JXD S7300 - Firmware (OS Android 4.1-4.2)
(under reputation) and let us know who helped you, whom to put the "+".
for posting evaluation.
,
Ivan 83, Memory falls off, the kernel goes to sleep and does not wake up. I do not remember a single case of a stable and trouble-free operation of this tablet.
With Ruth everything is good in any firmware) but he does not help
I hope I pass by a problem with the blade and the other, about 7100 also wrote something similar.
If anything, then I take "baby" the replacement.
If anything, then I take "baby" the replacement.
Brought the device, the latter for the whole yamarket took :)
Surprisingly, even the battery alive and half-charged.
Nakata firmware as advised.
Then another f-droid, software pack and opkg to via ssh in devayse dig. I have not found where to attach it to autostart.
While the fact than not pleased:
- the first launcher to put it mildly not familiar
- in VLC video hrenovato playing those 1080p, it does not pull in h.264, try later MX Player with its hardware codecs
- OpenGL ES2 in VLC does not work, but maybe just an old chip and it is not there
- strange to say the logo and animation at startup :)
The rest is not bad.
Pleased that sort of mikroyuzbi charged, though slowly. This eliminates the problem with bystrolomayuschimsya standard circular connector, for I have a cable with a magnetic head, so break the connector is not possible.
100 just glad that it was not until Samsung put opkg, and then they're like dimmed protection.
Inside I am not yet watched, I hasten to attach to the copper heat sink percent, if there is enough room, and can be somewhere Conder powered hang.
There are still cleaning out all unnecessary stuff such as Google's and the fact that there firmware author stuffed.
To replace the launcher and hardware modes have some experience of the owners?
Surprisingly, even the battery alive and half-charged.
Nakata firmware as advised.
Then another f-droid, software pack and opkg to via ssh in devayse dig. I have not found where to attach it to autostart.
While the fact than not pleased:
- the first launcher to put it mildly not familiar
- in VLC video hrenovato playing those 1080p, it does not pull in h.264, try later MX Player with its hardware codecs
- OpenGL ES2 in VLC does not work, but maybe just an old chip and it is not there
- strange to say the logo and animation at startup :)
The rest is not bad.
Pleased that sort of mikroyuzbi charged, though slowly. This eliminates the problem with bystrolomayuschimsya standard circular connector, for I have a cable with a magnetic head, so break the connector is not possible.
100 just glad that it was not until Samsung put opkg, and then they're like dimmed protection.
Inside I am not yet watched, I hasten to attach to the copper heat sink percent, if there is enough room, and can be somewhere Conder powered hang.
There are still cleaning out all unnecessary stuff such as Google's and the fact that there firmware author stuffed.
To replace the launcher and hardware modes have some experience of the owners?
nilefirst @ 20.04.18, 10:27
Nilerom firmware with kernel 3.0.50
1. /system/etc/init.d/03tuner not performed at all.
You can start from:
/ System / bin / alsa_ctl
/ System / bin / sysinit
/system/etc/install-recovery.sh
/ System / bin / sysinit
/system/etc/install-recovery.sh
Fixed creating /system/etc/install-recovery.sh with the contents of the file:
#! / system / bin / sh
for i in $ (/ system / xbin / find /system/etc/init.d/ -type f -perm '-u + x' -name '*' | sort $ ORDER);
do
# Fork subprocess.
$ i
done
for i in $ (/ system / xbin / find /system/etc/init.d/ -type f -perm '-u + x' -name '*' | sort $ ORDER);
do
# Fork subprocess.
$ i
done
2. If you run your hands do not all apply:
./03tuner[48]: can not create / sys / kernel / debug / sched_features: No such file or directory
./03tuner[49]: can not create / sys / kernel / debug / sched_features: No such file or directory
./03tuner[50]: can not create / sys / kernel / debug / sched_features: No such file or directory
./03tuner[49]: can not create / sys / kernel / debug / sched_features: No such file or directory
./03tuner[50]: can not create / sys / kernel / debug / sched_features: No such file or directory
3. launcher a lot of climbing to the Chinese, it was necessary to add to the hosts:
0.0.0.0 3g.cn
0.0.0.0 goupdate.3g.cn
0.0.0.0 gopromotion.3g.cn
0.0.0.0 launchermsg.3g.cn
0.0.0.0 imupdate.3g.cn
0.0.0.0 gostoreinter.3g.cn
0.0.0.0 guiwallpaper.goforandroid.com
0.0.0.0 lightapp.goforandroid.com
0.0.0.0 goupdate.3g.cn
0.0.0.0 gopromotion.3g.cn
0.0.0.0 launchermsg.3g.cn
0.0.0.0 imupdate.3g.cn
0.0.0.0 gostoreinter.3g.cn
0.0.0.0 guiwallpaper.goforandroid.com
0.0.0.0 lightapp.goforandroid.com
4.
0.0.0.0 bottle.quettra.com
does not work, a launcher for this than that he did not write special yuzaet hosts and dns has to resolve through force
5. Why is it no longer created
because of this in the settings if you go flying in memory or applications, and other applications, too, it became bad happened.
Fixed thrust
in the startup scripts.
6. VLC why it pours 1080p video, many or even can not show.
Built-in player pulls them often but it does not see the track.
Xs what to replace.
/ storage / sdcard0
/ storage / sdcard1
/ storage / sdcard1
because of this in the settings if you go flying in memory or applications, and other applications, too, it became bad happened.
Fixed thrust
/ System / bin / mount -o rw, remount /
mkdir -p / storage / sdcard0
mkdir -p / storage / sdcard1
/ System / bin / mount -o ro, remount /
mkdir -p / storage / sdcard0
mkdir -p / storage / sdcard1
/ System / bin / mount -o ro, remount /
in the startup scripts.
6. VLC why it pours 1080p video, many or even can not show.
Built-in player pulls them often but it does not see the track.
Xs what to replace.
As long as everything works without problems.
Side shift somewhere got lost and one speaker slightly wheezing, but this garbage :)
Player - MX Player found an old 7.1.35 with him almost all the rules goes, only one video sound doubles apparently softvarny hardware and codecs for some reason again driven sound. But the load near zero percent and 1080 quietly.
I also took settings.apk of runoff is now on the main screen only in a row icons for some reason, the rest disappears after reboot, but it's the little things, even to understand not hunting.
Side shift somewhere got lost and one speaker slightly wheezing, but this garbage :)
Player - MX Player found an old 7.1.35 with him almost all the rules goes, only one video sound doubles apparently softvarny hardware and codecs for some reason again driven sound. But the load near zero percent and 1080 quietly.
I also took settings.apk of runoff is now on the main screen only in a row icons for some reason, the rest disappears after reboot, but it's the little things, even to understand not hunting.
nilefirst URGENT! : Help:: help:: help:
Regarding miracle script for SD cards.JXD S7300 - Firmware (OS Android 4.1-4.2) (nilefirst # 72581276 Post)
After this wonderful utility by pressing buttons (as in instructions) and I do check was specified disk with a USB flash drive.
I flew off the system drive on a computer. The system is not loaded, when you try to restore regular methods (with the disc DVD) says "Disk is locked". So traditionally, a screw inserted into another PC to format offers.
What to do???
System is needed and the data on the disk is also important. : Help:: help:
P.S.
I successfully sewn previously by other methods, the devil pulled apply this "China Innovation"
P.P.S. The disc became RAW, rakaverom pulled desired folders and files under format. Take care of yourself and your discs!
Post has been editedvetroff_new - 17.12.18, 20:47
It is possible to flash any gadgets through otg through
Fastboot
Use rockchip, amlogic, mtk, atm and other flash drivers (through modified wine exawindows)
Create bootable sdcard without pc. : thank_you:
For questions in lichku
Fastboot
Use rockchip, amlogic, mtk, atm and other flash drivers (through modified wine exawindows)
Create bootable sdcard without pc. : thank_you:
For questions in lichku
AndVaider, Once you're on the spammer like. Give a link to the theme or message, and then to the PM a lot of smart ...
Post has been editedDr_Hacks - 26.02.19, 13:36
Said the PM has the desire to write about the grain of which he gave to) have an idea how it all to gather and akulturit ideally put in pm without violating copyright write
Want normally that would be a DIY) Not working gyroscope and kalechny wifi in 4.3.1 bored and transparent interface hard because xposed and gravity fed up. Legacy seems to be nothing, but not visually gone ... So I decided to collect that normal, especially since in addition to the Legacy and drain firmware rules there, especially looking at the misery nilerom ... there from one instruction horrified and descriptions, with smells of light shizoy of being a genius)
OPTIMUS PRIME ROM
Firmware working without bugs, ready to use immediately.
- Ported with DNS Thanatos
- Deodexed and zipaligned;
- New battery with 1% increments;
- Changed bootanimation;
- Init.d support (you can post your own scripts)
- New core:
* The core stock, but modified.
- Support Uinput, CIFS / NFS and NTFS are fully supported.
- Support GPS USB.
- Modified part of the graphics;
- Integrated status and nav bar;
- Added Startup to the settings (now there is no need to install a third-party autorun application);
- Added G-sensor Setup in the screen settings (you can also use it as a level);
- Added extended reboot menu (normal, fast, recovery);
- Removed signature verification and application integrity;
- Added patches to improve the smoothness of the system, saving battery;
- Added a bunch of different tweaks;
- Loader native EXEQ ACE, you can now use the 1.2 GHz band.
- application to embed: Root explorer, System app remover, Paragon HFS & NTFS, Shareit, Nova Launcher Prime + Launcher2 mod
- Added a button in the nav bar, which opens the screen (with one press; with a long tap, displays the Power menu);
- Added to the nav bar, the Internet speed is modified SystemUI, without unnecessary software (only appears when the Internet);
- Modified stock Launcher2.apk.
-Replace all stock sounds KitKat + Transformers.
-Vyrezan entire Google junk and just trash, with updated emulators, and has everything you need
-Working CWM which is stitched, it mounts adequately both memory and stores a backup of both domestic and external memory.
-Superuser removed in return stitched SuperSu
It seems everything, well, maybe even some little thing I forgot!
INSTALLATION
The archive has everything you need to flash when the machine is alive and everything you need if kirpicheg.
Unpack archive
At stake is put: aml script, ulmage_recovery, optimusrom.zip, cwm.zip, supersu.zip
Insert the card into the machine is turned off
Enable with + and clamped Inc.
After cleaning the script cwm choose instal udate from sdcard
Optimus
Supersu
Advanced
Reboot recovery (before confirmation gat map)
Once in recovery do stock
Wipe data
Wipe media
Reboot
Boot to the desktop
insert the card
Remove the card aml autocript (cleaning up the script)
switch
Hold the + and On
We fall into the cwm
Install
Cwm.zip
Wipe data
Mount / storage
Format emmc
Reboot system
The card is no longer needed (we stitched working cwm)
ENJOY
https: //drive.google.c...Gi-J/view usp = drivesdk?
P.S. apkashka that inside if there is any gadget with Ruth, use on health. Through this program do zagiuzochnuyu map one brick was before the firmware (install, run, vyborat u-boot, write, by setting android formatnut, throw a flash files)
It's time to forget about the troubles with creating bootable computer) create them without a PC at all)
Post has been editedGood light - 11.03.19, 22:33
OPTIMUS PRIME ROM
Firmware working without bugs, ready to use immediately.
- Ported with DNS Thanatos
- Deodexed and zipaligned;
- New battery with 1% increments;
- Changed bootanimation;
- Init.d support (you can post your own scripts)
- New core:
* The core stock, but modified.
- Support Uinput, CIFS / NFS and NTFS are fully supported.
- Support GPS USB.
- Modified part of the graphics;
- Integrated status and nav bar;
- Added Startup to the settings (now there is no need to install a third-party autorun application);
- Added G-sensor Setup in the screen settings (you can also use it as a level);
- Added extended reboot menu (normal, fast, recovery);
- Removed signature verification and application integrity;
- Added patches to improve the smoothness of the system, saving battery;
- Added a bunch of different tweaks;
- Loader native EXEQ ACE, you can now use the 1.2 GHz band.
- application to embed: Root explorer, System app remover, Paragon HFS & NTFS, Shareit, Nova Launcher Prime + Launcher2 mod
- Added a button in the nav bar, which opens the screen (with one press; with a long tap, displays the Power menu);
- Added to the nav bar, the Internet speed is modified SystemUI, without unnecessary software (only appears when the Internet);
- Modified stock Launcher2.apk.
-Replace all stock sounds KitKat + Transformers.
-Vyrezan entire Google junk and just trash, with updated emulators, and has everything you need
-Working CWM which is stitched, it mounts adequately both memory and stores a backup of both domestic and external memory.
-Superuser removed in return stitched SuperSu
It seems everything, well, maybe even some little thing I forgot!
INSTALLATION
The archive has everything you need to flash when the machine is alive and everything you need if kirpicheg.
Unpack archive
At stake is put: aml script, ulmage_recovery, optimusrom.zip, cwm.zip, supersu.zip
Insert the card into the machine is turned off
Enable with + and clamped Inc.
After cleaning the script cwm choose instal udate from sdcard
Optimus
Supersu
Advanced
Reboot recovery (before confirmation gat map)
Once in recovery do stock
Wipe data
Wipe media
Reboot
Boot to the desktop
insert the card
Remove the card aml autocript (cleaning up the script)
switch
Hold the + and On
We fall into the cwm
Install
Cwm.zip
Wipe data
Mount / storage
Format emmc
Reboot system
The card is no longer needed (we stitched working cwm)
ENJOY
https: //drive.google.c...Gi-J/view usp = drivesdk?
P.S. apkashka that inside if there is any gadget with Ruth, use on health. Through this program do zagiuzochnuyu map one brick was before the firmware (install, run, vyborat u-boot, write, by setting android formatnut, throw a flash files)
It's time to forget about the troubles with creating bootable computer) create them without a PC at all)
K
Added to the header
Attached images
 |
 |
 |
 |
 |
 |
Post has been editedGood light - 11.03.19, 22:33
niyaz84 @ 07.03.2019, 12:05
Andvaaider , It may? https: //drive.google.c..02UURLdERHaXpVQXc/edit 4.2.2 I found a bunch, but I can not 4.4.2 (
Attached images
 |
 |
 |
Post has been editedAndvaaider - 11.03.19, 19:03
I would be glad if someone will share the remains and best practices 4.4.4 try to bring to mind the omni 4.4.4 am8726mx crystian Troy
Post has been editedAndvaaider - 10.03.19, 00:56
Post has been editedAndvaaider - 10.03.19, 00:56
Hello everybody. here found a tablet in a state of brick and decided to fix it. of the signs of life was only green power indicator. Comp it determines the wood rose (Windows 10). That only did not try to do with the company, he does not give signs of life anymore. with the stick also to no avail. Disassembled, and started contacts close 5-6, 7-8. all tried, then I started back and the red light lit while charging. a couple of times in the USB-Burning-Tool could download something well, that is how I understand the memory clean (in general two checkboxes, and set them up to 100%) but it was no use, he never joined. of caps I tried almost everything. can someone that will advise where to dig
https: //drive.google.c...CMRj/view usp = drivesdk?
Optimus on kernel 3.0.50 Legacy. I advise this particular!
Posted on 11/03/2019, 12:08:
If you have at hand any android Ruth right to rock the last file.
And follow the instructions. PC is not needed.
1024x600 wallpaper set that would not seek
wallpapers.7z(7.9 MB)
Post has been editedAndvaaider - 11.03.19, 19:17
Optimus on kernel 3.0.50 Legacy. I advise this particular!
Posted on 11/03/2019, 12:08:
Ryazanoff @ 11.03.2019, 04:03
Hello everybody. here found a tablet in a state of brick and decided to fix it. of the signs of life was only green power indicator. Comp it determines the wood rose (Windows 10). That only did not try to do with the company, he does not give signs of life anymore. with the stick also to no avail. Disassembled, and started contacts close 5-6, 7-8. all tried, then I started back and the red light lit while charging. a couple of times in the USB-Burning-Tool could download something well, that is how I understand the memory clean (in general two checkboxes, and set them up to 100%) but it was no use, he never joined. of caps I tried almost everything. can someone that will advise where to dig
If you have at hand any android Ruth right to rock the last file.
And follow the instructions. PC is not needed.
 |
 |
 |
 |
1024x600 wallpaper set that would not seek
Attached files
wallpapers.7z(7.9 MB)Post has been editedAndvaaider - 11.03.19, 19:17
Andvaaider , Hello, and it is possible for more How raskirpichet console using your archive? Console I glyuknul not included, but charging to react, downloaded your file, went rekaveri flashed super su clicked on reboot, and she died on the always illuminates only the green LED.It is interesting )
Becoming AIC is in the archive and do zagruschochnuyu map below for instructions.
Becoming AIC is in the archive and do zagruschochnuyu map below for instructions.
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement