> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


873 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Fly IQ446 Magic - Firmware (OS 4.x)
Galaxy Ace ICS
Message#1
09.05.13, 20:53
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1487
Check in: 24.04.12
Xiaomi Redmi Note 5 3/32

Reputation:-  320  +

Fly IQ446 Magic - Firmware (OS 4.x)
PictureGionee GN708W, AllView P5 Quad

Description | Discussion | Purchase | Marriage | games and apps | Accessories | Modifications of software and decorations | FirmwareMIUI | Firmware (OS 4.x)

FAQ
FAQ # 1 - for official firmware
FAQ # 2
FAQ # 3
General FAQ on the firmware Fly IQ446-Magic. Read carefully!
1. What is the need for flashing?
Android is constantly evolving, and to use the new features, you must constantly monitor the new versions of your operating system and, after their release, update it. You may also want to get some features that are not available in the official firmware version of your device, or change some standard system components (interface replacement, removal and addition of applications installed on the system by default, etc.) you can flash the device modified unofficial firmware. Summarizing, we can say that a flashing is needed to obtain new additional features and eliminate errors of old versions. You can find the list of the most up-to-date firmware for your device in the section corresponding to your model.
2. What is Root access and what is it for?
Root access is access to the operating system of your smartphone with administrator rights, which can do everything. That is, without this access, you use your phone as a regular user and can not change the system resources and important settings of the operating system. In most cases, it is not needed, as many have enough available functionality, but sometimes there is a need to do something (let's say to flash the phone with unofficial firmware, install a program that needs root access, make sure that applications are installed on the SD card) You can follow the not very complicated instructions and get root access in almost 5 clicks (please note that getting root is different in each model and in some cases it is impossible to get full root access, so read the topic tatyu specifically about your model!). Most often it is needed here when:
but. Change the appearance of the OS (status bar, standard icons, a picture when the device is loaded, etc.)
b. Creating Recovery (a special subroutine that allows you to make the device firmware much more convenient and faster, also allows you to backup (save the current state) of your files to the SD card and much more, for more details, see "What is Recovery")
at. Access to the terminal (we did not forget that we have a linux system? If you don’t know what linux is and what a terminal (console) is, then this item will not be of particular interest to you)
Removing the standard software from the phone (let's say you don’t need a facebook client or google maps, you can delete it with superuser rights)
e. Installing and running software that requires high privileges (for example, programs for transferring all types of files via bluetooth, tether applications (a program for distributing the Internet from your phone to other devices, working via wi-fi and creating an access point from the device)
e. Installing programs not in the phone’s memory, but on an SD card (this function, though not completely, but already implemented in Android 2.2 and higher)
e. Flashing the device with the so-called custom firmware (firmware that has been modified by third-party developers not related to Fly)
ё. There are many other things that the ordinary user doesn’t need as such. Well, unusual users already know everything themselves.
3. What is Recovery and what is it for?
Recovery is a separate program that allows you to restore the phone, which can not boot to working condition. It is called when the system is loaded with a special key combination (usually the volume up + the on / off / lock button). Standard Recovery unfortunately does not allow flashing the phone with “custom” firmware, and also does not have the ability to make backups (current state for subsequent recovery) of programs, system and other elements.
4. What needs to be done before starting the firmware or getting root-rights for your device?
Starting the process of flashing your phone, first of all, you need to remember that this will destroy all the information stored in it. Therefore, we strongly advise everyone to backup all important files: contacts, photos, and so on.
Backup is performed on a memory card, and it is configured in the menu item “Privacy” of the phone, then “Data backup”. After making a backup and reflashing the phone, when you first start it, you will be asked to restore all the files and settings.
Also remember that all actions related to flashing are carried out with the phone at your own peril and risk. In addition, in the case of flashing the phone not in the SC, it is removed from the guarantee. However, as a rule, there are no problems. In the most extreme case, you can always make a "rollback" to the previous firmware and take the phone to warranty repair.
Before starting the firmware, make sure that the drivers and the latest version of the Smart Phone Flash Tool are installed on the computer.
5. How to make a wipe and what is it?
Wipe is a reset to the factory settings (deleting user settings). Press the volume up button and the on / off / lock button, hold until the menu appears, use the volume buttons to select wipe data / factory reset in the menu and press the on / off / lock button (the confirmation item is also selected), then wipe cache partition and press on / off / lock, upon completion of all select reboot system now ...
6. How to start menu recovery and management.
We hold down the volume up button and the on / off / lock button, hold until the menu appears.
Navigate the menu using the volume buttons, select (confirm) with the power button, return to the previous menu with the back button)
7. How to find out the firmware version?
To do this, go to Settings ->>>On the phone and look at the "Build Number" item
8. What is needed for firmware?
a) A computer with any operating system
b) Telephone and usb cable,
c) Drivers and software for flashing,
d) The firmware itself,
e) Instruction. (All instructions are given in the topic header)
e) Charged battery (minimum 50%, but preferably fully)
9. Where to get the firmware?
In the topic header.
10. Does self-flashing deprive the warranty?
No, unless the service can prove that your actions have put the device in a non-working state, this also applies to obtaining root rights ...
Usually, Fly does not remove the device from the guarantee if obtaining root rights and flashing did not lead to phone failure.
11. How to get root rights?
To get Root rights, it is enough to flash SuperSU through modified Recovery. Modified recovery can be found in the header and the instructions for installing Root are right.
12. Through which program are custom and official firmware installed?
Through Recovery custom, through the Smart Phone Flash Tool - official.
13. What should I do if the phone is scorched?
If for any reason you received a “brick” - as a result of unsuccessful firmware, turned off the lights during the firmware or just unsuccessful experiments, then just flashing the official firmware through the Smart Phone Flash Tool and rejoice.
If suddenly it did not help, then contact the service center!
14. What should I do if the ring tone flies?
On the sd card, create media / audio / ringtones and put the songs there.
If that didn't work:
Through root explorer, go to System / media / audio / ringtones, put the desired song in the folder, set the rights rw-rr-- and set it up on the call.
On the latest firmware this bug is fixed.
15. How to enter the engineering menu?
There are two ways to enter the engineering menu:
In your native diler, dial * # * # 3646633 # * # * - after dialing the last asterisk, you will immediately get into the engineering menu
Using Mobileuncle MTK Tools. Run it and go to: Engineering menu ->Engineering menu (MTK)
16. How to increase the speaker volume in any Fly iq446 firmware?
- Enter the engineering menu and set the settings in accordance with the data given below.
Call volume levels are set in Audio - LoudSpeaker - Sph
Max Vol = 150 (it is the same for the whole section)
Levels: 0 90 110 120 130 140 160 (more begins to wheeze).

Multimedia volume levels are set in Audio - LoudSpeaker - Media
Max Vol = 150 (it is the same for the whole section)
Levels: 0 80 110 130 160 180 200 (more begins to wheeze).
17. Can I flash the device if it is not 100% charged?
Yes, it is possible, but it is desirable to have at least 50%, it should be enough for the flashing time, since charging does not take place at the time of firmware recording
18. What is the latest official firmware at the moment?
- SW23 JB 4.1.2
19. What is the core of the firmware?
The kernel is part of the operating system, and it is not only Android, but also other operating systems: Windows, iOS, MacOS, and others.
And the Android kernel is practically the most important part of the operating system, which is responsible for the interaction between all the hardware and the software part of the system. The kernel consists of a set of drivers of all the hardware and memory management systems, network, security, and other basic functions of the operating system.
20. Does the FLY IQ446 have a FOTA firmware update (Firmware Over The Air)?
No, this feature is not available.
21. What is CWM?
CWM is a multifunctional program that allows you to perform most of the system manipulations with the root phone.
In fact, this is a convenient interface for working with CWM recovery from under a busy system.

CWM features>Clockworkmod>Modified Recovery (Recovery):
Installing any modified-standard-ported firmware.
Installing any fix patch patches.
- Enable USB-MS mode (to transfer data to SD from under the mode)
-Console
-Create BackUp of the entire system + programs.
- Recovery of data from the previously created BackUp "a
-Wipe - data / factory reset, cache, SD, SD: ext partitions, battery stats, rotate setting
- Layout of the SD card on linux sections. (ext, ext2, ext3, ext4 as well as SWAP!)
22. I have flashed the device, but it doesn’t load or hang on the boot screen, what should I do?
Basically, before flashing the device to a new version, you need to use system cleaning from the old firmware version called wipe, it clears all user data and system files. Firmware developers always warn you what wipe to do before flashing the device
common wipe
- wipe data / factory reset - This is the formatting of the internal partition, if after that the firmware is not installed, then your device will get into the bootloop
- wipe cache partition - This is the partition cache formatting.
If you did not perform the necessary system cleaning under the wipe tool before the firmware, then it is possible that your device will malfunction or not load at all. If you nevertheless made the necessary system cleanups, check the integrity of the firmware file using MD5 amounts (Romodels mainly spread it for reliability) and the size of the file you downloaded, you may not have completed it, check the firmware version. any additional manipulation in the recovery mode, look at the opinions of other users who tried to install this firmware, there may have been problems on certain revisions of the devices or in general for everyone, if everything is ok pop Put on again to reset the firmware to view the installation process, it must be completed stitching Install from sd card completed, if issued any error it is possible that the problem lies in the very firmware and installing it is not guaranteed on your machine or revision. Personally, I recommend that you have one version of the firmware (which is installed correctly) on the memory card for restoring the device or unsuccessful firmware, the firmware will come in handy if any is 100% installed.
23. How to remove pre-installed programs?
Root is required for this purpose.
This can be done using the program Root Explorer
Open the program
Go to / system / app
In the upper right corner we make a r / w button, after which it will be possible to change / delete system files.
Remove unnecessary software
24. When working with FlashTools, do you need a special cable or is there enough usb which is included?
Any usb cable is suitable, for example, supplied with the phone.
25. How to take a screen shot (screenshot)?
To do this, simultaneously hold down the screen lock and volume down keys.
26. How to set the rights of the letter "G"?
This means that you need to get root rights and set permissions for a file of the type rw-r - r--
Attached Image

In any manager working with root rights.
27. What are gapps?
Gapps = Gapps = Google Apps - services provided by Google include: Gmail, Google Calendar, Google Talk, Google Docs and Google Sites.
In general, these are standard Android applications that are available in most assemblies of this OS.
If in your version of Android, these same gapps are “cut out” (for example, miui, cyan, etc.), they can be downloaded and installed separately, including from the header of this topic.
It can also help solve problems in these applications on some ported firmware.
28. How to make the device support all games and applications from Market? (for example Asphalt 8)
Need ROOT and the program Root Explorer. Backup is sure to do.
Find the build.prop file in the system \ build.prop path, and find the lines:
ro.product.model = IQ446
ro.product.brand = Fly
ro.product.name = Fly
ro.product.device = Fly
ro.product.manufacturer = Fly
and replace
ro.product.model = IQ446 on ro.product.model = IQ446 Magic
ro.product.name = Fly to ro.product.name = Magic
and ro.product.device = Fly to ro.product.device = IQ446

Drivers and Utilities
The higher, the newer

Attached fileDriver + with + digital + signature + for + Win + 7.exe(4.09 MB)

Attached fileAlternative Drivers for Win7.rar(38.92 MB)

Attached fileFLY_IQ255_Drivers_x86.exe(4.59 MB)

Attached fileFLY_IQ255_Drivers_x64.exe(5.05 MB)

Firmware - SP Flash Tool
1. Attached fileSP_Flash_Tool_v3.1312.0.139.7z(3.09 MB)
- latest version
2. Attached filesp_flash_tool_v3.1308.0.1.zip(6.29 MB)
- stable version
3. Attached fileSP_Flash_Tool_v3.1304.0.119.zip(6.27 MB)
- stable version
4. Attached filesp_flash_tool_v3.1244.0.sn85.zip(5.77 MB)
- the first version that works with Scatter for IQ446
Firmware
Official firmware using SP Flash Tool
The higher, the newer

SW 24- for flashing throughFlash tool . Alternative download link SW 24
SW 24- The latest official firmware, fixed "rally" tunes.For installation via TWRP or CWM (recovery) i.e. SP Flash Tool Not needed !

������� ����� � ��������� �� ������, ����� � ��������, ������ Install zip, ������� ���� �������� � ���������� (��� ������, ���� �� ����� ������ ������ ����������� ��������, ���� ������ � ����� ����������. ���� ������ ��������� ��������, �� ����� �����������) download


SW 23
SW 22- stable work of MTS
SW 21- MTS work improved
SW 20
SW 20- for installation via TWRP (recovery)
SW 18- official
SW 18 (Edited)- Fixed some bugs, increased volume, reduced the visibility of the pink spot on the camera
SW 16
Sw 11- for installation via TWRP (recovery)
Sw 11- Fixed a bug with the launch of the "screen settings", some users were helped with the loss of communication, while moving
SW 08

Custom firmware through recovery (TWRP / CWM)
The higher, the newer
White_ART_4.4.4
KRASAVA_4.4.4_ART
Minimal UI: Flatty
Android 4.4.4 (KTU84Q)
CyanogenMod 11
SW24 mod by Alex & rK based on mod2 by zxw1
Android 4.4.4 (KTU84Q)
LeWa6_Enjoy / MIUI5_Enjoy
EMUI 3.0
MIUI7_6.1.28 from MultiROM
MIUI 7 5.10.15
MIUI 7
v1.0.0 Stable
P The firmware with Android version 4.4. + is highlighted in its color.
I draw for KitKatfrom ANDR7E
LeWaOS 6.0 by hollydenis SuperLight
WITH OLOR OS v2.1 on Android 4.4.2
M IUI 6 5.6.25
L ewaOS 6 rus updated
M IUI V5 RUS weeklyfrom stas2z
L ewaOS 5.0 rus
A ndroid Non Source Project v5
A lice Project 9.0
N exus 3
C yanotek rom
N exus 5 v2
A ndroid KK Acer E3 ultra mod
S ome Games OS 4.4.3
H TC ONE M8 (4.4.2)
L G G3
D EXP AOSP 4.4.2
A moi N828 KitKat V1.1 dated 07/18/2014
M IUI v6 Rus
E Coo os
E xlusive Update v2 (4.2.2)
K itKat 4.4.2 by Doha
A ndroid 4.4.2 Kit Kat (AOSP)
A ndroid 4.4.2 Kit Kat AOSP MOD
N exus 5 from Acer V370 with Android 4.4.3
A ndroid 4.4.2 Kit Kat (AOSP) V.2 by Dorik-xxx
A lice Project Reborn 8.3
A moi 4.4.2
A lice Project Reborn 8.2
S amsung v3
WITH yanogenMod 11
A lice Project Reborn
K itKat from Acer v370 E2
NGM Darkness v2
N anoGenMod Darkness
N extburst OS
L EWA OS V4 (VVV) by v2541_Reliz
P ureXperia Z3
G K-Mod_L-AlphaRage v.3.0 beta
F untouch OS v. 1.1
M aterialAOSP 4.2
L Style
G K-Mod_L-AlphaRage v.2.1
L ewaOS 5.1 dated 10/17/14
E xlusive Os Updated
p ort_ ZP910 _Custom v2.0
P IONEER NEO MAGIC
p ort_ ZP910_ Custom
L EWA OS V4 (4.2.1) by v2541
E xclusive OS
P ureXperia Z2 ROM v4 UPDATE
M yriad - JB 4.2.2
G alaxy s5 rom
C olor Os Rom v.2
A V5U Reborn
B AIDU OS v6
P ort pioneer
T HL-200 port
Y andex.Kit
H TC One M8 by hack ++ Patch for HTC One M8
S W 24 with mods from OPEXOBB
H TC One M7
L eWa_Black_v.4
H ybridX
L enovo P780 Rom
A ndroid 4.2.2 lite
F ly_iq446_color_V1.7is
H ike os
C yanogenMOD 10.2 v.4.3
G ravity X
N oteIII MetalBlueGoA v.4.3
4 46Color_1.6 is
E motion UI 1.6
P rojectDoge v1.0.5
N oteIII MetalBlueGoA v.4.2
M agicOS Me! ROM V3 BETA
N oteIII MetalBlueGoA v.4.1
P rojectDoge v1.0.1
N oteIII MetalBlueGoA v.4.0
L ITE ROM [4.2.1]
S uperBean- Vanilla Styled JB 4.2.2
S W 24_mod_v2
ABOUT original deodexed_SW 24
L ewaOS_5.0_17-01-2014_Mod_3
M E ROM v2 NORMAL EDITION and ME ROM v2 SLIM EDITION
N oteIII MetalBlueGoA v.3.2
M E! ROM
P ureXperia Final v3.1.1
C olor Os 1.0.1i LATEST STABLE
X OLO Q800
C olorOS v1.3.3 BETA
G ionee_GN708W-T24
A llview_Update__P5_Quad
N oteIII MetalBlueGoA v.3.1
N oteIII MetalBlueGoA_v.3
P ureXperia Final (v3.0.1)
D SW 24 [/ color]
N oteIII_MetalBlueGoA v.2
D SW 23
M odified sw 23
L ewaOS 5.0 12/08/2013 Mod 2
N oteIII_MetalBlueGoA v.1
N oteIII_MetalBlueGoA
P Reassembled NoteIII
R ePak IQ450 Q sw18 odex
P ureXperia Ultimate for Fly IQ446 [/ color]from Arhitektor58
B aidu OS Redefined for Fly IQ446 Style XPERIA Z1from Arhitektor58
L ewaOS_5.0_24-11-2013 Mod_1from kotgeorgia
F lyQ446-ZP 900H Mod_1from kotgeorgia
N ote III V1.1.0 for Fly IQ446from Arhitektor58
B AIDU YI OS rus
G ionee SV2.3from stas2z
A lternative Custom V5from back37
C ustom V2from back37
L ewaOS 4 Alex_zp
X olo Q800 v2.0.2
P ort from G4 Advanced (OS 4.2)from nekrasov21
X oloLiquid v2.0from nekrasov21
4 46 IQ450 Q sw18 odex InfusionNSKfrom InfusionNSK
P Walton Primo H2 based firmwarefrom eagle114
X PERIA HD rusfrom kotgeorgia
P ort from zopo_980_C2from nekrasov21
P ORT with Fly IQ450 Horizon 2from eagle114
S ony Xperia C (S39h) port RUSfrom stas2z
AT iodized firmware port from IQ451from InfusionNSK
P ORT with ZOPO ZP910
L ewaOS v4_rusfrom Galaxy Ace ICS
M USEUI port RUSfrom stas2z
X olo 800 Nexus rus
X peria Z_for Fly IQ446from Galaxy Ace ICS
P ort Zopo C2 JB 4.2.1from Galaxy Ace ICS
N exus 4_v.1from Galaxy Ace ICS
G alaxy S4 for Fly IQ446from Galaxy Ace ICS
F ly IQ451 portfrom stas2z
G amerzROM MTK Nexus Edition v1.0from kotgeorgia
N EXUS custom V2.1 RUSfrom stas2z
G IONEE GN708W - S4UIv2from kotgeorgia
X oloQ800Liquid
X oloQ800Liquidfrom kotgeorgia
X olo 800 Nexusfrom kotgeorgia
A lternative Custom V4from back37
P ort iq451from back37
P firmware from back37 on china-iphone

AT Idea firmware reviews for Fly IQ446from Neromax_GT
AT ideo reviews and various firmware testsfrom Kopinet
Instructions
Instructions for beginners!
D This note is intended for beginners and those who are not sure that they will be able to follow all the instructions listed below - correctly. (Simplified versions of the same manipulations)
1. How to get ROOT rights in one click on any firmware (including official firmware), without a PC?
- installFramaroot and follow the instructions for this application.
2. How to install / flash recovery (TWRP, CWM) in a couple of clicks?
- install on PCSvs flash recovery - carefully read the video instruction, and read the topic of this program, then this procedure will take you a couple of minutes! (ROOT rights for this procedure Not needed )
3. Another option is how to flash recovery - Mobileuncle MTK Tools .
Brief instructions on it:
- download archive with recovery, for example TWRP.zip (can download from here).
- extract from the archive TWRP.zip, a file called -recovery.img and throw on the flash drive.
- further in the applicationMobileuncle MTK Tools choose Recovery update / Recovery Update .
T Now, when you have a flash / recovery installed (TWRP, CWM), you can go directly to the spoiler with the instructions below - How to install custom firmware! )
(How to install drivers for Windows 8 users
1. Top right corner
2. Parameters
3. Changing computer settings
4. General
5. Special boot options>Reboot now
6. Diagnostics
7. Boot options
8. Reload
9. Reboots on the blue screen, press F7 (Disable driver digital signature verification)
10. Install the driver - following the instructions
How to flash the official firmware via the Smart Phone Flash Tool
Download the programsp_flash_tool_v3.1308.0.1
Download the firmware, unpack it in some folder (convenient for you)
Download drivers, unpack.
All unpacked, save in one place.
1. Turn on the phone USB debugging (go to Menu-Settings-For Developer - put a tick in front debugging )
2. Install the driver on the computer by running the necessary file: if the system is x86, then run the file "Drivers_x86.exe" if the system is x64, then the file is "Drivers_x64.exe"
If the system asks a question about installing unsigned drivers, then we agree, the request may not be one.
If the drivers are installed, in the task manager there will be such a picture
Attached Image


(the phone is on and connected to the computer from the back)
3. Turn off the phone and get the battery out of it.
4. Run the sp_flash_tool_v3.1308.0.1 program
In the window that appears, press the buttonScatter-loading as shown
Attached Image


In the window that appears, register the path to our downloaded firmware and click on the fileMT6589_Android_scatter_emmc.txt
Attached Image


Remove the check mark from the first item
Attached Image


Click onDownload ! NO OTHER NON-BUTTONS
PRESS!!!

Attached Image


In the window that appears clickYES
Attached Image


We connect the USB cable to the phone, in 2-3 seconds, in the programsp_flash_tool_v3.1308.0.1 the firmware will start, run first red strip then yellow at the end you will see green circle, phone flashed
How to install TWRP (recovery)
Downloading TWRP2.4.1.0 of collection of recovery or TWRP-FLY 446_2.6.3.0 and unpack
Download the programsp_flash_tool_v3.1308.0.1
Download the firmware, unpack it in some folder (convenient for you)
Download drivers, unpack.
All unpacked, save in one place.
1. Turn on USB debugging on the phone (go to Menu-Settings-For Developer - put a tick in front debugging )
2. Install the driver on the computer by running the necessary file: if the system is x86, then run the file "Drivers_x86.exe" if the system is x64, then the file is "Drivers_x64.exe"
If the system asks a question about installing unsigned drivers, then we agree, the request may not be one.
If the drivers are installed, in the task manager there will be such a picture
Attached Image


(the phone is on and connected to the computer from the back )
3. Turn off the phone and get the battery out of it.
4. Run the sp_flash_tool_v3.1308.0.1 program
In the window that appears, press the buttonScatter-loading as shown
Attached Image


In the window that appears, register the path to our downloaded firmware and click on the fileMT6589_Android_scatter_emmc.txt
Attached Image


We remove all the checkboxes exceptRECOVERY
Attached Image


We press right on the wordRECOVERY and in the appeared window we register the path to the downloaded by us TWRP2.4.1.0 and select the file recovery.img it will look like this
Attached Image


Click onDownload ! NO OTHER NON-BUTTONS
PRESS!!!

Attached Image


In the window that appears clickYES
Attached Image


We connect the USB cable to the phone, in 2-3 seconds, in the programsp_flash_tool_v3.1308.0.1 the firmware will start, run first red strip,
Attached Image


thenyellow,�
Attached Image


at the end you will seegreencircle,
Attached Image


TWRP is flashed into the phone.
How to get Root rights
Download this archiveAttached fileUPDATE-SuperSU-v1.69.zip(1.17 MB)
orfrom hereThe latest version of the SuperSU application in .zip format and throw it into the root of the SD card of the smartphone.
We have everything prepared and now we will get Root-rights. To do this, go toTWRP2.4.1.0 RECOVERY on the phone off, hold down the key Volume (+) and ON button , hold them for about 3-5 seconds. Smartphone turn on and boot into TWRP2.4.1.0 RECOVERY.
We press the buttonInstall
Attached Image


Put the blue / red dot, as shown
Attached Image


In the list we find the previously zipped Zip-file (SuperSU.zip), click on it.
This window will open:
Attached Image


Click on the arrow and move it to the right, firmware will go:
Attached Image


After the end we pressReboot system
Attached Image
How to install custom firmware via TWRP recovery
Download the archive with the firmware in the .zip format and throw it into the root of the SD card of the smartphone.
Go toTWRP2.4.1.0 RECOVERY on the phone off, hold down the key Volume (+) and ON button , hold them for about 3-5 seconds. Smartphone turn on and boot into TWRP2.4.1.0 RECOVERY.
Choose an itemWipe
Attached Image


Making three Wipe: Cashe, Dalvik Cashe, Factory reset
Attached Image


We press the buttonInstall
Attached Image


Put the blue / red dot, as in the picture (if not worth it). We see the root of your SD-card.
Attached Image


In the list we find your firmware in Zip format, click on it
This window will open:
Attached Image


Click on the arrow and move it to the right, the process of installing the firmware will begin:
Attached Image


After the end we pressReboot system
Attached Image
How to install custom firmware via CWM recovery
Moving points by using the volume buttons (on the side of the phone), and the choice of an item is done using the Power button (on the side of the phone).
1. Turn off the phone (waiting vibro signal)
2. We hold the "Volume +" rocker and turn on the phone (you can release the rocker for half a second), the Recovery menu is loaded
3. Using the Volume rocker, select the "install zip from sdcard" item and confirm with the power button
4. Select the item "choose zip from sdcard" and confirm with the power button
5. Select the archive with the patch or firmware and confirm with the power button
6. Select the item "Yes - instal *******. Zip" and confirm with the power button
The process of the firmware will begin, on completion you will see the inscription .... Complete ....
7. Using the rocker, select the item "+++++ Go Back +++++" go to the main menu and select "reboot system now"
How to make BackUp - creating a backup system
Go toTWRP2.4.1.0 RECOVERY on the phone off, hold down the key Volume (+) and ON button , hold them for about 3-5 seconds. Smartphone turn on and boot into TWRP2.4.1.0 RECOVERY.
Choose an itemBackup
Attached Image

With this item, you can make a complete copy of your system, along with data and applications, available in the internal memory of your device.
Backup section in TWRP allows you to backup the entire system of your device, as well as select which sections you want to include in the backup, and even allow you to change the names of the created backups. You can also see the available space on the SD card of your device, and can calculate whether this is enough space to create a backup.
Attached Image


Confirm your choice with the slider and TWRP will begin the process of creating a backup system
Attached Image

In case you decide to store your backup on a PC, then you need to connect your smartphone via USB to a PC, and copy / cut the folder located inSD-card / TWRP / BACKUPS / IQ446_MT6598 / ** your backUp **
Restore - How to restore a system from a previously made backup
Go to TWRP2.4.1.0 RECOVERY on the phone off, hold down the key Volume (+) and ON button , hold them for about 3-5 seconds. Smartphone turn on and boot into TWRP2.4.1.0 RECOVERY.
Choose an itemWipe
Attached Image


Making three Wipe: Cashe, Dalvik Cashe, Factory reset
Attached Image


Choose an itemRestore
Attached Image


In the list of backups, choose the one you need.
Attached Image


After selecting the backup, you will have the opportunity to select the System, Data, Boot, Recovery, Cache, Uboot, NVram partitions that you want to restore.
Attached Image


Using the slider, drag the circle to the right, the process of restoring your system will begin.
AND Goodix GT9XX touchscreen restoration instructions
Most likely you installed the firmware with someone else's kernel. And you did not help the firmware with the native core.

Now your config is most likely different from the native one.
You can see the config of the tach through the terminal: cat / proc / gt9xx_config (mtk only)
Or in the gtp_tools program.

It starts with a byte sequence:
0x41 0x1C 0x02 0xC0 0x03

0x41 - 65 version
0x1C 0x02 - 540 horizontal resolution
0xC0 0x03 - 960 vertical resolution

The touch should at least somehow work to press the buttons, if there is otg support, then it's easier, you can connect a mouse.

1. Install gtp_tools
We will have gtp_tools_v2.6_20140126_specialhttps://yadi.sk/d/9Crpw-lffmtFx

2. Go to the item Firmware update
Press refresh, we see IC Version: 913_1020
We have a GT913 touch and 1020 firmware.

If the firmware version coincides with the native one, go ahead.

3. Go to Config Settings.
Click read, the data was considered.
On the Normal Config tab we have:
65 version
540 horizontal resolution
960 vertical resolution

4. Click browse, select click browse with native config.

We take the native config from the working device, at the same point press save (saves the backup of the config to a file).
Native config for Fly IQ446https://yadi.sk/d/c3VATnEAfgYPm(suitable for most, but there are exceptions)

Click send.

5. If nothing has changed, look at the version with you and the native config.
And we change the version in the file of the native config to yours in hex.
Example: native 0x41 = 65, alien 0x49 = 73 =>replace 0x41 with 0x49.

And install it.

P Full instruction and description of all other TWRP items
P Get Root on KK 4.4.x without PC

TWRP recovery
TWRP 3.0.2.7
T WRP 2.8.4the backup is saved to a folder sdcard0 / TWRP / BACKUPS / Fly_IQ446_Magic and allows you to restore backups from previous versions of TWRP
T WRP 2.8.4from friends from india
T WRP 2.8.4.0from ANDR7E
T WRP 2.8.0.0 with SE Linux supportfrom friends from india
T WRP-FLY 446_2.6.3.0
Collection of recovery, to install root-rights, and flashing a smartphone, custom firmware
Useful
Remapping memory through Recovery
Instructions for redevelopment using the "SP Flash Tool"
How to flash the official firmware on the re-allocated memory using the SP Flash Tool
NVRAM WARNING error appears in Wi-Fi: Err = 0x10one more tip from uvadeich
Wi-Fi error tips: NWRAM WARNING: Err = 0x1using the programSN Write Tool
Mobile Memory Markup
Who flies IMEI after installing MIUI v6
Instructions on how to restore using imei & sn writer v1.5.3
Repair IMEI
Repair IMEI MTK
MTK FirmwareAdapter Tool- A program to automate the process of porting. It is based on the knowledge base - projects, which should consist of the necessary list of files for launching the port on your device. (There is a video instruction. Annotations in the Youtube player should not be disabled, because the links to the video are clickable)(The problems and their solutions are discussed in the program's topic!)
SuperSU- Advanced access control for superuser rights to applications on the device that need root.
Xperia keyboard- Sony keyboard, enjoyable to use. Installation via CWM.
Recover lost when hardware reset IMEI
GPS setup on smartphones on MTK6589
Mobileuncle MTK Tools- The program allows you to perform many operations with the systemflash recovery , enter the engineering mode without dancing with a tambourine, handle files and much more.
GAPPS- Google services
Framaroot- Getting root-rights on Android-devices in one click and without a computer.
Svs flash recovery- With this application you can flash the recovery in a couple of clicks.
All radio modules
miscellanea
ABOUTUpdating Software Fly smartphones at home.
AND similar codes (updated version)
AND similar kernel codes for IQ446
P about revisions
The program for unpacking / assembling boot.img
H Avodskie schemes IQ446
Scatter's
Attached fileMT6589_Android_scatter_emmc_iq446_sw_20130403_sw18_fly.rar(324 bytes)
- Original Scatter from the 18th firmware
Attached fileMT6589_Android_scatter_emmc_SW18_for_GN708W.zip(411 bytes)
- Scatter for Gionee GN708W
Help in the firmware remotely.
ProgramTeamviewer- if you are not confident in your abilities or are afraid, but “want”, then with its help one of the members of the forum: brazil4, Grinya_tlt, roleq1 or someone else (who willonlineand will not refuse you), will be able to help flash your smartphone remotely. For this you will need to download the program.Teamviewer, firmware, driver and SP Flashtool. QMS Help Details
Results of previous surveys
Attached Image

Attached Image

All questions about CyanogenMod, OmniRom, KitKat on MTK6589 / 6589T discuss HERE


There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.



Post has been editedAkella_MC - 19.02.18, 19:38
Reason for editing: White_ART_4.4.4
JB E.ZORG
Message#2
27.02.13, 10:21
Jean-Baptiste Emmanuel Sorg
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3414
Check in: 26.07.09
Oukitel K6

Reputation:-  304  +

Stage 1.Start.

Post has been editedJB E.ZORG - 24.06.14, 18:29


--------------------
- You are a monster! - I know! - J-B E.ZORG © (Fifth Element)
- What do you feel when you shoot real people? - I feel the recoil ... (joke)
Ex-curator 4
seniaxls
Message#3
06.03.13, 12:53
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 172
Check in: 12.09.07

Reputation:-  25  +

General concepts:
Firmware are divided into 2 types
1. There are many files in the archive with the extension * .IMG - flash the program Flash tool, usually these are official firmware
2. Archive * .ZIP there are not many files in it, several folders including. META-INF - flashing through Recovery, Custom firmware, various patches

For Windows 8 users, you need to disable driver digital signature verification.
For firmware and driver installation:
1. Top right corner
2. Parameters
3. Changing computer settings
4. General
5. Special boot options>Reboot now
6. Diagnostics
7. Boot options
8. Reload
9. Reboots on the blue screen, press F7 (Disable driver digital signature verification)
10. Install the driver

Flash the new firmware
We are flashing the new firmware via the Flash tool:
Download:
- Drivers
- Flash_tool
- Firmware
Flash_tool and Firmware are recommended to unpack to a folder on drive C: not having Cyrillic in name
Example: C: \ firemware \ ......

1. Install the driver (respectively x64, x86 system)
2. Start Flash_tool
3. Select the item "File" and then click on the item "Open Scatter-loading file".
4. Now in the opened window you need to select the file MT6589_Android_scatter_emmc.txt in the folder with the firmware
5. Turn off the phone, take out the battery, SIM, flash.
6. In the program, press the "Download"
7. The appeared inscription is not readable and boldly press the affirmative button.
8. Connect the phone to the lanyard
9. Upon completion of the process, a window with a green circle will appear on the screen.

Mad Devil @ 03/06/2013, 14:03*
Tick ​​with PRELAODER is recommended to remove.
Yes, and when downloading off-firmware, you can also immediately pick up the recovery by selecting the desired image.

When flashing FlashTool, if you uncheck UserData, then all personal information and settings will not be deleted.


We flash the upgraded RECOVERY
We flash the upgraded RECOVERY

Download:
- Drivers
- Flash_tool
- Taiwan101-GIONEE-GN708W_CWM_Recovery(password for taiwan101 archive) orTWRP2.4.1.0
Flash_tool and Firmware are recommended to unpack to a folder on drive C: not having Cyrillic in name
Example: C: \ firemware \ ......

1. Install the driver (respectively x64, x86 system)
2. Start Flash_tool
3. Select the item "File" and then click on the item "Open Scatter-loading file".
4. Now in the opened window you need to select the file MT6589_Android_scatter_emmc.txt in the folder with the firmware
5. In the table, remove all the checkmarks, leaving only the "RECOVERY"
6. Double click on "RECOVERY" and select the recovery.img file from the downloaded Taiwan101-GIONEE-GN708W_CWM_Recovery or TWRP2.4.1.0
7. Turn off the phone, take out the battery, SIM, flash.
8. In the program, press the "Download"
9. The appeared inscription is not readable and boldly press the affirmative button.
10. Connect the phone to the lanyard
11. Upon completion of the process, a window with a green circle will appear on the screen.

Mad Devil @ 03/06/2013, 14:03*
Tick ​​with PRELAODER is recommended to remove.
Yes, and when downloading off-firmware, you can also immediately pick up the recovery by selecting the desired image.

When flashing FlashTool, if you uncheck UserData, then all personal information and settings will not be deleted.


And so now we have RECOVERY what it is and what it is eaten with, you can readhere
Through Recovery we install for exampleROOT

Buzzhorn @ 02.26.2013, 23:51*
And one more thing, when installing ROOT, SuperSU will be installed in Chinese (you can’t immediately replace it or delete it) so we launch it. For many who know Chinese and dialects Taiwanese will not make
labor to understand, for others, we press the right button! Next, download the program for deep removal,
I recommend SystemApp_Remover_v4.28.RUS or another. Install the .apk file, run!
SuperSU will ask for confirmation (I tell you this, as a Chinese expert))) We press the right
button, u. Next, look for the SuperSU application in the system and delete! Downloading the same from Market


You can also install the firmware repackSW11
Changes:
- Removed some junk
- Added root and busybox
- In the market we see everything that sees the Galaxy Nexus
- Equalizer enabled in stock player (SRS)


Flash through RECOVERY
Download the patch or new firmware and place it on a USB flash drive (do not unpack the .zip archive)

1. Turn off the phone (waiting vibro signal)
2. We hold the "Volume +" rocker and turn on the phone (you can release the rocker for half a second), the Recovery menu is loaded
3. Using the Volume rocker, select the "install zip from sdcard" item and confirm with the power button
4. Select the item "choose zip from sdcard" and confirm with the power button
5. Select the archive with the patch or firmware and confirm with the power button
6. Select the item "Yes - instal *******. Zip" and confirm with the power button
The process of the firmware will begin, on completion you will see the inscription .... Complete ....
7. Using the rocker, select the item "+++++ Go Back +++++" go to the main menu and select "reboot system now"


Make or restore backup via recovery
When installed, the upgraded Taiwan101-GIONEE-GN708W_CWM_Recovery recovery
1. Turn off the phone (waiting vibro signal)
2. Clamp vol + and turn on the phone (you can let go of vol + for half a second)
3. Using the Volume rocker, select the "backup and restore" item with the pwr button
4. To create a backup, select the "backup" item to restore the backup. "Restore" is confirmed with the pwr button
5. When restoring, choose your backup; confirm pwr; select +++++ Yes; +++++ confirm pwr



Post has been editedseniaxls - 08.03.13, 21:28


--------------------
DNS s4007
adeich
Message#4
06.03.13, 15:48
謝爾蓋
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2919
Check in: 13.08.11
Samsung Galaxy A3 (2016) SM-A310F

Reputation:-  519  +

AndyOne,

but did not try it? -
Recover lost when hardware reset IMEI

Post has been editedadeich - 06.03.13, 15:49


--------------------
Fly iq446 magic ->Samsung SM-A310F Galaxy A3 (2016)
Lenovo TAB 2 A10-70L
back37
Message#5
14.03.13, 13:50
<<*<<*<--->*>>*>>
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2883
Check in: 25.05.08
Xiaomi Mi Mix 3 6/128

Reputation:-  691  +

[size = 150]Original firmware GPLUS GN708W (ENG / CN / ES ... without RUS)[/ size]

Pure original firmware, a lot of languages, but there is no Russian: D
A bit more interesting, there are themes that seem more stable ...

Download:
http://files.china-iphone.ru/8GN708.zip

P.S.Put through the recovery. Probably the USB host / otg works, the libraries seem to have the appropriate ...

Post has been editedback37 - 15.03.13, 13:14


--------------------
Xiaomi mi mix 3 6/128 Global | Mi Band 2 Global (BT4.2LE)
Asus T100TA 64Gb 1st Gen. - MSI GP72VR 7RFX leopard
brazil4
Message#6
21.03.13, 16:41
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2146
Check in: 02.08.09
Xiaomi Redmi Note 5 Pro

Reputation:-  201  +

Adeich @ 03/21/2013, 18:48*
Who cares, china-iphone has a theme and program -Repack logo.binto correct the initial screen saver (start image).

I fixed it in 5 minutes like this
[attachment = "2718157: boot_logo_1.png"]

Upload the ready-made file for replacement


--------------------
Xiaomi Redmi Note 5 4/64 China

brazil4
Message#7
24.03.13, 16:37
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2146
Check in: 02.08.09
Xiaomi Redmi Note 5 Pro

Reputation:-  201  +

Enhanced Power Menu no one else did?


--------------------
Xiaomi Redmi Note 5 4/64 China

back37
Message#8
24.03.13, 16:41
<<*<<*<--->*>>*>>
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2883
Check in: 25.05.08
Xiaomi Mi Mix 3 6/128

Reputation:-  691  +

brazil4,
In general, no one, already boring: D Who would repeat:http://forum.china-iphone.ru/post998868.html#p998868


--------------------
Xiaomi mi mix 3 6/128 Global | Mi Band 2 Global (BT4.2LE)
Asus T100TA 64Gb 1st Gen. - MSI GP72VR 7RFX leopard
unikum111
Message#9
29.03.13, 13:13
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 150
Check in: 10.10.10

Reputation:-  6  +

Can someone come in handy, melodies from IQ446_SW11 -https://docs.google.com/file/d/0B3q5_OWkOeo...dit?usp=sharing


--------------------
Arch Linux x86_64
brazil4
Message#10
02.04.13, 23:07
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2146
Check in: 02.08.09
Xiaomi Redmi Note 5 Pro

Reputation:-  201  +

There are no complaints about the work of SW18 ... the only thing is that after a reboot (not always), custom tunes fly off the bell .. I didn’t do this on SW11)))) I continue the test.


--------------------
Xiaomi Redmi Note 5 4/64 China

** Furer **
Message#11
02.04.13, 23:31
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 262
Check in: 06.05.12
Apple iPhone 6s

Reputation:-  37  +

Test firmware for Fly IQ446 Magic SW16http://dfiles.ru/files/6vi51o5lc
Improved:
1. The sound in the headphones was noticeably better.
2. The proximity sensor works more stable, there are no problems
3. Improved optimization with some games (sound and image in NFS is excellent now)
4. Installed Vault Prog
5. Multimedia memory does not hang
6. Communication breaks are no longer observed.
7. The pink stain has become less noticeable.

P.S. It works just great, I advise everyone! When rebooting (3 times rebooted), the melodies did not disappear. Problems in this firmware was not found for almost 2 days of use.
dars73rus
Message#12
19.04.13, 15:15
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 611
Check in: 27.03.13
Asus Zenfone Go ZC500TG

Reputation:-  52  +

IQ446. New firmware.

Support staff
posted on Apr 18 14:55
inShare

Name: IQ446_SW_20130403_SW18_FLY

Changes: the work of the proximity sensor is corrected, the problem of communication breakdown when moving at speed is corrected, a number of patches from MTK are also applied, to optimize the performance of the smartphone.

https://flymobile.zendesk.com/entries/23607...B2%D0%BA%D0%B0-

can the last sw18 be considered official?


--------------------
kotgeorgia
Message#13
21.04.13, 02:20
The pros
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 628
Check in: 30.05.09

Reputation:-  60  +

Disabling driver digital signature verification 64-bit versions of Windows 7/8
Press the keys Win + R or Start - Run and enter the commandgpedit.msc
The Local Group Policy Editor opens. FindUser configuration - Administrative Templates - System - Driver installation.
In the right half of the window we findDigital Signature Device Driver. Double click or right click on this item and selectChange.
In this window, select the itemTurn off. Apply and OK. If you chooseEnable, then you can additionally choose how the system reacts to a driver without a digital signature

Post has been editedkotgeorgia - 21.04.13, 02:21


--------------------
Samsung Galaxy S7 Edge SM-G935FD
Lemfo LEM5 Pro MINIX Neo U9-H
floe13
Message#14
25.04.13, 13:23
I was here
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1016
Check in: 27.08.07
UleFone Armor 5

Reputation:-  91  +

Drivers do not recognize the phone have a solution?

Psychics on vacation ...
Try the standard options - force the installation of drivers through the device manager, enable debugging, change usb port


--------------------
what I want to write is unresolved, but what can be done, I don’t want to write myself)))"the rudeness and arrogance of the small people who are in managerial positions are compensated by the pofigism of the leadership of these people ..."
brazil4
Message#15
25.04.13, 13:27
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2146
Check in: 02.08.09
Xiaomi Redmi Note 5 Pro

Reputation:-  201  +

7th jumps there and there, then there are no drivers

In the task manager, when you appear for a while, click on it and update the driver + advice that is higher ..))))


--------------------
Xiaomi Redmi Note 5 4/64 China

ifoo
Message#16
25.04.13, 14:48
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 68
Check in: 20.11.12
Google Nexus 6P

Reputation:-  1  +

I don’t know who to address, who doesn’t succeed, try this:
Try connecting the body to the rear port of usb (behind the system unit), maybe the front ports do not work correctly.

Post has been editedifoo - 25.04.13, 14:53
Juraz
Message#17
25.04.13, 14:51
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 376
Check in: 23.12.12
Asus ZenFone Max Pro M1 ZB602KL 4/64

Reputation:-  9  +



In, went firmware. I hope everything will be fine


--------------------
Asus ZenFone Max Pro M1 ZB602KL 4/64
brazil4
Message#18
25.04.13, 15:35
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2146
Check in: 02.08.09
Xiaomi Redmi Note 5 Pro

Reputation:-  201  +

Well, it means everything was sewn .....
It is necessary to add necessarily in a cap with a mark:
If, with the firmware, one red strip passed and an error occurred, then you need to use another Flashlightand give a link.

Posted on 04/25/2013, 15:35:

Tell me please! Which is better, install the firmware first and then the recovery, can you pick up the recovery with the firmware or is it better to do it separately?

at the same time, you first prescribe the path to the firmware in Flashstore, as in the instructions, then click on the RECOVER line and prescribe the path to the pre-downloaded TWRP recovery. After the firmware you have a new firmware and TWRP recovery

Post has been editedbrazil4 - 25.04.13, 15:45


--------------------
Xiaomi Redmi Note 5 4/64 China

_il74
Message#19
25.04.13, 16:52
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 156
Check in: 21.05.11
Acer Iconia Tab A500

Reputation:-  7  +

Please insert the capthese files, others helped me, and the files from the header never got up.
lionshg
Message#20
25.04.13, 19:07
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 136
Check in: 10.04.11
Microsoft Lumia 640 DS

Reputation:-  56  +

And the link can be once more on this repack? I did not find something ...


here, although he has already “made his own” new cast :)http://forum.xda-developers.com/showthread.php?t=2247786


--------------------
Sony Ericsson M600 UIQ3 =>>Huawei u8800 ideos x5 =>>Fly IQ446 Magic =>>Lumia 640 3G DS ==>>huawei nova 2s
lionshg
Message#21
25.04.13, 19:37
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 136
Check in: 10.04.11
Microsoft Lumia 640 DS

Reputation:-  56  +

and there is no special understanding and nothing :)brajesh143tookrepack back37, slightly embellished, replaced the launcher with a Nova (or MIUI to choose from), dialer (setReactiv Dialer), also replaced the contacts, SMS and browser with the ones from Nexus 4.2.2. Screw the "improvers" of sound, such as the Beats Audio Engine. But in general, it's all the same repack from BAKA v1.7, the current is a bit customized;)


--------------------
Sony Ericsson M600 UIQ3 =>>Huawei u8800 ideos x5 =>>Fly IQ446 Magic =>>Lumia 640 3G DS ==>>huawei nova 2s
Fly
 

873 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 01/05/19, 07:19