[X]Assistant

[Uncle]

Talk smartphone firmwareHTC Windows Phone 8S
HTC Rio (HTC Windows Phone 8S / A620d, A620e, A620m, A620t)
Smartphone: Description | Discussion | Accessories | Purchase пїЅ
General: Ambulance for beginners пїЅ | OS FAQ | News Talk пїЅ | Windows phone club пїЅ | GPS navigation пїЅ
Firmware: General flashing questions | Firmware database | Creating and editing firmware пїЅ

The topic discusses the issues of firmware (official and unofficial, if any) for HTC Windows Phone 8S, the problems of these specific firmware, their shortcomings and other issues related to these firmware, the issues of their flashing, repair via Jtag (other similar equipment), and optimization of official firmware and the creation of unofficial firmware for these devices.

Utility for firmware:

• Links to firmware
  
• Instructions for flashing (MiniFAQ on firmware)
  
• Installing drivers for firmware.
  

Encountering firmware versions:

Utility for repair:

Additional utility:

• HTC support
  
• Jailbreak (unlock) on Windows Phone пїЅ (FAQ)
  
• Windows Phone - Programs
  
• Windows Phone - Games
  
• Windows Phone - Ornaments
  
• Windows Phone - Development and Programming
  
• Windows Phone - First Aid
  
• Update Windows Phone 8.1 (FAQ) / Preview for Developers (FAQ) discussing general issueshere пїЅ
  
• Windows Phone 10 Technical Preview Update We Discusshere пїЅ
  
• Memory menu item Other / Temporary files and its release are discussed.here пїЅ
  
• Questions on the SIM-Lock askhere пїЅ
  
• Talk memory cardshere пїЅ
  

Attention! Hereprohibiteddiscussion of issues that do not fall under the theme (Offtop),
including a discussion on the device itself, the system as a whole, firmware for other devices,
as well as the creation of messages that do not carry useful information (flood)!
Also try to avoid in your messages lyrical digressions and reflections on the meaning of life!
For open conversations we have the relevant sections.

_{On a note:}

Forum FAQ | How to search the forum? | 10 commandments novice | Selection and comparison of PDAs and smartphones
How to clean the image under the spoiler

Dear users, be mutually polite, say "Thank you" by increasing your reputation (). If you do not have 15 more useful posts, ask the moderators to raise their reputation by pressing the buttonunder the message of who helped you and who you want to raise your reputation.

And do not forget aboutForum RulesandRules section "Windows Phone - Firmware"! : rtfm:

Post has been editedUncle - 18.10.17, 10:16

Reason for editing: Editing caps

[kovalDN]

LINKS TO FIRMWARE:

Official firmware:

Model:

HTC Rio (RUS) download

References:

• RIO_U_APO_00_HTC_ENG_1.04.411.03_Radio_1.11b.3054.25_10.13.30
  Firmware info:

  Model: HTC Rio (Windows Phone 8S / A620d, A620e, A620m, A620t)
  Software: Windows Phone 8.X
  OS version:
  Firmware Version Number:
  Software Version: 1.11b.3054.25_10.13.30
  Bootloader version:
  ...
  • Mirror mega
    
  • A-ruu mirror
    
  • Mirror torrent tracker Tfile
    
  
  

Model: HTC Rio (Europe)

References:

• RIO_U_APO_00_HTC_Europe_1.04.401.03_Radio_1.11b.3054.25_10.13.30
  Firmware info:

  Model: HTC Rio (Windows Phone 8S / A620d, A620e, A620m, A620t)
  Software: Windows Phone 8.X
  OS version:
  Firmware Version Number:
  Software Version: 1.11b.3054.25_10.13.30
  Bootloader version:
  ...
  • Mirror mega
    
  • A-ruu mirror
    
  • Yadisk Mirror
    
  
  
• RIO_U_GDR3_00_MR_HTC_Europe_4.05.401.02_Radio_1.20.3054.27_10.27.30.54
  Firmware info:

  Model: HTC Rio (Windows Phone 8S / A620d, A620e, A620m, A620t)
  Software: Windows Phone 8.X
  OS version:
  Firmware Version Number:
  Software Version: 1.20.3054.27_10.27.30.54
  Bootloader version:
  (GDR3)
  ...
  • Mirror mega
    
  
  

Post has been editedkovalDN - 18.04.15, 09:45

Reason for editing: updated firmware links

[kovalDN]

MiniFAQ

Re-Flash Instructions:

Re-Flash Instructions:

General recommendations and warnings when flashing the device:

General recommendations and warnings when flashing the device:

• Attention: This material is unofficial, in case of unsuccessful software installation, breakdown or failure of devices, other undesirable consequences, the authors of the software, the authors of topics and messages and the Administration of the resource do not bear responsibility! Everything is done at your own risk!Before flashing - check!
  
• By flashing the device, all data on it will be cleared to the initial state for the corresponding firmware (the device will be reset to the factory state), so it is first recommended to use backup of your data.
  
• Before flashing the device, it is recommended to fully charge the device (its battery).
  
• In the process of flashing the device, do not try to disconnect the connecting cables and disconnect the device from the PC.
  
• Due to the possibility of power failures of the PC (its shutdown), it is recommended to use a PC with special backup (uninterrupted) power sources (including a laptop or similar PC) during the process of flashing the device, preventing the PC from powering off in the process of flashing the device.
  

Instructions for flashing the device with official firmware of your region (operator):

Instructions for flashing the device with official firmware of your region (operator):

For flashing the device requires:

For flashing the device requires:

• PC with the necessary software installed on it.
  
• The device itself.
  
• Standard microUSB cable included with the device (with microUSB-male connectors - USB-dad).
  
• Required corresponding to the device by region (operator) firmware (containing files directly firmware in the format "nbh" and ROMUpdateUtility flasher with executable files) with the extension ".exe".
  

The standard way to install the official firmware of your region (operator):

The standard way to install the official firmware of your region (operator):

1. Download on the PC the necessary corresponding to the device by region (operator) firmware (containing files directly firmware in the format "nbh" and ROMUpdateUtility flasher with executable files) with the extension ".exe".
   
2. Hold the "On / Off" button on the device on hold and turn off the device.
   
3. Put the device into bootloader mode, i.e. When the device is turned off, hold the "Volume +" and "Volume -" keys on hold, without releasing them to turn on the device by pressing the "Enable / Disable" button, and release them only when the device vibrates.
   
4. Connect the device to the PC through the connecting MicroUSB cable and wait for the necessary drivers to be installed on the PC (it is recommended that the driver update in the Device Manager settings on the PC be set to “Automatic” and the PC be connected to a functioning Internet) or install them on the PC manually. Note: After correct installation of the necessary drivers on the PC on the device screen in the bootloader mode (Bootloader), the inscription "Serial" should change to "USB"; the inscription "Serial" means that the device is not connected or incorrectly connected to the USB port on the PC and there is no connection between them, or the necessary drivers are not installed or installed incorrectly.
   
5. Launch the firmware on the PC (containing files directly in the "nbh" format and ROMUpdateUtility flasher with executable files) with the extension ".exe" on behalf of the Administrator and follow the instructions of the ROMUpdateUtility flasher: click everywhere the "Next" button and at the end, click on the “Update” button that appears, after which the device should be flashed and the progress bar on the status bar will be displayed as a percentage. Note: During the flashing process, the device may reboot one or several times; Do not attempt to disconnect the connecting MicroUSB cable and disconnect the device from the PC; After the device is rebooted, the further process of flashing it should start up again and progress on the status bar will continue.
   
6. The device can reboot at approximately 0-1% progress on the status bar. Note: If at this stage the device does not completely boot into Bootloader mode, as a result of which the further independent flashing process does not start, it is necessary to remove the connecting MicroUSB cable from the device during the device reboot and insert it only after bar on the screen.
   
7. Wait until the ROMUpdateUtility flasher displays the completion of the device flashing process on the PC, and then click the "Finish" button on the PC in the ROMUpdateUtility flasher.
   
8. After installing the firmware, the device should reboot and boot into the Windows Phone system. Note: After a reboot, the device may not boot into the Windows Phone system, but boot only up to the HTC splash screen or into bootloader mode.
   
9. Firmware installation is complete.
   
10. It is recommended or if the device does not boot into the Windows Phone system after the reboot, and only loads before the HTC screen saver or into the bootloader mode, hold the "Enable / Disable" button on the device on hold and turn off the device if the device does not restart to turn on the device the "Enable / Disable" button, when the HTC screen saver appears, hold the "Volume -" key on hold and release it only when an exclamation mark appears on the device screen, and then implement a device reset mechanism to the factory (Hard Reset), i.e. Press the "Volume +" key ->Key "Volume -" ->"Enable / Disable" button ->The "Volume -" key, after which the device should reboot and boot into the Windows Phone system. Note: If, after a reboot, the device continues to not boot into the Windows Phone system, then the device may be reset to the factory state (Hard Reset) again and / or several times; if this does not help, re-flash the device.
    
11. Hold the "On / Off" button on the device on hold and turn off the device.
    
12. You can disconnect the connecting microUSB cable and disconnect the device from the PC.
    
13. Turn on the device by clicking the "Enable / Disable" button and after downloading it to the Windows Phone system, use the device with the updated software version.
    

Alternative way to install official firmware of your region (operator):

Alternative way to install official firmware of your region (operator) (recommended):

1. Download on the PC the necessary corresponding to the device by region (operator) firmware (containing files directly firmware in the format "nbh" and ROMUpdateUtility flasher with executable files) with the extension ".exe".
   
2. Unpack the WinRar firmware (containing the files of the "nbh" format and the ROMUpdateUtility firmware with the executable files) with the extension ".exe" on the PC and extract all the contents (files) into a separate saved folder on the PC.
   
3. Hold the "On / Off" button on the device on hold and turn off the device.
   
4. Put the device into bootloader mode, i.e. When the device is turned off, hold the "Volume +" and "Volume -" keys on hold, without releasing them to turn on the device by pressing the "Enable / Disable" button, and release them only when the device vibrates.
   
5. Connect the device to the PC through the connecting MicroUSB cable and wait for the necessary drivers to be installed on the PC (it is recommended that the driver update in the Device Manager settings on the PC be set to “Automatic” and the PC be connected to a functioning Internet) or install them on the PC manually. Note: After correct installation of the necessary drivers on the PC on the device screen in the bootloader mode (Bootloader), the inscription "Serial" should change to "USB"; the inscription "Serial" means that the device is not connected or incorrectly connected to the USB port on the PC and there is no connection between them, or the necessary drivers are not installed or installed incorrectly.
   
6. Launch ROMUpdateUtility flasher on behalf of the Administrator on the PC from the folder with the extracted files of the unpacked firmware (containing files directly from the firmware "nbh" and the ROMUpdateUtility flasher with the executable files) and follow the instructions of the ROMUpdateUtility flasher everywhere: click the Next button ("Next") ) and at the end click on the "Update" button that appears, after which the device should be flashed and the progress bar on the status bar will be displayed as a percentage. Note: During the flashing process, the device may reboot one or several times; Do not attempt to disconnect the connecting MicroUSB cable and disconnect the device from the PC; After the device is rebooted, the further process of flashing it should start up again and progress on the status bar will continue.
   
7. The device can reboot at approximately 0-1% progress on the status bar. Note: If at this stage the device does not completely boot into Bootloader mode, as a result of which the further independent flashing process does not start, it is necessary to remove the connecting MicroUSB cable from the device during the device reboot and insert it only after bar on the screen.
   
8. Wait until the ROMUpdateUtility flasher displays the completion of the device flashing process on the PC, and then click the "Finish" button on the PC in the ROMUpdateUtility flasher.
   
9. After installing the firmware, the device should reboot and boot into the Windows Phone system. Note: After a reboot, the device may not boot into the Windows Phone system, but boot only up to the HTC splash screen or into bootloader mode.
   
10. Firmware installation is complete.
    
11. It is recommended or if the device does not boot into the Windows Phone system after the reboot, and only loads before the HTC screen saver or into the bootloader mode, hold the "Enable / Disable" button on the device on hold and turn off the device if the device does not restart to turn on the device the "Enable / Disable" button, when the HTC screen saver appears, hold the "Volume -" key on hold and release it only when an exclamation mark appears on the device screen, and then implement a device reset mechanism to the factory (Hard Reset), i.e. Press the "Volume +" key ->Key "Volume -" ->"Enable / Disable" button ->The "Volume -" key, after which the device should reboot and boot into the Windows Phone system. Note: If, after a reboot, the device continues to not boot into the Windows Phone system, then the device may be reset to the factory state (Hard Reset) again and / or several times; if this does not help, re-flash the device.
    
12. Hold the "On / Off" button on the device on hold and turn off the device.
    
13. You can disconnect the connecting microUSB cable and disconnect the device from the PC.
    
14. Turn on the device by clicking the "Enable / Disable" button and after downloading it to the Windows Phone system, use the device with the updated software version.
    

List of errors when flashing HTC

Instructions for flashing the device with official firmware from a memory card:

Instructions for flashing the device with official firmware from a memory card:

Original theme:XDA

Information note:

Information note:

• This method is a process of bypassing the device CID check, including if unsuccessful attempts to install official firmware of another region (operator) on the device due to the error "ERROR [294]: INVALID VENDOR ID", can fix the failed device flashing and cyclic restarts .
  
• This method most likely works with devices with any CID.
  

For flashing the device requires:

For flashing the device requires:

• PC with the necessary software installed on it.
  
• The device itself.
  
• Memory card for the device and a card reader for the PC.
  
• The required firmware with the extension ".exe", containing files directly to the firmware in the format "nbh" and the ROMUpdateUtility flasher with executable files, namely 2 files with the extension ".nbh":
  - the file "RUU_Signed.nbh" extracted from the necessary firmware unpacked by the WinRar archiver (containing files directly from the nbh firmware and ROMUpdateUtility flasher with executable files) with the extension ".exe". Note: in the testing process, files from official stock European and Russian firmware were used.
  - the file "UEFI_signed.nbh" extracted from the necessary firmware unpacked by the WinRar archiver (containing files directly from the nbh firmware and ROMUpdateUtility with executable files) with the extension ".exe". Note: in the testing process, files from official stock European and Russian firmware were used.
  

The method of installing official firmware directly from the memory card in the device:

The method of installing official firmware directly from the memory card in the device:

1. Download the necessary firmware (containing files directly to the firmware in the "nbh" format and ROMUpdateUtility firmware with executable files) with the extension ".exe" on a PC.
   
2. Unpack the WinRar firmware onto the PC (containing the files of the firmware directly in the "nbh" format, including the file "RUU_Signed.nbh" and the file "UEFI_signed.nbh", and the ROMUpdateUtility flasher with executable files) with the extension ".exe" and extract from there all contents (files) in a separate saved folder on the PC.
   
3. The file “UEFI_signed.nbh” copied from the folder with the extracted files of the unpacked firmware (containing the files of the firmware directly in the “nbh” format and the ROMUpdateUtility flasher with the executable files) was renamed to “RIOUDIAG.nbh”.
   
4. Format a PC memory card in FAT32 format.
   
5. Copy the file "RIOUDIAG.nbh" from a PC to a memory card.
   
6. Hold the "On / Off" button on the device on hold and turn off the device.
   
7. Insert the memory card into the device.
   
8. Enter the device into the firmware mode from the memory card, i.e. when the device is turned off, hold down the "Volume -" button and the "Camera" button on hold, without releasing them to turn on the device by pressing the "Enable / Disable" button, and release them only when the device enters the firmware mode.
   
9. Wait until the end of the process of flashing the device.
   
10. Firmware file "RIOUDIAG.nbh" completed.
    
11. After the end of the process of flashing the device, hold the "Enable / Disable" button on the device on hold and turn off the device. Note: At this stage, the device cannot boot into the Windows Phone system and after flashing the device may start to reboot constantly due to the absence of a stitched system, in connection with which subsequent actions may need to be carried out between the reboots.
    
12. Remove the memory card from the device.
    
13. The file "RUU_Signed.nbh" copied from the folder with the extracted files of the unpacked firmware (containing the files of the firmware directly in the "nbh" format and the ROMUpdateUtility firmware with the executable files) was renamed to "RIOUDIAG.nbh".
    
14. Repeat all steps 4 through 12 in sequence.
    
15. After installing the firmware, the device should reboot and boot into the Windows Phone system. Note: After a reboot, the device may not boot into the Windows Phone system, but boot only up to the HTC splash screen or into bootloader mode.
    
16. Firmware installation is complete.
    
17. It is recommended or if the device does not boot into the Windows Phone system after the reboot, and only loads before the HTC screen saver or into the bootloader mode, hold the "Enable / Disable" button on the device on hold and turn off the device if the device does not restart to turn on the device the "Enable / Disable" button, when the HTC screen saver appears, hold the "Volume -" key on hold and release it only when an exclamation mark appears on the device screen, and then implement a device reset mechanism to the factory (Hard Reset), i.e. Press the "Volume +" key ->Key "Volume -" ->"Enable / Disable" button ->The "Volume -" key, after which the device should reboot and boot into the Windows Phone system. Note: If, after a reboot, the device continues to not boot into the Windows Phone system, then the device may be reset to the factory state (Hard Reset) again and / or several times; if this does not help, re-flash the device.
    
18. Hold the "On / Off" button on the device on hold and turn off the device.
    
19. Turn on the device by clicking the "Enable / Disable" button and after downloading it to the Windows Phone system, use the device with the updated software version.
    

Instructions for entering the device in bootloader mode (Bootloader):

Instructions for entering the device in bootloader mode (Bootloader):

1. Turn off the device.
   
2. With the device turned off, hold down the "Volume +" and "Volume -" keys on hold.
   
3. Without releasing the "Volume +" and "Volume -" keys to turn on the device by pressing the "Enable / Disable" button.
   
4. Release the keys "Volume +" and "Volume -" only at the moment of vibration of the device.
   

Instructions for resetting the device to factory condition (Hard Reset):

Instructions for resetting the device to factory condition (Hard Reset):

The way to reset the device to the factory state (Hard Reset) through the device settings menu:

The way to reset the device to the factory state (Hard Reset) through the device settings menu:

Settings ->Device Information ->Reset.

Ways to reset the device to the factory state (Hard Reset) by pressing the device buttons:

Ways to reset the device to the factory state (Hard Reset) by pressing the device buttons:

Option 1:

The way to reset the device to the factory state (Hard Reset) by pressing the device buttons:

Hold the On / Off button on the device on hold and turn off the device if the device does not restart to turn on the device by pressing the On / Off button, and when the HTC screen saver appears, hold down the Volume - button and release it only when displayed on the screen device exclamation mark, then implement a mechanism to reset the device to the factory state (Hard Reset), i.e. Press the "Volume +" key ->Key "Volume -" ->"Enable / Disable" button ->The "Volume -" key, after which the device should reboot and boot into the Windows Phone system.

Option 2:

The way to reset the device to the factory state (Hard Reset) by pressing the device buttons:

Turn off the device. With the device turned off, hold down the volume down button and then the power (on) button. After vibrating the signal release the power button (on). Wait until the exclamation mark appears. After the exclamation point appears, release the volume down button, and then press the following buttons one by one: increase volume, decrease volume, power (turn on), decrease volume.

Instructions for resetting Windows Phone settings

Instructions for resetting settings from Microsoft

Instructions for disabling the "democratic" mode and then resetting the settings

Exit demo mode:

1. Make sure the screen rotation is enabled on the device.
   
2. Go to settings ->device information ->Click "update demo", a confirmation message appears (do not click "yes").
   
3. Hold the device upright.
   
4. Rotate the device 90 В° to the left.
   
5. Return the device to its original upright position.
   
6. Rotate the device 90 В° to the right.
   
7. Return the device to its original upright position.
   
8. Click "yes" in the message that appears and agree to restoring the factory settings.
   
9. After a while, the device will reboot and the device will boot into the welcome menu.
   
10. After restoring the settings, the device will work as normal.
    
11. After the whole procedure, in the information about the device, instead of the button "update demo", the button "reset settings" appears.
    

Post has been editedkovalDN - 03.04.15, 14:19

Reason for editing: updated instructions

[B1rdMan]

Linuxboy2007 @ 01/18/2013, 21:43

load (turn off and on) the phone - if a screen appears with information about the device - m

Yeah, the info came out, but how can I flash it, is there a pro on htc 8s?

[Altoz]

B1rdMan,Above I threw the same address on the firmware (official, but I didn’t sew myself) just try to turn it off now and you can make XP

Post has been editedAltoz - 18.01.13, 21:03

[Linuxboy2007]

Altoz. Closed links with firmware.
B1rdManI can pour on ifolder

[Linuxboy2007]

B1rdManWhat firmware did you install? RUU_RIO_U_APO_00_HTC_RUS_?
AltozWe must say the moderator;)

Post has been editedLinuxboy2007 - 18.01.13, 21:16

[B1rdMan]

] {oT2629
You say the truth, there was little memory, but I don’t remember exactly how much.

Posted on 01/18/2013 21:18:

Linuxboy2007 @ 01/18/2013, 10:15

toru say

The one that threw offAltoz, RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30_RETAIL_ENC_RELEAS
E.
Throw off your please, you have RUS as if, and here is Europe

Post has been editedB1rdMan - 18.01.13, 21:23

[Linuxboy2007]

B1rdManYou need RUU_RIO_U_APO_00_HTC_ENG_1.04.411.03_1.11b.3054.25_10.13.30_RETAIL_ENC_RELEASE.e
xe - while other regions can not be flashed
Now zalya on mail files

Post has been editedLinuxboy2007 - 18.01.13, 21:26

[B1rdMan]

So I got rid of, then I downloaded, but it turns out I need rus, I did not know: rolleyes:

[Linuxboy2007]

B1rdMan
http://files.mail.ru/15363C4D54454F7A973C61F9A6CCD2CF

Post has been editedkovalDN - 27.05.13, 16:05

Reason for editing: + Added a link to the header

[B1rdMan]

Linuxboy2007
Thank you, the firmware has gone, I'm waiting for the end of the process: happy:
Everything is working! Thank you very much!

Post has been editedB1rdMan - 18.01.13, 22:33

[Altoz]

xNokia5230x,All the same, we need an installation, so at least getting rid of the applications, from here there will be more space and the folder others will be less worried about IMHO
B1rdMan,In class, good luck) follow the place in smart!) It is a pity that my firmware did not go)

[sasha_net]

What gives this firmware?

[B1rdMan]

[email protected], 23:38

good luck) follow the places

And you will not be sick;) Thank you, though I did not go, but I responded!

[valera1383]

and how to change the cid or Russian pour into it?

[Linuxboy2007]

valera1383That's what I found
http://forum.xda-developers.com/showthread...goto=nextnewest
With hexeditor it didn’t work with daaavno - tried to remember youth, didn’t work :(

Post has been editedLinuxboy2007 - 22.01.13, 00:06

[TolanPR]

Hi guys, please tell me, they installed a voice assistant in the phone, namely press the windus logo for a long time, and from there they downloaded and installed the language pack, the phone eventually rebooted, the language pack was installed and the sad smiley was shown roll back the phone?

[Newcraft]

TolanPR,
Only flashing, sad emoticon - blue screen of Windows Phone 8. Either flash firmware in the header, or to the service)

[fakov5]

Who tried to disassemble the thread of this firmware?

[saintonotole]

fakov5,There are no universal (and indeed any) tools for parsing WP8 firmware. But I sorted out the firmware from 920 lumii, it's quite possible to get to the file system and partition table.