reset, confirm, wait until everything is finished and the device boots. Now you have the official status of the device and the firmware counter to 0.

Q: wipe cache on stock recovery leads to a reboot?
A: There is such a bug, the reason is unknown, it is observed only on Android 4.2.2.

Q: Waiting time with firmware / after firmware before powering on?
A: Full firmware through Odin lasts, on average, 7 minutes. The first inclusion can take up to 7 minutes, depending on whether the wipe was made.

Q: Is it possible to install firmware / decorations / mods from Samsung Galaxy S II I9100?
A: You can not, because These are two completely different devices.

Q: Can I install firmware from I9105P to I9105 and vice versa?
A: Not. For your model, install only your firmware, if you install from another - there will be a brick. These versions have a difference between themselves (NFC module), so the firmware of these devices are not compatible with each other.

Q: I want to remove system applications. What do you need to do for this?
A: The first and most important thing is to study at least a bit the Android system device, in which sections it is stored so as not to remove anything superfluous. Next get root-rights. Next you need to see the list of applications that can be safely removed. And through the file manager, or through applications designed to be deleted, start deleting what is not needed. The main thing is not to remove what you need, carefully review the list of applications that can be deleted. All information is here in the header.

Q: How can I update the firmware?
A: It is possible through OTA (via phone), it is possible through Kies, and it is possible through Odin. OTA, Odin - recommended methods.

Q: Will the data remain with the firmware through Odin?
AA: Yes, if the firmware does not auto-clean.

Q: I stitched Android 4.2.2. How to roll back to Android 4.1.2?
A: Flash service firmware for your model (firmware spoiler - Other)

Q: After the firmware / update, the device is unstable, applications are crashing, etc.
A: Reset to factory settings (wipe data). There is a conflict of settings, data applications. Sometimes wipe cache can help.

Q: Where are the developer options in Android 4.2.2?
A: Go to Settings - About phone and press 7 times on the Build number.

Q: Can I update via Kies / OTA if you have root-rights?
A: It is possible, but most likely it will not work, a message will appear that the device has been changed. And if it will be possible - when updating the root-rights will fly off.

Q: How can I get root-rights?
A: Pay attention to the spoiler Instructions.

Q: Will root-rights fly off with firmware stock firmware?
A: Yes, fly off.

Q: What is "efs" and why should I back it up?
A: A system partition containing all unique numbers and device addresses (IMEI, BT, WIFI, etc.). After receiving the root-rights, it is recommended to make a backup of this section (there is an instruction in the header). If you lose your IMEI with unsuccessful firmware or as a result of other actions, you can restore it without a backup only in the SC. And so, you can quickly and painlessly restore it from the river.

Q: What is the difference between firmware for CIS countries: SER, SEK, RTL, SKZ, CAC?
A: answer

Drivers and Utilities

Instructions

Firmware

Discussion:- Firmware CyanogenMod 10. 10. 12. 13 -(Available)
Stock

All firmware:

Older versions

Custom
Based on stock

Third Party
  • ResurrectionRemix M Optimization FX v5.7.4post fromVeisons
  • [ROM] [6.0.1] [UNOFFICIAL] OmniROM -XDA
  • [ROM] AICP - 11.0 - MM 6.0.1_r43 | UNOFFICIAL - XDA
  • [I9105 / P | Resurrection Remix | 6.0.x] - XDA
  • [I9105 & P | [ROM] [6.0.0] Android MarshMallow Pure AOSP - XDA- Clean Android 6.0, without any modifications (In processing)
  • [I9105 & P | AICP | 5.1.1] - XDA
  • [I9105 & P | OmniROM | 4.4.2] - XDA, savagemessiahzine.com
  • [I9105 & P | AOSB Project | 4.4.2] - XDA
  • [I9105 & P | LiquidSmooth | 4.4.2] - XDA
  • [I9105 | MIUI | 4.1.2] - savagemessiahzine.com
  • [I9105 | MIUI | 4.4.4] - savagemessiahzine.com
  • [I9105 & P | AxxionKAT | 4.4.3] - XDA (I9105P), XDA (I9105)
  • [I9105 / P | Resurrection Remix | 4.4.2] - XDA (I9105P), XDA (I9105)
  • [I9105 / P | Resurrection Remix | 5.0.x] - XDA
  • [ROM] [5.0.2] [BLISSPOP] [OFFICIAL] [I9105 / I9105p] - XDA
  • [ROM] [5.0.1] OmniROM for GT-I9105 / P Initial Build - XDA
  • [ROM] [5.0.1] [alpha 1] liquidsmooth v4 [10/12/2014] - XDA
  • [ROM] [UNOFFICIAL] [4.4.4] [GT-I9105 / P] [AOSPA] ParanoidAndroid 4.6-BETA6 - XDA
  • [ROM] [OFFICIAL] [KitKat 4.4.4] [GT-I9105 / P] PAC-ROM FINAL KK RELEASE - XDA
  • [ROM] [CosmicCM-4.4.4] [V5.6] - XDA

Recovery
Stock Recovery


Custom recovery


Root

Core

AuthorGhsr possible post changes: Custom kernelnebula
This is the same core of the nebula withxdaOnly collected under the new firmware:
CM-11 M12, CM-12, Resurrection Remix 5.2.x, BLISSPOP, LiquidSmooth, OmniROM 5.0, AICP.
The version for stock 4.2.2 is also compiled, the archive name starts with "nebula-v3.20-stock-"
If the firmware does not have built-in performance tuning tools, then download it® Performance Control
Installation:
1. Install the archive through the recovery.
2. Make a reset cache (wipe cache / wipe dalvik cache).
3. Reboot.
Download: YandexDisk

AuthorGhsr possible post changes: Custom kernelMoshKernel 1.9.2
This is the same core withxdaOnly collected under the new firmware:
CM-11 M12, CM-12, Resurrection Remix 5.2.x, BLISSPOP, LiquidSmooth, OmniROM 5.0, AICP.
On these firmwares, the kernel will work.
If the firmware does not have built-in performance tuning tools, then download it® Performance Control
Installation:
1. Install the archive through the recovery.
2. Make a reset cache (wipe cache / wipe dalvik cache).
3. Reboot.
Download: YandexDisk

Other / useful


Gapps: = Gapps / 4.4 / 5.0 / 5.1 =

Post has been editedAlladin. - 08.07.18, 13:03
Reason for editing: TWRP 3.1.1-0 for I9105 / P
alexseyuh
Message#2
20.04.13, 15:45
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8148
Check in: 19.07.09
Xiaomi Mi Max 2 4/64

Reputation:-  2932  +

GT-I9105 / 9105p EFS Backup / Restore


Requires Microsoft .NET Framework 4.0 installed on your PC.
Compatible with both Windows XP and Vista 7.


What is this utility for?
This utility is needed - for backup, as well as recovery of the system EFS file, in case of loss.

What is this file - EFS?
This file contains IMEI - your smartphone. With unsuccessful flashing, this file can be erased and there will be a big bummer. And this utility helps to make a backup copy of this file.

What is necessary for the program to work:
1) Root
2) USB debugging enabled
3) The screen will not go out when the program is launched and running. (Especially at the time of the request for Root)

How to install it?
* Unzip the files from the archive, connect the smartphone in USB debugging mode (Settings / Developer options / tick the Debug via USB) and run the .bat file from the archive.
* For the program to find the efs.img file with it in the same directory, the Restore_EFS.bat file must be located

Attached Image

Attached Image



Attached fileGT-I9105_9105p EFS Backup_Restore_WIN.zip(170.64 KB)

Attached fileGT-I9105_9105p EFS Backup_Restore_LINUX.zip(73.21 KB)

K
In a hat


Post has been editedandrewww97 - 21.09.13, 16:52
powermen27
Message#3
21.04.13, 15:49
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1993
Check in: 12.12.12
Samsung Galaxy A7 (2018) SM-A750FZ

Reputation:-  83  +

Step-by-step instructions for custom firmware firmware recovery (CWM)

1. First of all, copy the file of the firmware you selected in zip format to a memory card.
2. At the same time, press and hold the volume up button + the Home button + the power button.
3. Release the buttons when the SGS2 logo appears on the screen.
4. After that, the ClockworkMod Recovery mode will be loaded.
5. Select “wipe data / factory reset†(if you install an update of the same firmware, you can skip this step).
6. Then select “Yes - delete all user data†(yes - delete all user data).
7. Select “wipe cache partition†(if you are installing the update of the same firmware, you can skip this step).
8. Then select “Yes - Wipe Cache†(yes - clear the cache).
9. go to “install zip from sdcard†(install zip from memory card).
10. Then select “choose zip from sdcard†(choose zip from memory card).
11. After that, select your zip file (in this video it was called VillainROM-2.4.2-signed.zip).
12. Select "Yes - Install your zip file" (yes - install a zip file).
13. Restart the smartphone.
14. That's it.


Be careful ! No one is responsible for your actions !!!
Do not forget that with this method the warranty flies and the counter is triggered !!!

K
In a hat


Post has been editedandrewww97 - 21.09.13, 16:53
sssemil
Message#4
19.06.13, 15:00
Old resident
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1411
Check in: 20.03.12
Oneplus one

Reputation:-  182  +

Who cares -Booting Debian on GT-i9105 nativ!

Post has been editedsssemil - 19.06.13, 16:09


--------------------
sssemil
Message#5
03.07.13, 18:12
Old resident
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1411
Check in: 20.03.12
Oneplus one

Reputation:-  182  +

So I collected cm10.1 purely for i9105 (not to be confused with i9105P)

Installation:
1. We put it through the recovery -http://d-h.st/OAMand rebuild into the system
2. Download the firmware -http://turbobit.net/inaqpih4gng6.html
gaps -http://goo.im/gapps/gapps-jb-20130301-signed.zip
3. We throw them on an external memory card (if not, then throw them on the inner ...)
4. Rebuy in recovery
5. Install the firmware first, and then the gaps (if thrown on the external one from / sdcard, if on the internal one we mount / data and put them from .data / media)
6. Factory reset and reboot)

Does not work:
1. Radio
2. Vibration
3. Not normally selected in horizontal mode (SOLUTION: Put a tick on Settings->Developer options->Disable HW overlays)


Sources:
https://github.com/sssemil/android_kernel_samsung_i9105
https://github.com/sssemil/android_vendor_samsung_i9105
https://github.com/sssemil/android_device_samsung_i9105

Updates:
#1
#2

We put update number 2!

Post has been editedsssemil - 30.10.13, 14:39


--------------------
kompressor10
Message#6
04.08.13, 20:14
*********
[offline]

Group: Banned
Messages 7133
Check in: 05.01.12

Reputation:-  1601  +

M
The curator of the topic is appointedandrewww97 .


Post has been editedcompressor10 - 04.08.13, 20:14


--------------------
andrewww97
Message#7
11.08.13, 15:02
just kidding
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 799
Check in: 08.02.11
Google nexus 5

Reputation:-  133  +

Getting root-rights through custom recovery CWM through Odin

When you receive root-rights in this way, you lose the warranty by increasing the value of the firmware counter by one.
For any actions with your device you are responsible only.

  1. Installdrivers. After installation, a mandatory reboot.
  2. Download the programOdin, unpack the archive in the root of drive C.
  3. We load custom recovery for your phone model (spoiler "Custom recovery"in the header) in * .tar format for Odin. It is also advisable to put it in the root of drive C.
  4. We load and throw this archive onto an external memory card.Attached fileUPDATE-SuperSU-v1.89.zip(1.13 MB)

  5. Turn off the device. After full shutdown (vibration), we simultaneously hold down the buttons "Volume minus" + "House" + "Nutrition". We get a screen with a warning, agree by pressing the button"Volume Plus"and connect the device to the computer via a USB cable. Check that the drivers and devices are installed correctly in the Device Manager. There should not be any devices with the wordSamsungin the name, marked with a yellow triangle. If there is - disconnect the cable, restart Windows and start from the beginning of this item.
  6. RunOdin, remove the tick from all items, except "F. Reset Time".
    Picture for item 6
    Attached Image

  7. We press the buttonPDAand select the previously loaded * .tar.
    Picture for item 7
    Attached Image

  8. Odin, the window under the inscription "ID: COM". There in blue should light up the inscription"0: [COM *]"(* - any number).
    Picture for item 8
    Attached Image

  9. PushStartand wait. When the firmware is finished, the device will not reboot (it will remain in firmware mode, where there is information at the top left). Here we hold the buttons "Volume Plus" + "House" + "Nutrition"until a green android robot appears (in other words, go to the recovery).
  10. We reach the point "install zip", then"choose zip from storage / external_sdcard"(or"choose zip from storage / sdcard1", depends on the version of recovery), then we select the archive previously copied to an external memory card"UPDATE-SuperSU-v *. **. Zip"and confirm the installation.
  11. Click on the item "reboot system now". The system will boot, the program will appear in the menu"SuperSU".
  12. Is done. Now your device with root-rights and the program that controls them.

K
in a hat


Post has been editedandrewww97 - 18.01.14, 12:37
andrewww97
Message#8
12.08.13, 09:47
just kidding
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 799
Check in: 08.02.11
Google nexus 5

Reputation:-  133  +

Rutted firmware

Many thanks to the useralexseyuhfor utilities!

Warrantypreserved, the firmware counter remainswithout changes

Instruction:
  • Download the two necessary archives containing the PDA and CSC parts in the title.
  • Unpack * .zip archives
  • Flash the resulting * .tar.md5 archives throughOdinasPDAandCSCparts (these archives have the appropriate names), leaving only the checkboxesAuto rebootandF. Reset Time

Abbreviations:
  • Ros- Root, Odex, Stock
  • RDS- Root, Deodex, Stock

Download:


Post has been editedandrewww97 - 09.05.14, 05:29
andrewww97
Message#9
14.08.13, 16:57
just kidding
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 799
Check in: 08.02.11
Google nexus 5

Reputation:-  133  +

Service firmware

Automatic full data cleaning

note:
  • What is it and why (clickable)
  • The firmware consists of three parts and a pit file.
  • All user data will be deleted, including files that are on the device's internal memory!
  • After the firmware you get a clean device (as from the store).
  • Firmware with pit fileoptional. Requiredonly in case of emergency, at damage of sections.

I9105
SF | Android 4.1.2 | I9105XXAMC2 | SER -Yandex.Disk, Google drive
SF | Android 4.2.2 | I9105XXUBND1 | SER -Yandex.Disk

I9105P
SF | Android 4.1.2 | I9105PXXAMC2 | DBT -Yandex.Disk
SF | Android 4.2.2 | I9105PXXUBNE1 | NEE -Yandex.Disk


Post has been editedandrewww97 - 07.06.14, 14:22
sssemil
Message#10
20.08.13, 15:47
Old resident
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1411
Check in: 20.03.12
Oneplus one

Reputation:-  182  +

Small update for cm10.1 i9105:

cm10.1upd-by-sssemil.zip

1. Filed from advertising hosts
2. Certificate USB OTG
3. Added a script to mount all sections of the memory card

Post has been editedsssemil - 20.08.13, 16:15


--------------------
sssemil
Message#11
26.08.13, 11:20
Old resident
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1411
Check in: 20.03.12
Oneplus one

Reputation:-  182  +

Kernel for GT-i9105

Opportunities
- Swap support
- Support init.d scripts
- Support NTFS fs
- Support Btrfs fs
- Support auto-connect when loading a memory card with ext2

Downloads
SWA-412-init.d_by-sssemil.zip

Installation
1. Make sure you have installed AMC2 and you have i9105 (not i9105P)
2. Install CWM recovery
3. Download and put the installation zip on the sdcard
4. Install and rejoice))

Post has been editedsssemil - 26.08.13, 16:35


--------------------
sssemil
Message#12
27.08.13, 08:39
Old resident
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1411
Check in: 20.03.12
Oneplus one

Reputation:-  182  +

AOKP for i9105
Installation
1. First, put it -CWM_I9105-by_sssemil (s2ve) .zipand restart to system
2. Download the firmware -aokp_i9105_unofficial_2013-08-26.zip
and gapps -http://goo.im/gapps/gapps-jb-20130301-signed.zip
3. We put on an external sdcard
4. Reboot recovery
5. Wipe data
6. Now first put aokp zip and then gapps zip
7. Reboot)

Bugs
Radio
Vibration
Dialer

Source
https://github.com/sssemil/android_kernel_samsung_i9105
https://github.com/sssemil/android_vendor_samsung_i9105
https://github.com/sssemil/android_device_samsung_i9105

Post has been editedsssemil - 27.08.13, 18:11


--------------------
Sanek24region
Message#13
29.08.13, 01:53
[D] efiance | Server © CS 1.6
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2019
Check in: 17.01.13
Meizu M6 Note 3/16/32

Reputation:-  127  +

TWRP


--------------------
And even that which cannot be, one day can also be
powermen27
Message#14
30.08.13, 14:09
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1993
Check in: 12.12.12
Samsung Galaxy A7 (2018) SM-A750FZ

Reputation:-  83  +

Instructions for replacing memory from internal to external - for 4.2.2

® FolderMount
I borrowed the instructions for transferring the games cache

Click at the top left of the list of pairs
Attached Image

Select "Application Analyzer"
Attached Image
Select the game we need to transfer the cache (test for Asphalt 8)
Attached Image
Choose what we want to transfer the cash or game and click "Create a pair"
Attached Image
We agree "Yes" to automatic selection of the folder or by handles we prescribe the path "No"
Attached Image
With automatic selection, we get such paths and click the tick in the upper right.
Attached Image
We agree to the transfer of "Yes"
Attached Image
We are waiting for 100% transfer

We fix a successful transfer by pressing the carnation on the opposite of the inscription that appears (the carnation turns green)
Attached Image
Check in the list of applications (everything is on SD and memory is free)
Attached Image
Rejoice free memory and running the game!
Attached Image

K
in a hat


Post has been editedandrewww97 - 06.01.14, 15:04
andrewww97
Message#15
08.09.13, 12:44
just kidding
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 799
Check in: 08.02.11
Google nexus 5

Reputation:-  133  +

Instructions for firmware via Odin 3.07

Recommendations:
  • It is recommended to use a laptop, or have an uninterruptible power supply, because In the event of a power outage, you can get a brick that is not restored at home.
  • It is recommended to flash through the portUSB 2.0. USB 1.0 is not suitable, USB 3.0 is sometimes a problem.
  • Use ports goingdirectly to the computer motherboard, noextension cords and USB hubs.
  • It is recommended to unpack files (Odin, firmware) in non-long ways that do not have Cyrillic.
  • After disabling Kies (if available), make sure that there are no processes in the task manager that have the name "Kies ".

Instruction:
  1. Make sure your device is charged.more than half(more is better. It is recommended to charge 100%) . Install the driver from the header, connect the device, after booting into Odin mode (" Vol- "+" Home "+" Power ", and then " Vol + ") to install the device in the system. Then we reboot.
  2. Download the firmware in the format "* .zip ", unpack. It looks like" * name * .tar / tar.md5 "and consists either of one file (in this case, all parts of the firmware - PDA, Phone, CSC - are contained in one file), or it can consist of three files, in a separate case of four (a separate file for a separate part of the firmware). In the archive with firmware may be a file " SS_DL.dll ". This file is present if the firmware was downloaded via Kies. It does not play any role when flashing through Odin.
  3. Check if Samsung Kies is turned off. We include pre-loaded and unpacked Odin.
  4. If the firmware consists of a single file, then click on the button "PDA "and select this file (if the firmware file extension" * .tar.md5 "then it may seem that the program is frozen, but it just checks the integrity of the file, you need to wait a bit). If the firmware consists of three files, then click on the button" PDA "and select the file that contains the word PDA in the title, waiting. We press the button " PHONE ", select the file containing the word Modem . And for the " CSC "- file containing CSC . It's simple. Maybe the 4th file (" * .pit "), but it is contained only in the service firmware (in this case, press the button" Re-partition ", select this file and check ifcheck mark " Re-partition ". In the official / custom firmware it is not!
  5. Check ticks. Must standonly " Auto reboot "and" F. Reset Time "(if there is a * .pit file, then the" Re-partition "checkbox should also be ticked). Other ticks should be should not!
  6. Turn off the device, go toOdin mode connect to the computer. "Box" under the inscription " ID: COM "should turn blue and display the view caption" 0: [COM *] ".
  7. Push the button "Start ". The firmware will start. Not recommended turn off the device during the firmware! We are waiting for the end, the device will reboot. After the device is fully loaded, the message "PASS!" Appears. and elapsed time. You can disconnect the device from the computer and use.

K
in a hat


Post has been editedandrewww97 - 06.01.14, 15:05
powermen27
Message#16
08.09.13, 14:46
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1993
Check in: 12.12.12
Samsung Galaxy A7 (2018) SM-A750FZ

Reputation:-  83  +

Here is the stock recovery for 4.2.2, who can come in handyAttached filerecovery.tar(6.36 MB)

K
This recovery from I9105P


Post has been editedandrewww97 - 06.01.14, 15:06
maloi4455
Message#17
10.09.13, 10:09
Old resident
******
[offline]

Group: Curators
Messages 450
Check in: 17.03.11
Honor 4C CHM-U01

Reputation:-  114  +

Provision_V5 modified firmware for I9105 based on official I9105-SER-I9105XXUBMH4 (4.2.2)

Attached Image


What's changed
  1. Deodex + busybox
  2. Support download scripts from the folder Init.d
  3. Root
  4. The processor mode is set to save power.
  5. Changed the font
  6. Played with sound
  7. Cleaned from rubbish
  8. Reduced the threshold for notifications of low level (now 2%)
  9. Replaced window animation
  10. Replaced standard sounds
  11. Transparent curtain
  12. Ziplagin when enabled
  13. Tweaks in init.d
  14. Tweaks build.prop
  15. The effect of fire on the lock screen when choosing a light effect in the settings
  16. Broken market and patch core selection during installation
  17. 19 types of batteries in the settings screen
  18. Which font to use when installing
  19. Replaced the background in the settings and other applications
  20. A pair of xbin tweaks added
  21. Added a program for fine-tuning the smartphone (not all functions of course work, but I removed the warning about the sound)[FRAMEWORK] Xposed (Rus)with moduleWanamXposed.2.0.0. Be careful with her !!!
  22. Added another effect when blocking (a zipper)
  23. Added modified Host file for ad blocking
  24. New animation on and off
  25. Removed the delay after the call
  26. Improved auto-adjust screen brightness
  27. Fix mediascaner
  28. Corrected the installation in Arome (now you do not need to do wipe data, Aroma will offer to delete user data or not)
  29. Audio Engine with Xperia Z
  30. Changed CPU mode (instead of Ondemand is now Conservative), power consumption has decreased
  31. Edited some graphics
  32. Improved video recording quality through the standard camera application

    New !!!
  33. Added internet connection speed indicator to status bar
  34. Changed even more graphics
  35. Fullscreen photo when calling
  36. The choice in the aroma will be a curtain with a girl and a curtain with animation
  37. Added byviper4android (equalizer with many settings)
  38. Now not 19 types of batteries but 34
  39. Replaced smilies in SMS
  40. Added coreVSMC (Very-Super-Mega-Cool Kernel)
  41. Added script for transferring phone memory to a flashcard in the external_sd / sdcard1 folder (needs testing)
  42. Added a script that assigns rights to applications in the app and framework folders (it will be useful to those who often replace the standard files from these folders);


Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Installation:
To start, you must have the official I9105-SER-I9105XXUBMH4 installed !!!
1. Turn off the smartphone
2.Prishiv Cwm
3. Go to Cwm
4. InstallProvision_V5as zip archive
5. Reboot
6. Enjoy B)
7.Those who do not see the flash drive are required to delete the file 11extsd2internalsd on the path system \ etc \ ini.d

A few words about configuring and using the Xplosed Installer:
1. After the first turning on of the smartphone, go to the Xplosed Installer application.
2. Tap on the item "System"
3.Up "Install / Update" and reboot
4. After the first reboot, we go back to this application but already in the "Modules"
5. Select the module Wanam and reboot
6. After the second reboot, go to the Wanam module and set up your smart as you please (the main thing is that the changes take effect must be rebooted)
That seems to be all ...

Post has been editedmaloi4455 - 06.10.15, 03:11
Reason for editing: Updated link


--------------------
powermen27
Message#18
13.09.13, 11:17
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1993
Check in: 12.12.12
Samsung Galaxy A7 (2018) SM-A750FZ

Reputation:-  83    +

Backup and Restore EFS


I am not responsible for the brick that your phone will turn into as a result of your wrong actions. This manual is written to help you keep one of the most important sections of your device.
This should be the first of the actions that you should take after rutting the phone

What is so important about EFS and why should you back it up?

EFS is the system folder in the root directory of your phone, which contains very important and basic information about the system of the device, such as MAC WiFi, MAC Bluetooth, and most importantly - IMEI (nv_data.bin).
If the EFS section is damaged or erased, your IMEI will be lost and the device will become absolutely useless and you will not be able to make and receive calls, because the operator’s network will not be able to register your phone. This can happen for a number of reasons, one of them is an attempt to flash the wrong or damaged firmware image, or some other error. Since this is a non-guaranteed case, the recovery in the SC will have to pay money and, I suspect, a lot.
Only EFS backups can prevent problems if something went wrong with the firmware or EFS partition.

The correct and most secure EFS backup method is described below. Simply copying the "/ efs" folder to an external memory card using the root file manager is not correct, since with such access it is likely that the access rights to files and folders will not be restored.

Backpack
1. Runterminal emulator
2. Enter the command and press ENTER to get the superuser rights:
su

Attached Image


3. Enter the following and press ENTER on the keyboard (the command is case-sensitive, so enter exactly as it is written)
dd if = / dev / block / mmcblk0p17 of = / storage / sdcard0 / efs.img bs = 4096

Attached Image

If everything went well, you will see something like this:
Attached Image


The file "efs.img" appears in the root of the internal memory (sdcard0) with a size of about 20 MB. Move this file to a safe place from where you can pick it up at any time.

RECOVERY
1. Make sure that the file "efs.img" is in the root of the internal memory (sdcard0).
2. Follow steps 1 and 2 of the backup instructions.
3. Enter the following and press ENTER on the keyboard (the command is case-sensitive, so enter exactly as it is written)
dd if = / storage / sdcard0 / efs.img of = / dev / block / mmcblk0p17 bs = 4096


4. Restart the machine.
K
in a hat


Post has been editedandrewww97 - 06.01.14, 15:06
alexseyuh
Message#19
14.09.13, 14:46
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8148
Check in: 19.07.09
Xiaomi Mi Max 2 4/64

Reputation:-  2932  +

Service firmware is the same stock in composition one to one :-D
Differences in the separation of parts of the firmware (for the convenience of flashing different parts, sometimes it is necessary)
And added PIT file. Based on it, One flushes the xxx.img parts of the firmware into the smart memory areas specified in it (in the pit file) (the pit is removed from the original device and is used during section meetings, which sometimes happens to regret)
And the most important difference is the only change in the stock configuration, more precisely in the cache.img the command is changed to wipe.
Instead of a wipe cache, a command was applied to the wipe data factory reset.
That is, after applying this service firmware, an automatic user data wipe occurs at the system level. That is very, very good))
That's about it. :-D
K
Added tothismessage


Post has been editedalexthjun - 11.04.14, 19:15
maloi4455
Message#20
15.09.13, 15:22
Old resident
******
[offline]

Group: Curators
Messages 450
Check in: 17.03.11
Honor 4C CHM-U01

Reputation:-  114  +

Friends released a new version of my firmwareProvision_V3
: dirol:

Post has been editedmaloi4455 - 15.09.13, 15:22


--------------------
alexseyuh
Message#21
17.09.13, 15:09
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8148
Check in: 19.07.09
Xiaomi Mi Max 2 4/64

Reputation:-  2932  +


400 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 20.05.19, 02:13