439 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> D-Link DIR-620 - Discussion | [wifirouter] Discussion, firmware, problem solving
D-Link DIR-620
What revisions of the DIR-620 are you using?
Revision A1 [ 830 ] ** [17,74%]
C1 audit [ 248 ] ** [5,3%]
Revision D1 [ 509 ] ** [10,88%]
E1 revision [ 73 ] ** [1,56%]
F1 revision [ 163 ] ** [3,48%]
Revision G1 [ 150 ] ** [3,21%]
AA1A Audit (White Barrel) [ 68 ] ** [1,45%]
GA revision ("gigabit barrel") [ 8 ] ** [0,17%]
What firmware is installed?
D-Link firmware [ 1401 ] ** [29,95%]
OpenWRT firmware [ 167 ] ** [3,57%]
ZyXEL Keenetic Firmware [ 379 ] ** [8,1%]
Wive-NG firmware [ 42 ] ** [0,9%]
DD-WRT firmware [ 36 ] ** [0,77%]
Vampik firmware [ 46 ] ** [0,98%]
Tomato firmware [ 16 ] ** [0,34%]
Tomato by Shibby Firmware [ 10 ] ** [0,21%]
Advanced Tomato Firmware [ 2 ] ** [0,04%]
Other [ 39 ] ** [0,83%]
What type of connection is used?
Dynamic IP [ 836 ] ** [17,87%]
Static IP [ 271 ] ** [5,79%]
PPPoE [ 609 ] ** [13,02%]
PPTP [ 59 ] ** [1,26%]
L2TP [ 126 ] ** [2,69%]
Mobile Internet (GPRS, 3G, 4G / LTE) [ 321 ] ** [6,86%]
Router in client mode (Wi-Fi) [ 125 ] ** [2,67%]
How do you rate the work of DIR-620 routers (on a five-point scale):
filling and characteristics - "5" [ 394 ] ** [8,42%]
filling and characteristics - "4" [ 825 ] ** [17,64%]
filling and characteristics - "3" [ 543 ] ** [11,61%]
filling and characteristics - "2" [ 98 ] ** [2,09%]
filling and characteristics - "1" [ 72 ] ** [1,54%]
stability of work - "5" [ 310 ] ** [6,63%]
stability of work - "4" [ 480 ] ** [10,26%]
stability of work - "3" [ 457 ] ** [9,77%]
stability of work - "2" [ 177 ] ** [3,78%]
stability of work - "1" [ 128 ] ** [2,74%]
technical support - "5" [ 178 ] ** [3,81%]
technical support - "4" [ 302 ] ** [6,46%]
technical support - "3" [ 410 ] ** [8,76%]
technical support - "2" [ 159 ] ** [3,4%]
technical support - "1" [ 255 ] ** [5,45%]
Which company router would you prefer if you buy a new one:
MikroTik [ 337 ] ** [7,2%]
ZyXEL [ 828 ] ** [17,7%]
Asus [ 356 ] ** [7,61%]
TP-Link [ 345 ] ** [7,37%]
D-Link [ 329 ] ** [7,03%]
Linksys [ 43 ] ** [0,92%]
Netgear [ 46 ] ** [0,98%]
TRENDnet [ 8 ] ** [0,17%]
Huawei [ 69 ] ** [1,47%]
Other [ 247 ] ** [5,28%]
Total votes: 4678
 
_Danila_Master_
Message#1
24.03.13, 14:41
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 4665
Check in: 09.12.12

Reputation:-  778  +

Attached Image

Internet center model:DIR-620
Discussion, Setup, Help

Attention!
This model has several revisions and build versions with completely different hardware, which require different firmware!


Official Device Information
-[Description]-.-[Specifications]-.-[Downloads]-.-[FTP]-
Official articles
Attached ImageInstructions for setting up a WiMAX connection (YOTA) in the DIR-620 with firmware 1.3.0
Attached ImageInstructions for setting up a Static IP connection on the DIR-620
Attached ImageExample of setting up a 3G connection on the DIR-320NRU and DIR-620 routers for the MTC operator
Attached ImageSelecting a LAN port for connecting an IPTV set-top box
Attached ImageConfiguring the DIR-620 in the wireless client mode with firmware 1.3.0
Attached ImageSetup of the network printer on routers of the DIR-620, DIR-632 series
Attached ImageInstructions for setting up PPTP / L2TP connection on the DIR-620
Attached ImageInstructions for setting up a wireless network in the DIR-620
Attached ImageInstructions for setting port forwarding on the DIR-620
Attached ImageExample of configuring the router DIR-XXX as a vlan switch
Attached ImageHow to configure Yandex.DNS?
Attached ImageInstructions for setting port forwarding in DIR-620 with firmware 1.3.0
Attached ImageConfiguring the DIR-320 / NRU and DIR-620 routers (firmware 1.3.3) for organizing a VPN connection via 2G / 3G networks
Attached ImageInstructions for configuring PPPoE connections on the DIR-620
Attached ImageInstructions for configuring Statis IP connections in DIR-620 with firmware 1.3.0
Brief characteristics of the iron of all revisions
Attached Image
Appearance of all revisions of the Internet center DIR-620
*Revisions A1, C1, D1, E1, F1, G1
*Revision A / A1A
*Audit 620 / GA
Instructions, Firmware, Miscellaneous and useful
---Video lessons---
---Iron---
*E1 stuffing
*Stuffing G1 Revision
*Stuffing revision AA1A
*Radiator installation
*Antenna replacement
---Instructions---
- = D-Link = -
*Association of routers in a peer-to-peer network (extension of WiFi-coverage)
*Integrating routers into a peer-to-peer network on 2.5.x firmware (Realy mode)
*The default Wi-Fi password on new native firmware
*Dump the current firmware using Telnet (PuTTY)

- = OpenWRT = -
Attached ImageOpenWrt Chaos Calmer 05/15/1 (Official site)
Attached ImageOpenWrt Wiki in Russian
Attached ImageOpenWrt Wiki (D-Link DIR-620 A1, D1 page,F1)
Attached ImageOpenWrt Chaos Calmer 15.05.1 (catalog with images, including for DIR-620 A1 and D1)
Attached ImageOpenWrt (Download Home)
Attached ImageExploring OpenWRT: What is the difference between imagesuImageandsysupgrade
*Setting up a 3G modem connection
*Modem binding (NDIS mode)
*IGMP configuration
*Solving the problem of hanging Transmission with a Web interface
*Updated Russian translation for OpenWRT fromtrace08

- = DD-WRT = -
Attached ImageDD-WRT Documentation (RU)
Attached ImageDD-WRT - Practical Notes

- = Zyxel Keenetic = -
*The universal address of the entrance to the WEB-interface of ZyXEL firmware
*Extend the functionality of the DIR-620 on ZyXel Keenetic v1.xx firmware
*Entware-ng on ZyXEL Keenetic NDMS v2 firmware (revisions A1, F1)
*Configuring wireless bridge modes on Kinetics firmware
(*important addition in the next post)
*Internet center in wireless access point mode
*Remove the dump of the current firmware Keenetic v1.xx
*Change TTL for any interface on ZyXEL Keenetic NDMSv2 firmware
*Testing the speed of the WiFi connection on the latest ZyXEL Keenetic firmware
Attached ImageSetting Ethernet sync parameters (speed / duplex)
*The ability to use one of the LAN ports as a WAN port on ZyXEL Keenetic firmware

- = Vampik = -
*IPTV setup
*Detailed instructions for setting up a router on Entware / Vampik firmware with various types of 3G / 4G modems

- = Wive-NG = -
*Modem binding (NDIS mode)

- = Tomato = -
*Install Optware
*Install IPTV (xupnpd)

- = Miscellaneous = -
Attached ImageWi-Fi: unobvious nuances (for example, home network)
Attached ImageFAQ from Oleg: Frequently Asked Questions
--- Soft ---
Attached ImageFTP manufacturer (choose according to your revision)
*Emulators of WEB-interfaces of D-Link devices
*Router Firmware Updater RFU DIR-320 utility (suitable for firmware revisions C1 and G1)
*ZTE and Huawei 3G modem mode switcher(to ensure better compatibility with ZyXEL Keenetic Internet Centers)
Good to know
Sometimes, after flashing the router, it may be unavailable for configuration (i.e., an error occurs when trying to log in to 192.168.0.1). Before any dancing with a tambourine, try to update the IP address of your computer. For example, on Windows, use the commands
ipconfig / release
ipconfig / renew
those. keyreleasewe release rather keyrenewupdate the IPv4 address for the specified adapter.
Before experimenting with firmware !!!
---Audit

A1 download

---
* Total WIKI by DIR-620 A1 Be sure to read !!!

- = Firmware from D-Link = -
*Firmware 1.4.5
*Firmware 1.4.6
*Firmware 2.5.0
*Firmware 2.5.1
*Firmware 2.5.15
*Firmware 2.5.16
*Firmware 3.0.0 (04/26/2017)

- = OpenWRT firmware = -
*Transition firmware DIR-620 A1 to OpenWRT

Builds fromsweetbox0778
*OpenWRT for the DIR-620 (A1) on 04.24.2015
*OpenWRT for DIR-620 (A1) of 08/10/2015
*OpenWRT for the DIR-620 (A1) of 08/14/2015
*OpenWRT for the DIR-620 (A1) of 09/07/2015
*OpenWRT for the DIR-620 (A1), 03/22/2016
*OpenWRT for DIR-620 (A1) 03/25/2016
*OpenWRT for DIR-620 (A1) of 05/13/2016

- = Zyxel Keenetic firmware = -
*Modified firmware Firmware_DIR620A1_KEENETIC-V1.00 [BFW.4] D0, correctly working with many 4G-modems (on STICK firmware)
*Modified firmware Firmware-KEENETIC-V1.10.A.RU.Special_For_savagemessiahzine.comand LTE Megaphone M-100-1 modem (on STICK firmware)
*Modified firmware Firmware-KEENETIC-V1.11.RU.NDMS_mod_131229182806
*Modified firmware ZyXEL Keenetic v.2.01 (BFW.0) C3, which does not require iron revision
*ZyXEL Keenetic v2.04 firmware with support for Entware-ng (requires iron revision)
-= ~ =-
*Important information on MAC addresses when upgrading to ZyXEL Keenetic v1.xx firmware
*Instructions for initializing 4G-modem Megaphone M150-2 (firmware STICK) on Firmware_DIR620A1_KEENETIC-V1.00 [BFW.4] D0
*The implementation of two networks and the automation of the inclusion of Wi-Fi on firmware Keenetic v1.xx
*Iron and software revision DIR-620 A1 for firmware ZyXEL Keenetic 2.xx
*The meaning of the term "yellow eye" for DIR-620 rev.A1

- = Other firmware = -
*Wive-NG for DIR-620 (A1)
*DD-WRT and 4G-modem Megaphone M150-2 (firmware STICK)

- = Useful = -
*Appearance of Recovery Mode in DIR-620 A1 (after firmware 2.5.x)
*Instructions for rolling back from firmware 2.5.x to transitional firmware 1.2.102
*Firmware (check for availability) of the uboot version 3.3.2 loader in DIR-620 A1
*Algorithm "raising the brick" (recovery) revision A1
*An example of a successful recovery DIR-620 rev.A1
*Bootloader recovery on revision A1 via JTAG
*DIR-620 (A1) memory blocks dump (ZyXEL Keenetic v1.00 firmware / Ralink UBoot loader Version: 3.3.2_ZyXEL)
*Offline copy of the forumdir620.ipb.su
*Internet speed testing on the DIR-620 A1 under different firmware (L2TP Beeline 60 Mbps)
---AuditB1---
Revision completely identical to C1 ...
---AuditC1---
- = Firmware from D-Link = -
*Firmware 1.0.29 (cameraman for RosTeleCom)
*Firmware 1.0.36 (camera for RosTeleCom)
*Firmware 2.5.15

- = Useful = -
*Vampik firmware installation procedure
*Tomato firmware installation procedure
*Instructions for configuring Tomato
*Recovery after unsuccessful firmware DIR-620 C1
*Connecting and setting up a 4G modem (in RNDIS mode) on Vampik firmware
*How to change the firmware on the router from versions 2.0.8 - 2.0.9 and the like to earlier firmware
---AuditD1---
- = Firmware from D-Link = -
Attached ImageD-Link firmware archive (from version 1.3.3 to 2.0.13)
*Firmware 2.5.15
*Firmware 1.0.27 (camera for RosTeleCom)
*Actual night firmware

- = OpenWRT firmware = -
*Openwrt-dir-620-d1_1.7_full_beta.zip (stably working with modems in NDIS mode)
*Another similar build (openwrt-ramips-rt305x-dir-620-d1-squashfs-sysupgrade_01.09.2013)

*Patch usb initialization when assembling the firmware (USB2 Fix)
* OpenWRT (05.15.1) for the DIR-620 (D1) USB2 Fixedfrom123serge123

Builds fromsweetbox0778
*OpenWRT for DIR-620 (D1) on 04/24/2015
*OpenWRT for DIR-620 (D1) dated 08/10/2015
*OpenWRT for DIR-620 (D1) dated 08/14/2015
*OpenWRT for DIR-620 (D1) from 09/07/2015
*OpenWRT for DIR-620 (D1) from 03/22/2016
* OpenWRT for DIR-620 (D1) 03/25/2016 (USB2 Fixed)
* OpenWRT for DIR-620 (D1) of 05/13/2016 (USB2 Fixed)

Attached ImageOpenWrt firmware archive fromOlegulas

- = Zyxel Keenetic firmware = -
Attached ImageZyXEL KEENETIC_V1.00 [BFW.4] _D0 modified firmware specifically for DIR-620 (D1) fromRusink

- = Other firmware = -
Attached ImageArchive of firmware Wive (from version 4.5.0b to 4.6.9)
*Wive-NG 5.2.6 firmware for D-Link DIR-620 Rev. D1
*Archive (Firmware, information, different and useful for Dir-620 rev D1) # 1
*Archive (firmware, information, different and useful for Dir-620 rev D1) # 2
*Resource (Firmware, information, different and useful for Dir-620 rev D1 # 3
*Firmwares under which D-Link DIR-620 D1 works with the Huawei E3272 modem

- = Useful = -
*Algorithm 4G modem settings on ZyXEL Keenetic firmware for DIR-620 D1
*Dump of memory blocks DIR-620 (D1) (D-Link firmware v1.3.5 / bootloader Ralink UBoot Version: 3.5.2.0)
*Dump of memory blocks DIR-620 (D1) (firmware D-Link v2.5.15 / bootloader Ralink UBoot Version: 3.5.2.0)
*Dump of memory blocks DIR-620 (D1) (firmware D-Link v1.3.6
---AuditE1---
- = Firmware from D-Link = -
*Firmware 2.5.11
*Firmware 2.5.13
*Firmware 2.5.17
*Firmware 2.5.18
*Nightly build firmware 3.0.0
*Current nightly firmware 3.0.0

- = Useful = -
*Dump of memory blocks DIR-620 (E1) (firmware D-Link v2.5.18)
---AuditF1---
- = Firmware from D-Link = -
*Firmware 1.0.18 (camera for RosTeleCom)
*Firmware 2.5.15
*Firmware 2.5.22
*Current nightly firmware 3.0.0

- = Zyxel Keenetic firmware = -
*ZyXEL Keenetic Omni II v2.02 Firmware [AAKU.3]
*ZyXEL Keenetic Omni II Firmware v2.05 (AAUS.2) B5
*ZyXEL Keenetic Omni II v2.05 firmware with support for Entware-ng

- = OpenWRT firmware = -
*Information on official OpenWRT / LEDE assemblies (from RT-N14U or Omni II Kinetics) that are suitable for F1
*OpenWRT BB final for DIR-620 F1

- = Other firmware = -
* © 2011-2016 Padavan & N56U project community
*Installing Padavan firmware on the DIR-620 F1
*Firmware from Padavan for nexx3020 and TCL-T1 routers (almost full dir-620 f1 analogs)
Attached ImagePadavan firmware for ZyXEL Keenetic Omni II 3.4.3.9-099 routers
Attached ImagePadavan firmware for ZyXEL Keenetic Omni II 3.4.3.9L-100 routers
*WIVE-NG

- = Useful = -
*Features of work with the Huawei E3372 modem on firmware 2.5.15
*Information on compatibility with ZyXEL routers
* Important information about the size of RAM in different batches of Internet centers DIR-620 / D / F1(before trying to change the bootloader to ASUS-ovsky)
*Unlocking RAM up to 64 Megabytes (replacing the bootloader with a uboot from ASUS RT-N14U) / Using alternative firmware on F1
*Detailed instructions for replacing the bootloader (u-boot) in the DIR-620 rev.F1 through the firmware OpenWrt
*Software recovery work WIFI / uboot from ZyXEL Keenetic Lite 2 (similar to the loader from Omni)
*Recovery of F1 revision via JTAG and SPI Flash Programmer
*Dump of memory blocks DIR-620 (F1) (firmware D-Link v2.0.8 / bootloader Ralink UBoot Version: 4.1.1.0)
*Bootloader (uboot) from firmware 2.5.22
*Uboot alternative - Breed - Advanced bootloader for the DIR-620 (F1). Link to the article with description and features on HAK.RUhere.
Attached ImageGPL code: DIR-620 F1 FW v2.0.8 (firmware sources)
---AuditG1---
- = Firmware from D-Link = -
*Firmware 2.5.10
*Firmware 2.5.11
*Firmware 2.5.14
*Firmware 2.5.15
*Firmware 2.5.16
*Firmware 2.5.18
*Firmware 2.5.19
*Firmware 2.5.20
*Firmware 3.0.0 (06/20/2017)
*Firmware 3.0.0 (09/26/2017)
*Current nightly firmware 3.0.0

- = OpenWRT firmware = -
*Build OpenWrt (Chaos Calmer 15.05) for G1 (without WiFi)
*OpenWrt - an alternative solution for WiFi

- = Other firmware = -
*Advanced Tomato for G1
(*tomato-K26USB-1.28.AT-RT-N5x-MIPSR2-2.8-130-VPN for those who could not download).
After the firmware, the admin panel of the router is available only via Wi-Fi.
*Tomato firmware with C1 running on G1 + settings

- = Useful = -
*G1 Information
*We are lowering the frequencies in favor of the stable operation of the router
*Software recovery of the reset button on G1 (after firmware 2.5.x)
*Dump of memory blocks DIR-620 (G1) (D-Link v2.5.10 firmware / Native bootloader)
---AuditAA1A---
- = Firmware from D-Link = -
Attached ImageFirmware 2.5.2
Attached ImageFirmware 2.5.3
*Nightly build firmware 3.0.0
*Current nightly firmware 3.0.0

- = Useful = -
*AA1A Information
*Marking of the main chips
*Dump native loader (mtd0)
---AuditGA---
- = Firmware from D-Link = -
Attached ImageFirmware 2.5.6
*Firmware 2.5.9
*Nightly build firmware 3.0.0
*Current nightly firmware 3.0.0
Information on "Night" firmware
Firmware:
Q:"What is night firmware?".
A:The formula is simple: Last release + current cumulative edits for known issues.

Q:"How is the nightie different from the release?"
A:It is necessary to understand that this is a “draft”. When a new “nightie” is being made, something is fixed or optimized in it, but this firmware (unlike the release version) did not pass the entire set of tests for internal and external compatibility. Drafts, on the other hand, are also correct. Yes, the risk of running into a glitch is higher, but "baubles and fiches" in "nightie" appear much earlier than in releases.
What to use - you choose.

Q:"Where can I get the current nightie?"
A:In the Telegram there is a bot@dlink_rubotdistributing "night" firmware on most current models.
Attached Image

Even if the bot does not distribute the firmware specifically for your model / revision, on the Telegram channelD-Link_RUThere will surely be people who can help you with your question.
Results of previous surveys
from 05/16/2016 to 09/09/2016:
Attached Image

Current changes in the header
18.02.2019- added:
*Detailed instructions for setting up a router on Entware / Vampik firmware with various types of 3G / 4G modems

Change history
14.01.2019- added:
*Information on official OpenWRT / LEDE assemblies (from RT-N14U or Omni II Kinetics) that are suitable for F1

07.10.2018- updated:
Current nightly firmware 3.0.0
*for the Internet center DIR-620 revision E1 - Version 10/02/2018
*for the Internet center DIR-620 revision F1 - Version 10/02/2018
*for the Internet center DIR-620 revision AA1A - Version 10/02/2018
*for the Internet center DIR-620 GA revision - Version 10/02/2018

04.10.2018- added:
*The ability to use one of the LAN ports as a WAN port on ZyXEL Keenetic firmware

22.08.2018- added:
*DIR-620 (E1) Dump of memory blocks (firmware D-Link v2.5.18)

20.08.2018- updated:
*DIR-620 (E1) - Actual Night Firmware 3.0.0
*DIR-620 (F1) - Actual Night Firmware 3.0.0
*DIR-620 (AA1A) - Actual Night Firmware 3.0.0
*DIR-620 (GA) - Actual Night Firmware 3.0.0

14.06.2018- added:
*DIR-620 (C1) - Firmware 2.5.15
*DIR-620 (F1) - Actual Night Firmware 3.0.0
* DIR-620 (F1) - Important information regarding the size of RAM in different batches of Internet centers DIR-620 / D / F1(before trying to change the bootloader to ASUS-ovsky)

13.06.2018- added:
*DIR-620 (D1) - Actual Night Firmware
*DIR-620 (G1) - Actual Night Firmware 3.0.0
*DIR-620 (E1) - Actual Night Firmware 3.0.0
*DIR-620 (AA1A) - Actual Night Firmware 3.0.0
*DIR-620 (GA) - Actual Night Firmware 3.0.0

06.12.2017- added:
*DIR-620 (AA1A), DIR-620 (GA), DIR-620 (E1A) - Nightly firmware build 3.0.0 from 12/06/2017

19.10.2017- added:
*DIR-620 (AA1A), DIR-620 (GA), DIR-620 (E1A) - Nightly firmware build 3.0.0 dated 10/17/2017

06.10.2017- added:
*DIR-620 (A1) - Firmware 3.0.0 (04/26/2017)

30.09.2017- added:
*DIR-620 (G1) - Firmware 3.0.0 (09/26/2017)

13.09.2017- added:
*DIR-620 (D1) - Dump of memory blocks (firmware D-Link v2.5.15 / bootloader Ralink UBoot Version: 3.5.2.0)
*DIR-620 (A1) Internet speed testing under different firmware (L2TP Beeline 60 Mb / s)

27.06.2017- added:
*Offline copy of the forumdir620.ipb.su

25.06.2017- added:
*DIR-620 (G1) - Firmware 3.0.0 (06/20/2017)

21.04.2017- added:
*DIR-620 (A1) - Firmware 2.5.16

22.03.2017- added:
*DIR-620 (A1) - Testing the speed of the WiFi connection on the latest ZyXEL Keenetic firmware
Attached ImageSetting Ethernet sync parameters (speed / duplex)
*Updated Russian translation for OpenWRT fromtrace08

19.01.2017- added:
*DIR-620 (C1), DIR-620 (D1) - Operator firmware RosTeleCom

12.01.2017- added:
*DIR-620 (A1) - Firmware 1.4.5
*Change TTL for any interface on ZyXEL Keenetic NDMSv2 firmware

18.11.2016- added:
*DIR-620 (GA) - Firmware 2.5.9

16.11.2016- added:
*DIR-620 (F1) - Detailed instructions for replacing the bootloader (u-boot) via the OpenWrt firmware

21.09.2016- added:
Attached ImageFAQ from Oleg: Frequently Asked Questions

19.09.2016- added:
*DIR-620 (F1) - Firmware from Padavan for nexx3020 and TCL-T1 routers (almost full dir-620 f1 analogs)
*DIR-620 (F1) - Uboot alternative - Breed - Advanced bootloader. Link to the article with description and features on HAK.RUhere.

09.09.2016- added:
- New poll (added a few, in my opinion, important points).

07.09.2016- added:
*DIR-620 (F1) - Software recovery of WIFI / Uboot operation from ZyXEL Keenetic Lite 2 (similar to the Omni bootloader is not recommended)
*DIR-620 (C1) - Connecting and configuring 4G modem (in RNDIS mode) on Vampik firmware

28.08.2016- added:
*DIR-620 (A1) - ZyXEL Keenetic v2.04 firmware (BFW.9) C7 (kn_ra_delta_2.04.C.7.0-9.zip)

09.08.2016- added:
Attached ImageDD-WRT Documentation (RU)
Attached ImageDD-WRT - Practical Notes

03.08.2016- added:
Attached ImageGPL code: DIR-620 F1 FW v2.0.8 (firmware sources)

30.07.2016- added:
Attached ImageOpenWrt Chaos Calmer 05/15/1 (Official site)
Attached ImageOpenWrt Wiki in Russian
Attached ImageOpenWrt Wiki (D-Link DIR-620 A1, D1 page,F1)
Attached ImageOpenWrt Chaos Calmer 15.05.1 (catalog with images, including for DIR-620 A1 and D1)
Attached ImageOpenWrt (Download Home)

26.07.2016- restored:
*DIR-620 (D1) - Archive (Firmware, Information, Different and Useful) # 2

07.07.2016- added:
*DIR-620 (F1) - firmware 1.0.18 (cameraman RosTeleCom)
*DIR-620 (F1) - bootloader (uboot) from firmware 2.5.22

05.07.2016- added:
Attached ImageExploring OpenWRT: What is the difference between imagesuImageandsysupgrade
Attached ImageWi-Fi: unobvious nuances (for example, home network)

04.07.2016- added:
*DIR-620 (F1) - dump of memory blocks
*DIR-620 (G1) - dump of memory blocks

03.07.2016- added:
*DIR-620 (E1) - firmware 2.5.18

19.06.2016- added:
*DIR-620 (D1) - firmware OpenWRT (15.05.1) USB2 Fixed from123serge123

11.06.2016- added:
*DIR-620 (GA) - GA revision materials ("gigabit barrel")

28.05.2016- added:
*, *DIR-620 (AA1A) - Materials on revision AA1A ("white barrel")

27.05.2016- added:
*Installation instructions for Optware on Tomato firmware

18.05.2016- added:
*DIR-620 (A1), DIR-620 (F1) - instructions for installing Entware-ng on ZyXEL Keenetic NDMS v2 firmware
*DIR-620 (F1) - ZyXEL Keenetic Omni II Firmware v2.05 (AAUS.2) B5

17.05.2016- added:
- Instructions from the official site

16.05.2016- added:
- Poll "What revision of DIR-620 are you using?",
- User post count

For questions regarding the operation of native internet cent firmware, you can also refer toD-Link employeehere on the forumor through a group in the Telegram.


Post has been edited_Danila_Master_ - 18.02.19, 13:08
gendelf13
Message#2
25.03.13, 13:55
a guest
*
[offline]

Group: Users
Messages 5
Check in: 10.12.12

Reputation:-  0  +

help set up dir 620 D1 firmware 1.3.7 and usb modem MF 100 beeline.
like everything set up, the modem sees, there is no connection to the Internet, and the modem throws it out after a minute and does not see until a full reboot.
shoveled dofiga information but no sense. Who set up reply!

Post has been editedgendelf13 - 25.03.13, 14:00
karasjr
Message#3
29.03.13, 14:00
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 07.02.12
Asus ZenFone 2 Laser ZE500KL

Reputation:-  0  +

The people, there is a device under the code name Dlink Dir-620 / D1. Faced such a problem. I can not find the firmware with LTE support for the Yota modem. I searched for a long time, I read a lot, but I did not find an intelligible link to the firmware. If anyone has, pliz, throw off here or in a personal. Thanks a lot =)
byhapun
Message#4
11.04.13, 14:05
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 235
Check in: 18.12.11
Xiaomi Redmi 4X 3/32

Reputation:-  26  +

karasjrA new firmware version 1.3.10 has appeared on the office. Can it be added?

Post has been editedbyhapun - 11.04.13, 14:07
gendelf13
Message#5
18.04.13, 06:34
a guest
*
[offline]

Group: Users
Messages 5
Check in: 10.12.12

Reputation:-  0  +

dir 620 d1 does not see the E173 modem, due to firmware 1.3.10, first everything works fine after the firmware, but if you restart EVERYTHING as if it does not know it. rollback does not help ....
karasjr
Message#6
20.04.13, 21:18
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 07.02.12
Asus ZenFone 2 Laser ZE500KL

Reputation:-  0  +

Karasjr, A new firmware 1.3.10 has appeared on the office. Can it be added?


Unfortunately, these guys were too lazy to support LTE = for it (will there be any more suggestions? Who tried to sew the Zixel firmware?
rtmx
Message#7
24.04.13, 23:41
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

Karasjr @ 03/29/2013, 3:00 PM*
The people, there is a device under the code name Dlink Dir-620 / D1. Faced such a problem.
I can not find firmware with LTE support for the Yota modem. I was searching for a long time, I read a lot,
But I did not find an intelligible link to the firmware.

Configuring the router for work in the network Yota LTE
Configuring the router for work in the Megafon and MTS LTE networks

http://vampik.ru/2012/08/: rolleyes:

Test version of firmware for D-Link DIR-620rev.C1

http://vampik.ru/wl500g/rtn/5010/DIR620C1-3.0.5-r5010M.trx

Beginning withr4993, available test night firmware builds forD-Link DIR-620 rev.C1.
The transition from the native firmware is carried out by a simple firmware via the web interface.

Technical characteristics of the prototype router:
CPU: Broadcom BCM5358UB0 (530 MHz)
RAM: EtronTech EM6AB160TSD-5G (64 MB)
Flash: Macronix MX25L6406EM2I-12G (8 MB)


http://vampik.ru/2013/04/02/testovaya-vers...dir-620-rev-c1/ ;)
byhapun
Message#8
25.04.13, 07:13
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 235
Check in: 18.12.11
Xiaomi Redmi 4X 3/32

Reputation:-  26    +

rtmxneed for D-Link DIR-620rev.D1and not D-Link DIR-620rev.C1
rtmx
Message#9
27.04.13, 14:44
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

rtmx, needed for D-Link DIR-620 rev.D1, not D-Link DIR-620 rev.C1

Well, there were also firmware for D-Link DIR-620 rev.A1;) And for rev.D1 you need to build to order: blush:

So, firmware for D-LinkDIR-620 A1http://yadi.sk/d/teHZf2DC1tKre
Corrected version for this platform:http://yadi.sk/d/MDP8nZC41v_xe

Attention! This firmware is only for those who have openwrt in it. It is impossible to upload it with native firmware !!!!!
Firmware for a direct transition from native to mine today or tomorrow will be posted by Comrade Rusink.
Firmware for other routers can ask in the LAN. You must tell the model and hardware version of your router.
I repeat once again, you are flashing your piece of iron at your own peril and risk, I am not responsible.

So, features: works in CDC mode with many Huawei modems, includingE392, E398, E3276. SupportsLU150andLU156.
Username / password root / root, IP 192.168.1.1. Out of the box is registered APN Yota.
After changing the APN and other settings related to 3G / 4G, reboot the router from the webmord, otherwise the changes will not be applied.

Spread OpenWRT firmware for routersDIR-620 A1to work with Huawei E392 / E3276 modems in CDC / NDIS mode (network card).
I have tested and packaged it for uploading through the web interface of the native Dlinka firmware.http://yadi.sk/d/TQnFHAY01tNJK
For firmware from the web interface, it is necessary that the router be flashed with a native firmware not older than the DIR_620-1.2. ** version.
If you have firmware 1.3.0 and later, you must first roll back to version DIR_620-1.2.102-20110518

http://www.gsmforum.ru/threads/153711-Huaw...BD%D0%BE/page41: rolleyes:
rtmx
Message#10
30.04.13, 05:35
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

wersal256
Message#11
07.05.13, 15:56
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 116
Check in: 27.01.13
LeEco Le Pro 3 Elite X722

Reputation:-  0  +

Explain someone the difference in revisions and what exactly should I buy?
wersal256
Message#12
08.05.13, 10:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 116
Check in: 27.01.13
LeEco Le Pro 3 Elite X722

Reputation:-  0  +

Correct if I am wrong - revisions:
A - old iron but you can change into zyuksel
D - new iron but not changed in zyuksel
C - differs in percents from Broadcom, but not Railink (iron roar C1 - dd-vrt) + There is a chance to get a device with 64 MB of RAM, but no one guarantees work over 32 MB.

Interested in - are there any advantages of iron roar. From from roar. D other than hypothetical?
NORMAL Support with third-party firmware is only a roar. D.firmware roar C1 - dd-vrt

Post has been editedwersal256 - 08.05.13, 10:43
nimrod_666
Message#13
11.05.13, 16:18
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 26.06.12
Palm tungsten c

Reputation:-  0  +

Good day.
Tell me, can the device (rev.D1) work with e392 in 3g mode?
Thank.

Post has been editednimrod_666 - 11.05.13, 16:18
rtmx
Message#14
12.05.13, 01:10
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

Explain someone the difference in revisions and what exactly should I buy?

http://wikidevi.com/w/index.php?title=D-Link_DIR-620_rev_C1No need: D

Dylink is such a hole: beee:http://forum.ixbt.com/topic.cgi?id=14 sports4962-26

nimrod_666 @ 05/11/2013, 17:18*
Tell me, can the device (rev.D1) work with e392 in 3g mode?

Maybe in 3G, and in 4G: yes2:http://forum.ixbt.com/topic.cgi?id=16:4292970-44

Post has been editedrtmx - 12.05.13, 01:15
Messi512
Message#15
13.05.13, 10:23
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 81
Check in: 21.01.13

Reputation:-  0  +

on which firmware dir 620 will work with the sierra u595 modem?
katbert
Message#16
14.05.13, 16:36
Visitor
**
[offline]

Group: Active users
Messages 24
Check in: 03.01.06
Xiaomi Mi 5

Reputation:-  1  +

People, can someone tell me the direction of solving the following problem:
There is a dir 620 router, altered in Zyxel Keenetic (firmware deadc0de V1.00 (BFW.3) D0 from 21-Jun-2011). And there is a 4G modem from Megaphone (M100-1), which dir does not want to see. :(
Who can yuzat such sheaf and came across such rake? I would appreciate a hint!
rtmx
Message#17
15.05.13, 00:39
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

People, can someone tell me the direction of solving the following problem:
There is a dir 620 router, altered in Zyxel Keenetic (firmware deadc0de V1.00 (BFW.3) D0 from21-Jun-2011).
And there is a 4G modem from Megaphone (M100-1), which dir does not want to see. :(
Who can yuzat such sheaf and came across such rake? I would appreciate a hint!

So this is the old firmware, then these modems have not yet been: D

You will need to add support thereQMI in mode Rndis :: blush:
{QMI_FIXED_INTF (0x0408, 0xea42, 4)}, / * Yota / Megafon M100-1 * /

http://www.spinics.net/lists/netdev/msg226045.html

In the new alternative firmware fromMcMCC v1.10 (03/21/13 )
forZyXELSupport for new 3G / LTE modems has already been added:: rolleyes:
  • - Huawei E3276 (Megaphone M150-1)
  • - 4G Megaphone / MTSM100-1 and M150-1
  • - Yota WLTUBA-107 (CDC-Ethernet mode)
http://l10n.ndl.ru/firmwares/NDMSv1/210320...utf8_130321.txt

Well, everything should work on the Rusink OpenWRT firmware for DIR-620-A1:: yes2:
openwrt-ramips-rt305x-dir-620-a1-squashfs-sysupgrade_4G_uqmi-Rusink-logo

Messi512 @ 05.13.2013, 11:23*
on which firmware dir 620 will work with the sierra u595 modem?

Watching what revision, read the topic from the very beginning:
https://sat-forum.info/index.php/topic,9318.0.html ;)
ZigelMEN
Message#18
15.05.13, 11:49
a guest
*
[offline]

Group: Users
Messages 1
Check in: 09.05.12
MegaFon V9 +

Reputation:-  0    +

So I can not figure it out: the store has 2 Dir 620 - D-Link DIR-620 / S / C1 and D-Link DIR-620 / B / D1. According to the above
wersal256 @ 05/05/2013, 11:12*
A - old iron but you can change into zyuksel
D - new iron but not changed in zyuksel
C - differs by percents from Broadcom, but not Railink (iron roar. C1 - dd-vrt) + there is a chance to get a device with 64 MB of RAM, but no one guarantees work over 32 MB.

What do the letters S & B mean? Which one is better to take?
P.S. the router requires the organization of the home network (router-laptop-media player) and the connection of a hard disk with additional power to it.
Will it work for these purposes or see something else?
Thanks in advance for your help.
rtmx
Message#19
15.05.13, 12:37
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

ZigelMEN @ 05/15/2013, 12:49*
So I can not figure it out: the store has 2 Dir 620 - D-Link DIR-620 / S / C1 and D-Link DIR-620 / B / D1.
Which one is better to take? Will it work for these purposes or see something else?

DIR-620 C1with firmwarehttp://vampik.ru/2013/04/02/testovaya-vers...dir-620-rev-c1/: yes2:
katbert
Message#20
15.05.13, 17:39
Visitor
**
[offline]

Group: Active users
Messages 24
Check in: 03.01.06
Xiaomi Mi 5

Reputation:-  1  +

So this is the old firmware, then these modems have not yet been


Yes, this is understandable ...) it just worked fine with 3G modems, I didn’t touch it. and now I really want a normal speed on LTE, but the toad is stifling a new router to buy. So I'm looking for a new firmware ..)

You will need to add QMI support in RNDIS mode:
Code
{QMI_FIXED_INTF (0x0408, 0xea42, 4)}, / * Yota / Megafon M100-1 * /
http://www.spinics.net/lists/netdev/msg226045.html


Alas, I'm in this business noob. :( if I clean it up completely - of course I’ll sit down to figure it out, but given that the experience grows in direct proportion to the equipment that is out of service - you still have to buy a new router.)))

In the new alternative firmware from McMCC v1.10 (21/03/13)
Support for new 3G / LTE modems has been added for ZyXEL:
- Huawei E3276 (Megaphone M150-1)
- 4G Megaphone / MTS M100-1 and M150-1
- Yota WLTUBA-107 (CDC-Ethernet mode)
http://l10n.ndl.ru/firmwares/NDMSv1/210320...utf8_130321.txt


Yes, thanks, I saw. But this firmware is purely under zyxel. and I have all the same Dir pereshito in Zyxel. Not sure if these firmwares will work ...

Well, everything should work on the Rusink OpenWRT firmware for the DIR-620-A1:
openwrt-ramips-rt305x-dir-620-a1-squashfs-sysupgrade_4G_uqmi-Rusink-logo


The fact is that there he writes that "I assembled a new version for the DIR-620-A1 with support for 4G LTE modems in CDC / NDIS mode (as a network card)." And the M100 does not work as a network card, but as a normal modem. For the sake of experiment, you can, of course, but you want specifics, to be honest ..: blush:

But thanks anyway for the answer! If no one confirms the performance of these firmware - we will act by trial and error. :)
rtmx
Message#21
16.05.13, 23:50
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 29.12.12
Palm m100

Reputation:-  6  +

Katbert @ 05/15/2013, 18:39*
The fact is that there he writes that "I assembled a new version for the DIR-620-A1 with support for 4G LTE modems in CDC / NDIS mode (as a network card)."
And the M100 does not work as a network card, but as a normal modem.. For the sake of experiment, you can pour, of course, but you want specifics, to be honest ..

The MegaFon M100-1 modem works on routers and in QMI (RNDIS) mode: yes2:
MegaFon 4G Modem "Megafon M100-1" (Post # 21051591) ;)
D-Link
 

439 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/28/19 21:56