Acer Aspire V5-171 - Discussion | [notebook]



Rep: (29)
Discussion 11.6 "laptop Acer Aspire V5-171
Official site | In English | Download drivers | Download manual
Windows 8 пїЅ | Windows RT Software | Windows 7 пїЅ | Windows xp пїЅ | Ubuntu linux пїЅ | Change the operating system пїЅ | Search programs пїЅ | Antivirus пїЅ | Ambulance laptop owners пїЅ | IT smoker пїЅ
Attached Image
Technical description
11.6 "(1366x768) Acer Aspire V5-171 laptops belong to the V5 Series family, which also includes models with screens in 14" and 15.6 ".

All laptops are based on the Core i3 and i5 processors of the Intel Ivy Bridge platform with Intel HD Graphics integrated in the processor.
The operating system may be Windows 7 Home Basic or Windows 8 in 64-bit version.
The model is based on the chipset.Hm77 expressand comes with a minimum 4GB of RAM with one or two DDR3 memory slots.
The widescreen 16: 9 glossy display has LED backlighting, the laptop also has HDMI and VGA outputs.
As a drive, a 500GB Hitachi hard drive with a rotation speed of 5400rpm is used.
The main filling: SD / MMC card reader, bluetooth 4.0, Wi-fi standard 802.11 a / b / g / n, gigabit LAN and dual 3.5mm jack for headphones and microphone.
Due to the small volume of the li-ion four-cell battery with a capacity of 2500 mAh, the laptop is compact and lightweight: with dimensions of 28.448 x 20.32 x 2.794 cm, its weight is 1.379 kg.
Reviews and Reviews


Post has been editedShoore - 09.06.13, 01:10
Reason for editing: topic navigation bar



Rep: (4)
hadsman @ 04.03.19, 21:47*
win10 and it can be put?

I should at the outset release, there are no problems. But SSD me.



Rep: (23)
justwater @ 05.03.19, 00:59*
But SSD me.

I'm plugging the hard drive is not true memory 16 necessary, but it is unnecessary 8 enough. We were at the beginning of the problem with the updates. Now they are not corrected.



Rep: (11)
justwater @ 04.03.19, 21:59*
I should at the outset release, there are no problems. But SSD me.

vik1955 @ 05.03.19, 03:04*
I'm plugging the hard drive is not true memory 16 necessary, but it is unnecessary 8 enough. We were at the beginning of the problem with the updates. Now they are not corrected.


Gentlemen, as you have 32 or 64 bits ??



Rep: (4)
hadsman @ 05.03.19, 08:46*
Gentlemen, as you have 32 or 64 bits ??

64 bits, 8GB RAM. Home Win 10.



Rep: (11)
* justwater,
thankyou! then stick a top 10.

Posted 05/03/2019, 9:18:

* justwater,
another question. and the wood itself 10kA all set? it is necessary to download anything ???



Rep: (4)
* hadsman
To be honest I do not remember, long ago it was. But like diamonds I had to get. Although I put the same is not hewn Windu now that it has more or less brought to mind



Rep: (23)
hadsman @ 05.03.19, 12:17*
and the wood itself 10kA all set?


64 bit RAM 16GB. Home Win 10 1809 October. Mouse over bluetooth, Wi-Fi at 5GHz.
She puts everything, not long ago the screw flew from scratch put the activation of the digital signature is stored. The problem with the SD card reader, first runs then stops. Firewood reader and put away.
I Snappy Driver Installer more prog updated some of what the wood after installation.

Post has been editedvik1955 - 05.03.19, 09:51



Rep: (222)
Good day, gentlemen. There was a question on a subject: Having unlocked BIOS 2.17 have problems with it working in SATA SSD SATA II mode. Who can share BIOS version, which works as a SATA SATA III? Thanks in advance.



Rep: (72)
* homza That such an expansion BIOS? On the off site like a couple of firmware rolls

Post has been editedbeavisrom - 17.03.19, 16:22



Rep: (222)
* beavisrom above in the subject laid out 2.17 with SLIC 2.1 and open additional menus. Unfortunately, with a "new" version above 2.09 hard drive goes from SATA 3 to SATA 2. At the moment, it is critical to me, so there was a question of rolling back to 2.09 or an older version.



Rep: (23)
homza @ 17.03.19, 18:45*
Who can share BIOS version

Here's the latest.Attached fileBIOS_Acer_2.21_Windows.rar(6.78 MB)



Rep: (222)
* vik1955, did not read the post, goes on to say "which works as a SATA SATA III". 2.21 unfortunately have a controller mode SATA II: yes2:
screen
Attached Image


Post has been editedhomza - 17.03.19, 16:38



Rep: (23)
homza @ 17.03.19, 19:35*
2.21

This is the latest downloaded from the Acer website, you will not find another.



Rep: (222)
* vik1955, eg,
2.09
2.09 official. But it does not revert to a higher version of himself as from wind, and with flash by Fn + Esc.

Post has been editedhomza - 17.03.19, 16:50



Rep: (4)
* homza, it turns out that on firmware 2.09 SSD will run faster?



Rep: (222)
* justwater In the beginning of the topic to write - yes.



Rep: (1)
Lads, help out. Smoked topic, I realized that there are some xp installed. Need driver for xp (I am a conservative), can anyone have. Of. Site is 7-8 offers. Google, at random half set. Devices with a question for the strain.



Rep: (3)
People, V5-171-9620 model with i7 on board.
i7-3517U
16 gigs of RAM will be? and the heavy Photoshop files + lots of chrome otzhiraet became buggy system when it all started ....

In the written specification that holds up to 32 gigs .....

https://ark.intel.com/...he-up-to-3-00-ghz.html

Post has been editedVermin_sd - 05.04.19, 16:42



Rep: (23)
Vermin_sd @ 05.04.19, 19:38*
16 gigs of RAM will be?

I already wrote in my notebook Acer V5-171-53314G50ass worth a purchase.



Rep: (0)
People have Acer-V5-131. I understand it is an analogue V5-171. Mother bought from China with i3-3217u processor. Bios old Insyde EFI V1.05. And instead of the failed native matrix I'd like to put FHD matrix. I read user for_camry positions as far as I understand this is possible with a file in his hands.
for_camry @ 24.05.14, 09:48*
I decided not to wait for the connector, connector removed from the matrix and just soldered the wires to the board matrix.
All okazaols exactly as also believed to remove items marked on the diagram as the LVDS @ and place marked EPD @
Matrix of pin-soldered as usual during the nepropai with unusual for me to lead-free solder, which is still messy type neugadannogo resistors near the processor that is cut in eDP processor and so on.
and
for_camry @ 26.07.14, 09:35*
current plume soldering, on the side of the matrix completely replace the connector and motherboard from one contact HPD is necessary, because in his usual no template.

Those. mat.platu with the connector, we do not touch. HPD contact such as a scheme vpaen 30 pin connector on the motherboard, that is, provodchek need to solder the connector loop and bring the provodochek to the connector on the sensor. AND
for_camry @ 22.05.14, 14:33*
in our case, so to speak matrix ultranovaya, low 30pinovym connector and the type of eDP tires instead of the LVDS, so here or buy a loop from a beech thread with a matrix (I phoned the local boutiques parts - nowhere else loops), or I buy a socket, while generally not known in what form this terminal will come, perhaps to collect without spetsinstrumeta it will not work and will be soldered directly to the matrix.
These positions more in 2014, but now seems as aliekspresse sold all these trains. Do I understand correctly, you need to buy a cable and matrix FHD and everything should work? Or something that you need to do more? Please help me, please.) For a long time over this break down.) All Easter.)


Full version    

Help     rules

Time is now: 17/09/19, 22:26