Lechyff @ 11.12.18, 22:01
Tell me, in which version there are radar, as on the second screen? I have only settings and a map.
Good day!
Now checked your words. The latest version of PM - AMSATDROID FREE 1.0.14 is installed.
Maybe in the header, the instruction manual with the program is incomprehensible ... I will explain more:
1. Install the program (give it permission to access GPS) and run.
2. In the main screen of the program (first screenshot), click on the menu (three vertical points on the right on the main screen) and select SET Home Location.
3. There are three options here:
- from GPS - determine the coordinates via GPS;
- from Network - determine the coordinates via the network;
- ENTER COORDINATES - Enter coordinates manually.
3.1. If you manually enter the coordinate input, it will be possible to enter the latitude / longitude or the radio amateur QTH locator (Iaru Locator).
4. After the coordinates (home or observation places) are indicated, return to the menu (three vertical points on the right above) and select the Update KEPS item in order to download topical Kepler data.
5. The program will propose several sources to update the data. If you are used to working on a computer with ORBITRON, select the desired item where Celestrak.com is specified.
5.1. Here are also possible a number of options:
- AMATEUR - data on amateur satellites (ISS in this group with the name ISS (ZARYA));
- Cubesat - data on the satellites of the Cubesat group;
- Weather - data on weather satellites (mainly NOAA);
- Resources - data on service satellites;
- New Launches - data on recently launched satellites.
6. After you select the desired satellite group to update their Kepler data, you must select the desired satellite. This is done by pressing the satellite name in the Satellite column.
7. Next, choose for what period of time the program must calculate the passages of the desired satellite. This can be done in the Calculate Passes for the Next column.
7.1. Again a number of options:
- Next Pass Only - show the nearest passages;
- 6 hours - calculate the passages for 6 hours forward;
- 12 hours - to calculate the passages at 12 o'clock forward;
- 24 hours - calculate the passages for 24 hours ahead;
8. If you need to calculate the passage (s) of the satellite not from the current time, then there is a Change Start Time button.
In this menu, you must set the time from which the program will calculate the passage (s).
9. The required settings are completed, press the Calculate Pass button.
10. Below this button, the program will notify you about what satellite for which coordinates is for what period and from what time the calculation was performed.
11. Even below will be data on calculated passages.
12. If you click on this pass data, the screen will open (second screenshot) with various data about the passage, whose data you have pressed.
13. If it is on the main screen to make a swipe right-left in the settings area, the screen will open with the map of the land, the current position of the selected satellite on it and the path trajectories (third screenshot).
It seems to be chewed on nowhere ...