> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


917 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Fly IQ451 Vista - Firmware (OS 4.x)
byboyko
Message#1
14.04.13, 22:21
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1164
Check in: 23.09.12
Xiaomi Redmi Note 5 3/32

Reputation:-  645  +

Fly IQ451 Vista - Firmware (OS 4.x)
PictureFly IQ451 Vista, Micromax A116 Canvas HD, MyPhone A919i Dual, Mobistel Cynus T5, Wiko Cink Five, Tinno S9201

Description | Discussion � | Owners Club � | games and apps � | Modifications and decorations � | Accessories � | Firmware MOD from Bars749 & hyperion70 � | LEWA / MIUI / BaiduOS firmware � | CyanogenMod firmware � | Firmware (OS 4.x)�

Important information!
ANY ACTIONS ACCORDING TO THESE INSTRUCTIONS ARE PERFORMED AT YOUR FEAR AND RISK AND UNDER YOUR RESPONSIBILITY!
Before any actions with changing the firmware it is STRONGLY recommended to make a backup of the stock (factory) firmware.
Drivers and Utilities
Drivers
Driversdigitally signed for Win 7/10
x86andx64Fly IQ255 drivers are suitable for Fly IQ451
x86andx64Fly 451 drivers
Installing drivers in Windows 8/10
Firmware
Firmware
Official firmware
Be sure to read before flashing. This information will save your touchscreen!
Before the first firmware of any Android 4.2, you first need to flash SW15 for correct update of the touchscreen software. Otherwise, going to the SC in 99 %% of cases. No solution found yet.
After the firmware, when the inscription TPupgrade appears, in no case do not click on the screen - it threatens to kill Touchscreen. Wait 5 minutes, the message should appear in English "The update was successful, click OK", and then you can safely manage your device.
In the future, you can sew anything and in any order.
4.1.x
SW11 rusfolder(Set via Flashtools)
SW12(Install via recovery)
SW14 rusfolder(Set via Flashtools)
SW15 rusfolder mail.ru(Set via Flashtools)
4.2.x
SW5 Yandex Mail.ru(Flashtool or custom recovery)
Custom firmware
Android KK 4.4.x
Android JB 4.2.x
Firmware with non-working links
Recovered firmware
Instructions
All actions you perform at your own risk! No one except you is responsible for the "bricks"!
Nvram recovery via TWRP 3.x.x.x
Easy imei recovery
If not flashtool flashing
Recovery imei donor nvram
F.A.Q.
ATTENTION!!!
This section is required to read all!
To read>>>
Video F.A.Q. on firmware Fly IQ451
Installation Recovery
ThroughMobileuncle MTK Tools
  1. Download the required Recovery image and copy it to the root of the internal memory
  2. Launch Mobileuncle
  3. Select the Recovery item and find the Recovery image (it is usually the first in the list) and click on it.
  4. Phone will reboot into freshly installed Recovery

Thank you roxalex
Via Smart Phone Flash Tool
Scatter file for MTK6589Attached fileMT6589_Android_scatter_emmc.zip(412 bytes)

  1. Launch Smart Phone Flash Tool
  2. Install drivers for your OS version - x86 (32-bit) or x64 (64-bit).
  3. Press the Scatter-loading button and select our scatter file. We remove all the jackdaws except Recovery. Click on Recovery and select the downloaded file of the modified recovery. Press the Options button and put a check in front of USB mode. Press Options again and put a check mark in front of DA Download all / Speed ​​/ Force to High Speed.
    Next, click on the Download button and in the opened window, click Yes. The program goes into standby mode to connect the phone.
  4. We turn on the USB debugging mode in the phone settings for developers. We connect the phone to the computer so that the driver is finally installed. After installing the drivers, disconnect the phone from the computer.
  5. Turn off the phone, remove the battery from it and connect to the computer via cable. The firmware will start. At the end of the window should appear with a green circle. This means that the modified recovery was successful.
  6. We take out the cable from the computer
  7. We insert the battery into the phone, if removed it.
  8. Start the phone.

Through®Rashr - Flash Tool
Instruction:
1. Download the required Recovery image and copy it to the root of the internal memory (Recovery should be in * .img format, not * .zip)
2. Run Rashr
3. Select the item "Recovery from memory" and find the image of Recovery (you need to scroll through the list) and click on it
4. In the warning that appears, tap OK
5. And OK again to enter the freshly installed Recovery
Instructions on firmware via Smart Phone Flash Tool
Required:
1. Software:
  • Operating system: Windows XP, Vista, 7, 8
  • USB drivers for Fly IQ451
  • Smart Phone Flash Tool Loader
  • Firmware for Smart Phone Flash Tool

2. Equipment
  • Apparatus
  • Usb cable
  • Charged battery(at least 50%)

The course of action:
  1. Install drivers for your OS version - x86 (32-bit) or x64 (64-bit).
  2. Turn off the phone and remove the battery (if you can not flash the phone without a battery, insert it back and try with it).
  3. Run the Smart Phone Flash Tool (Flash_tool.exe).
  4. Find Scatter-loading and select the file MT6589_Android_scatter_emmc.txt (in the folder with the firmware).

    ������ �� ����� ������� ��������� download

    Attached Image

  5. Press the Download button and connect the phone to the computer via the USB cable.
    Attention!!Never press the "Format" button in the Smart Phone Flash Tool! As a result, you will get a brick, the firmware of the communication module will fly off, IMEI and network calibration will fly off, and the recovery process will be quite time consuming.
  6. We are waiting for the phone to be determined by the program and the firmware process will begin.
  7. When the firmware completes successfully, a green circle appears on the screen.
  8. We take out the cable from the computer
  9. We insert the battery into the phone if it was stitched without it.
  10. Start the phone.

Thanks NeoUA
FlashTool Error Comments
Error 8038 - an error occurs when flashing from cb15 to cb5 a little morelink
Open the MT6589_Android_scatter_emmc.txt file in notepad (located in the firmware that you are stitching) and rule in the NODL_FAT 0x line96b80000 at NODL_FAT 0xa6b80000

S_DLIST_BBCHIP_HW_VER_NOT_MATCHED (5033)
Flash thinks that the downloadable firmware does not fit this phone. It is necessary to turn off the check, remove the check in the menu
Options->-Baseband chip options>Check baseband chip

S_DA_EXT_RAM_ERROR (3001)
Possible connection problems, check cable, slow down port speed

S_DA_HANDSET_FAT_INFO_NOT_FOUND (3066)
Occurs with automatic formatting, you should try to set the format addresses manually.

Fail to download DA to internal SRAM of target
The flasher can not load the bootloader into the phone, the cable problem, or the unsupported processor

s_ft_da_no_response (4001)
It appears after sending the bootloader, after you clicked OK, a dead flash drive can serve as the cause.

s_da_invalid_range (3036)
Apparently with downloadable firmware, it most likely has a larger size than that specified in the loaded region, open it in the hex editor and remove the excess.

S_FT_DOWNLOAD_FAIL (4008)
download to flash fail! Please press CTRL + ALT + T to turn on debug log then reproduce again! C: BROM_DLL.log
In the process of firmware village battery ...?

S_DA_NOR_BLOCK_DATA_UNSTABLE (3030)
NOR flash beaten

S_FT_DA_NO_RESPONSE
There is no CPU / Flash information in the download agent.

Error 8200
You need to update the version of FlashTools (thanks to BAJIERA)

If the firmware program (for example, FlashTool) does not "see" the phone. Full driver installation for firmware.
Instructions for firmware throughTWRP Recovery
  1. We put the necessary firmware in the zip-archive on the SD-card.

  2. Download the phone to TWRP recovery (turn off the phone - the screen goes off - when you turn off completely - give a vibration signal, turn on - press and hold the Power and then Volume + and hold both buttons until the blue wallpaper with the word TWRP)

  3. Save the current firmware - the "Backup" item - select ALL partitions (Boot, Cache, Data, Recovery, Android Secure, System, Nvram, Uboot), to save space - Enable compression. To speed up backup - Skip MD5 generation during backup. Tap on the Storage strip - select the sdcard if not previously selected. Via Set Backup Name, you can specify a name for the backup. Swipe to the right along the "Swipe to Back Up" strip to start the process - the "Backing Up System" window appears. When saving is finished - click the arrow back 2 times to exit to the main menu.

  4. We do Wipe-s (data cleansing before rolling in new firmware). Through the menu "Wipe ->Advanced Wipe "select items: Dalvik Cache, Cache, Data, emmc (*), Android Secure, System.
    Running wipe also through swipe on the words "Swipe to ..."

  5. After wipes (make them MANDATORY!) - go to the main menu item Install - select the file with the firmware in the zip-archive, the checkbox on the "Zip file signature verification" is NOT set. Swipe to Confirm Flash. We are waiting for the firmware to finish and click Reboot - System.

========

To install the mods on the firmware, we always first save the current firmware (DO NOT LAZY!), Then use the "Advanced Wipe" menu to make wipes only Cache and Dalvik Cache and through the Install menu we also select the zip file and flash it.

(*) emmc - built-in phone flash drive, if you store something important there, then you can not do wipe.

Thank you roxalex
Instructions for firmware throughCWM Recovery
Navigate the menu using the volume buttons, select (confirm) with the power button, return to the previous menu with the back button)
  1. Download the desired firmware and dump it to the root of the memory card
  2. We go in CWM Recovery (On the phone off, hold down the volume + and on keys)
  3. Select Wipe data / Factory reset, Wipe cache partition, advanced-wipe dalvickcache (This will delete all your data in the phone’s memory)
  4. Go to Mounts and storage and do the format / system
  5. Choose install zip from sdcard ->Choose zip from sdcard (Chose zip from external sdcard)
  6. Select the archive, wait until the installation is complete
  7. Reboot system now and wait for the phone to turn on, usually after flashing the phone loads longer than usual, so do not get scared and wait patiently

Instructions for obtainingRootis right
To get Root rights, just flash SuperSU.Attached fileSuperSU-v0.98.zip(669.5 KB)
throughModifiedRecovery
Instructions for the restoration of "brick"
If for any reason you received a “brick†- as a result of unsuccessful firmware, turned off the lights during the firmware or just unsuccessful experiments, then just flashing the official firmware through the Smart Phone Flash Tool and rejoice;)
One-click recovery firmware
Quick receiptRoot- right
Program for ruttingDo not forget to read about the risks of obtaining Root rights by this program.to read>>>
IMEI Repair Instructions
Via Mobile Uncle Tools
Through SN Write tool v2.1228.0
Through the engineering menu
1- In the native diver type * # * # 3646633 # * # * - after dialing the last asterisk you will immediately get into the engineering menu
2- Under the Connectivity tab, select CDS information
3- Choose Radio Information
4- Choose Phone1 (for the first imei)
5- at the top of the command line, which starts with “AT +â€, delete +, then set + and select “AT + EGMR = 1.7," "(where in" "enter IMEI 1 sim) (should look like AT + EGMR = 1.7, "xxxxxxxxxxxxx" (xxxx is your imei)
6- click send command
7- should see the message "sent to mSend".
8-Then go back and select “Phone2â€
9-at the top of the command line, which starts with “AT +â€, delete +, then set + and select “AT + EGMR = 1.10,†"(where in" "enter IMEI 2 sim)
10-click send command, we reboot the phone
11-Dial * # 06 #, in order to check your IMEI.

thank_H0LL0W_
Setting the right of the letter "G"
Link to post
Even more detail from the next branchLink
If the melody flies from the bell
On the sd card, create media / audio / ringtones and put the songs there.
if that didn't work:
Through root explorer, go to System / media / audio / ringtones, put the desired song in the folder, set the rights rw-rr-- and set it up on the call.
Entrance to the engineering menu
There are two ways to enter the engineering menu:
  1. In your native diler, dial * # * # 3646633 # * # * - after dialing the last asterisk, you will immediately get into the engineering menu
  2. Using Mobileuncle MTK Tools. Run it and go to: Engineering menu ->Engineering menu (MTK)

Thank you roxalex

The entrance to the service is carried out as follows: hold down the volume down key and turn on the device.
Factory diagrams IQ451 Vista
Internet does not work Beeline
List of applications -can/can'tdelete.
EngineerMode instructions up to 172, 180
EngineerMode to 172,180 - thanksbars749
1) parse through jbart I personally use it, EngineerMode.apk it should be deodex
2) follow the path EngineerMode.apk.bzproject \ decompiled \ EngineerMode.apk \ smali \ com \ mediatek \ engineermode \ audio \ AudioModeSetting.smali
3) open in Notepad ++ AudioModeSetting.smali \ we search through the search, select 0xa0 is the stock value, it is repeated twice, that is, we enter 0xa0 in the search,
correcting the value 180 will be 0xb4, the value 172 will be 0xac, the first value will be almost at the beginning AudioModeSetting.smali, then again we will enter 0xa0 into the search and enter the value that
entered for the first time, save.
4) go along the path jBART_MTK \ EngineerMode.apk.bzproject \ decompiled \ EngineerMode.apk \ res \ values ​​\ strings.xml
open in Notepad ++ and in the search we drive in the value of 160 stock (I take the value of stock, as it is assumed that you are upgrading the stock EngineerMode.apk) and write the value that
inscribed in AudioModeSetting.smali, 160 will be repeated three times
<string name = "Audio_MaxVol_Text">Max Vol. 0 ~ 160</ string>
<string name = "Audio_MaxVol_Text_headset">Max Headset Vol. 0 ~ 160</ string>
<string name = "Audio_MaxVol_Text_speaker">Max Speaker Vol. 0 ~ 160</ string>
will go one after another
5) if there is an EngineerMode.apk transferred, go along the path jBART_MTK \ EngineerMode.apk.bzproject \ decompiled \ EngineerMode.apk \ res \ values-en \ strings.xml and also enter our values ​​assigned
in AudioModeSetting.smali tobish value 160 will be 0xa0, value 180 will be 0xb4, value 172 will be 0xac
6) the most important thing we save and collect, we drop it into the system \ app \ folder and we put the permissions with the letter of the city. We reboot and enjoy our values ​​in EngineerMode.
miscellanea
Flash enhancement
Improving color reproduction
Recovery
What it is?
Custom Recovery is a utility that is required for:
- Create a full backup of the OS (firmware) of your phone.
- Firmware unofficial mods, custom firmware.
Also, with the help of recovery, you can do a full reset, format the device memory sections and a USB flash drive, and also make partitions on a Lunix flash drive.
There are several types of castes. recovery: CWM Recovery (ClockWorkMod recovery), TWRP, etc. The most common is CWM (it is simpler and clearer than anyone else)
Moving through items of custom recovery is done:
"Volume +" - item up
"Volume -" - item down
"CL. ON." - item selection
CWM
TWRP
Kernels
Patches
Modems
Memory remapping
Firmware design template
[CENTER] [size = 5] Here we indicate the name of your firmware. [/ Size] [/ CENTER]
[CENTER] [color = "# 000000"] [b] [size = 3] Download: [/ size] [/ b] [/ color] Here we indicate the link to download the firmware [/ CENTER]
[SPOILER = [color = red] Information [/ color]] You can write a few words about the firmware. [/ SPOILER]
[SPOILER = [color = "# 000000"] Features of the firmware [/ color]] Here we indicate the features of the firmware. [/ SPOILER]
[SPOILER = [color = "# 000000"] Changes [/ color]] We write here what you did on the firmware. [/ SPOILER]
[SPOILER = [color = red] Minuses [/ color]] Here we indicate the minuses and flaws, if any. [/ SPOILER]
[SPOILER = [color = "# 000000"] Screenshots [/ color]] Each firmware must have screenshots for the user to see what he puts. [/ SPOILER]
[SPOILER = [color = purple] I express my gratitude [/ color]] Here we indicate the people who helped you with something. [/ SPOILER]
Battery recovery
Survey Screenshots
04.12.2016
Attached Image
12.12.2015
Attached Image
Attached Image
15.03.2014
Attached Image

K
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a button"a complaint"under the messages to which you want to add links.


Post has been editedklich007 - 01.09.17, 10:41
Reason for editing: TWRP 3.1.1
alejandr13o
Message#2
14.04.13, 22:36
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 299
Check in: 08.06.12
Samsung Galaxy S 2 GT-I9100

Reputation:-  52  +

K
F.A.Q.

FAQ
Fly iq451 Vista firmware FAQ. Read carefully!
  1. What is the need for flashing?
    Android is constantly evolving, and to use the new features, you must constantly monitor the new versions of your operating system and, after their release, update it. You may also want to get some features that are not available in the official firmware version of your device, or change some standard system components (interface replacement, removal and addition of applications installed on the system by default, etc.) you can flash the device modified unofficial firmware. Summarizing, we can say that a flashing is needed to obtain new additional features and eliminate errors of old versions. You can find the list of the most up-to-date firmware for your device in the section corresponding to your model.
  2. What is Root access and what is it for?
    Root access is access to the operating system of your smartphone with administrator rights, which can do everything. That is, without this access, you use your phone as a regular user and can not change the system resources and important settings of the operating system. In most cases, it is not needed, as many have enough available functionality, but sometimes there is a need to do something (let's say to flash the phone with unofficial firmware, install a program that needs root access, make sure that applications are installed on the SD card) You can follow the not very complicated instructions and get root access in almost 5 clicks (please note that getting root is different in each model and in some cases it is impossible to get full root access, so read the topic tatyu specifically about your model!). Most often it is needed here when:
    but. Change the appearance of the OS (status bar, standard icons, a picture when the device is loaded, etc.)
    b. Creating Recovery (a special subroutine that allows you to make the device firmware much more convenient and faster, also allows you to backup (save the current state) of your files to the SD card and much more, for more details, see "What is Recovery")
    at. Access to the terminal (we did not forget that we have a linux system? If you don’t know what linux is and what a terminal (console) is, then this item will not be of particular interest to you)
    Removing the standard software from the phone (let's say you don’t need a facebook client or google maps, you can delete it with superuser rights)
    e. Installing and running software that requires high privileges (for example, programs for transferring all types of files via bluetooth, tether applications (a program for distributing the Internet from your phone to other devices, working via wi-fi and creating an access point from the device)
    e. Installing programs not in the phone’s memory, but on an SD card (this function, though not completely, but already implemented in Android 2.2 and higher)
    e. Flashing the device with the so-called custom firmware (firmware that has been modified by third-party developers not related to Fly)
    ё. There are many other things that the ordinary user doesn’t need as such. Well, unusual users already know everything themselves.
  3. What is Recovery and what is it for?
    Recovery is a separate program that allows you to restore the phone, which can not boot to working condition. It is called when the system is loaded with a special key combination (usually the volume up + the on / off / lock button). Standard Recovery unfortunately does not allow flashing the phone with “custom†firmware, and also does not have the ability to make backups (current state for subsequent recovery) of programs, system and other elements.
  4. What needs to be done before starting the firmware or getting root-rights for your device?
    Starting the process of flashing your phone, first of all, you need to remember that this will destroy all the information stored in it. Therefore, we strongly advise everyone to backup all important files: contacts, photos, and so on.
    Backup is performed on a memory card, and it is configured in the menu item “Privacy†of the phone, then “Data backupâ€. After making a backup and reflashing the phone, when you first start it, you will be asked to restore all the files and settings.
    Also remember that all actions related to flashing are carried out with the phone at your own peril and risk. In addition, in the case of flashing the phone not in the SC, it is removed from the guarantee. However, as a rule, there are no problems. In the most extreme case, you can always make a "rollback" to the previous firmware and take the phone to warranty repair.
    Before starting the firmware, make sure that the drivers and the latest version of the Smart Phone Flash Tool are installed on the computer.
  5. How to make a wipe and what is it?
    Wipe is a reset to the factory settings (deleting user settings). Press the volume up button and the on / off / lock button, hold until the menu appears, use the volume buttons to select wipe data / factory reset in the menu and press the on / off / lock button (the confirmation item is also selected), then wipe cache partition and press on / off / lock, upon completion of all select reboot system now ...
  6. How to start menu recovery and management.
    We hold down the volume up button and the on / off / lock button, hold until the menu appears.
    Navigate the menu using the volume buttons, select (confirm) with the power button, return to the previous menu with the back button)
  7. How to find out the firmware version?
    To do this, go to Settings ->>>About the phone and look at the "Build number" point (For example, SW_5_FLY_IQ451_V4_2)
  8. What is needed for firmware?
    a) A computer with any operating system
    b) Telephone and usb cable,
    c) Drivers and software for flashing,
    d) The firmware itself,
    e) Instruction. (All instructions are given in the topic header)
    e) Charged battery (minimum 50%, but preferably fully)
  9. Where to get the firmware?
    In the topic header.
  10. Does self-flashing deprive the warranty?
    No, unless the service can prove that your actions have put the device in a non-working state, this also applies to obtaining root rights ...
    Usually, Fly does not remove the device from the guarantee if obtaining root rights and flashing did not lead to phone failure.
  11. How to get root rights?
    To get Root rights, it is enough to flash SuperSU through modified Recovery. Modified recovery can be found in the header and the instructions for installing Root are right.
  12. Through which program are custom and official firmware installed?
    Through Recovery custom, through the Smart Phone Flash Tool - official.
  13. What should I do if the phone is scorched?
    If for any reason you received a “brick†- as a result of unsuccessful firmware, turned off the lights during the firmware or just unsuccessful experiments, then just flashing the official firmware through the Smart Phone Flash Tool and rejoice.
    If suddenly it did not help, then contact the service center!
  14. What to do if the ring tone flies?
    On the sd card, create media / audio / ringtones and put the songs there.
    If that didn't work:
    Through root explorer, go to System / media / audio / ringtones, put the desired song in the folder, set the rights rw-rr-- and set it up on the call.
    On SW5 JB 4.2.1 firmware, this bug has been fixed.
  15. How to enter the engineering menu?
    There are two ways to enter the engineering menu:
    In your native diler, dial * # * # 3646633 # * # * - after dialing the last asterisk, you will immediately get into the engineering menu
    Using Mobileuncle MTK Tools. Run it and go to: Engineering menu ->Engineering menu (MTK)
  16. How to increase the speaker volume in any Fly iq451 Vista firmware?
    - Enter the engineering menu and set the settings in accordance with the data given below.
    Call volume levels are set in Audio - LoudSpeaker - Ring
    Max Vol = 150 (it is the same for the whole section)
    Levels: 0 90 110 120 130 140 160 (more begins to wheeze).

    Multimedia volume levels are set in Audio - LoudSpeaker - Media
    Max Vol = 150 (it is the same for the whole section)
    Levels: 0 80 110 130 160 180 200 (more begins to wheeze).
  17. Can I flash the device if it is not 100% charged?
    Yes, it is possible, but it is desirable to have at least 50%, it should be enough for the flashing time, since charging does not take place at the time of firmware recording
  18. What is the latest official firmware at the moment?
    - SW5 JB 4.2.1
  19. What is the core of the firmware?
    The kernel is part of the operating system, and it is not only Android, but also other operating systems: Windows, iOS, MacOS, and others.
    And the Android kernel is practically the most important part of the operating system, which is responsible for the interaction between all the hardware and the software part of the system. The kernel consists of a set of drivers of all the hardware and memory management systems, network, security, and other basic functions of the operating system.
  20. Does the FLY IQ451 have a FOTA firmware update (Firmware Over The Air)?
    Yes, this function is available starting from SW5 software version as a separate icon in the application menu.
  21. Why doesn't the device receive updates “over the air†(FOTA)?
    For updates over the air, you need to connect via WiFi to the Internet. Next you need to check for available updates in Settings ->Phone information ->Software Update. If there are no available updates, then you have a fresh version of the firmware, there are no updates available for your region.
  22. What is CWM?
    CWM is a multifunctional program that allows you to perform most of the system manipulations with the root phone.
    In fact, this is a convenient interface for working with CWM recovery from under a busy system.

    CWM features>Clockworkmod>Modified Recovery (Recovery):
    Installing any modified-standard-ported firmware.
    Installing any fix patch patches.
    - Enable USB-MS mode (to transfer data to SD from under the mode)
    -Console
    -Create BackUp of the entire system + programs.
    - Recovery of data from the previously created BackUp "a
    -Wipe - data / factory reset, cache, SD, SD: ext partitions, battery stats, rotate setting
    - Layout of the SD card on linux sections. (ext, ext2, ext3, ext4 as well as SWAP!)
  23. I have flashed the device, but it does not load or it hangs on the boot screen, what should I do?
    Basically, before flashing the device to a new version, you need to use system cleaning from the old firmware version called wipe, it clears all user data and system files. Firmware developers always warn you what wipe to do before flashing the device
    common wipe
    - wipe data / factory reset - This is the formatting of the internal partition, if after that the firmware is not installed, then your device will get into the bootloop
    - wipe cache partition - This is the partition cache formatting.
    If you did not perform the necessary system cleaning under the wipe tool before the firmware, then it is possible that your device will malfunction or not load at all. If you nevertheless made the necessary system cleanups, check the integrity of the firmware file using MD5 amounts (Romodels mainly spread it for reliability) and the size of the file you downloaded, you may not have completed it, check the firmware version. any additional manipulation in the recovery mode, look at the opinions of other users who tried to install this firmware, there may have been problems on certain revisions of the devices or in general for everyone, if everything is ok pop Put on again to reset the firmware to view the installation process, it must be completed stitching Install from sd card completed, if issued any error it is possible that the problem lies in the very firmware and installing it is not guaranteed on your machine or revision. Personally, I recommend that you have one version of the firmware (which is installed correctly) on the memory card for restoring the device or unsuccessful firmware, the firmware will come in handy if any is 100% installed.
  24. How to remove pre-installed programs?
    Root is required for this purpose.
    This can be done using the program Root Explorer
    Open the program
    Go to / system / app
    In the upper right corner we make a r / w button, after which it will be possible to change / delete system files.
    Remove unnecessary software
  25. When working with FlashTools, you need a special cable or is there enough usb which is included?
    Any usb cable is suitable, for example, supplied with the phone.
  26. Can I immediately flash on sw 5 if I have firmware version 12?
    Upgrade to sw5 only with sw15 firmware, because In the firmware sw5 there is a bug with TPUpgrade, as a result, the touch may stop working, in SW15 there is no such bug.
  27. How to take a screen shot (screenshot)?
    To do this, simultaneously hold down the screen lock and volume down keys.
  28. How to set the right letter "G"?
    This means that you need to set permissions for a file of the form rw-r - r-- in any convenient file manager.
    screenshots
    Attached Image
    Attached Image

  29. How to enable the developer menu (to enable USB debugging) on ​​some JB 4.2.1, for example SW5?
    To do this, you must repeatedly click on the build version in the settings menu "About phone". The menu item will appear in the main phone settings menu.
  30. How in SW5 firmware to pull the curtain immediately with the switches?
    It is necessary to pull it with two fingers. Additional options can be configured by downloading and installing the application from the forum.Gravitybox.
  31. What are gapps?
    Gapps = Gapps = Google Apps - services provided by Google include: Gmail, Google Calendar, Google Talk, Google Docs and Google Sites.
    In general, these are standard Android applications that are available in most assemblies of this OS.
    If in your version of Android, these same gapps are “cut out†(for example, miui, cyan, etc.), they can be downloaded and installed separately, including from the header of this topic.
    It can also help solve problems in these applications on some ported firmware.
  32. How to reduce the screen on time after the call (Delay proximity sensor)
    1st method.
    Add line to build.prop
    mot.proximity.delay = 0
    0 is the screen on delay time.
    2nd method
    Install XBlast Tools (install from Xposed Installer - as well as gravity box)
    After open, select build.prop tweaks. / Delay of proximity sensor - select 0.

thankKatsoupedit byopp6, byboyko
List of applications -can/can'tdelete.
It is possible (without consequences)

apkWiFiManager.apk (WIFI NETWORK MANAGER)
ES_filemanager.apk (FILE MANAGER)
FMRadio.apk (RADIO)
LiveWallpapersPicker.apk (LIVE WALLPAPERS)
MSN.apk (PROGRAM FOR COMMUNICATION)
PinyinIME.apk (CHINESE KEYBOARD)
Protips.apk (ASSISTANT ANDROID ON THE WORKING DESK)
RenRenAccountService.apk (CHINESE APP)
Street.apk (VIEW STREETS - ANDROID SYSTEM APP)
Term.apk (TERMINAL EMULATOR)
VolumeControl.apk (CHINESE PROGRAM TO CHANGE VOLUME)
YGPS.apk (CHINESE APP FOR SETTING GPS)


DO NOTORNOT RECOMMENDED

AccountAndSyncSettings.apk (ANDROID SYSTEM APPLICATION)
AcwfDialog.apk (ANDROID SYSTEM APP)
ApplicationsProvider.apk (ANDROID SYSTEM APP)

Bluetooth.apk (APPLICATION MANAGEMENT BLUE-SYSTEM ANDROID APP)
Browser.apk (ANDROID STANDARD BROWSER-SYSTEM APPLICATION)
Calculator.apk (ANDROID CALCULATOR-SYSTEM APPLICATION)
Calendar.apk (ANDROID SYSTEM APPLICATION)
CalendarProvider.apk (ANDROID SYSTEM APP)
CertInstaller.apk (ANDROID SYSTEM APP)
Contacts.apk (CONTACT-ANDROID SYSTEM APPLICATION)
ContactsProvider.apk (CONTACT SETTINGS-ANDROID SYSTEM APP)
DataDialog.apk (ANDROID SYSTEM APP)
DefaultContainerService.apk (ANDROID SYSTEM APPLICATION)
DeskClock.apk (ANDROID SYSTEM APPLICATION)
DownloadProvider.apk (ANDROID SYSTEM APP)
DrmProvider.apk (ANDROID SYSTEM APP)

Email.apk (ANNEX WRITING ANDROID LETTER-SYSTEM APPLICATION)
EngineerMode.apk (ANDROID SYSTEM APP)
Gallery3D.apk (ANDROID GALLERY-SYSTEM APPLICATION)

GenieWidget.apk (ANDROID NEWS AND WEATHER SYSTEM APP)
Gmail.apk (MAIL APPENDIX FROM A GOGL SYSTEM ANDROID APP)

GoogleBackupTransport.apk (ANDROID SYSTEM APPLICATION)
GoogleCalendarSyncAdapter.apk (ANDROID SYSTEM APPLICATION)
GoogleContactsSyncAdapter.apk (ANDROID SYSTEM APPLICATION)
GoogleFeedback.apk (ANDROID SYSTEM APP)
GooglePartnerSetup.apk (ANDROID SYSTEM APPLICATION)
GoogleServicesFramework.apk (ANDROID SYSTEM APPLICATION)
googlevoice.apk (GOOGLE VOICE-SYSTEM APP ANDROID)
HTMLViewer.apk (ANDROID SYSTEM APP)
kickback.apk (ANDROID SYSTEM APPLICATION)
Launcher2.apk (STANDARD DESKTOP-DELETE ONLY IF A REPLACEMENT IS INSTALLED)
LatinImeTutorial.apk (STANDARD KEYBOARD-DICTIONARY-SYSTEM APPLICATION ANDROID)
LatinIME.apk (STANDARD KEYPAD - DELETE ONLY IF A REPLACEMENT IS INSTALLED)

LiveWallpapers.apk (LIFE WALLPAPER-SYSTEM APPLICATION ANDROID CATALOG)
MagicSmokeWallpapers.apk (ANDROID SYSTEM APPLICATION)
Maps.apk (GOUGH MAPS-SYSTEM APP ANDROID)

MarketUpdater.apk (ANDROID SYSTEM APP)
MediaProvider.apk (ANDROID SYSTEM APP)
MediaUploader.apk (ANDROID SYSTEM APP)
Mms.apk (ANDROID SYSTEM APPLICATION)
MtkBt.apk (ANDROID SYSTEM APP)
Music.apk (ANDROID PLAYER-SYSTEM APP)
NetworkLocation.apk (ANDROID SYSTEM APP)
OneTimeInitializer.apk (ANDROID SYSTEM APPLICATION)
PackageInstaller.apk (ANDROID SYSTEM APP)
Phone.apk (ANDROID SYSTEM APPLICATION)
PicoTts.apk (ANDROID SYSTEM APP)
Provision.apk (ANDROID SYSTEM APPLICATION)
QuickSearchBox.apk (ANDROID SYSTEM APP)
Settings.apk (SETTINGS-SYSTEM APPLICATION ANDROID)
SetupWizard.apk (ANDROID SYSTEM SETTING APP)
SettingsProvider.apk (ANDROID SYSTEM APP)
soundback.apk (ANDROID SYSTEM APPLICATION)
SoundRecorder.apk (ANDROID DICTOPHONE SYSTEM APP)
Stk1.apk (ANDROID SYSTEM APPLICATION)
Stk2.apk (ANDROID SYSTEM APPLICATION)

Talk.apk (ANDROID VOICE CHAT VOICE CHAT)
talkback.apk (ANDROID VOICE RECOGNITION SYSTEM)

TelephonyProvider.apk (ANDROID SYSTEM APP)
TtsService.apk (ANDROID SYSTEM APP)
Vending.apk (ANDROID MARKET-SYSTEM APPLICATION)
UserDictionaryProvider.apk (ANDROID SYSTEM APPLICATION)
VisualizationWallpapers.apk (ANDROID SYSTEM APP)
VoiceSearch.apk (VOICE CONTROL-SYSTEM APP ANDROID)
VpnServices.apk (ANDROID SYSTEM APPLICATION)


thankhyperion70!
List of applications -can/can'tdeletefor MIUI firmware
If the firmware program (for example, FlashTool) does not "see" the phone. Full driver installation for firmware.
This usually happens when the preloader driver does not install. It happens quite often, the following instructions should help to install all the software on the computer.
K
Attention! Before executing it, make sure that you have already downloaded and installed the drivers for your version of Windows (x86 / x64), if you have Windows 8, the installation has disabled the mandatory digital signature of the drivers (there is an instruction in the header), as well as off now, but FlashTool is still indifferent to your phone.

To fully install the driver you need:
  1. Open the device manager on the PC.
  2. Turn on USB debugging in the smartphone menu.
  3. Connect the cable ON the phone.
  4. In the device manager, double click on the displayed device
    Attached Image

  5. Go to the Driver tab and click Update.
    Attached Image

  6. In the window that opens, select the search on the computer
    Attached Image

  7. Specify the folder where previously installed the downloaded drivers
    Attached Image

  8. The installation of the driver will start, such a window may come out, choose to install the driver anyway
    Attached Image

    We go further.
  9. Again, open the device manager on the PC.
  10. Turn off the phone!
  11. Connect cable OFF phone.
  12. In the Device Manager FAST (because it disappears quickly), double click on the displayed device. Did not make it? Disconnect the cable and reconnect.
    Attached Image

  13. Go to the Driver tab and click Update.
    Attached Image

  14. In the window that opens, select the search on the computer
    Attached Image

  15. Specify the folder where previously installed the downloaded drivers
    Attached Image

  16. The installation of the driver will start, such a window may come out, choose to install the driver anyway
    Attached Image


As a result, after installing all the drivers and connecting the switched off device to the computer, the device manager should ON FOR SEVERAL SECONDS such a device should be displayed (the port number may differ)
Attached Image

Now open the flash unit, do everything according to the instructions from the header, press the Download button, now connect the switched off phone (without batteries) to the USB port that was used when installing the driver. The device is determined, the firmware will start.
p.s. It is recommended to use drivers from IQ255 instead of native ones.


Post has been editedbyboyko - 01.03.14, 23:06
Reason for editing: Updated
Dymon
Message#3
14.04.13, 23:49
*********
[offline]

Group: Honorary Gameday
Messages 8235
Check in: 17.01.10

Reputation:-  1633  +

M
Subject goes to subsectionFlywith all the edits in the directories.


--------------------
No harp - get a tambourine!
Wanting to rain, do not forget that you have to walk through the puddles.

Samsung Galaxy S7 + Huawei MediaPad M5 10 Pro
Winner of the 5th Prizesavagemessiahzine.comin the nomination "Newcomer 2010 (WM, WinCE)>
alejandr13o
Message#4
14.04.13, 23:55
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 299
Check in: 08.06.12
Samsung Galaxy S 2 GT-I9100

Reputation:-  52    +

For Titanium, you do not need so much memory ...: blink: there are only programs of the same ..
generally so.
Here is a link to the titanium (though this is old .. who has a newer lay out)exile
Titanium backup full tops (crack).
In the archive itself prog and unlock. Put a program of protmo unlock. Run the unlock and in the lower right corner click the small square .. All unlock is ready you can remove it. We use full titanium.

How to make a backup.
Launch Titanium, wait while he collects info) open the menu, press the processing and the tool for working with backup opens. There, the second item BACKUP COPY choose the third subparagraph to make a river. all ... dark data (there it’s completely if you decrypt, then you’ll make the pk of all system and user data ** Just don’t be mistaken exactly the third subparagraph in the second and the first only for the system and third-party separately, and in the third subparagraph all together ...
In general, press the start and click to start processing the copying started wait ... all copies are stored in the root of the card in the titanium backup folder or just backup I do not remember .. Drop the folder on the computer you will forget and format the card ....
Then after the body has fotmatnet and flush the downloaded titanium back onto the memory card through the market, download the expert file, install the titanium through it and restore the backup ...


--------------------
You bring harm, if you praise, but even more harm, if you blame something in which you know little.
Black_qwerty1
Message#5
15.04.13, 02:25
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1202
Check in: 13.03.13
Asus ZenFone Go ZC451TG

Reputation:-  95  +

put sw14 works faster than bugs until I found


--------------------
Asus ZenFone GO ZC451TG
NEXXXIUM
Message#6
15.04.13, 04:10
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1401
Check in: 01.12.08

Reputation:-  109  +

put sw14 works faster than bugs until I found

comparative. benchmark tests have?


--------------------
Signature is not valid ....
Black_qwerty1
Message#7
15.04.13, 06:19
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1202
Check in: 13.03.13
Asus ZenFone Go ZC451TG

Reputation:-  95  +

NEXXXIUM @ 04/15/2013, 07:10*
comparative. benchmark tests have?

antutu is now showing 12409 on sw11 was 11200 ~


--------------------
Asus ZenFone GO ZC451TG
Shultzok
Message#8
15.04.13, 07:49
a guest
*
[offline]

Group: Users
Messages 8
Check in: 05.05.10
Fly Vista IQ451

Reputation:-  0  +

Last night I changed from 11 to 14 - the problem with the market was solved !!! I did not notice any external changes in the interface.
ustas966
Message#9
15.04.13, 10:15
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 547
Check in: 21.04.09
Huawei Mate 8 NXT-AL10

Reputation:-  30  +

Yesterday I installed 14 firmware. before that there was a Hindu ... all the same, the Hindu smoother and faster worked subjectively .. plus there is a chic Sonivian player and of course its appearance of the shell .. but for the time being I remain on the 14th since the Hindu showed problems with compatibility with some 3G bands. In any case, in the suburbs ..
porthos
Message#10
15.04.13, 11:28
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 57
Check in: 26.02.11

Reputation:-  5  +

I installed the firmware SW14, I did not want to install it over 12, I completely reloaded it. It works stably.
slava fly
Message#11
15.04.13, 12:24
a guest
*
[offline]

Group: Users
Messages 8
Check in: 06.04.13

Reputation:-  0  +

Who put the 14 firmware, please see if the melody of the call flies when the device is on / off. : thank_you:


--------------------
Fly IQ451 Vista Black
porthos
Message#12
15.04.13, 13:02
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 57
Check in: 26.02.11

Reputation:-  5  +

Slava fly @ 04/15/2013, 15:24*
Who put the 14 firmware, please see if the melody of the call flies when the device is on / off.

Flies
Maks477
Message#13
15.04.13, 13:14
Novice
***
[offline]

Group: Active users
Messages 39
Check in: 21.03.13

Reputation:-  1  +

antutu is now showing 12409 on sw11 was 11200 ~

I have on the SW11 shows 12049
Black_qwerty1
Message#14
15.04.13, 14:18
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1202
Check in: 13.03.13
Asus ZenFone Go ZC451TG

Reputation:-  95  +

Slava fly @ 04/15/2013, 15:24*
Who put the 14 firmware, please see if the melody of the call flies when the device is on / off

trythisit worked for me


--------------------
Asus ZenFone GO ZC451TG
ustas966
Message#15
15.04.13, 18:52
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 547
Check in: 21.04.09
Huawei Mate 8 NXT-AL10

Reputation:-  30  +

After the 6th point ... SILENCE.

In the sense of not happening firmware?
Fuks
Message#16
15.04.13, 18:53
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 03.04.13
Xiaomi Redmi 4 Prime

Reputation:-  0  +

Quote (Fuuks @ 15.4.2013, 14:29) *
After the 6th point ... SILENCE.

In the sense of not happening firmware?

Exactly. : yes2:
ustas966
Message#17
15.04.13, 19:00
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 547
Check in: 21.04.09
Huawei Mate 8 NXT-AL10

Reputation:-  30  +

trythisit worked for me

This method is as old as ....
even on the first androids described it. I thought everyone knew him ...
Is it that the new generation of androids has grown up? who do not know what is android version 1.6? Well this is how old I am? I apologize for the top ...

Posted 04/15/2013 at 7:00 pm:

Fuuks @ 15.4.2013, 19:53*
Exactly. : yes2:

It means that the ADB drivers are not installed. It is necessary when the phone is connected to put the battery and wait until some firewood is installed. Then press the "stop" on the flash tule. turn off the phone. pull out the battery. press downloud again and connect the phone without battery
Black_qwerty1
Message#18
15.04.13, 19:03
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1202
Check in: 13.03.13
Asus ZenFone Go ZC451TG

Reputation:-  95  +

This method is as old as ....
even on the first androids described it. I thought everyone knew him ...
Is it that the new generation of androids has grown up? who do not know what is android version 1.6? Well this is how old I am? I apologize for the top ...

but for some reason, no one had thought of this method on the forum and continued to ask a question about it


--------------------
Asus ZenFone GO ZC451TG
ustas966
Message#19
15.04.13, 19:10
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 547
Check in: 21.04.09
Huawei Mate 8 NXT-AL10

Reputation:-  30  +

but for some reason, no one had thought of this method on the forum and continued to ask a question about it

no idea. I just didn’t pay attention ... on most devices it’s enough to create a media folder with audio folders inside it inside ringtones, notifications, and so on, and the melodies are already there. Even the root is not needed .. I do not know the truth .. I did not try

Post has been editedustas966 - 15.04.13, 19:12
oleg368123
Message#20
15.04.13, 20:02
a guest
*
[offline]

Group: Users
Messages 4
Check in: 23.03.13

Reputation:-  0  +

Tell me if you have problems with recording HD 1920 * 1080 video, with gps, and 3g per mts
Shultzok
Message#21
15.04.13, 20:52
a guest
*
[offline]

Group: Users
Messages 8
Check in: 05.05.10
Fly Vista IQ451

Reputation:-  0  +

Tell me if the problems with recording HD 1920 * 1080 video are solved, with gps, and 3g per mts

Problems with recording 1080P not noticed. The fact that when an incoming call stops recording - yes, that is.
With gps, I also did not notice problems on both versions of sw11 and sw14.
At the moment, I'm sitting with the 14th version already a day - everything works.
About 3g on mts I will not say - I use a megaphone on both sims - it works.
Fly
 

917 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19 20:02