On xda presented the assembly with dual-boot xubuntu:
http://forum.xda-developers.com/showthread.php?t=2190847Here, too, it has been discussed, but in a different thread:
Menos @ 18.3.2013, 22:28
Installation and Setup Xubuntu for Dummies. Requirements: [color = black]
- An unlocked plate with a docking station.
- Computer withWindows and Fastboot .
- Straight arms.
1. Download the image
Xubuntu c site
Dev-host :
http://d-h.st/Kts (
379.32 MB )
2. Download the kernel
Xubuntu from the website
Dev-host :
http://d-h.st/fgo (8.00 MB ) 3. Unpack the archive with the image on the computer.
4. extract the image to rename
rootfs.img .
5. Create a folder
linux in tablet memory and copy to the root of the renamed image
Xubuntu .
6. Rename the downloaded kernel on
xubuntu.blob simply to reduce the number of letters.
7. Copy it to a folder
fastboot.exe and load the tablet mode "
Fastboot ".
This is done by rebooting the device c holding the power button and the "Volume down". At this stage you do not need to do anything until the boot menu appears.
When the boot menu appears, press the Volume Down key "Volume down" until then, until you select znachok "Fastboot "And then press the Volume Up" Volume up ", to put the device in the mode" Fastboot ".
8. In the console
CMD go teams "
cd "In the folder"
Fastboot ":
9. Install the kernel with the command:
fastboot.exe -i 0x0b05 flash staging xubuntu.blob
10. Restarting the tablet into "Bootloader" command:
fastboot.exe -i 0x0b05 reboot-bootloader
11. We look forward to the inclusion
Xubuntu .
[/ color]
Incidentally, in this regard, I have a question. How do I flash the kernel, if I do not have a computer with Windows? If I understand correctly, then 7-9 in this case can be replaced by the following:
7. Start any terminal emulator.
8. Enter in it the command "su", provide the terminal root.
9. Enter the command "dd if =<the path to the file>xubuntu.blob of = / dev / block / mmcblk0p4 "
And what in this case is instead of paragraph 10?