Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
DNS S4504 - Firmware |
Message#22 23.10.13, 10:58 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 71 Check in: 12.12.12 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 10 | Use only for good purposes, and not for the stopping of stolen phones :) Instructions for changing IMEI using QPST (Qualcomm Product Support Tools): 1) Install QPST 2) Connect the phone (normally turned on) to the computer and make sure that the drivers are installed and the Qualcomm Diagnostic COM port is visible in the computer devices. 3) Launch the QPST Configuration and, on the Ports tab, add to the list a COM port with a number that is “visible” in the computer’s devices as “Qualcomm Diagnostic” 4) From the QPST Configuration menu, select Start Clients ->Software Download 5) In the running QPST Software Download, select the Backup tab, set the qcn file name to save the current phone settings. 6) Click Start, backup goes. 7) Check that the size of the resulting file>144 KB (if less than 100K, then the second IMEI did not get into the backup ....) 8) Open the saved HEX qcn file with the editor and look for both IMEI in it using this algorithm (as an example) Original (current IMEI) displayed for example by * # 06 # 123456789012345 divide 2 digits from the end and add "a" ahead a1 23 45 67 89 01 23 45 swap numbers in pairs 1a 32 54 76 98 10 32 54 Get the HEX string that you want to search in the qcn file 9) Change the found HEX string to the required IMEI (to which we get the replacement according to the above written algorithm) For example, you need to replace with 987654321098765 Then a9 87 65 43 21 09 87 65 Permutation 9a 78 56 34 12 90 78 56 Here it needs to be replaced found in the file 1a 32 54 76 98 10 32 54 Make a replacement for both IMEI if needed. 10) Save the modified qcn file 11) In QPST Software Download, select the Restore tab - there is a modified qcn file in it and click Start. 12) Reboot the phone. Everything. I could not do it myself, because the computer does not release the COM ports. Write down how you will try. Attached files qpst.zip(7.85 MB) Post has been editedwd1993 - 23.10.13, 11:20 |
Message#23 25.10.13, 09:37 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 94 Check in: 18.06.13 HTC One M7 Reputation: 2 | Use only for good purposes, and not for the stopping of stolen phones :) Instructions for changing IMEI using QPST (Qualcomm Product Support Tools): 1) Install QPST 2) Connect the phone (normally turned on) to the computer and make sure that the drivers are installed and the Qualcomm Diagnostic COM port is visible in the computer devices. 3) Launch the QPST Configuration and, on the Ports tab, add to the list a COM port with a number that is “visible” in the computer’s devices as “Qualcomm Diagnostic” 4) From the QPST Configuration menu, select Start Clients ->Software Download 5) In the running QPST Software Download, select the Backup tab, set the qcn file name to save the current phone settings. 6) Click Start, backup goes. 7) Check that the size of the resulting file>144 KB (if less than 100K, then the second IMEI did not get into the backup ....) 8) Open the saved HEX qcn file with the editor and look for both IMEI in it using this algorithm (as an example) Original (current IMEI) displayed for example by * # 06 # 123456789012345 divide 2 digits from the end and add "a" ahead a1 23 45 67 89 01 23 45 swap numbers in pairs 1a 32 54 76 98 10 32 54 Get the HEX string that you want to search in the qcn file 9) Change the found HEX string to the required IMEI (to which we get the replacement according to the above written algorithm) For example, you need to replace with 987654321098765 Then a9 87 65 43 21 09 87 65 Permutation 9a 78 56 34 12 90 78 56 Here it needs to be replaced found in the file 1a 32 54 76 98 10 32 54 Make a replacement for both IMEI if needed. 10) Save the modified qcn file 11) In QPST Software Download, select the Restore tab - there is a modified qcn file in it and click Start. 12) Reboot the phone. Everything. I could not do it myself, because the computer does not release the COM ports. Write down how you will try. Post has been editedshallkIll - 31.10.13, 08:13 Reason for editing: Excessive quoting removed under spoiler |
Message#24 26.10.13, 12:49 | |
Visitor [offline] Group: Users Messages 10 Check in: 24.11.12 DNS S4504 Reputation: 0 | |
Message#25 26.10.13, 21:05 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 94 Check in: 18.06.13 HTC One M7 Reputation: 2 | |
Message#26 28.10.13, 10:16 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 71 Check in: 12.12.12 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 10 | keks1434,In general, the phone does not connect to the computer, all virtual com ports are busy |
Message#27 28.10.13, 16:39 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 94 Check in: 18.06.13 HTC One M7 Reputation: 2 | |
Message#28 22.11.13, 17:13 | |
Visitor [offline] Group: Users Messages 13 Check in: 16.07.13 Fly Energie IQ440 Reputation: 0 | For what on a site dns laid out a tulza for firmware if the firmware is sewn from a memory card ??? |
Message#29 24.11.13, 13:00 | |
a guest [offline] Group: Users Messages 2 Check in: 20.04.09 DNS S4504 Reputation: 0 | I tried to put this factory firmware .. I did everything as I should, but in the end I wrote "E: signature verification failed Installation aborted. " What's wrong? |
Message#30 02.12.13, 13:49 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 520 Check in: 18.03.10 Samsung Galaxy Note 5 SM-N920F Reputation: 31 | AntoXep, You probably put it through CWM. And it is necessary through Original Recovery. Or did you install the official firmware but before that you pulled it out of the archive -------------------- Android 8.0 |
Message#31 19.12.13, 14:42 | |
Not burning [online] Group: Friendssavagemessiahzine.com Messages 1648 Check in: 22.10.12 Xiaomi Redmi S2 Reputation: 123 | NikSor Spark Firmware Attention! Everything that you do - you do at your own peril and risk! I am not responsible for the actions of users, I do not bear responsibility! Warranty for these actions disappears. More stable firmware for Highscreen Sparkand his clones(it is the DNS S4504)! Based on firmware: from Oleg.E FPS in games: 5.5 - 6.9. RAM is free: 150 - 200 mb. (Screen attached) Screen with RAM What's new / added. 1) Sound Driver from Beats Audio 2) Butanimation when turned on and off from HTC ONE 3) Clean Master 4) Root rights 3) Convenient Picsart photo editor 4) QiuckPic instead of standard Galeria 5) Beautiful Terra Music player, instead of stock player. Terra Music-perfectly combines with Beats Audio + a good desktop widget 6) Notification - like on the Samsung Galaxy (whistle) - called "samsung" 7) Ringtone call, like on Iphone - called "Apple Phone Ringtone" 8) Google Apps to a minimum. What does not work * * Installation The firmware is installed via CWM Recovery with all WIPE ... What would be more RAM: throw off the CleanMaster widget on the desktop and periodically clear the RAM. Firmware authorniksor21 Updated version Porting firmware involvedVladimirs77 Post has been editedST3R - 27.12.13, 20:36 Reason for editing: Added screenshots -------------------- Undead unworthy to become ashes. |
Message#32 22.12.13, 18:44 | |
Not burning [online] Group: Friendssavagemessiahzine.com Messages 1648 Check in: 22.10.12 Xiaomi Redmi S2 Reputation: 123 | |
Message#33 23.12.13, 19:09 | |
Developer [online] Group: Friendssavagemessiahzine.com Messages 4545 Check in: 04.02.12 Xiaomi Redmi 3S Reputation: 2017 | I could not do it myself, because the computer does not release the COM ports. Write down how you will try. This instruction will not work, the version of QPST is not correct, your version is not able to backup IMEI -------------------- |
Message#34 23.12.13, 21:01 | |
Not burning [online] Group: Friendssavagemessiahzine.com Messages 1648 Check in: 22.10.12 Xiaomi Redmi S2 Reputation: 123 | |
Message#35 23.12.13, 22:31 | |
Visitor [offline] Group: Users Messages 13 Check in: 18.08.12 Reputation: 1 | Tell me through what to flash a new firmware? |
Message#36 24.12.13, 15:52 | |
a guest [offline] Group: Users Messages 7 Check in: 24.12.13 DNS S4504 Reputation: 0 | And for all CWM does not do wipe and rebuilds when restoring backup? |
Message#37 24.12.13, 15:58 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2004 Check in: 26.01.07 Huawei P20 Lite ANE-LX1 Reputation: 74 | |
Message#38 24.12.13, 15:59 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 520 Check in: 18.03.10 Samsung Galaxy Note 5 SM-N920F Reputation: 31 | Only you. Exam here I will pass and I will also port the firmware or start with 0. I have not decided yet -------------------- Android 8.0 |
Message#39 24.12.13, 16:03 | |
Not burning [online] Group: Friendssavagemessiahzine.com Messages 1648 Check in: 22.10.12 Xiaomi Redmi S2 Reputation: 123 | Doroshny_Kirpich, As for departures, I also have, but the wipe, just go on either with the buttons or with the buttons. Posted on 12/24/2013 16:03: valerag71, Interface, RAM, well, in general, I like it more. -------------------- Undead unworthy to become ashes. |
Message#40 25.12.13, 01:28 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2004 Check in: 26.01.07 Huawei P20 Lite ANE-LX1 Reputation: 74 | |
Message#41 25.12.13, 06:26 | |
Visitor [offline] Group: Users Messages 10 Check in: 24.11.12 DNS S4504 Reputation: 0 | * Camera (Corrected) * Wi-fi (fixed) I put the test so far that the radio does not work, in no way does it want to play the sound in the headphones on the speaker playing .. Annoyingly (I like to listen to the radio) ... If it is not difficult to correct the radio) |
mobile version | Now: 04/18/19, 15:15 |