[X]Assistant

[Naghual80]

DiscussionEXEQ SET
Game consoleJXD S5300 / EXEQ SET / Turbo Games NEW.
Description |Discussion| Firmware

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Initially, the device is manufactured by the Chinese brand JXD and is calledJXD S5300.
However, in the territory of the Russian Federation this device is known under other brands and is sold under the names:EXEQ SETandTurbo Games NEW.

JXD S5300 Specifications

CPU: Sunplus GPL83000 1GHz (Cortex-A8, ARM + DSP + GPU)
Frequency: up to 1.0GHz (floating)
Graphics coprocessor: PowerVR SGX531
RAM: 512 MB DDR3
Internal memory: 4 GB (500MB for installing applications and 2GB as an additional partition)

Screen: 5 "800x480
Sensor: Capacitive 5-point
Material: Plastic (very easily soiled and easily scratched)

WiFi: b / g / n802.11 (RTL8188)

Camera: Front 0.3 Mp
Sensors: 3-coordinate G-Sensor.

Operating system:
Android 4.1.1 - stock.

Connectors(up):
DC-IN (power connector) 5V
Mini USB 2.0
Stereo headphone output (standard 3.5mm jack)
Built-in Microphone
Connectors(down below):
Micro SD (up to 16GB TF card)
The RESET button (in fact, off. It is located in the depth of the hole. Push with the unfolded clip without effort.)
Mini HDMI

Battery: 2200 mAh 3.7V (108 * 39 * 4.5 mm)

Housing: Plastic. Cheap and cheap.
Dimensions (mm): 195 * 85 * 20
Weight: 235 g
Color: Black / White

Video Support: Maximum 1080P, AVI / MOV / MP4 / RMVB / FLV / MKV.
Audio Support: MP3 / WMA / WAV / APE / AAC / FLAC / OGG.

Appearance

пїЅпїЅпїЅпїЅ FAQ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

1. Appointment of hardware buttons - virtual:

   In this console, for almost any game, you can assign hardware buttons to a virtual (screen)!
   To do this, already being in the game, perform the following actions:
   1. Press the "Start" and "Select" buttons until new virtual buttons appear on the screen;
   2. We expose the buttons that appear on top of the virtual buttons of the game. (first select the button you want to move, then click on its new location);
   3. At the end of the settings, click on the "Config" button, select "Save" and enter the name under which we want to save the setting. I recommend using the name of the game as a name.
   
   
   
2. Screenshot

   Press the "Power" and "Volume-" buttons simultaneously
   
   
3. Login to the recovery:

   1. Turn off the device;
   2. Clamp "Volume +";
   3. Without releasing the "Volume +" press the "Power" button until the operation LED (green) lights up;
   4. When after the logo, the screen blinks and turns black, you need to release the "Volume +" and wait a bit.
   
   
4. Replacing the battery and Photos of the console in the analysis
   
5. Alternative battery replacement
   
6. Wi-Fi antenna enhancement
   
7. Photos of the console in the analysis
   
8. If you need replacement parts for this console, try talking to the seller indicatedHERE IN THISpost
   

Video reviews

1. JXD S5300 Game Console
   A small note: the one who made the review has no idea about reassigning virtual buttons to hardware.
   
2. Mini-review of retro games emulation on the JXD S5300 console
   
3. JXD S5300 Gaming
   PES 2012, Samurai Vengeance II, Arcane Legends, Eternity Warriors 2, POP Classic, Blood Trigger, Dead Trigger, Most Wanted, Plants vs Zombies, Temple Run 2, Tekken 3 (PS1), Mario Kart (N64), Super Mario N64)
   

Instructions on firmware

Post has been editedNaghual80 - 21.09.14, 19:54

Reason for editing: Mini FAQ made

[mart_mamontoff]

ttuner
I checked in the settings, achieved stable 10-12fps. For this game, this is the maximum, there is not enough RAM for ppsspp.

Post has been editedmart_mamontoff - 29.10.18, 09:01

[ttuner]

mart_mamontoff @ 10.29.2018, 08:58

ttuner
I checked in the settings, achieved stable 10-12fps. For this game, this is the maximum, there is not enough RAM for ppsspp.

And control, joystick and stick consoles overlap? It turns out you can either walk or look around.

[Naghual80]

I suppose that you can look around using the finger-on-screen method ...

[mart_mamontoff]

Naghual80,
ttuner
Yes, I use the screen spider. Basically, convenient.
I use the prefix exclusively for retro games, I don’t bother much with the memory bandwidth, since there is a “sewn” VITA,
And it is not intended EXEQ SET for her. It is also very unfortunate that it does not pull the Dreamcast - Shanma has to go on the phone :)

[ttuner]

Well, at least ps1 works. What other similar consoles pulls? In addition to 8-16 bits?

Post has been editedttuner - 31.10.18, 00:15

[mart_mamontoff]

ttuner
In my little educational program about the console there is a photo
with all the emulators that I tested, the ones that
it is possible to use without problems and dances.

[ttuner]

With great difficulty, I shoved the battery from Lenovo p780. It is thicker and wider. It was closed, but in the hdmi area there is a gap, I already tried to undermine the lid a little from the inside, it did not help. But still 4000 and not 2200.

Attached images

Post has been editedttuner - 04.11.18, 13:29

[smokok]

AV_ @ 07.24.13, 19:25

Ah damn forgot, for those who need to improve the waffle

I got such a prefix in my hands, and so in my case, a resistor on the track coming from the antenna was torn out in the Wi-Fi module. Without knowing the denomination, I simply soldered the jumper and the signal became excellent. Thanks to the microscope: D

[Keikato]

Hi guys, there is such a thing, gave this device a year ago in good hands as useless, but good hands managed to cut his face

Now the sensor does not work, tell me where you can order a similar replacement.

Post has been editedKeikato - 07.11.18, 15:26

Reason for editing:

[Voidphoenix]

Good day.
I use the JXD S5300 console (3 months),
I have it breaks (hung on the GamePad),
I made the firmware, I went in and I lost all the games installed before the purchase.
Please tell me where you can find them?

Post has been editedVoidphoenix - 08.12.18, 06:09

[mart_mamontoff]

VoidPhoenix,
What games?
I did not search for Google Play?

[alexander182]

Tell me how to install games on EXEQ mp-1022? Can emulator first? So then how to install and ring it?) Thank you ..

[figarevich]

After the firmware stopped responding to the sensor. Tell me where to dig?