> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


603 pagesV  1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> Jiayu G2S (MTK6577T) - Firmware
Lepi
Message#1
18.07.13, 18:43
status quo
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 5029
Check in: 08.02.11
Pocophone F1 6/64

Reputation:-  3061  +

Jiayu G2S (MTK6577T) - Firmware
PictureJiayu G2S
Description | Discussion � | Purchase � | Firmware� | Accessories �

Instructions and Mini FAQ
Firmware
I remind you. Flashing a smartphone, you do everything at your own peril and risk, and no one is responsible for your actions and the "dexterity" of hands!
If you have installedmoderation (CWM, TWRP)do not try to enter the menu"Settings Restore and reset"and return to factory settings. Will receivecyclic reboot!

If you don't haveuninterruptible power supply, you also risk gettingtemporary brickwhen turning off electricity during flashing throughFlashtool.

And one more "Achtung"from a friendly forum from the branch" Universal instructions for firmware MT6575 / 77 devices ":
"Amendment to all the instructions for the firmware that you read or still read: SewPRELOADERandDSP_BLneed only in the case of lifting bricks! In all other regular updates and flashingIN NO CASEdo not put inFlashtoolthese ticks andDO NOT include formattingbecause You may have problems that you will not be able to cope with at home or it will be difficult to do. The mindless flashing of these sections is absolutely useless and very risky, especially on the platforms MT6575 and MT6577 "- the end of the quote.
Once again I remind you that this is a quote. Want to ignore the warning, your personal business.

The problem of compatibility of firmware with memory chips in our device is describedhere. Be careful!
Until it is finally proven that this is not a problem, a warning remains. Although there isauthoritative opinionthat the problem is contrived.
Instructionfirmware incompatibleROMwith a memory chip in your phone.Information oninternal memory chip

����������� �������� download

For beginners, I tell you that the downloaded archive of the official firmware is not yet the file that needs to be flashed. It needs to be unpacked. Inside the archive a lot of useful and "useless" files.
For firmware under recovery, you need to use the fileupdate.zipWhich is thrown into the root of the SD card.
For flashing the firmware, the contents of the directory are used, for example,G2s_20130109-104044or similar, but with a different release date.

1. Official firmwarefor RecoveryG2s_20130109-104044_SD orhere. Andfor FlashTool G2s_20130109-104044_FTorhere
2. Official firmware for RecoveryG2S-20130306-143807 SDorhere. Andfor FlashToolG2S-20130306-143807 FTorhere
2a Mirrors for official firmwarehere.
3. Deodexed official firmware for RecoveryG2s_20130109-104044_SD.
4. Deodexedofficial firmware for RecoveryG2s_20130306-143807_SD
5. Mirrorsfor firmwareG2S 20130109-104044 FT and G2S-20130306-143807 FT
6. March deodexedG2S 20130306-143807with the supportinit.dc January core and fullADB shell
7. March,deodexedfromsghif.
8. Virgin backup of November firmware G2SC 20131108-210351
Modified firmware based on the drain
Modified firmware fromflexomen: G2S-4-1-2mod2.4 and earlier versions(updated post).
Modified firmware fromrusomatroso: G2S-z0.44 and G2S-z0.45(updated post).
Modified firmware fromsantax: G2S 20130306 SantaXMod v1, Mod v2, Mod v2.1andMod v2.2 (updated post).
G2S 20130109 SantaxMod v1 with Aroma Installeras well as a small updateG2S 20130109 SantaX Mod v1.1
Coded firmwareupdateG2s_4.1.2.USVPortByX-DronfromX dronfrom a friendly forum.
DeodexedStlugafirmwaredeodexed_updateG2s_4.1.2.USVPortByX-Dron
Releasenew versioncombination firmware G2S_mix.Lepi_v2.5
Updated build G2S_mix.Lepi_v2.5.1
Updated buildG2S_mix.Lepi_v2.5.2
Updated firmwareG2S_mix.Lepi_v2.5.3
Spanish firmwarewith a corrected Deep Sleep and a replacement patch for the January core fromkrest-finn
Spanish firmwaresigned_CWMG2S20140112-000001
Modified November firmwareG2S_4.1.13_nov_by Lepi_v1.0b
Release of the modified November firmwareG2S_03_14_nov_by Lepi_v1R
LeWa OS firmware
FirmwareLeWa OS(off site)
burgerz_deodexed_LeWa_Jiayu_G2S_JB_ROM_13.07.19fromrage2000.
Russian version DEVLeWa from 08/02/13fromrage2000
Modified LeWa G2S SantaX Mod v2.0fromsantax
Russified LeWa 13.08.23based on langpackViNNNtalikfrom 08.23.2013fast oddis
TransferLeWa_Jiayu_G2S_JB_ROM_13.11.08_3wtxayfromqweeps
Translated Lyova (stable)deodexed_LeWa_Jiayu_G2S_JB_ROM_13.11.28_engfromzagsergej
Updated LeWa deodexed_LeWa_Jiayu_G2S_JB_ROM_13.12.06_GB.zipfromzagsergej.
StableLeWa Jiayu G2S JB_ROM 1/14/10 stablefromzagsergej.
LEWA 3/14/21fromurix2003
LEWA 04/14/04fromurix2003
LeWa_Jiayu_G2S_JB_ROM_14.04.25_urix2003
LeWa_Jiayu_G2S_JB_ROM_14.04.25fromzagsergej
LeWa_OS5 05/14/09fromurix2003
LeWa_OS5 06/14/13fromurix2003
LeWa_OS5 06/14/19 Stablefromurix2003
LeWa_OS5 07/14/04fromurix2003
LeWa_OS5 Stable 07/14/31fromurix2003
Ported MIUI
TranslatedMIUI bz_MIUI_V5_G2S_13.09.08fromoddis
TranslatedMIUI bz_MIUI_V5_G2S_13.09.08fromoddiswithworking contact sync, correction frombadulik
Dvuhsimochnaya MIUIfromzagsergej.
UpdatedMIUI from 11/11/13 JiaYu_G2S_MIUI_3.11.8_GBfromzagsergej
UpdatedJiaYu_G2S_MIUI_v5_3.11.16_Aromainstalfromzagsergej
UpdatedJiaYu_G2S_MIUI_v5_3.11.22_Aromainstalfromzagsergej
Updated MIUI JiaYu_G2S_MIUI_v5_3.11.29_Aromainstalfromzagsergej
PortedMIUI_JiaYu G2S_3.12.27fromzagsergej
PortedMIUI_JiaYu G2S_G2S_4.1.3fromzagsergej
MIUI_JiaYu G2S_4.1.17_ARMport fromzagsergej
PortMIUI_JiaYu G2S_4.2.28fromzagsergej
PortedMIUI_JiaYu G2S_4.3.24fromzagsergej.
MIUI_JiaYu G2S_4.4.7fromzagsergej
MIUI_JiaYu G2S_4.4.25fromzagsergej
UpdatedMIUIup to version 4.5.9fromzagsergej
UpdatedMIUI 4.5.23fromzagsergej
MIUI_JiaYu G2S_14.06.27fromzagsergej
Two fresh firmware: LolliFox1.9.1_G2SandMIUI-4.10.27_G2S
Ports from other phones.
Port with Orro phone firmware.
Port with Orro phone firmwareoption fromVlad31211.
Port xperia deodexed_JiaYu_G2S_4.2.2_Xperia_ADBfromzagsergej.
Ported firmwareunder GALAXY S4S4_UI_JiaYu_G2S_4.2.2fromzagsergej
Ported firmware JiaYu_G2S_4.2.2_port_HRM422_viperminifromzagsergej
PortedJiayu G2S 4.2.2 XPERIA modfromzagsergej
PortJIAYU G2S Note3perezalit withNEEDRom
OPPO Color ROM Betaport fromzagsergej
Acer Liquid E3_Jiayu G2Sfromzagsergej
Xperia vredniiy & porom mod 3.2.1
CuCla Jiayu_G2S 4.2.1_24.08.2014fromzagsergej
Jiayu G2S 4.1.2 XperiaLite RC2 by MiX5236
New versions of Android
Recovery
I remind you. Flashing a smartphone, you do everythingat one's own riskand no one for your actions and "dexterity" of handsnot responsible!
If you have installedmoderation (CWM)do not try to enter the menu"Settings Restore and reset"and return to factory settings. Will receive cyclic reboot!
Those who have not read these lines and received a cyclic reboot are recommended to installfactory (stock) recoveryaccording to the installation instructions in the section"Instructions"

And one more "Achtung"from a friendly forum from a branch"Universal instructions for firmware MT6575 / 77 devices":
"Amendment to all the instructions for the firmware that you read or still read: Sewpreloaderanddsp_blneed only in the case of lifting bricks! In all other regular updates and flashingIN NO CASEdo not put inFlashtoolthese ticks andDO NOT include formattingbecause You may have problems that you will not be able to cope with at home or it will be difficult to do. The mindless flashing of these sections is absolutely useless and very risky, especially on the platforms MT6575 and MT6577 "- the end of the quote.
Want to ignore the warning is your own business.
Factory Recovery
CWM Recovery 6.0.1.5
CWM Recovery 6.0.2.8[/ color] fromsantax
CWM Recovery 6.0.3.2fromsantax
Recovery TWRP v2.4.4.0fromsantax
Recovery packfromsantax
TWRP_ v.2.5.0.0_G2Sfromsantax
Updated mod CWM Recovery 6.0.3.2_G2Sfromsghif
Updated mod TWRP Recovery 2.4.4.0_G2Sfromsghif
Updated mod TWRP Recovery 2.5.0.0_G2SfromLepi
TWRP 2.6.3.0fromporom
Drivers and Utilities
Drivers. The executable file (.exe) may not suit everyone.
Another set of drivers. Put manually according to the instructions in the spoilerInstructions .
Drivers for Win 8x64
Universal Drivers from ma-min
One more driver kit from santax
MT6577_Android_scatter_emmc
SP_Flash_Tool_v3.1304.0.119
SP_Flash_Tool_v3.1308.0.125
SP_Flash_Tool_v3.1312.0.139
SP_Flash_Tool_exe_v3.1316.0.150
New FlashtoolSP_Flash_Tool_v5.1352.01
AdbPlugin for TotalCommander - Access to phone file system and not only. For work to be enabled " USB debugging ".
Batnik for create patches from michfood .
A new version flasher . Removed error in case of inconsistency PMT section in the phone and file scatter ( Error 8038 )
Boot and shut animations
Patches and modifications
Attention! Patches are not all universal! Before installing the patch, read what firmware it is suitable for. Moreover, there are patches that improve one function, but kill other functions that are familiar to you. In extreme cases, if in doubt, it is better to ask the author or in the forum. Successful update!
Optimization of the system and functionality
Universal patches
1. CPU control script from Bumbon4ik
1aUpdated script from the same Bumbon4ik
2. Scriptto test supportinit.d
3. Advanced Settings Menu For Developers from santax
3. Extended menuPower from hartec to reboot when it hangs.
4. Savyol patchwhich lowers the trigger thresholdred diodewith low charge up1%only on official20130108 . What attracts a patch from Savyol, besides the red LED indication threshold when discharging (albeit without auto brightness), is also reassigning the green LED to blue for incoming messages (sms, mail).
5. Patchat the camera from Amoi N820 as amended santax (corrected tags to Exif displayed JIAYU_G2S ).
6. Patch and rollback on camera from santax
7. Patch from santax for re-marking the internal memory of the phone.
8. Patch from Lepi to delete the search string Google from the desktop Android.
9. Patch from Lepi for replacing the kernel with the January support init.d through the recovery.
10. Patch from Lepi to replace the kernel on March with the support init.d through the recovery.
11. Patch from hatrix for replacement uboot in January in the fight against jitter.
12. Patch from hatrix for firmware radio module from THL W3 and roll back to its native firmware.
13. Script to set the frequency 500MHz when disconnecting the screen from sghif
14. Script from sghif as amended xatrix limits the frequency of the processor in 250 MHz when the screen is off.
15. Mutenotification upon receiptUSSD response from sghif
16. Reducing the threshold for the turbo mode (1200MHz) from sghif
17. Patchfromgdb417 For those who are concerned about the stupidity of the wheelbarrow.
18. Patch from sghif . Notification diode during charging.
19. Patch on camera and gallery from sghif . Video 15Mbps audio AAC-ELD (96kbit / 44100Hz) , fixed sound lag when shooting fullscreen gallery in portrait orientation.
20. Saving system sounds and vibration feedback settings in standard sound profiles . Patch from sghif .
21. Patch on camera and gallery continued from sghif . ISO setting . Now the ISO is actually set.
22. Patchat the camera from hartec to control the release of the shutter through the volume rocker.
23. Patchlower thresholdreddiode on the March runoff and everything that is based on it from rusomatroso .
24. Camera libraries that remove the blue spot while maintaining sharpness.
Patches for LEWA OS
1. Power extended menu for LEWA OS from hartec .
2. Patch , allowing to lower the thresholdred diode(1%) forLewa os from hartec .
3. Patchflip2mute from rage2000 for firmware LeWa from 07/19/13 Lock in your pocket.
4. Patchfromrage2000 to display Full Name instead of IOF in firmware LeWa_Jiayu_G2S_JB_ROM_13.07.19
5. Patch from wirthq for replacement boot.img on LEWA OS from recovery.
6. January core optimized for the left from santax .
Patches for Lepi firmware
1. Patch from hartec on combined firmware, remove from the menu Settings the string Recovery and Reset .
2. Patchoncorrect auto brightness for Combo 2.1 Lepi
3. Patch from hartec , so that the battery statistics are not reset after a reboot for firmware Lepi
4. 4-button lockscreen for combomodes from hartec .
5. Patch that allows you to assigndifferent ringtones for different sim cards from Lepi . Only forG2S_mix.Lepi_v2.5
Patches for coke and deodex runoff
1. PatchfromStluga for firmware deodexed_updateG2s_4.1.2.USVPortByX-Dron . Replaces 7 volume levels with 15.
2. Patch from Stluga lidroid panel for deodexed firmware deodexed_updateG2s_4.1.2.USVPortByX-Dron
3. Disable battery discharge indicationred diode . + Auto-rotate in any direction . For March runoff from sghif .
4. Patcheson auto brightness and lower thresholdred diode on stock firmware 20130109and20130306
5.
Patches for MIUI
1. Patch from rage2000 to reduce the threshold LED for MIUI v5 (3.7.12) Beta 11
2.
Patches for flexomen and rusomatroso firmware
1. Patch from Lepi to delete a line Restore and reset from the menu Settings on firmware G2S-4-1-2mod2.4 flexomen .
2. Patch smooth automatic backlight brightness control in firmware flexomen .
3. Patch on auto brightness put only on G2S-z0.44 from rusomatroso
Patches for ported firmware
1. Patch setfromLepi for firmware deodexed_JiaYu_G2S_4.2.2_port_P770 (for camera, file manager and two cores with ADB shell)
2. Patch fromLepi allows you to assign different melodies to different sims and different melodies to a specific person for JiaYu_G2S_4.2.2_port_P770 .
3. Display in two lines of the list inContacts , at Call history , at Dialer , and dd / mm / yyyy instead mm / dd / yyyy patch from pakster for deodexed 4.2.2 Lenovo ports .
4. Corrected dialer for the port S4_UI_JiaYu_G2S_4.2.2 Jiayu G2S from zagsergej
Decorations and ease of use
Universal patches
1. Standard launcher with functioninglandscape mode from santax .
2. Patch to replace the logo when you start the phone from Santax .
3. Patch for MIUI wake up with volume key and change LED notification from santax .
4. How to change the standard display IOF on Full name in contacts
5. Full photo of the subscriber with an incoming call from savyol
6. Stylish black themesSMS, contacts, e-mail, calendar and corrected dialer from santax
7. Fashionbatteries with percentagesand catalogready batteries including for our phone.
8. 5 options for new wallpaperfor desktop fromLepi
9. Patchcleaning volume change sound from hartec for various mods
10. Patches on flashlightfor any firmware from hartec
11. Modifications interface from MiX5236 here and here " a la SGS III " also.
12. Duplicate the link from the spoilerInstructions . Font replacement in Android
13. Patch from Lepi to display a report on the received SMS on stock deodexed firmware.
14. New versiongraphic patch TouchWiz5 from MiX5236 .
15. Turn on the flashlight by simultaneously pressing two volume keys when the screen is off. Patch from sghif.
16. Switch panelLidroid power widget in the shutter combined with standard switches from sghif
17. Switch PanelLidroid power widget in the blind instead of the standard switches from sghif .
18. Black themessmsms with a modified interface. Patch from Lepi .
19. Patchfromgdb417 to display a full-screen photo with a tap on the contact name (standard white themes)
20. Quick actions in the notification of the received message, as well as the button to delete the message in the text of the message.Patch from sghif
21. Patch from sghif which everywhere removes the gray triangle from the contact icon.
22. Patch from Lepi for stock coded firmware, replacing in SMS application emoticons on the usual yellow round instead of green half-androids.
23. Multifunctional volume buttons:Flashlight, PLAY / PAUSE, NEXT / PREV, answer / reject call. Removed the call answer slider. Fixed display of photos and contact icons. more options from sghif
24. Multifunctional volume buttons and contact display. Continued. Updated record from sghif .
25. Caller option from wagoneed . Redesign and large fonts .
26. Clock, News and Weather, Film Studio with Android 4.2.2 from volkmax777 .
27. Caller option from wagoneed . Redesign and large fonts+ Ambiguous ergonomics of buttons andseparate ringtones for each SIM .
28. Reminder scriptdiodeAbout enabled WIFI from sghif .
29. Watch with Android 4.2.2 (stopwatch, timer) corrected version from sghif .
Patches for flexomen and rusomanroso builds
1. Patch for functionWake_upvolume rocker and extended PowerMenu in firmware flexomen
2. Remove function Wake_up volume rocker in firmware flexomen
3. Modified status bar for the G2S-z0.45 modfrom rusomatroso
4. Patchon firmware G2S-4-1-2mod2.4 flexomen - expands the menu Settings adds a choice battery icons and so forth
5. Double-headed patch for mod 2.4 flexomen , which makes the correct auto-brightness, adds a brightness slider to the curtain and showsany trafficin the blind
Patches for Lepi builds
1. Patch on combomod v1 v2 from hartec for ease of use flashlight
2. Patchon the brightness slider with a buttonAutoin the blind from Lepi for combination firmware v1 and v2
3. Patch for COMBOMODE 2.1 Lepi to viewany trafficin the blind
4. Patcheson the dialer for the combined firmware
5. Patchcall fromhartecforcombined firmware 2.1 and 2.2 and Not only
6. Patch from hartec for combo firmware, allowing you to enter directly from the curtain alarm clock and calendar
7. Modified curtain from hartec . Now long tap on the fast switches opens the corresponding settings .
8. Patch for combomodeson smsms in black topics with a report on received SMS in the form of a green envelope.
9. Curtain patches in firmware G2S-130109_mix.Lepi_v2.3
10. Patch fromhartec for firmware G2S_mix.Lepi_v2.5 allows control the frequency of the processor in the status bar
11. PatchfromLepi to display fullscreen photo when tapes on the name of the contact (transparent themes from the G2S_mix.Lepi_v2.5 firmware).
12. Color setting LED light when receiving notifications. Patch from hartec for firmware G2S_mix.Lepi_v2.5 and for LeWa G2S SantaX Mod v2.0 .
13. Patch based on experience sghif to remove a triangle from avatars in the contact list for firmware G2S_mix.Lepi_v2.5
14. Clock on the center for Lepi 2.5 from MiX5236 .
15. Patch fromLepi on turning on the flashlight with two volume buttons for assembly G2S_mix.Lepi_v2.5.1 .
16. PatchfromLepi fixing font color in mailer attachments Gmail
17. Patch setfor firmwareG2S_mix.Lepi_v2.5.3
Patches on LEWA OS
1. Dark themes for LEWA OS
2. Dark bluethemeforLewa os. Two options: with a transparent curtain and no.
3. Lewalauncher with a choice of application categories and Lewa antivirus worker for LEWA OS from hatrix .
4. Decoration on Lev (version 2.0 from santax) in the style of iOS6. For LEWA OS from MiX5236 .
5. Kernels - Pure EmeraldJanuary and March fromzagsergej for deodexed_LeWa_Jiayu_G2S_JB_ROM_13.11.28_eng and old Chrome 25.0.1364.169_1364169.apk
Patches for MIUI
1. PatchesfromLepi for JiaYu_G2S_MIUI_3.11.18_GB (from zagsergej ), decorating the notification bar with a picture.
2. Patch setfromLepi for JiaYu_G2S_MIUI_3.11.18_GB (from zagsergej ), changing the appearance of the dialer.
3. Modified BootfromLepi for JiaYu_G2S_MIUI_3.11.8_GB giving full ADB shell .
4. PatchesfromLepi for new JiaYu_G2S_MIUI_v5_3.11.16_Aromainstal , translation zagsergej
Patches for ported KitKat
1. Patch from Lepi to replace the system font in the firmware Kitkat .
2. Modified ContactsfromLepi for firmware Kitkat .
3. PatchfromLepi , eliminating the problem of loxcreen alignment for firmware Kitkat with a translucent background in the settings.
4. PatchfromLepi removing the "funeral" triangles in the contacts of the firmware Kitkat
5. PatchfromLepi , eliminating the problem of loxcreen alignment for firmware Kitkat with black background in settings.
6. PatchfromLepi to replace boot.img c full Adb in firmware Kitkat .
7. PatchfromLepi , to select the battery icon in Settings with a black background.
8. PatchfromLepi , to select the battery icon in Settings with a translucent background.
9. Patch forimprove the work of the wheelbarrow for firmware android 4.2.2 by zagsergej from evil.realist
10. Patch from Lepi for firmware KitKat_by_SlimHouse_v2_G2S implementing in the Settings \ Display menu selection system fonts.
Patches for deodex and odex stock
1. Patch pack from Stluga (lockscreen for firmware X-dron , dialer and SMS)
2. Updated versionlockscreen for firmware deodexed_updateG2s_4.1.2.USVPortByX-Dron from Stluga
3. Cumulative patchfor deodexed drain fromwagoneed
4. Patches for March runofffromsghif . Included is the landscape mode of the standard lunch, as well as in the portrait mode, the names of the labels in two lines.
5. Updatedcumulative patch from wagoneed
Returning standard features and applications
Habitual gugloservisythat are missing in some mods.Manualinside the archive.
Standardapplications (calendar, contacts, smsms, gmail) for deodexed firmware.
Patch for replacing black SMSMMS with standard ones for firmware flexomen
Patch for replacing black SMSMMS with standard ones for firmware rusomatroso
Separate patches for replacing black themes with standard ones Calendar, Contacts, SMSMC
Patch installation deodexed stock browser
Patches to install default wallpaper collectionandupdated collectiondesktop wallpaper.
Patchfor returndefaultfonts for those who did not like graceful in firmware Lepi and santax
Rollbackfor patch on flashlight from hartec for firmware 2.4 flexomen
Patchrecoveryvoice search on combo firmware
Patch that cancels the wake up phone volume rocker on firmware G2S-130109_mix.Lepi_v2.3
Patch from Lepi For those who do not like the brightness slider in the curtain above the notification bar in the firmware G2S_mix.Lepi_v2.5 .
Patch to remove the function of turning on the flashlight under the lock with a long tap on the button Home in firmware G2S_mix.Lepi_v2.5 .
Restore battery statistics reset function when rebooting for firmware G2S_mix.Lepi_v2.5.x from Lepi .
Patch on the curtain,cleaning brightness slider for firmware G2S_mix.Lepi_v2.5.1 (v2.5.2) from Lepi .
Recovery Patchstocklogo.bin from pakster
Patch including USB debugging in case of breakdown of the wheelbarrow.
Hardware and software settings
Secret Codes
Digital code to enterFactory Mode *#59#
Digital code to enterEngineering Mode (Engineering menu) * # * # 54298 # * # * without Mobile Uncle (MobileUncleTools)
Entrance to the engineering menuLeWa OS : *#*#3646633#*#*
Digital code in order to learnIMEI : *#06#
Digital code to enterInformation menu *#*#4636#*#*
Informationaboutchip internal memory
Hidden menu"For developers "
Sound settings
Audio Setup through Engineering Mode (Engineering menu)
Another optionsettingsAudio from the branch Discussion
ANDanother optionfrom the same thread
GPS settings
Let's agree on GPS terms
GPS - Global Positioning System (Global Positioning System) provides navigation satellites for measuring time and distance.
A-GPS - A system that allows you to significantly reduce the cold start time of a GPS receiver. In order to reduce the cold start time and the system was developed Assisted-GPS , which allows you to download the necessary data from the server of the operator providing this service. If your cell phone is not A-GPS , then the determination of the initial coordinates will take several times longer ( 0.5 - 2 min ) than in the presence of such a system ( 10 - 20 seconds ).
EPO - (Extended Prediction Orbit) Analogue [by function] technology A-GPS - developed by the company MTK , loads data into the device with a satellite position forecast for 30 days. [A-GPS - downloads each time before use, EPO - loads before use and works for 30 days] Hot ( Hot ), Warm ( Warm ) and Cold ( Cold ) start. The “start†time required by the navigation receiver to determine the position after switching on depends on the initial information stored in the memory. The following modes are highlighted: “Cold†start (“auto searchâ€) - time, position, almanac and ephemeris unknown “Warm†start - position and ephemeris are unknown, time and almanac are known “Hot†start (“re-captureâ€) - almanac, ephemeris are known , time and position are known with some error.
MTK ICs: MT6620 combo chip used in the platform MTK 6575/6577 . responsible for the work GPS and other interfaces.
MT6628 chip performing similar functions MT6620 , has some differences for the better.
Incredibly Detailed Guide on setting GPS
Additionto this "Incredibly Detailed Guide"
Manualon improving GPS performance on MTK 6575-6577
Possible problems with the antennaGPS on related apparatus .
My humble GPS tuning experience
Method 1. All the manipulations were done on stock March and on mods fromrusomatroso and flexomen . First, I copy using RutExplorer gps.conf for Russia in the folder systemetc with the replacement of the existing one.
1. DisableGPS, EPO, A-GPS .
2. Delete the filemtkgps.dat in the catalog / data / misc (using the same RootExplorer). The file may not be on the newly installed firmware.
3. I reboot the phone. I turn on the Internet (WiFi or 3G (GPRS) depending on the possibilities). I go to Location Data Settings put a tick " Access to my location "and to the question" Allow tracking? "answer" Do not accept ". You can and allow the" big brother "to know more about you, here to choose. Then tap" GPS satellites "mark" GPS Assistance Data (EPO) "and" A-GPS ". I click" EPO Parameters "click" Autoload "and waiting for downloading satellite position data.
4. I go out into the open space (On the street, in the garden or the vegetable garden). 5. Enable in settingsGPS, EPO, A-GPS .
6. I enter the engineering menu (MobileUncle Tools or a combination * # * # 54298 # * # *), choose Ygsp (on the fourth tab, scroll to the right). To bookmark Information I press Full then Cold then A-GPS restart. Go to the bookmark Sattelites - and wait for the signal to be fixed in accordance with the red dots on the map, that is, some of the points should "turn green" (it can take from several minutes to tens of minutes).
6. I quitYgsp and engineering menu. Everything.
However, for exampleflexomen claims that in versions of android above 4.0 gps.conf supposedly not needed. Maybe. But we are talking about speeding up the first search for satellites in order to further GPS worked more efficiently.
Do not forget to update over timeEPO periodically, because The position of the satellites varies slightly. This method turned out to be much more effective for me than with the help of the program. faster gps .
Method 2. Over time, in my "bag" there was another way to configureGPS . I did not invent it, but I will describe it in detail. Tested on mods santax and flexomen and recommended for use for me personally. You can not use if you consider this shamanism. So. I shake all the same gps.conf and throw everything in the same folder systemetc with the appointment of rights. Delete all the same file /data/misc/mtkgps.dat if he was there. I download the patched library libmnlp and throw it in a folder systemxbin I assign rights to the letter P like neighboring files.
By the way, if after rebooting and trying to configuregps file mtkgps.dat appears again, it means the patched library did not work due to your rights assignment error or for another reason.
Further. Loading databaseEPO as described above. Reboot. I go to Engineering menu and then perform the same steps that were described above. As practice has shown, this method turned out to be even more effective for me than the one described earlier.
Method 3. Now after publicationAGPSUtility from hartec Both previous methods are suitable except for the development of useful experience. He's, as you know, "the son of difficult mistakes ..."
Another way with friendly forum
ProgramAGPSUtility from hartec able to improve customization GPS
Disable fast boot
By many users, after the firmware you need to immediately SettingsSpecial features disable " Fast boot ". Many programs that require root may not work correctly. For example, Skype . If a full system reboot is not done, he does not want to work adequately.
Attached Image

Remedy for a caller when an application stops responding to outgoing calls
Board ofenergy saving improvement
Polls archive
Attached Image
Attached Image
Changes in the cap

Posted 04/09/15
  1. Two fresh firmware:LolliFox1.9.1_G2S and MIUI-4.10.27_G2S . Firmware Ported MIUI.
  2. Jiayu G2S 4.1.2 XperiaLite RC2 by MiX5236 . Firmware Ports from other phones.

Posted on 08/24/14
  1. CuCla Jiayu_G2S 4.2.1_24.08.2014 from zagsergej . Firmware Ports from other phones.

Posted 08/21/14
  1. LeWa_OS5 Stable 07/14/31 from urix2003 . Firmware LEWA OS.

Posted 08/10/14
  1. deodexed_G2S_vredniiy & porom_xperia_v3.2.1 published by zagsergej . Firmware Ports from other phones.

Posted on 07/27/14
  1. Xperia vredniiy & porom mod 3.2.1 published by zagsergej . Firmware Ports from other phones.

Posted on 07/17/14
  1. Acer Liquid E3_Jiayu G2S from zagsergej . Firmware Ports from other phones.

Added 07/06/14
  1. LeWa_OS5 07/14/04 from urix2003 . Firmware LEWA OS.

Posted on 07/04/14
  1. Mirrors for official firmware. Firmware Official.

Added 07/07/14
  1. MIUI_JiaYu G2S_14.06.27 from zagsergej . Firmware Ported MIUI.

Added 06/26/14
  1. LeWa_OS5 06/14/19 Stable from urix2003 . Firmware LEWA OS.

Posted 06/20/14
  1. CaTsDroid_Jiayu G2S from zagsergej . Firmware New versions.

Posted 05/06/14
  1. LeWa_OS5 06/14/13 from urix2003 . Firmware LEWA OS.

Posted 06/06/14
  1. New FlashtoolSP_Flash_Tool_v5.1352.01 . Drivers and utilities.

Posted 05/29/14
  1. UpdatedMIUI up to version 4.5.23 from zagsergej . Firmware Ported MIUI.

Posted 05/21/14
  1. Update manualSuperSU on G2S_03_14_nov by Lepi_v1R from PaVliQ_BassMan . Instructions and Mini FAQ.

Posted 05/13/14
  1. UpdatedMIUI up to version 4.5.9 from zagsergej . Firmware Ported MIUI.

Posted 05/12/14
  1. LeWa_Jiayu_G2S_JB_ROM_14.05.09 from urix2003 . Firmware LEWA OS.

Posted 05/03/14
  1. Portedzagsergej Baidu v6 4.2.1_G2S_en . Firmware New versions.
  2. Updated script control processor fromBumbon4ik . Patches and modifications. Universal.

Posted 04/29/14
  1. New patches for camera and memory card display fromLepi for ROM ADRIANMM2 Jiayu G2S 4.2.2 V.6.6 in the description of fashion. Firmware New versions of Android.

Posted on 04/04/14
  1. LeWa_Jiayu_G2S_JB_ROM_14.04.25 from urix2003 . Firmware LEWA OS.
  2. LeWa_Jiayu_G2S_JB_ROM_14.04.25 from zagsergej . Firmware LEWA OS.
  3. MIUI_JiaYu G2S_4.4.25 from zagsergej . Firmware Ported MIUI.

Posted 04/25/14
  1. New patches fromLepi for ROM ADRIANMM2 Jiayu G2S 4.2.2 V.6.6 in the description of fashion. Firmware New versions of Android.

Posted 04/23/14
  1. Renamed and reloaded firmwareG2S 4.2.2_a`la_KitKat _mod Lepi . Now it is called ROM ADRIANMM2 Jiayu G2S 4.2.2 V.6.6 . Firmware New versions of Android.

Posted 04/22/14
  1. Opened a new vote on the firmware. Cap. Raise your eyes!
  2. SupplementedMiniFAQ about odex-deodex. Instructions. We agree on terms.
  3. Fixed and reloadG2S 4.2.2_a`la_KitKat _mod Lepi . Firmware New versions of Android.

Posted 04/20/14
  1. Modified firmwareG2S 4.2.2_a`la_KitKat _mod Lepi . Firmware New versions of Android.

Posted 04/11/14
  1. PortedMIUI_JiaYu G2S_4.4.7 from zagsergej . Firmware MIUI.

Posted on 04/07/14
  1. New patches forG2S_03_14_nov_by Lepi_v1R and for G2S_mix.Lepi_v2.5.3 . Firmware Modified.

Posted 04/05/14
  1. LEWA 04/14/04 from urix2003 . Firmware LEWA OS.

Added 04/02/14
  1. PortedMIUI_JiaYu G2S_4.3.24 from zagsergej . Firmware MIUI.
  2. OPPO Color ROM Beta from zagsergej . Firmware Ports from other phones.
  3. PortJIAYU G2S Note3 perezalit with NEEDRom . Ports from other phones.




K
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling the caps, temporarily contact the section moderators via the "Complaint" button under the messages to which you want to add links.


Post has been editedvaalf - 31.01.17, 22:07
Reason for editing: navigator
Lepi
Message#2
03.02.13, 17:06
status quo
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 5029
Check in: 08.02.11
Pocophone F1 6/64

Reputation:-  3061  +

Instructions
1. Instructions for entering the recoveryon new lots of phones October-December release.
2. Andanother onefrom the same basket.
3. Instructionfromdrsson inclusionROOTin firmwareLEWA OS.
4. Calibration proximity sensor.
5. Video lessonsfromLepi"for the little ones". Video from YouTube removed because of stupid comments. Tired of reading insults.
6. Unitexperience of work recovery tach. Requires confirmation.
7. Instructions from Nitr0zzWin8x64 firmware usingFlashtool
8. Firmware manualLeWa OSthankPridexx
9. Universal instructions for firmware MT6575 / 77 devices
10. Replacementfontsin Android
11. Fighting the trembling tacha. User Experience urix2003.
12. Instructionfirmware incompatibleROMwith a memory chip in your phone.
13. Instructions forCWMandTWRP,Titanium backup.
14. Full FORMATJIAYU G2S
15. Shuamefirmware onAndroid 4.1
16. How to replace system apk
17. How to connectadb-plugintoTotalcommanderand work with him.
18. MIUI instructions: Sim selector- convenient application not only forMIUI
19. Easy wayformulatedalkor575757to deliverRecoveryon stock firmware.
20. Instructionto save tach fromskirilyonok
21. The way to get backup nvram.imgon stock firmware. Actual for beginners before starting to sew in different fashion.
22. Ways to clean the systemcomputer from a different junk in the registry after connecting a variety of devices in the USB ports.
23. Manual SuperSU updateonG2S_03_14_nov by Lepi_v1RfromPaVliQ_BassMan
Ways to get Root
If, God forbid, your phone came rightless (noRootrights), there are several ways to ensure its administrator rights.
1. One user experience from our branch,suffered by him personally.
2. A way to getRoota little easier. DownloadingRoot. Next, install the driversadb. Then unpack the archive in any place (for example, desktop). RunRunMe.bat, entrance"1"that is, chooseNormal(normal mode) and clickEnter. A menu will pop up on your phone and ask you to save a backup,agree!The phone restarts, does not pull outUSB. After the reboot, there will be another recovery and again will offer to reboot, after that the rights of the superuser will appear.
3. Finally, the easiest way is advisingsantax. To installTWRP 2.4.4.0(Under the spoilerRecoveryin the cap). It automatically determines ifRoot, and if not, then offers to install.
4. Instructionfromdrsson inclusionROOTin firmwareLEWA OS.
Manual for useCWMfor beginners
First, takeCWMany version for example6.0.2.8. I suppose there is no big difference in the interface, and anyone can see the nuances himself.
First, the entrance to the recovery on our animal is carried out according to the following algorithm:
When the phone is off, press the volume rockerUPand, without releasing it, press the power button (Power). Hold until the boot logo appearsJiayu(flower). You can press at the same time, if possible, only suddenly you have the power button pressed a split second earlier, and the phone boots into the system, and you wondered why it was impossible to enter the recovery. And according to my algorithm one hundred percent hit. Next, a menu is loaded, in which the choice of the smallest font in two lines:
[Recovery Mode]
[Normal Boot].
SwingUPselects the desired line, rockerWAY DOWNentry into one mode or another. That is, when the selection arrow is opposite the top line, pressing the rockerWAY DOWNwill lead in recovery. PressingUP- will transfer to the bottom line and, accordingly, by pressing the rocker down, get the download into the system. If you are not confused, go ahead.
Attached Image
So, we entered the treasured menu. We see the lines in order:
1. reboot system now- it is clear that to load the system.
2. install zip from sdcard- Install the update or patch, which lies on the memory card at the root.
3. install zip from sideload- most likely install the update viaAdbfrom the computer.
4. wipe data / factory reset- erase data \ reset to factory settings.
5. wipe cache partition- clear the main cache partition.
6. backup and restore- backup and restore.
7. mount and storage- mount partitions and media.
8. advanced- extended menu.
Attached Image
On the menuadvancedthere is also a submenu:
1. reboot recovery- it is clear that to restart the recovery.
2. wipe dalvik cache- clear the cache of the Java virtual machine Dalvik, which is used to launch applications.
3. wipe battery stats- reset battery status for calibration.
4. report error- you know yourself.
5. key test- check the wheelbarrow.
6. show log- you know yourself.
7. partition sd card- kill sections of the memory card, and create new ones.
8. fix permission- assign permissions to execute files in system folders.
I think more we do not need.

So. All the same volume rocker select the desired menu item recovery. For example, we need to install a modified firmware, instead of the annoying stock. Download the firmware, put it in the rootSDcards. Now you need to make a backup of the system in case of recovery. Suddenly, the firmware will not like it or it will get crooked. Select the menu linebackup and restore, press the power button to enter the submenu. Here we select the linebackuporbackup to external sdcarddepending on where we want to put the backup. It is better to choose a backup to an external card, if you are sure that it is reliable. On the memory card in the folderclockworkmod \ backupImmediately draw a filenamed creation datebackup. You can rename if you want.
Attached Image

Next, clickGo backand return to the first menu. Here we select the lineinstall zip from sdcardenter the file selection submenu and select the firmware we need, knowing, of course, its last name, for example,G2S-4-1-2mod2.4.zip. To simplify the process, it is better to rename the firmware and other updates to a simple name.update.zip.
So. We chose the right name, press the power button and patiently wait for the full firmware. Upon successful completion, we return to the main menu and do all the necessary wipes, according to the instructions for the firmware.
Then go back to the main menu and clickreboot system now. Patiently waiting for the system to boot completely,without touching tachu, literally before turning off the screen (in sleep). For our beast is critical. Calibration of the wheelbarrow occurs during the first boot of the system, so an attempt to rush is fraught with glitches of the wheelbarrow.
Exactly patches and rollbacks are also installed by modifying something in the system. The difference is only in the number of wipes.
The restoration takes place according to the same scenario, the only difference is that we choose notbackup, butrestore from external sdcardenter the backup selection menu and select the file namedby datebackup. If you do not remember, write down when you made a backup.
That's actually the whole manual. Where is more detailed. By the way, the menu items and their decoding may slightly not correspond to the truth. It depends on the version of the recovery and my humble experience, sinceCWMI did not sit long, I know moreTWRP. But that's another story.Lepi.
Manual on working with touch recovery TWRP for beginners
Recover from Team win I like it more, because it has more features and more convenient functionality. Simply put, you can poke your finger, and not run along the lines of the volume rocker. You can flash this recovery not only through Flashtool but also through MobileUncle Tools (Mobile Uncle), which makes life easy for beginners.
Log in to the recovery as well as in the case ofCWM by pressing UP volume rocker with power button. Here the menu looks like big keys (buttons) and is controlled by pressing a finger on the buttons. I paint the buttons and their value on the example TWRP 2.4.4.0 because I like it more than 2.5 . Taste!
Attached Image
It is clear that the installation of patches and kickbacks, updates, firmware by pressing a buttonInstall . Next, select the name of the archive file to be installed, and the update or rollback may not only be in the root SD cards, but also in its other folders.
Nearby is a buttonWipe . Pressing it, we enter the submenu for clearing caches and formatting partitions.
Attached Image

ButtonCache - clears the main system cache.
Dalvik cache - clears virtual cache Java Dalvik machines .
Factory Reset - resets to factory settings.
System - clears the partition Data .
External storage - formats your card SD . Dangerous thing for inadvertently pressing. True, when you press any button, the recovery asks for confirmation of actions. You can confirm only by sliding the lock slider to the right.
Internal Storage - format the internal memory of the phone. Useful when flashing to a completely new mod based on a different core than the firmware that you are tired of and therefore you are changing.
Android Secure you can not press because Factory Reset Already make this wipe, as well as some other wipe (cache, Dalvik cache). We return to the main menu.
ButtonBackup Clearly lead us to the backup submenu. Moreover, here you can also stupidly make a backup, named date, or you can make a backup with your own special name, so as not to confuse later on when restoring the firmware.
Attached Image
The screenshot shows how the file of your future backup is named using the pop-up keyboard.
ButtonRestore allows us to restore the previous firmware from the list of backups that we created. And TWRP creates backups on SD map in folder TWRP \ BACKUPS \ G2S_MT6577T . From there we make the choice of the file to restore the system.
Attached Image

ButtonMount allows you to mount system and other partitions and media so that we can enter, for example, in the folder system \ app for executing the system using Aromamanager built into file manager recovery. You can also mount the device as USB drive when connected to a computer.
ButtonReboot leads us to the reboot submenu where you can reboot the recovery, turn off the phone and boot into the system.
ButtonAdvanced leads to a submenu of seven buttons, tired to press.
Attached Image

CopyLog to SD - it is clear that this button saves the log file to a memory card for finding errors in the subsystem by smart programmers and system administrators.
Fix permission - assign rights to files using combinations of numbers. It helps me when I forget to assign rights with Rutexplorer For example, some files from the system folder framework responsible for the interface. As a result, the system hangs after a reboot. You have to go to this submenu, having pre-mounted the section System through the button Mount , and assign rights to the files that I forgot about, hurrying, as always, due to the nature of the character.
Partition sd card - as in the case of CWM allows you to kill sections of the memory card, and create new ones.
File manager - this is the one Aroma Manager which lets us into all sections of the phone's memory, which we managed to mount in the previous menu. Here we can select a file and do whatever we want with it:
Copy - copy file
Move - move file
Chmod 755 - set 755 permissions (as with all system files)
Chmod - set any other access rights
Delete - delete a file
Rename file - rename file
Terminal command - allows you to execute a terminal command in the style of commands Adb in your chosen directory.
Never used it for advanced command line lovers.
In fact, this recovery is so "smart" that I do not have enough words and time to describe everything. I think that this is not necessary. I described the most used buttons as I could, and a more detailed description can be found in the Internet.
As for the firmware mods and officialROM for SD I personally do this. I do not pretend to be the ultimate truth. Surely there are more experienced flashers, let them also write instructions, there will be something to compare and make a choice.
I work throughTWRP 2.4.4.0 . I copy the archive with the firmware to the root SD . I go into the recovery, I make a backup of the system just in case. I call the backup with a pre-understandable name for me, I confirm with the blocking slider of my action. Everything, the backup has flown to the right folder, you can be calm for a possible rollback if I don’t like the future firmware or, God forbid, it will not work correctly.
Now I make wipes in a circle. These are my personal preferences, so you may not follow them. Follow the instructions for your chosen firmware and make a complaint to me then there is no reason. So wipes:Cache, Factory Reset, System, Dalvik Cache and Internal Storage just in case for loyalty. Remember: I have scalded with milk, now I am blowing water.
Next, go back to the main menu and clickInstall , I select the firmware file, with a slider I confirm my actions and patiently wait for the firmware to be poured into the phone's memory.
The screenshot shows the recovery process, but externally it does not differ from the firmware process, except for the inscriptions reflecting this or that operation.
Attached Image

During the firmware periodically pops up the lock lock from accidental clicks, you can remove the lock to monitor the progress of copying. Interestingly, when it finally flooded! Sprung inscription"Successfully" testifies to the successful completion of the process. If during the firmware the inscription jumped out "Failed" In red, there is a problem. Or the archive is broken or the firmware at least does not match your phone. There may be more reasons, but that's another story.
So the process was successful, doing the necessary wipe. Someone recommends wipe againCache I make it easier. Wipe Dalvik Cache and Reboot System .
Also waiting patientlywithout touching tachu , full load of the system until the phone goes to sleep, then I wake up, for example, with a volume rocker (this feature is on some mod-firmware) and set it up for my further preferences. Lepi.
Instructions on firmware from zk9663 from a friendly forum.
Attention! The instruction has been edited (claims are accepted).
If you don't haveuninterruptible power supplythen you risk getting temporarybrickwhen turning off electricity during flashing throughFlashtool .
We put drivers
(0a) .Preparation
For examplewin7x64 . Tested on a freshly installed, fully working OS.
In the application:
(Drivers_g2s) - All the necessary files for the firmware process + all drivers. Unpack It is desirable to place in the root of the diskWITH or another place but without Cyrillic characters and Chinese characters in the folder path .
ATTENTION !!! For your further actions no one is responsible. You have to decide for yourself: WHAT, HOW and, above all, WHY do it. If you are not confident in yourself, do not start.
(1a). Installing USB drivers
Connect the included, work phone to the computer via USB. The installation of the drivers will start automatically. All drivers except one (Adb ) stand up normally. The remaining device is Adb we slip the driver from the folder Android_Phone_usb_driver . Turn off the phone.
(2a). Installing the MTK preloader driver
Training. Open onDesktop window Device Manager . In another window, open the folder \ g2s \ USB VCOM Driver \ Win7 (from archive). Copy the path to this folder (to the clipboard).
Installation: Turn off the phone connected to the computer. A new device is detected in the tray.MTK preloader ........ We look at the device manager. As soon as a new device appears there, right-click on it and -> update driver --> from the specified location -->(paste the link from the clipboard) -> OK . This needs to be done quickly. If you did not have time in the device manager View / Show hidden devices then calmly upgrade.
Everything. Drivers are installed. Close all windows.
p.s.
If complications or fails -
Alternative ways
Sew recovery
(3a). Installation recovery
Many are quite happy with the recoveryCWM . We sew it.
Method 1>>>>>================================ Using a USB flash drive ================ =======================
Start the flash unit from the folderSP_Flash_Tool_v3.1304.0.119 (having previously downloaded the tool from the link from the header) ( Right mouse button-->Run as administrator ).
-one. If in lineDownload Agent empty choose MTK_AllInOne_DA.bin from the same folder with Flash_tool.exe
-2 In lineScatter loading and select the file MT6577_Android_scatter_emmc / txt (from archive Drivers_g2s attached to the section Training )
-3. We put only one tick oppositeRECOVERY
-four. Next, click on the word itselfRECOVERY and in the window that opens, select recovery.img (or another name) from any unpacked folder with the recovery you liked.
-five. PressDownload
-6. Turn off the phone (pre-distort or remove the battery) connected to the computer via USB.
--- The process of installing the recovery will begin (3-5 seconds). If a window with a green circle appears, then everything is fine. If not,
maybe some kind of error, turn off the body, distort the battery, restartFlashtool and repeat all 6 points.

Method 2>>>>>================================ Via Mobile_Uncle_tools ================ ===============
Copy toSD .img file any, like the recovery, rename to recovery.img . Run ModileUncleTools (Mobile Uncle) , tap on the line Update recovery , we find a string with the name that appears recovery.img , tap on it and immediately
You will be prompted to enterRecovery . We agree with the irreversibility of change.

(4a). Login to the recovery
Hold down the keyVolume Up and "Start" at the same time we wait until the selection menu appears:
a) inRecovery
b) inOS
Volume Up switches the cursor between these two items. "Volume down" - means choice. We enter the recovery. It was a rewarding experience.
Flashing process
(1b). We do wipe to
We go into the recovery and do:
-1. Wipe Data / Factory Reset .
-2. Wipe Cache Partition .
-3. Advanced - Wipe Dalvik Cache .
-4. Mounts and Storage - Format System .
In order to avoid problems, before any firmware, it is recommended to make wipes. If you, for whatever reason, cannot enter your existing recovery, then you need to change the recovery
according to clause[3a] and do wipe.
(2b). Installing firmware from under the recovery CWM + features LEWA
This is the easiest way. The stock (factory) firmware exists in 2 variations: under the recovery and under the flashlight. But a series of firmware fromLewa There are only under the recovery. The most important thing is not to confuse when you shake.
-----------------------------------------------------------
| Little about featuresLewa
| ... worth noting that the original firmwareLewa only sewed from under LEWA Recovery . That is from under CWM sew will not work.
| There is a way to eliminate incompatibility (discussionhere). It should be noted that it is necessary to do throughnotepad ++ but not Wordpad .
| And yet, in the same script, you can delete the line, resulting in the Chineselewa recovery should not be prescribed at all.
| Thus: You can flashLewa through any recovery, plus get rid of the process of subsequent recovery recovery.
| And who wants to can even flashLewa recovery continue to work through it, but must remember that Lewa recovery for G2s so far only with Chinese characters.
| Details in the subjectMods and Russification Lewa OS
-----------------------------------------------------------
////// So, make your choice? Throw the firmware in.zip format on SD phone card. This is usually done before the wipes, with the phone running. But if the system is already wiped, it doesn't matter either. We take out the card from the body, insert it into some kind of card reader or other device and copy the necessary file.
We enter the recovery.
Install zip from sdcard-->happy zip from sdcard - choose the folder with the firmware and the firmware itself--
>Yes-install_xxxxxx ->
waiting for the end of the installation process.
Important !!!: In order to avoid any kind of surprises and non-docking, as soon as the installation process is completed, without leaving the recovery, we make Wipe Dalvik Cache.
* Reboot . Do not touch the touch-screen until the system is fully loaded!
* Customizable
FlashTool Firmware
(3b). Installing firmware using SP Flash Tool
The method is more difficult but more reliable. Download the desired firmware with a prefix, for example_FT .
Unpack. Place preferably in the root of the diskWITH or another place no cyrillic characters in transit . You can in the folder with the files for recovery.
We start the flash unit according to paragraph3a =>>Method 1 .
-one. PushScater loading and select the file MT6577_Android_scatter_emmc (!!! from the folder with the firmware) .
Make sure that all the ticks on the left are set. If you do not want to change the recovery, then check boxRECOVERY do not celebrate.
-2 PushFirmware-upgrade (in case the firmware is completely flooded. since this process uses full control over the firmware: placing partitions by data in MBR, EBR and scatter -files + counting cheksumm, if such are present). If flashing partially selected items, for example, only boot.img or recover y, then we press Download .
-3. Turn off the phone (pre-distort or pull out the battery) connect to the computer.
--- I went to the process of installing the firmware. A window appeared with a green circle? It means everything is OK.
Next, you must immediately enter the recovery and makeWipe Dalvik Cache .
Firmware factory (stock) recovery
Almost no different from the firmware of any recovery through FT .
Start the USB flash drive (Right mouse button-->Run as administrator) from folderSP_Flash_Tool_v3.1304.0.119 (having previously downloaded the tool from the link from the header) or a more recent version, if available.
-one. If in lineDownload Agent empty choose MTK_AllInOne_DA.bin from the same folder with Flash_tool.exe
-2 In lineScatter loading and select the file MT6577_Android_scatter_emmc.txt (from archive Drivers & Tools_g2s created by one of the victims of cyclic reboot)
-3. We put only one tick oppositeRECOVERY if it is not already installed automatically.
-four. Next, click on the word itselfRECOVERY and in the window that opens, select recoveryG2S.img From the unpacked folder from the recovery.
-five. PushDownload
-6. Turn off the phone (pre-distort or remove the battery) to connect to the computer throughUSB .
--- The process of installing the recovery will begin (3-5 seconds). If a window appears withgreen circle, it means everything is OK.
If not, maybe some kind of error, turn off the body, distort the battery, restartFlashtool and repeat all 6 points.
Translation of stock (Chinese) recovery into English
Sometimes it is necessary to use stock (factory) recovery in a new phone out of the box. I personally tried to solve the Chinese characters, one day it even turned out to attain results by typing. Now everything is easier. Under the link of the user "zagsergej" I post pictures with the translation.
Attached Image. Attached Image. Attached Image. Attached Image. Attached Image.Attached Image
Instruction fromzagsergej battery calibration
Observe everything that is written here - for calibration loses all meaning.
1) In any way, completely discharge the battery - until the device turns itself off. On the last breath (2-3%), we remove the backlight as much as possible, turn off the sims, Bluetooth and everything that consumes the battery. We are waiting for the phone to turn off. Then we try to turn on the smartphone a few more times (one was enough for me, because the phone didn’t turn on completely) - so that the battery is completely discharged. Waiting time any. 2) We connect the regular charging (or similar), and NOT including the smartphone - we fully charge the battery. Why not including that battery resources are not wasted simply and there were no "pauses". As well as charging will happen faster. At the end, we see a green indicator 3) Turn off the charger and remove the battery for a couple of minutes. Do not want to open the lid - wait a bit. 4) Insert the battery back, reconnect the included charger. NowNOT DISABLED charging from the smartphone, turn it on. 5) Wait until the body is loaded. CHARGER DEVICE DO NOT DISCONNECT !!! For when booting, the system will slightly discharge the battery, and we need a full one. 6) Run any file manager - in our case it is RootExplorer, and delete the same file with battery calibration data: data / system / batterystats.bin. Fear not: when restarting Android, it will re-create this file, but already with other data we need! Previously, I had the size of 47 kb, with the new creation I became 2 kb, after fully charging and discharging I recovered to 24 kb. You can also delete a file using: a) Battery Calibration . b) through Recovery menu. 7) Well, the last stage - when we show the full 100% We restart the device again, and only after the Android is fully loaded - the charger can be disconnected.
Did IMEI fly after unsuccessful firmware?
Before this can occur, it is recommended to save a backup IMEI to the memory card. To do this, install Mobile Uncle (MobileUncleTools) and on the first tab click IMEI Backup Restore (MTK). Then you can restore it as you like. However, if IMEI is still gone, then Repair IMEI .
Useful experienceHARDMAX on recovery IMEI
For novice experimenters
For those who like to experiment, especially not very experienced, I would advise when replacing, for example, any .apk In the system folder, do not delete the old one, but simply rename it temporarily, so that in case of a rollback, do not look for the deleted one apk -shku and restore its rights. For example, I want to replace setting.apk in folder system \ app on the modified. Getting in Rutexplorer om in the right folder, tap in the top right corner to switch Rw on RO , that is, set the folder permissions to change files, then I make a long tap on my native setting.apk I choose Rename and add to the extension, for example, apk minus (-) or plus (+), it turns out setting.apk- , the application icon immediately changes to indefinite. Then paste the copied previously modified apk and assign her rights, for example, the letter R in this case.
File permissions assignment option
Attached Image
If after rebooting and testing I didn’t like something, I delete the modified application and return the original name to my native one, removing the minus (-) from the extension. Rights toapk-shki after renaming, thank God, they have not changed, so without further gestures I reboot the system and live calmly until the next experiment. This method is particularly relevant to replace, for example, framework / res which is fraught with major problems with the system interface, even if you have not yet logged out from Rutexplorer in the process of renaming and replacing a file. Then, in the case of a rollback, you can boot into TWRP and built-in file manager ( AROMA ) rename the native application and delete the modified one. Actually, I have been using this way for a long time, because experience is, after all, "the son of difficult mistakes ..." Good luck! Lepi .
Replacement Instructions framework-res.apk
Copy to SD modified framework-res.apk . Backup old framework-res just in case in the backup folder. Then copy the new one. framework-res.apk to folder / system / and assign rights 644 letter R - rw-r - r-- . We can not copy the file directly to the folder framework since this is a critical file that is responsible for the interface, so we use an intermediary - a folder system . "Full" now file from folder / system / we copy in / system / framework with replacement. The device itself should reboot. I did not have this happen, apparently the replacement was almost equivalent. I rebooted forcibly, no dependencies.
We are trying to revive the "brick"
Sometimes, after various experiments with firmware or for some other reason, a smartphone turns into a dead "soulless object", in our words, a brick. On contact with PC don't go Flashtool especially does not want. What to do? Toss out? Give "pioneers" to the study of "internal organs"? Smart people advise, not immediately.
In the most common case, it is necessary before connecting toPC On the phone, hold down the camera button. If it is not known in advance, before opening the phone and looking for TP , you should try to connect the phone with all possible combinations of the clamped buttons on the phone. Known models in which, before connecting to PC It is necessary to hold down the volume down key. Well, if these manipulations did not help, then there is hope to revive it using the so-called test points .
Test point This is a contact on the board that gives access to the internal bootloader, flashed directly into the chip. Detailed interpretation of the term under the spoiler Mini FAQ .
1. Technique of TP search . For safe search TP it is necessary to close the intended TP on the case (minus battery power) through a resistor resistance from 100 before 1000 ohm .
Closing an unknown point directly without a resistor can lead to phone failure!For convenience, you can still use a piece of thin wire in isolation and a needle to securely hold in place of the intendedTP . Usually TP on the board is placed on a technological round platform with a diameter of about a millimeter. For example, you can see photos already found TP other phones . I have not yet seen our "beast" in that collection.
So let's go! OnPC We turn on the sound so that you can hear the moment of connecting and disconnecting devices. We take out the battery from the smartphone and in turn check the response to the closure of each of the supposed TP : - closes the intended TP - connect the cable USB to PC . For convenience, this is done in four hands. If there is no sound connecting the device, remove the cable and repeat the operation with another point. If we hear the sound of connecting the device, then go to PC at device Manager and make sure that in the section Ports appears MTK Usb Port with PID_003 . Select on the port Properties->Intelligence->Equipment ID and should be USB \ VID_0E8D & PID_0003 .If an unknown device with such PID appears in the section Other devices then you need to install the drivers and make sure that the device starts to appear in the ports.
2. Preloader and DSP_BL firmware . You can sew without battery. We start the flash drive, select the scatter in the folder with the firmware, leave the daws only on Preloader and DSP_BL (at first we sew only 2 of these blocks in one session), we press the button in the flash drive Download closes TP and connect the cable to PC . When the red stripe runs, TP can be unlocked. We are waiting for the end of the firmware. All other blocks are usually sewn without TP . If there is an error with their firmware BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054) , most likely the preloader does not fit this phone.

Here islink useful experience of using this method from the branch G2

BUThere Already have the experience of reviving our phone from the state of the brick.
Additionalinstruction now experienced user miclk .

One moreuseful experience to restore the "brick" from the topic G4

Mini FAQ. Additional Information.
Russian manualAndroid 4and bonus drivers
1. Agree on terms
Theme in the work, please help ...
In addition to the Glossary:
Padonkaffsky , or “Olban†Yezig or Yazyk Padonkaff
- the style of using the Russian language that spread in RuNet at the beginning of the XXI century with phonetically almost correct, but deliberately incorrect spelling of words (so-called errative), frequent use of profanity and certain cliches characteristic of slang (although habits are so strong that ", Without noticing it, correctly bowed the words - Zacheg, Zacheg ... - and as a result, phonetic fidelity is lost in many cases). Most often used when writing comments to texts in blogs, chat rooms and web forums. Slang spawned many stereotypical expressions and Internet memes, in particular, they associate the melody "preved" with it. Wikipedia
Remindin our forum"Olbansky" tongue is prohibited . The official language of the forum is Russian .
Core
The kernel is part of the operating system, and it is not only Android, but also other operating systems: Windows, iOS, MacOS, and others. But we will be interested in the Android kernel, and what I will try to explain at the level of novice users.
The Android kernel is the most important part of the operating system, which is responsible for the interaction between the hardware and software part of the device. The kernel consists of a set of drivers for all the hardware present in the device, and a subsystem for managing memory, network, security, and other basic functions of the operating system.
The kernel manages absolutely all the equipment: Wi-Fi, Bluetooth, GPS, memory and other devices. There is no exception and processor. The kernel can control its frequency and power supply.
The stock core is optimized by the manufacturer for a particular device, but it usually blocks such important core functions as, for example, CPU frequency control. And if you need to overclock the processor of your device, you will need to change the kernel to a custom one, in which the frequency control function of the processor is unlocked.

Here is a sample list of features that custom kernels give us:

Changing the frequency of the processor over a wide range;
Overclocking graphics subsystem (GPU);
Reducing the frequency and voltage of the processor, which allows for a longer battery life;
More recent and high-quality drivers, such as accelerating the work of the GPS or adding new features;
Ample opportunities for setting and configuration of sound and color screen;
Support for alternative file systems (XFS, ReiserFS, and others).Info taken from 4Tablet-PC.
Firmware (eng. Firmware, fw )
“Firmware is the contents of the non-volatile memory of a computer or any digital computing device — a calculator, a cell phone, a GPS navigator, etc., which contains its firmware.
The word "firmware" is sometimes called the imageROM designed to write to the memory of the corresponding device in order to update its firmware, as well as the actual process of recording this image in the non-volatile memory of the device.
The memory is flashed when the device is manufactured in various ways - for example, by installing a memory chip with recorded contents (“stitchedâ€).
Most devices allow the replacement of the contents of memory ("flashing"). Methods of "flashing" can be very different - from the physical replacement of the memory chip to transfer data over wireless channels.Wikipedia
Smartphones These are essentially high-tech computers that have their own operating system and allow them to expand their functionality by installing additional and third-party software. So, the more difficult the smartphones become, the more potential places of occurrence of operating system errors that serve the smartphone and its hardware stuffing - especially in the new model of this or that device. A new firmware version for a smartphone, as a rule, corrects errors found at the time of its release, and also optimizes the work of already existing software and hardware parts of the smartphone (for example, the camera starts to shoot better, memory leaks disappear, sometimes additional functionality appears, etc. P.). Therefore, when a developer releases a new firmware, it is almost always worth updating it in your device.
What does ROM consist of?
preloader (~ 0.25 MB.) - preloader. It connects the phone with FlashTool in "USB mode" for firmware, and also ensures the launch of the device. Presumably loads uboot into RAM and transfers control to it.
dsp_bl (~ 0.75 Mb.) - A little-known thing. Judging by the name of the processor firmware. Damage it turns the phone into a tablet without communication. What then firmware do not flash the phone wireless networks will not work. Solution: flash working dsp_bl. (Only MT65x3, MT65x5, MT65x7!)
nvram (~ 3.0 MB.) - stores iron calibrations, IMEI, BT and WIFI MAC addresses and more. Mount point / data / nvram.
seccnfg (~ 0,125Mb.) - an unknown thing, usually contains only the emptiness "FF FF ...".
uboot (~ 0.375 MB.) - operating system loader + drivers for initialization of the main equipment (display, processor, GPIO).
boot (~ 6.0 MB.) - kernel and operating system drivers (cameras, sensors, sensors). Mount Point.
recovery (~ 6.0 MB.) - mini-system (system in the kernel) whose function is only to backup / restore system applications, reset to factory settings. In advanced recovery, the functionality is of course much richer.
secstatic (~ 1.156 MB.) - sec_ro, what is needed is not clear, nothing happens when erasing on Android 2.2.1 and 2.3.5. On Android 2.2.2 (mostly at Fly-ying), this section takes up a good piece of ROM and it has Google services. Mount point / system / secro. File system yaffs2.
misc (~ 0.375 MB.) - Unknown thing, usually contains only the emptiness "FF FF ...".
logo (~ 3.0 MB.) - The first picture when turned on, the picture is charging. At 95% contains only the emptiness of "FF FF ...".
expdb (~ 0.65 MB.) - Unknown thing, usually contains only the emptiness "FF FF ...".
system (~ 160-210 MB.) - Android system section. Here everything that relates to the functioning of the device, from the "muzzle" to the supported functions of the operating system. Everything that changes here is not subject to restoration by factory reset. Mount point / system. File system yaffs2.
cache (~ 62.0 MB.) - section for the location of temporary files. Typically used by applications (Market, ROM Manager ...). With the loss of the contents of the section, the functioning of the system will not suffer. Incorrect content may cause a hang when loading the device. Fully erased at factory reset. Mount point / cache. File system yaffs2.
userdata (~ 220-290 MB.) - data, this is the section for installing calendar programs, telephone sets, profiles, settings for various programs and systems. When the contents of a section are lost, the system usually does not suffer. Incorrect content may cause a hang when loading the device. Fully erased at factory reset. Mount point / data. File system yaffs2.

If you have problems with your phone, do not rush to flash it. First, perform a full reset fromrecovery . How to do this depends on the version of your recovery.
If you were tinkering with RootExplorer or deleting system programs, then we only need to fixsystem and do a reset via recovery. There is no need to sew anything else. From this "more factory phone will not." From inept actions he can become more brick.
* 99% of problems come down to the fact that users install third-partylauncher and then delete the system launcher (as not needed). As a result, after a reset:
"Aw, after the reset, black screen and everything! Nothing works."
"Guard, after reset, I click on the icon of the robot (Wisard or Installation Wizard), but nothing happens!"
In this case, the options are:
Send yourself an SMS with a link to download / install a launcher (if you have internet access).
To installupdate.zip via recovery containing launcher.
Flashsystem.img into the phone.
Info taken from a friendly forum.china-iphone.ru author linerty from the "Creating a ROM dump and working with it (MT65xx, Android)". Perhaps she is a little worn out, correct, if something is wrong.
Scatter
The file in which the phone memory map is stored
Patch , or patch (eng. patch )
- information intended for the automated introduction of certain changes in computer files. Applying a patch is sometimes called “patching.â€
Patch or update eng.update is called, in particular, containing such information automated separately supplied software used to fix problems in the software or change its functionality.
The fix can be applied to an already installed program, or to its source codes. This includes fixing errors, changing the appearance, improving the ergonomics or performance of programs, as well as any other changes that the developer wished to make.
The size of patches can vary from a few kilobytes to hundreds of megabytes. In particular, very large patches can occur when changing or replacing non-program data, such as files with graphics and sound (often found in computer games). However, the large size may be caused by the large number of changes made. Moreover, the words “patchâ€, “patch†are usually used to denote small fixes, while large patches that seriously change or update a program are often called"Service pack" or "Software updates" . Wikipedia
Odex-deodex
System .apk files along with themselves have a “load†file with the same name and the .odex extension. With their help, presumably you can save some space. Deodexing means that you convert this .odex to .dex (the same file stored inside .apk) and put it back into .apk. This allows us to freely replace system applications without worrying about cokexes, but the main cause of deodexing was to do such an operation with the services.jar file, thanks to which you can change the colors of all texts (for example, the color of the clock from white to black, etc.) , and to deodex services.jar, you need to deodex all system .apk-shki. The craftsmen removed the .ODEX files from the firmware, writing the information contained in them into the APK files, thereby reducing the size of the firmware and most importantly - now the APK files themselves can be changed as you like, this does not affect the system’s work in a fatal way. This is called deodexing. This is good - in the deodexed firmware, you can easily open the APK file with the archiver, change the resources in it (pictures, etc.) and return the changed file to a place in the firmware. Than this is not very good - the process of working with such files slows down a bit, but it is not critical.
Boot.img
- The bootloader works like a Linux kernel: it can use an mboot-compatible bootloader (usually using patched syslinux), which supplies the boot-dfe .img file (for Linux users, it is known as a RAM disk or initrd), and the boot-dfe uses it to get kext / mkext files. (OSx86)
build.prop
On our smartphone in the folder system there is a file build.prop . This file contains information about the settings and firmware of the device, which are applied immediately after it is turned on.
If desired, you can edit this system file.
ro.build.display.id = XXXX. This line shows the name of the firmware build. You can see it in Settings-About phone-Build number . Value Xxxx You can change to your taste.
debug.sf.hw = x. This line is responsible for Hardware acceleration . It is needed to speed up the graphical interface. Value 1 it activates. Value 0 - deactivates.
wifi.supplicant_scan_interval = XXX . This line is responsible for the search interval. Wi-Fi networks. The default is 20 . The value is measured in seconds. Advised to save battery put value 200 .
dalvik.vm.heapsize = Xm . This line sets the value heapsize . VM Heap Tool - increase in the size of memory for applications. Experienced users say the value X better change to 32 .
dalvik.vm.execution-mode = int: XXX . This line is responsible for JIT . Value jit includes it, and the value fast turns off.
mot.proximity.delay = 150 . Increases the ability of the proximity sensor to respond. This line is not originally there, you need to write it yourself.
windowsmgr.max_events_per_sec = 60 . This parameter makes the interface more flexible and smooth. This line is not originally there, you need to write it yourself.
ro.product.model = XXXX Here instead XXX prescribed device model. It is useful for those who have some games refuse to start, due to the fact that the device does not fit. prescribe instead of your other model, for example, desire HD and the game starts ...
So, with the lines, it seems, sorted out. Now we need to learn how to edit them. If installedRoot explorer then open and go to the folder / system / . See below the file list below the folder list build.prop . Switch the top of the button R / W to R / O. Long tap on the file, opens the list of editing options. Choose Open in text editor (Open in Text Editor) . Well and then we edit.
But having an applicationbuild.prop Editor You can greatly simplify this process.
Use the programbuild.prop Editor very simple. After its launch, we see a list of parameters contained in the file. build.prop and can choose any of them to change its value. In addition, you can add new parameters to the file. In order for the changes to take effect, a system reboot is required.
Attention!Editing a filebuild.prop , you must clearly understand what this or that parameter means, otherwise you can seriously damage the performance of your phone!
ROOT
- Linux users know that root access rights are usually known, and for Windows users, it is possible to log in to the system as an administrator. In short, root rights give us the opportunity to do with the system everything that pleases: delete, edit, add files, including system files.
The list of opportunities that open to the user of the Android system, which has root rights:
Unlimited control over the system.
The ability to replace system files with which you can:
Change themes
Replace standard applications such as calendar, clock, mail program, etc.
Replace the system loader and the Recovery image for the ability to save and restore the system and replace the firmware.
You can add and change system applications, for example, with the busybox program, which allows you to execute almost all linux commands, you can replace the existing toolbox, which has a very limited set of commands.
Change images and animations that are displayed at system startup.
Run applications that give you more control over the system, such as SuperUser, which allows you to grant root rights to various programs, the Root Explorer, the file manager, which allows you to see and work with all the files on your device, unlike the standard file manager, Programs that allow delete and change any applications, including system and many more programs that make life easier for the Android user.
Make a backup of your system, including the programs you added and data that you can restore at any time after resetting to factory settings or updating the firmware
Move installed applications from phone or tablet memory to a memory card.
Transfer temporary files of the Internet browser and cache of various applications to the memory card.
Manage your device using a computer via USB or WiFi connection.
Busybox
Busybox essentially a set of console utilities Linux systems. Required, for example, to work app2sd or programs for overclocking or something like that that requires connecting third-party kernel modules. In most custom firmware it is already built. Read more here.
USB OTG (On-the-go)
- further specification expansion USB 2.0 designed for easy connection of peripheral Usb devices each other without the need to connect to PC . For example, a digital camera can be connected directly to a photo printer if they both support the standard USB OTG . To models of PDAs and communicators that support USB OTG You can connect some USB devices. Usually these are flash drives, digital cameras, keyboards, mice and other devices that do not require additional drivers. This standard arose due to the sharply increased recently need for reliable connection of various devices without using a PC.
When connected viaUSB OTG device rank (master or slave) is determined by the presence of a jumper to Plug ID in the wire. Wikipedia
BB - big Brother
- This is a computer or laptop with any internet connection.
Why do you need it? For example, the situation: you have access to the network via DSL, wi-fi is not, GPRS is too expensive. What to do? That's right, to connect a smaller brother to an older brother, in order to calmly update applications and follow Twitter through an android device.
You and meBB needed to transfer files from computer to smartphone and vice versa, as well as to assign rights to files copied to the system folders of the smartphone. This is done most conveniently through Totalcommander with installed plugin adbplugin . Well and the most important thing, perhaps, is the ability to flash the smartphone system completely or in parts using a tool Flashtoo l.
CWM
- is a system recovery utility (menu) that allows you to make full backup copies of the entire system of the device, install firmware, mods and much more on it.
Details aboutClockworkMod Recovery
TWRP
- advanced sensory recovery. Features version 2.5:
Graphic interface with full touch control.
Batch installation of patches (up to 10pcs in the queue).
Customizable backup / restore. You can choose which sections to backup / restore, whether you need to use compression and generate md5 sums, set your own backup names and delete unnecessary ones directly from recovery
Display time (time zone is configured separately), the battery charge.
Save recovery settings on the SD card.
Built-in Terminal Emulator.
The ability to connect both memory cards to the computer as USB-drives.
Built-in file manager with the ability to copy, move, delete, rename, change access rights.
Detailed log file.
Theme support.
The interface is streamlined.
Added the ability to create a backup IMEI partition. TWRP interface:
[attachment = "2823506: AgsV.png"] [attachment = "2823509: WujW.png"]
What is a Test Point?
Test Point (eng.test points - key points) - points on electronic equipment giving access to the software in case of a software or hardware error. In particular, the test points located on the mobile phone board allow you to record any information in the boot area.
These points can be of different modifications, for example, a track on the board, a specific contact, or a set of contacts. Usually, in order to change the boot part of the phone, as well as to modify the capabilities of the phone, it is necessary to “cut†the test point (that is, to close or cut it).
Test points are used to disable the internal loader.(bootcore) mobile phones, which by default do not allow someone else's bootloader into their firmware. After completing the procedure for disabling the bootloader through test points, it becomes possible to unlock a mobile phone (removing SP lock ), flashing the phone with damaged software or flashing the phone with new software.
For accurate and quick access to the test points on the board, special connectors can be used, which are superimposed on the disassembled mobile phone and connect the phone to a computer or an independent unlocking device. In addition to connectors, special test point cables can also be used, which are wires with needles of a certain thickness at the ends.Wikipedia

2. How it works
Theme in the work, please help ...

Q: How to take a screenshot?
A: Press "at the same time"volume down "and key" phone on / off "and hold until an animated snapshot appears.

Q: How to disablevibration when connecting / rebound?
BUT:Settings->Special abilities-> uncheck the checkbox Connected to vibration

Q: How to enter Recovery?
A: Hold the keyVolume Up and key "On off" at the same time we wait until the selection menu appears:
a) inRecovery
b) inOS
"Volume up "switches between these two points." Volume down "- means the choice. Click, enter the recovery.

Q: How to callTask Manager ?
A: Long key hold"House" / "Home"

Q: What is the status of the notification LED?
BUT:
Red - almost empty / charging
Hgreen - almost charged / charged / missed sms-mms, calls;
Blue - missed message events. (email, ICQ Skype, etc.)
On the modified firmware there may be differences in the color of the glow.

Q: Is it possible to connect a keyboard, mouse, USB flash drive, printer and so on to the smartphone? ?
A: No. PortOTG in our smartphone is missing.
Overview Information



Post has been editedfil - 10.09.15, 17:07
Reason for editing: manual new


--------------------
"Of all the arts, cinema is the most important for us ..."
as well as TWRP firmware and recovery modes for many devices
sergcheb
Message#3
03.02.13, 17:57
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 220
Check in: 12.03.12
Xiaomi Mi 6 6/64

Reputation:-  5    +

Well, it remains in the cap instructions with screenshots to throw;)
snsh
Message#4
03.02.13, 20:27
Old resident
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 448
Check in: 31.01.11
Xiaomi Mi Note 3 6/128

Reputation:-  54  +

OmTatSat @ 02/03/2013, 16:06*
Is the phone flash through flashtool?

I have not tried. Although maybe this trick

Post has been editedsnsh - 03.02.13, 20:29
HARDMAX
Message#5
03.02.13, 21:37
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 117
Check in: 15.01.13
PPTV King 7

Reputation:-  10  +

Snsh @ 02/03/2013, 5:30 PM*
Installed drivers, I take the scatter from the official firmware.

As an assumption. With G3, there was first a snag on the scatter. Then some helped the creation of his scatter.
Quote from the G3 theme from the tea background:
Creating a scatter file
On the phone, we enable "USB debugging" in the phone (Menu-Settings-Applications-Development)
On the PC, launch MTK Droid Root & Tool
We connect the phone to the PC (in the program on the first tab should appear information about the phone!)
Click "Block Map"
Click "Create scatter file"
(WITH)
iogannekb
Message#6
04.02.13, 06:19
Novice
***
[offline]

Group: Active users
Messages 45
Check in: 06.02.11
Jiayu G2S

Reputation:-  1  +

on G3 I use Lewa OS firmware. Really like. I wrote a letter to the developers, asking them to do it under G2S, they didn’t answer, but I think they know what needs to be done without me) Today I checked their official website, there is a firmware for our device !!!!http://bbs.lewaos.com/download.php
Are there understanding people who could be busy translating? I will try to submit myself ..

Post has been editediogannekb - 04.02.13, 06:27
flexomen
Message#7
04.02.13, 06:45
i'm a gangsta
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1765
Check in: 19.07.10
Samsung Galaxy S8 Exynos

Reputation:-  156  +

Today I checked their official website, there is a firmware for our device!

Judging Google Chrome transfer to G2S on February 6 should be LeWa ...
NikOle
Message#8
04.02.13, 07:14
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 50
Check in: 16.08.07
ZUK Z2

Reputation:-  6  +

Iogannekb @ 02/03/2013, 20:19*
under our device there is a firmware !!!!http://bbs.lewaos.com/download.php


To download the firmware from there, you need to register, especially in Chinese ... maybe someone has already registered and perezalёt on a shared resource? or at least give a direct link.
zk9663
Message#9
04.02.13, 10:06
Nubia z11
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 4012
Check in: 28.06.10

Reputation:-  306  +

The latest official firmware is dated (on the phone) 20130108 ????


--------------------
snsh
Message#10
04.02.13, 10:24
Old resident
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 448
Check in: 31.01.11
Xiaomi Mi Note 3 6/128

Reputation:-  54  +

The latest official firmware is dated (on the phone) 20130108 ????

Yes
snsh
Message#11
04.02.13, 15:42
Old resident
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 448
Check in: 31.01.11
Xiaomi Mi Note 3 6/128

Reputation:-  54  +

HARDMAX @ 02/03/2013, 20:37*
Connect the phone to the PC (in the program on the first tab should appear information about the phone!) Click "Block map" Click "Create scatter file"

Scatter did.
Moderation did not work out, again an error. You need to try to sew all the firmware flashlight

Post has been editedsnsh - 04.02.13, 15:44
zk9663
Message#12
04.02.13, 17:08
Nubia z11
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 4012
Check in: 28.06.10

Reputation:-  306  +

Who can chew and lay out the installation of this modified recovery in detail? And by the way, will we not lose the opportunity to put official updates in this case?

Attached files

Attached fileMT6577_Android_scatter_emmc.7z(360 bytes)


Post has been editedzk9663 - 06.02.13, 18:24


--------------------
snsh
Message#13
04.02.13, 17:10
Old resident
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 448
Check in: 31.01.11
Xiaomi Mi Note 3 6/128

Reputation:-  54  +

I stitched the phone with a flashlight, the moderation after that was also flashed without problems. There is no twitching of the screen at all!
Seeing the firmware through the update from the SD card is crooked.
snsh
Message#14
04.02.13, 17:24
Old resident
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 448
Check in: 31.01.11
Xiaomi Mi Note 3 6/128

Reputation:-  54  +

Who can chew and lay out the installation of this modified recovery in detail?

See the topic Talk. There everything is already chewed in detail
flexomen
Message#15
04.02.13, 18:14
i'm a gangsta
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1765
Check in: 19.07.10
Samsung Galaxy S8 Exynos

Reputation:-  156  +

snsh @ 4.2.2013, 16:10*
I stitched the phone with a flashlight, the moderation after that was also flashed without problems. There is no twitching of the screen at all!

This is already a great, encouraging news! Another thing would be to test the phone in heavy games or applications so that it warms up properly and check how the screen and the sensor will behave.
Denso
Message#16
04.02.13, 20:49
Guru
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 2083
Check in: 16.02.08

Reputation:-  79  +

under our device there is a firmware !!!!http://bbs.lewaos.com/download.php


no more !!


--------------------
AvicNET F900BT OWNICE C200 UNIJY-U135, Huawei / honor, Dreambox 900UHD, Kiii-Pro. Sony 55XF8505BAEP.
OmTatSat
Message#17
04.02.13, 21:14
do not hurry
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2123
Check in: 02.01.13
LG G2

Reputation:-  118  +

I stitched the phone with a flashlight, the moderation after that was also flashed without problems. There is no twitching of the screen at all!
Seeing the firmware through the update from the SD card is crooked.

And before that, they flashed with a sd card? Why did they change it with a USB flash drive?


--------------------
LG G2 F320S kitkat 4.4.2 CloudyStock 2.7
OmTatSat
Message#18
04.02.13, 21:59
do not hurry
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2123
Check in: 02.01.13
LG G2

Reputation:-  118  +

updated moderationAttached fileCWM_6.0.1.5.img(5.01 MB)


--------------------
LG G2 F320S kitkat 4.4.2 CloudyStock 2.7
OmTatSat
Message#19
04.02.13, 22:32
do not hurry
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2123
Check in: 02.01.13
LG G2

Reputation:-  118  +

Maybe someone knows who writes patches to the camera?


--------------------
LG G2 F320S kitkat 4.4.2 CloudyStock 2.7
zk9663
Message#20
04.02.13, 22:50
Nubia z11
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 4012
Check in: 28.06.10

Reputation:-  306  +

See the topic Talk. There everything is already chewed in detail

If onlysmog-Don't ask


--------------------
flexomen
Message#21
05.02.13, 01:12
i'm a gangsta
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1765
Check in: 19.07.10
Samsung Galaxy S8 Exynos

Reputation:-  156  +

Perezal firmware:G2s_20130109-104044.zip

Post has been editedflexomen - 05.02.13, 02:21
Jiayu
 

603 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 22:48