[X]Assistant

[_Danila_Master_]

Internet center model:DIR-620
Discussion, Setup, Help

Attention!
This model has several revisions and build versions with completely different hardware, which require different firmware!

Official Device Information

-[Description]-.-[Specifications]-.-[Downloads]-.-[FTP]-

Official articles

Instructions for setting up a WiMAX connection (YOTA) in the DIR-620 with firmware 1.3.0
Instructions for setting up a Static IP connection on the DIR-620
Example of setting up a 3G connection on the DIR-320NRU and DIR-620 routers for the MTC operator
Selecting a LAN port for connecting an IPTV set-top box
Configuring the DIR-620 in the wireless client mode with firmware 1.3.0
Setup of the network printer on routers of the DIR-620, DIR-632 series
Instructions for setting up PPTP / L2TP connection on the DIR-620
Instructions for setting up a wireless network in the DIR-620
Instructions for setting port forwarding on the DIR-620
Example of configuring the router DIR-XXX as a vlan switch
How to configure Yandex.DNS?
Instructions for setting port forwarding in DIR-620 with firmware 1.3.0
Configuring the DIR-320 / NRU and DIR-620 routers (firmware 1.3.3) for organizing a VPN connection via 2G / 3G networks
Instructions for configuring PPPoE connections on the DIR-620
Instructions for configuring Statis IP connections in DIR-620 with firmware 1.3.0

Brief characteristics of the iron of all revisions

Appearance of all revisions of the Internet center DIR-620

Revisions A1, C1, D1, E1, F1, G1
Revision A / A1A
Audit 620 / GA

Instructions, Firmware, Miscellaneous and useful

---Video lessons---

D-Link.mp4 router software update(10.4 MB)
An example of setting up a connection using VLANs on the router D-Link.mp4(16.11 MB)
Configure D-Link router as a Wi-Fi client.mp4(10.28 MB)

---Iron---

E1 stuffing
Stuffing G1 Revision
Stuffing revision AA1A
Radiator installation
Antenna replacement

---Instructions---

- = D-Link = -
Association of routers in a peer-to-peer network (extension of WiFi-coverage)
Integrating routers into a peer-to-peer network on 2.5.x firmware (Realy mode)
The default Wi-Fi password on new native firmware
Dump the current firmware using Telnet (PuTTY)

- = OpenWRT = -
OpenWrt Chaos Calmer 05/15/1 (Official site)
OpenWrt Wiki in Russian
OpenWrt Wiki (D-Link DIR-620 A1, D1 page,F1)
OpenWrt Chaos Calmer 15.05.1 (catalog with images, including for DIR-620 A1 and D1)
OpenWrt (Download Home)
Exploring OpenWRT: What is the difference between imagesuImageandsysupgrade
Setting up a 3G modem connection
Modem binding (NDIS mode)
IGMP configuration
Solving the problem of hanging Transmission with a Web interface
Updated Russian translation for OpenWRT fromtrace08

- = DD-WRT = -
DD-WRT Documentation (RU)
DD-WRT - Practical Notes

- = Zyxel Keenetic = -
The universal address of the entrance to the WEB-interface of ZyXEL firmware
Extend the functionality of the DIR-620 on ZyXel Keenetic v1.xx firmware
Entware-ng on ZyXEL Keenetic NDMS v2 firmware (revisions A1, F1)
Configuring wireless bridge modes on Kinetics firmware
(important addition in the next post)
Internet center in wireless access point mode
Remove the dump of the current firmware Keenetic v1.xx
Change TTL for any interface on ZyXEL Keenetic NDMSv2 firmware
Testing the speed of the WiFi connection on the latest ZyXEL Keenetic firmware
Setting Ethernet sync parameters (speed / duplex)
The ability to use one of the LAN ports as a WAN port on ZyXEL Keenetic firmware

- = Vampik = -
IPTV setup
Detailed instructions for setting up a router on Entware / Vampik firmware with various types of 3G / 4G modems

- = Wive-NG = -
Modem binding (NDIS mode)

- = Tomato = -
Install Optware
Install IPTV (xupnpd)

- = Miscellaneous = -
Wi-Fi: unobvious nuances (for example, home network)
FAQ from Oleg: Frequently Asked Questions

--- Soft ---

FTP manufacturer (choose according to your revision)
Emulators of WEB-interfaces of D-Link devices
Router Firmware Updater RFU DIR-320 utility (suitable for firmware revisions C1 and G1)
ZTE and Huawei 3G modem mode switcher(to ensure better compatibility with ZyXEL Keenetic Internet Centers)

Good to know

Sometimes, after flashing the router, it may be unavailable for configuration (i.e., an error occurs when trying to log in to 192.168.0.1). Before any dancing with a tambourine, try to update the IP address of your computer. For example, on Windows, use the commands

ipconfig / release
ipconfig / renew

those. keyreleasewe release rather keyrenewupdate the IPv4 address for the specified adapter.

Before experimenting with firmware !!!

---Audit

A1 download

---

Total WIKI by DIR-620 A1 Be sure to read !!!

- = Firmware from D-Link = -
Firmware 1.4.5
Firmware 1.4.6
Firmware 2.5.0
Firmware 2.5.1
Firmware 2.5.15
Firmware 2.5.16
Firmware 3.0.0 (04/26/2017)

- = OpenWRT firmware = -
Transition firmware DIR-620 A1 to OpenWRT

Builds fromsweetbox0778
OpenWRT for the DIR-620 (A1) on 04.24.2015
OpenWRT for DIR-620 (A1) of 08/10/2015
OpenWRT for the DIR-620 (A1) of 08/14/2015
OpenWRT for the DIR-620 (A1) of 09/07/2015
OpenWRT for the DIR-620 (A1), 03/22/2016
OpenWRT for DIR-620 (A1) 03/25/2016
OpenWRT for DIR-620 (A1) of 05/13/2016

- = Zyxel Keenetic firmware = -
Modified firmware Firmware_DIR620A1_KEENETIC-V1.00 [BFW.4] D0, correctly working with many 4G-modems (on STICK firmware)
Modified firmware Firmware-KEENETIC-V1.10.A.RU.Special_For_savagemessiahzine.comand LTE Megaphone M-100-1 modem (on STICK firmware)
Modified firmware Firmware-KEENETIC-V1.11.RU.NDMS_mod_131229182806
Modified firmware ZyXEL Keenetic v.2.01 (BFW.0) C3, which does not require iron revision
ZyXEL Keenetic v2.04 firmware with support for Entware-ng (requires iron revision)
-= ~ =-
Important information on MAC addresses when upgrading to ZyXEL Keenetic v1.xx firmware
Instructions for initializing 4G-modem Megaphone M150-2 (firmware STICK) on Firmware_DIR620A1_KEENETIC-V1.00 [BFW.4] D0
The implementation of two networks and the automation of the inclusion of Wi-Fi on firmware Keenetic v1.xx
Iron and software revision DIR-620 A1 for firmware ZyXEL Keenetic 2.xx
The meaning of the term "yellow eye" for DIR-620 rev.A1

- = Other firmware = -
Wive-NG for DIR-620 (A1)
DD-WRT and 4G-modem Megaphone M150-2 (firmware STICK)

- = Useful = -
Appearance of Recovery Mode in DIR-620 A1 (after firmware 2.5.x)
Instructions for rolling back from firmware 2.5.x to transitional firmware 1.2.102
Firmware (check for availability) of the uboot version 3.3.2 loader in DIR-620 A1
Algorithm "raising the brick" (recovery) revision A1
An example of a successful recovery DIR-620 rev.A1
Bootloader recovery on revision A1 via JTAG
DIR-620 (A1) memory blocks dump (ZyXEL Keenetic v1.00 firmware / Ralink UBoot loader Version: 3.3.2_ZyXEL)
Offline copy of the forumdir620.ipb.su
Internet speed testing on the DIR-620 A1 under different firmware (L2TP Beeline 60 Mbps)

---AuditB1---

Revision completely identical to C1 ...

---AuditC1---

- = Firmware from D-Link = -
Firmware 1.0.29 (cameraman for RosTeleCom)
Firmware 1.0.36 (camera for RosTeleCom)
Firmware 2.5.15

- = Useful = -
Vampik firmware installation procedure
Tomato firmware installation procedure
Instructions for configuring Tomato
Recovery after unsuccessful firmware DIR-620 C1
Connecting and setting up a 4G modem (in RNDIS mode) on Vampik firmware
How to change the firmware on the router from versions 2.0.8 - 2.0.9 and the like to earlier firmware

---AuditD1---

- = Firmware from D-Link = -
D-Link firmware archive (from version 1.3.3 to 2.0.13)
Firmware 2.5.15
Firmware 1.0.27 (camera for RosTeleCom)
Actual night firmware

- = OpenWRT firmware = -
Openwrt-dir-620-d1_1.7_full_beta.zip (stably working with modems in NDIS mode)
Another similar build (openwrt-ramips-rt305x-dir-620-d1-squashfs-sysupgrade_01.09.2013)

Patch usb initialization when assembling the firmware (USB2 Fix)
OpenWRT (05.15.1) for the DIR-620 (D1) USB2 Fixedfrom123serge123

Builds fromsweetbox0778
OpenWRT for DIR-620 (D1) on 04/24/2015
OpenWRT for DIR-620 (D1) dated 08/10/2015
OpenWRT for DIR-620 (D1) dated 08/14/2015
OpenWRT for DIR-620 (D1) from 09/07/2015
OpenWRT for DIR-620 (D1) from 03/22/2016
OpenWRT for DIR-620 (D1) 03/25/2016 (USB2 Fixed)
OpenWRT for DIR-620 (D1) of 05/13/2016 (USB2 Fixed)

OpenWrt firmware archive fromOlegulas

- = Zyxel Keenetic firmware = -
ZyXEL KEENETIC_V1.00 [BFW.4] _D0 modified firmware specifically for DIR-620 (D1) fromRusink

- = Other firmware = -
Archive of firmware Wive (from version 4.5.0b to 4.6.9)
Wive-NG 5.2.6 firmware for D-Link DIR-620 Rev. D1
Archive (Firmware, information, different and useful for Dir-620 rev D1) # 1
Archive (firmware, information, different and useful for Dir-620 rev D1) # 2
Resource (Firmware, information, different and useful for Dir-620 rev D1 # 3
Firmwares under which D-Link DIR-620 D1 works with the Huawei E3272 modem

- = Useful = -
Algorithm 4G modem settings on ZyXEL Keenetic firmware for DIR-620 D1
Dump of memory blocks DIR-620 (D1) (D-Link firmware v1.3.5 / bootloader Ralink UBoot Version: 3.5.2.0)
Dump of memory blocks DIR-620 (D1) (firmware D-Link v2.5.15 / bootloader Ralink UBoot Version: 3.5.2.0)
Dump of memory blocks DIR-620 (D1) (firmware D-Link v1.3.6

---AuditE1---

- = Firmware from D-Link = -
Firmware 2.5.11
Firmware 2.5.13
Firmware 2.5.17
Firmware 2.5.18
Nightly build firmware 3.0.0
Current nightly firmware 3.0.0

- = Useful = -
Dump of memory blocks DIR-620 (E1) (firmware D-Link v2.5.18)

---AuditF1---

- = Firmware from D-Link = -
Firmware 1.0.18 (camera for RosTeleCom)
Firmware 2.5.15
Firmware 2.5.22
Current nightly firmware 3.0.0

- = Zyxel Keenetic firmware = -
ZyXEL Keenetic Omni II v2.02 Firmware [AAKU.3]
ZyXEL Keenetic Omni II Firmware v2.05 (AAUS.2) B5
ZyXEL Keenetic Omni II v2.05 firmware with support for Entware-ng

- = OpenWRT firmware = -
Information on official OpenWRT / LEDE assemblies (from RT-N14U or Omni II Kinetics) that are suitable for F1
OpenWRT BB final for DIR-620 F1

- = Other firmware = -
В© 2011-2016 Padavan & N56U project community
Installing Padavan firmware on the DIR-620 F1
Firmware from Padavan for nexx3020 and TCL-T1 routers (almost full dir-620 f1 analogs)
Padavan firmware for ZyXEL Keenetic Omni II 3.4.3.9-099 routers
Padavan firmware for ZyXEL Keenetic Omni II 3.4.3.9L-100 routers
WIVE-NG

- = Useful = -
Features of work with the Huawei E3372 modem on firmware 2.5.15
Information on compatibility with ZyXEL routers
Important information about the size of RAM in different batches of Internet centers DIR-620 / D / F1(before trying to change the bootloader to ASUS-ovsky)
Unlocking RAM up to 64 Megabytes (replacing the bootloader with a uboot from ASUS RT-N14U) / Using alternative firmware on F1
Detailed instructions for replacing the bootloader (u-boot) in the DIR-620 rev.F1 through the firmware OpenWrt
Software recovery work WIFI / uboot from ZyXEL Keenetic Lite 2 (similar to the loader from Omni)
Recovery of F1 revision via JTAG and SPI Flash Programmer
Dump of memory blocks DIR-620 (F1) (firmware D-Link v2.0.8 / bootloader Ralink UBoot Version: 4.1.1.0)
Bootloader (uboot) from firmware 2.5.22
Uboot alternative - Breed - Advanced bootloader for the DIR-620 (F1). Link to the article with description and features on HAK.RUhere.
GPL code: DIR-620 F1 FW v2.0.8 (firmware sources)

---AuditG1---

- = Firmware from D-Link = -
Firmware 2.5.10
Firmware 2.5.11
Firmware 2.5.14
Firmware 2.5.15
Firmware 2.5.16
Firmware 2.5.18
Firmware 2.5.19
Firmware 2.5.20
Firmware 3.0.0 (06/20/2017)
Firmware 3.0.0 (09/26/2017)
Current nightly firmware 3.0.0

- = OpenWRT firmware = -
Build OpenWrt (Chaos Calmer 15.05) for G1 (without WiFi)
OpenWrt - an alternative solution for WiFi

- = Other firmware = -
Advanced Tomato for G1
(tomato-K26USB-1.28.AT-RT-N5x-MIPSR2-2.8-130-VPN for those who could not download).
After the firmware, the admin panel of the router is available only via Wi-Fi.
Tomato firmware with C1 running on G1 + settings

- = Useful = -
G1 Information
We are lowering the frequencies in favor of the stable operation of the router
Software recovery of the reset button on G1 (after firmware 2.5.x)
Dump of memory blocks DIR-620 (G1) (D-Link v2.5.10 firmware / Native bootloader)

---AuditAA1A---

- = Firmware from D-Link = -
Firmware 2.5.2
Firmware 2.5.3
Nightly build firmware 3.0.0
Current nightly firmware 3.0.0

- = Useful = -
AA1A Information
Marking of the main chips
Dump native loader (mtd0)

---AuditGA---

- = Firmware from D-Link = -
Firmware 2.5.6
Firmware 2.5.9
Nightly build firmware 3.0.0
Current nightly firmware 3.0.0

Information on "Night" firmware

Firmware:
Q:"What is night firmware?".
A:The formula is simple: Last release + current cumulative edits for known issues.

Q:"How is the nightie different from the release?"
A:It is necessary to understand that this is a “draft”. When a new “nightie” is being made, something is fixed or optimized in it, but this firmware (unlike the release version) did not pass the entire set of tests for internal and external compatibility. Drafts, on the other hand, are also correct. Yes, the risk of running into a glitch is higher, but "baubles and fiches" in "nightie" appear much earlier than in releases.
What to use - you choose.

Q:"Where can I get the current nightie?"
A:In the Telegram there is a bot@dlink_rubotdistributing "night" firmware on most current models.

Even if the bot does not distribute the firmware specifically for your model / revision, on the Telegram channelD-Link_RUThere will surely be people who can help you with your question.

Results of previous surveys

from 05/16/2016 to 09/09/2016:

Current changes in the header

18.02.2019- added:
Detailed instructions for setting up a router on Entware / Vampik firmware with various types of 3G / 4G modems

Change history

14.01.2019- added:
Information on official OpenWRT / LEDE assemblies (from RT-N14U or Omni II Kinetics) that are suitable for F1

07.10.2018- updated:
Current nightly firmware 3.0.0
for the Internet center DIR-620 revision E1 - Version 10/02/2018
for the Internet center DIR-620 revision F1 - Version 10/02/2018
for the Internet center DIR-620 revision AA1A - Version 10/02/2018
for the Internet center DIR-620 GA revision - Version 10/02/2018

04.10.2018- added:
The ability to use one of the LAN ports as a WAN port on ZyXEL Keenetic firmware

22.08.2018- added:
DIR-620 (E1) Dump of memory blocks (firmware D-Link v2.5.18)

20.08.2018- updated:
DIR-620 (E1) - Actual Night Firmware 3.0.0
DIR-620 (F1) - Actual Night Firmware 3.0.0
DIR-620 (AA1A) - Actual Night Firmware 3.0.0
DIR-620 (GA) - Actual Night Firmware 3.0.0

14.06.2018- added:
DIR-620 (C1) - Firmware 2.5.15
DIR-620 (F1) - Actual Night Firmware 3.0.0
DIR-620 (F1) - Important information regarding the size of RAM in different batches of Internet centers DIR-620 / D / F1(before trying to change the bootloader to ASUS-ovsky)

13.06.2018- added:
DIR-620 (D1) - Actual Night Firmware
DIR-620 (G1) - Actual Night Firmware 3.0.0
DIR-620 (E1) - Actual Night Firmware 3.0.0
DIR-620 (AA1A) - Actual Night Firmware 3.0.0
DIR-620 (GA) - Actual Night Firmware 3.0.0

06.12.2017- added:
DIR-620 (AA1A), DIR-620 (GA), DIR-620 (E1A) - Nightly firmware build 3.0.0 from 12/06/2017

19.10.2017- added:
DIR-620 (AA1A), DIR-620 (GA), DIR-620 (E1A) - Nightly firmware build 3.0.0 dated 10/17/2017

06.10.2017- added:
DIR-620 (A1) - Firmware 3.0.0 (04/26/2017)

30.09.2017- added:
DIR-620 (G1) - Firmware 3.0.0 (09/26/2017)

13.09.2017- added:
DIR-620 (D1) - Dump of memory blocks (firmware D-Link v2.5.15 / bootloader Ralink UBoot Version: 3.5.2.0)
DIR-620 (A1) Internet speed testing under different firmware (L2TP Beeline 60 Mb / s)

27.06.2017- added:
Offline copy of the forumdir620.ipb.su

25.06.2017- added:
DIR-620 (G1) - Firmware 3.0.0 (06/20/2017)

21.04.2017- added:
DIR-620 (A1) - Firmware 2.5.16

22.03.2017- added:
DIR-620 (A1) - Testing the speed of the WiFi connection on the latest ZyXEL Keenetic firmware
Setting Ethernet sync parameters (speed / duplex)
Updated Russian translation for OpenWRT fromtrace08

19.01.2017- added:
DIR-620 (C1), DIR-620 (D1) - Operator firmware RosTeleCom

12.01.2017- added:
DIR-620 (A1) - Firmware 1.4.5
Change TTL for any interface on ZyXEL Keenetic NDMSv2 firmware

18.11.2016- added:
DIR-620 (GA) - Firmware 2.5.9

16.11.2016- added:
DIR-620 (F1) - Detailed instructions for replacing the bootloader (u-boot) via the OpenWrt firmware

21.09.2016- added:
FAQ from Oleg: Frequently Asked Questions

19.09.2016- added:
DIR-620 (F1) - Firmware from Padavan for nexx3020 and TCL-T1 routers (almost full dir-620 f1 analogs)
DIR-620 (F1) - Uboot alternative - Breed - Advanced bootloader. Link to the article with description and features on HAK.RUhere.

09.09.2016- added:
- New poll (added a few, in my opinion, important points).

07.09.2016- added:
DIR-620 (F1) - Software recovery of WIFI / Uboot operation from ZyXEL Keenetic Lite 2 (similar to the Omni bootloader is not recommended)
DIR-620 (C1) - Connecting and configuring 4G modem (in RNDIS mode) on Vampik firmware

28.08.2016- added:
DIR-620 (A1) - ZyXEL Keenetic v2.04 firmware (BFW.9) C7 (kn_ra_delta_2.04.C.7.0-9.zip)

09.08.2016- added:
DD-WRT Documentation (RU)
DD-WRT - Practical Notes

03.08.2016- added:
GPL code: DIR-620 F1 FW v2.0.8 (firmware sources)

30.07.2016- added:
OpenWrt Chaos Calmer 05/15/1 (Official site)
OpenWrt Wiki in Russian
OpenWrt Wiki (D-Link DIR-620 A1, D1 page,F1)
OpenWrt Chaos Calmer 15.05.1 (catalog with images, including for DIR-620 A1 and D1)
OpenWrt (Download Home)

26.07.2016- restored:
DIR-620 (D1) - Archive (Firmware, Information, Different and Useful) # 2

07.07.2016- added:
DIR-620 (F1) - firmware 1.0.18 (cameraman RosTeleCom)
DIR-620 (F1) - bootloader (uboot) from firmware 2.5.22

05.07.2016- added:
Exploring OpenWRT: What is the difference between imagesuImageandsysupgrade
Wi-Fi: unobvious nuances (for example, home network)

04.07.2016- added:
DIR-620 (F1) - dump of memory blocks
DIR-620 (G1) - dump of memory blocks

03.07.2016- added:
DIR-620 (E1) - firmware 2.5.18

19.06.2016- added:
DIR-620 (D1) - firmware OpenWRT (15.05.1) USB2 Fixed from123serge123

11.06.2016- added:
DIR-620 (GA) - GA revision materials ("gigabit barrel")

28.05.2016- added:
, DIR-620 (AA1A) - Materials on revision AA1A ("white barrel")

27.05.2016- added:
Installation instructions for Optware on Tomato firmware

18.05.2016- added:
DIR-620 (A1), DIR-620 (F1) - instructions for installing Entware-ng on ZyXEL Keenetic NDMS v2 firmware
DIR-620 (F1) - ZyXEL Keenetic Omni II Firmware v2.05 (AAUS.2) B5

17.05.2016- added:
- Instructions from the official site

16.05.2016- added:
- Poll "What revision of DIR-620 are you using?",
- User post count

For questions regarding the operation of native internet cent firmware, you can also refer toD-Link employeehere on the forumor through a group in the Telegram.


Post has been edited_Danila_Master_ - 18.02.19, 13:08

[Keen_mc]

D-Link DIR-620 D1
openwrt-18.06.1
USB flash drive connected
Transmission downloads 2 megabytes and stops the download with an error
Unable to save file: No such file or directory

What just did not google already. And I gave the rights, and included, disconnected the folder of not finished downloads and it does not help.
How to beat this?

Screen

[Zorkpos]

Who has a DIR-620 E1 please make a good photo place with CSS strapping elements. that it would be possible to disassemble the inscriptions. Thank.

Usb is no longer relevant. It is necessary to mark around the 6-foot pw by 5 volts.

Post has been editedZorkpos - 10.03.19, 18:53

[_Knyazev_]

Good day!

One thing interests, here I did not find it: there is a 4G modem Huawei E8372 (MTS 8211F) and DIR-620 A1 with Keenetic v2.01 firmware (BFW.0) C3
I found information that this 4G modem is supported on Keenetic firmware v2.06.B4 and higher. Bottom line: this modem is not yet possible to be installed on the DIR-620 A1 with Keenetic v2.01 (BFW.0) C3 firmware or maybe there are any loopholes / tips in this direction?
Thank you in advance!

Post has been edited_Knyazev_ - 10.03.19, 23:48

[der_KeTZeR]

_Knyazev_, fill openvrt then

[bessok]

Guys, good afternoon. There is this miracle Dir-630 rev A1 I want to reflash it on OpenWRT 06/18/1 just as I read the topic a little confused. The router has firmware 1.0.6 and on the openwrt site, as I understood from the description, it must be flashed to version 1.2.x which is not here. And in general, correctly, I realized that it should be reflashed to the factory and then to openwrt? Or just download the .bin file and re-flash it to version 18.06.1 via the web? Here is a photo help pliz
thank

P.s. The reason for the flashing is the speed of the cable 10-12mb and by Wi-fi it barely reaches 200kb ...

[evzomsk]

Bessok @ 03/11/19, 11:13 PM

I want to reflash it on OpenWRT 18 ... the reason for the flashing is the speed on the cable 10-12mb and on Wi-fi it barely reaches 200kb

OpenWRT is not the smartest, there is no support for HW NAT, especially the latest version 18.
I would stick a radiator and fill in a modified Kinetics 2.01 / Vive / Padavan. If USB functionality is important, then iron revision + Kin 2.04. If so, and OpenWRT - then the SS 15.05 (1) is not higher, IMHO.
Here are the hats for the seed:D-Link DIR-620 - Discussion (Post evzomsk # 63690583)

Post has been editedevzomsk - 11.03.19, 20:54

[bessok]

Evzomsk @ 03/11/19, 19:50

OpenWRT is not the smartest, there is no support for HW NAT, especially the latest version 18.

evzomsk,
There is no possibility to stick a radiator
Is it just necessary to flash the update in the router or something else?

[evzomsk]

Bessok @ 03/12/19, 01:02

Is it just necessary to flash the update in the router or something else?

The radiator is highly recommended for stability / long life. Custom usually sewn from the emergency gang. All infa is in the header. Do not be lazy to read. OpenWRT is usually 2 factory and sysupgrade images.

Post has been editedevzomsk - 11.03.19, 22:10

[Andrei-Gavs]

Good afternoon! Dir-620 rev. A1 firmware Kinetics 2.01. Is there any way to organize a DLNA server? Connect HDD to the router, and broadcast video on Smart TV? Is this possible on some other firmware?

[Andrei-Gavs]

On firmware 3.0.0 as far as I understand there is such an opportunity. And on Kinetek, even if you upgrade to 2.0.4, it will not work?

[_Danila_Master_]

Andrei-GavsYou can even raise this DLNA:Firmware-KEENETIC-V1.11.RU.NDMS_mod_131229182806...

[Andrei-Gavs]

I now have firmware 2.0.1, I did not want to roll back to 1.11. I want to either Kinetics 2.0.4 or native 3.0.0

[_Danila_Master_]

Andrei-Gavs
And what is there to roll back?!. Via Web Face / Firmware Update ...
2.04 - WiFi will not work without a soldered resistor ... Soldered?!. (Yes, and standard in components 2.04 it, DLNA, it seems not installed too ... We'll have to do DIR updated ...)
At home - if you took care of the emergency mode in advance, then there are no problems either ...

Post has been edited_Danila_Master_ - 14.03.19, 15:25

[Andrei-Gavs]

They write that "In the V2 series firmware, additional applications can not be launched" as I understand it either on my 2.0.1 or 2.0.4 DLNA I can not do it. Apparently you have to sew the standard 3.0.0. Who flashed revision A1 (black box) with firmware 3.0.0, does this feature work there?

[_Danila_Master_]

Andrei-Gavs
Before you ask questions (state about what you are supposedly "writing"), you would read the topic header ... As a rule, it helps to understand the situation ...;)

Post has been edited_Danila_Master_ - 14.03.19, 15:58

[Andrei-Gavs]

Yes, I read and read, but I don’t find anything about DLNA.

[_Danila_Master_]

[email protected], 16:08

Yes, I kind of read and read

me about that

Andrei-Gavs @ 03/14/19, 15:55

"Additional applications cannot be launched in V2 firmware"

fundamentally wrong ...
and what

Andrei-Gavs @ 03/14/19, 15:55

I can not do anything on 2.0.4 DLNA

also wrong ...

Threat in the cap material, which implies that the reader will understand how to solve your question ...;)

[Andrei-Gavs]

_Danila_Master_,
I do not find! If you know how to configure on my firmware 2.0.1 DLNA please indicate!

[_Danila_Master_]

Andrei-Gavs @ 03/14/19, 16:23

If you know how to configure on my firmware 2.0.1 DLNA please indicate!

But did I talk about 2.01?!. Re-read posts ...

[Andrei-Gavs]

_Danila_Master_,
And again without an answer, only the message "Go read ...". I do not find! I ask for cultural help.
If anyone can tell me how to raise DLNA on Kinetics 2.0.1. If it is impossible on it, can it be done on Kinetics 2.0.4? How?