Here are the contents of the archives. I pour on ya.disk.

Sew scary :) Inside .pit files (which means there is a re-initialization of sections), SCC, PDA and a checksum.md5 What is the last to do, no one tell me?

Post has been editedserg1ua - 04.09.13, 00:02

Instructions on firmware 4.1.2 (leaked official firmware)
ATTENTION! Everything you do - you do at your own risk! No one but you, the responsibility for the "bricks", warming Antarkdide and so can not be held!
1. Downloadarchive
2. Raspakovyvete to any folder
3. Zapuskate attached file Odin v.1.86.exe
4. Take your phone and enter it into Download Mode (Off Key + Volume Down + button "home"), then "Volume Up"
5. Choose the files (for PIT - GT-I8160_EUR_XX_4G.pit, for PDA - CODE_I8160XXMB2_932015_REV00_user_low_noship.tar, for CSC - CSC_OXA_I8160OXAMB2_932015_REV00_user_low_noship.tar)
6. Press the "START" and wait for completion. After that, do not touch the phone until the time of loading.

Post has been editedshoma_81 - 14.06.16, 22:35

root.zip(1.37 MB)

ROOT for JB. Sew through the standard rekaveri:
1) Throw in the SD card root
2) Reboot in rekaveri key (off / on + volume up + "home" button)
3) Select install update from external storage
4) Sew root.zip
5) Reboot

Post has been editedCOMATOSE - 09.02.13, 01:11

Firmware I8160XXMB2 (Jelly Bean 4.1.2)

Features of the firmware:

• All user data (settings, contacts, applications, ...) will be erased. Counter not tiknet. Data on the external card is not erased
  
• Downloaded tgz-file need to flash usingOdin3 v3.07(Or higher) as a PDA
  
• In the transition from GB need to flash twice to catch PIT-file
  
• PIT-file never point out the checkbox "Repartion" do not put
  
• The firmware includes the following regions: SKZ, SER, SEK, RTL, CAC
  
• For Ruta need to install after installing the firmwarethis archivevia Recovery
  

Differences from the original version utokshey:
- Regional data are replaced with an Asian onCCCPCIS (without Yandex-slag)

Leak itself -here. thankizap

PS. This - not route-piercing! But it is possible to put Ruth (as any other)

Post has been editedavkiev - 09.02.13, 22:38

As I understand Partitioning sections means that their size has changed in JB.
Please, somebody what new partition sizes?
For comparison, GB are:

Here deodeksirovanny SecPhone.apk of S Advance firmware without slew ring. Copy in the system, set the right D, move the app to the replacement. SecPhone.odex file delete. I check for yourself, and it works. Before the change, make a copy of the original and SecPhone.apk SecPhone.odex.SecPhone.apk(9.25 MB)



Post has been editedDeamonus - 11.02.13, 19:48

How to install firmware JB 4.1.2 XXMG2 (Russia, Ukraine)?
You can obnovtsya c GB 2.3.6 using Kies. To do this, your smartphone should be chosen CSC-SER to SEK Russia and Ukraine. Mzmenit product code (CSC) of your phone on firmware GB 2.3.6 you can use the code * # 272 # * imei on firmware JB 4.1.2 CSC can be changed usingthis programs
Update over the air (FOTA) is not available!
You can also install the firmware data using Odin Odin, over any official or test firmware, it does not matter rutirovana it or not, and whether it changed the memory locations
More preferred is a method for updating through Kies. Before and after the firmware is recommended to wipe data / factory reset and wipe cache partition. It is also desirable to format the inner and outer stick. After the firmware to 2.3.6 is NOT recommended auto-recovery of funds account. Those. after firmware \ complete wipe with formatting the internal storage is necessary to remove a tick "to restore data to your device from my account." RAM 624 Mb of the firmware
Stock rekaveri not see update.zip on the outside of the flash drive. Installation root / CWM gives an error; CWM can not see an external USB drive.
Format the USB flash drive if the USB flash drive does not work, use a smaller volume 1-2Gb
How to remove the root?
Come in SuperSu program в†’ Settings в†’ Completely remove the root.
Stock filemanager / audio player, etc. Can not see or throws in the menu when you open the memory card
Format the card, rename files with long names or contain special characters
How to really speed up the response of the interface and applications?
Settings в†’ Developer options, turn off all animation scale
Friezes when recording / playing videos and games. How to fix?
Try to limit background processes in Settings в†’ Settings в†’ Developer Limit background processes
Disable hardware overlay
Forced GPU processing
Also helps restart devaysa
Is there any overclocking? / Is there overclockable kernel?
NOT
Are firmware suitable for GT-I8160 model to model GT-I8160P (NFC), and vice versa?
No, do not fit
What to do if you change it flew ModemFS and now the firmware version (Baseband): XXXX
To readhere and here If you do not have a backup ModemFS is suitable backup from another devaysa Dunno model. proof here
Some features of charging and discharge of the battery
Samsung GT-I8160 Galaxy Ace 2 - Firmware (OS 4.1.2) (Post # 23627592)
to JB 4.1.2 Will there be a renewal for SGA 2 I8160 LaFleur
Expected soon
Is it possible to flash the SGA 2 I8160 LaFleur iOS 4.1.2 JB for conventional SGA 2 I8160?
You can, but you lose all the "buns" by LaFleur
I'm on firmware 2.3.6, never sewn. Should I be sewn on 4.1.2 firmware and what better to choose?
Up to you. All questions in the subject, such content, as well as their answerswill be deleted without warning
After flashing my phone will not boot / black screen when you unlock / flash after the process falls setupwizard
Try to flash again. If it does not, and then -returnon 2.3.6
After installing the firmware Portuguese XXMC8 my RAM 482Mb?
First, you need to install one of the test firmware MB2 and MB4, and then sewn Portuguese, then memory is 624Mb
How to flash on 4.1.2 XXMC8, XXMF1 (Britain) and what it the amount of RAM?
If the firmware on the British MC8, MF1 over 2.3.6 get 550Mb of RAM. If you will perfectly sew together the British MC8 MC8 over Portugal with 624Mb RAM, or on top of one of the test firmware, you will get 624Mb of RAM.Just to update "over the air" to MC8 on MF1 RAM increased from 550 to 624 MB. The device runs stably on British firmware with 550 Mb RAM
How to upgrade to the British JB via Kies
Samsung GT-I8160 Galaxy Ace 2 - Firmware (OS 4.1.2) (Post # 22392465)
How to flash on XXMF1 (Germany, Ireland, Luxembourg) and what amount of RAM in it?
When you upgrade to 2.3.6, you will get 482 Mb, in piercing through one of the test firmware XXMB2, XXMB4 or through XXME7 (Turkey), you will get 624 Mb of RAM. You can also sewmodified firmware XXMF1 (Germany) with 550 Mb of RAM.Better performance is achieved at 482 Mb or 550 Mb of RAM
What to flash on XXME7, XXMH1 (Turkey) and what it the amount of RAM?
When you upgrade to 2.3.6, you will get 624 Mb of RAM, in piercing through one of XXMB2 or XXMB4 test firmware, as well as official for Portugal, UK, Germany, you also get 624 Mb of RAM. Which of firmware sequences better-you decide. Opinions in this respect from the owners of this device differ
How to get root-rights in this firmware?
Instruction
It does not work Bluetooth / does not turn on after turning through the curtain
Essential root-rights. ViaRoot explorer, System app removerorTitanium backupBluetoothTest.apk you want to delete the file. However, in some cases, this may not help.
After the firmware to 4.1.2 can not I use the mobile Internet, how to fix?
Make automatic settings from the operator, or mount it manually again
How to send MMS at the disconnected data on XXMC8 (UK)
Samsung GT-I8160 Galaxy Ace 2 - Firmware (OS 4.1.2) (Post # 22896212)
How to change the keyboard?
After installing the new keyboard is on the path Settings ->Language & input and staite tick the desired keyboard. Then go in any entry field, and act according to the screenshots:

How to enable a response to the call / reset buttons call "home" and power?
Go to Settings ->Special abilities ->Answer / end
What are the stock applications can be deleted?
Listprograms that can be deleted. Folder system / apparchive/folder on Dropbox(You can download the files separately)
How to enable vibration when you answer the call?
Phone ->Call Settings ->Low level call ->Bibratsiya during calls ->Bibratsiya when answering
How to change the place of Flash-cards and internal memory?
Instruction. However, it is not recommended to do it at 4.1. It can cause instability in the working and incalculable consequences
How to make a screenshot?
Requiredat the same timepress the keys off and "home" and keep them a couple of seconds.
What is different from the usual deodeksirovannaya firmware?
Samsung GT-I8160 Galaxy Ace 2 - Firmware (OS 4.1.2) (Post # 19649958)
How to solve the problem of large weight DCIM folder?
Samsung GT-I8160 Galaxy Ace 2 - Firmware (OS 4.1.2) (Post # 21159805)
What to do if sending SMS to the recipient come characters, or a warning message appears?
I go in the SMS configuration mode and chooseAutomatically .
The keyboard switches to the Russian language, but still writes on angliysom.
Turning off T9 (continuous input) or put side of the keyboard.
Is there a record of a line without third-party software?
Not
In the call log and messages show only the number but not the name of the subscriber. How to decide?
Change the phone number, so that it starts with 7
Media process of "eating" battery charge, what to do?
We readHERE And the fact that above and below the post


Post has been editedserg1ua - 02.01.14, 12:17

You make a new file in any text editor on a computer (PC), choose "Save As", the file type is all files (*. *). Enter the file name.nomedia (always with a dot at the beginning!)

And save.

Putting the .nomedia file is necessary in the NEW FOLDER! Which is not yet known to the player or gallery (that is, not indexed).
If the files were already abandoned there before, then you can:
one). Rename folder
2). In the player or where you need to choose to update the directory (reindex).

Or download the finished version of the .nomedia file :)
http://fileshare.in.ua/7148882
http://d-h.st/TLW
https://mega.co.nz/#!IYkjFSxb!bh7R_...leKxT7h5wgnZuoo

Post has been editedamrs - 13.02.13, 18:33

Swap USB-drive and an external memory card!
: Dancer: There is no longer a problem disappears after moving applications to the SD card! : Dancer:
1. Downloadingvold_modifed.zip(711 bytes)

2. Extract the archive to the Dive Computers
3. Copy dragged from the archive vold.fstab phone
4. Root explorer copy vold.fstab, pass into the directory / system / etc (stored in the root file system)
5. Click the button in the upper right corner of the right R / W
6. Click the button "Insert", agree with the replacement
7. Reboot and enjoy!
To restore everything as it was doing the same thing only with this filevold.zip(708 bytes)



Post has been editedserg1ua - 03.01.14, 11:58

http://forum.xda-developers.com/showthread.php?t=2141395- A new version of CWM
launch:
1. Setupdate.zip
2.gotovo: D
It is still a one-off, but it is easier to run

Posted on 16.02.2013, 19:51:

put deodeks until advise. all you need hands to do, and this is still the crap


Post has been editedserg1ua - 03.01.14, 11:58

Well, then I do not know, you hike a half demolished system.

agree at least 30% must be demolished to figure v230 RAM was

I no longer deleted, why keep a program which do not use. RAM 220-260.

Still I decided to go back to 2.3.6.

The reasons are as follows:
1. Bluetooth is no longer included in general, even reboot does not help.
2. The battery is seated still faster than GB.

It's funny that as soon as the set of these problems were not for 2 days completely. As long wait, how to modify - always put, all the same it is generally better, but these bugs are annoying. Here.

manually. from there, and from there. wanted more in the data cache of dalvik remove tails but something vpadlu.

Added inEmbellishments and modifications for Samsung Galaxy ACE 2
Display modes battery[JB-LEAK-MB2] [mod] BatteryMod (C style selection option)

Post has been editedCOMATOSE - 17.02.13, 01:04

Cards almost there with me, but they must become more every day, when you use an assistant.

and, a second embodiment of the figures in 2.3.6.


PS: still appears after you change any settings a battery starts to go in front. this after installing battery mod. It calms down after a reboot.


Post has been editedklush - 17.02.13, 05:55

klush And I was to eat it after reinstalling framework. plus steel podlagivaet some applications and, after they hang, the phone has become overloaded

Post has been editedalexey-nik1982 - 17.02.13, 06:02

Shilsya Samsung Galaxy Ace 2 - Firmware (OS 4.1.2) (Post # 19418181)
everything works, no bugs, except for the question about Jora batteries ..