264 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> D-Link DIR-300 - Discussion | [wifirouter] Discussion, firmware, problem solving
_Danila_Master_
Message#1
27.07.14, 18:56
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 4676
Check in: 09.12.12

Reputation:-  780  +

Attached Image

Internet center model:DIR-300
Discussion, Setup, Help

Attention!
This model has several revisions and build versions with completely different hardware, for which different firmware is required!



Official Device Information
5
Useful articles from the manufacturer's website

- Instructions for setting up a wireless network
- An example of setting up a wireless network of a router (DIR-300NRU, DIR-320NRU, DIR-615 / K1 - firmware 1.4.x). WPA-PSK / WPA2-PSK encrypted
- Instructions for setting port forwarding
- How to enable multicast function (to support IP TV) in DI-xxx and DIR-xxx series routers
- How to configure the router connection to the provider in PPTP / L2TP mode + Dynamic (Static) IP (DIR-300NRU, DIR-320NRU, DIR-615 / K1 - firmware 1.4.x)
- Configuring data encryption for Wi-Fi in DIR-xxx series Internet gateways (using the example of DIR-300)
- How to configure the router connection to the provider in the Static IP mode (DIR-300NRU, DIR-320NRU, DIR-615 / K1 and K2 - firmware 1.4.x)
- Instructions for setting up PPTP / L2TP connection
- What is port forwarding in the router for and how to configure it (DIR-300NRU, DIR-320NRU, DIR-615 / K1 - firmware 1.4.x)
- Configure PPPoE (Dual Access) Connection DIR-300
- An example of setting up a “triple play” connection using VLAN
- How to configure the router connection to the provider in PPPoE mode (DIR-300NRU, DIR-320NRU, DIR-615 / K1 - firmware 1.4.x)
- Selecting a LAN port for connecting an IPTV set-top box
- An example of configuring the router DIR-XXX as a vlan switch.
- Instructions for setting up Static IP connection
- Instructions for setting up a PPPoE connection
- Configuring PPTP / L2TP (Dual Access) connections using the example of the DIR-300
- Overview: D-LINK DIR-300A Wireless Router
- DIR-300S Review
- Network Design Tools
Audit DIR-300
A1 (processor: Atheros AR2317)
Appearance
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions

B1,B2/B3,B4 (���������: Ralink RT3050F/RT3350F) download

Appearance
Attached Image
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions
// D-Link \\

- Firmware catalog
- Firmware 1.2.131
- Firmware 2.04 (+ LangPack Rus)
~
- Beeline firmware for D-Link DIR 300NRU B1 / B2 / B3 router - 1.2.120
- Batch file for restarting DIR-300 (B1, B2, B3) on factory firmware via PC and curl.exe utility
// ZyXEL \\

- Update algorithm DIR-300 B1, B2, B3 with firmware ZyXEL Keenetic Lite rev.A
// OpenWrt \\

- OpenWrt WiKI (for revisions B1, B2, B3)
- OpenWrt firmware for DIR-300 B1, B2, B3 (with the openvpn client and luci running)
// DD-WRT \\

- Instructions for firmware DD-WRT in DIR-300 / NRU (rev.B1)
- Video on wireless bridge configuration on DD-WRT firmware in DIR-300 / NRU (rev.B1)
- Configuring D-link DIR-300 B1 on DD-WRT firmware in Wi-Fi repeater mode
// Wive \\

- Wive-NG WR-150N - RT3050 Universal firmware for all devices(for DIR-300 B1 download Wive_WR-150N-RT3050-1T1R.x.x.xx.RU.ddmmyyyy.bin.zip)
- Nitr0 builds (DIR620 / DIR300 / AsusRTG revB web image) - Only for switching from / to the universal firmware (or for operation on the Nitr0 network)
- Adapted Wive firmware for DIR-300 B1-4 version 4.8.4.RU dated 04/08/2014
- Adapted Wive firmware for DIR-300 B1-4 version 5.3.13.RU of 05/27/2016
- Adapted firmware Wive for DIR-300 B1-4 version 5.3.14.RU from 01/18/2017
// Padavan \\

- Build firmware from Padavan for DIR-300 revision B1, B2, B3, B4
// Miscellanea \\

- Recovery of DIR-300 NRU B3 (rir300eeu b3e) after unsuccessful firmware
- Switch from Beeline firmware to any other (DIR-300 B1)
- Change bootloader to DIR-300 B1 via UART TTL console cable
- Recovery DIR-300 / NRU B3 with firmware from Beeline
- How to flash a D-Link DIR-300 B1-B3 router to a customized Beeline firmware and back
- Flashing Dir-300 / NRU b1 from DD-WRT to native firmware
- Comparative performance tests on various firmware
~
- Information on overclocking the processor frequency up to 384MHz DIR-300 B1
- Access to the DIR-300 configuration without a password and authorization (on older firmware)
B5, B6, B7 NRU (processor: Ralink RT5350F)
Appearance
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions
// D-Link \\

- Firmware Catalog (B5, B6)
- Firmware Catalog (B6)
- Firmware Catalog (B7)
- Firmware 2.5.1
- Firmware 2.5.12
- Firmware 2.5.13 (nightly build of 04/25/2017)
- Firmware 2.5.15
~
- Firmwares from Beeline for D-Link DIR 300NRU B5 / B6 -1.2.255 router
// ZyXEL \\

- ZyXEL Keenetic Start v2.05 firmware (AAKV.X) C6 for DIR-300 NRU B5 (B6, B7)
- Archive adapted firmwareDIR_300NRUB5-to-KeeneticLiteB(ofof this instruction)
- Upgrade Instructions for DIR-300 NRU B5 with Zyxel Keenetic Lite B Adapted Firmware
- Adapted firmware KEENETIC_LITE-V1.00 [AABL.1.3] D0-r-wget-mod-1_forDIR300NRUB5_nomtd_071013
~
- Flashing DIR-300 NRU B5 (B6, B7) in ZyXEL Keenetic Start (detailed instructions)
- Flashing DIR-300 NRU B5 (B6, B7) in ZyXEL Keenetic Start
- Flashing DIR-300 NRU B5 (B6, B7) in ZyXEL Keenetic Start (video)
~
- Alteration of DIR300 B7 in ZyXEL KEENETIC 4G II (for working with USB modems and other modding)
- Modification of DIR-300 B7 in ZyXEL KEENETIC 4G II (with soldering iron and programmer)
// OpenWrt \\

- OpenWrt WiKI (for revisions B5, B6, B7)
- openwrt-aa-dir300b7
- openwrt-aa-dir300b7 + luci + upnp
- Correction of data reading error for the radio module on the OpenWrt Attitude Adjustment firmware (for revision B5, B6, B7) (works until resetting the settings)
// LEDE \\

- LEDE firmware for DIR-300 b5, b6, b7fromstp101(with fix of critical vulnerability in the WPA2 protocol - Key Reinstallation Attacks (KRACK))
// Padavan \\

- Build firmware from Padavan for DIR-300 revision B5, B6, B7
// Miscellanea \\

- Switch from Beeline firmware to native firmware (DIR-300 B5)
- Rollback with the notorious custom firmware from Beeline (DIR300 NRU B5)
- DIR-300 B5 decoupling algorithm from Dom.ru firmware
- Comparative performance tests on various firmware
~
- Alteration of the DIR-300 B7 to 320NRU B1
- Information on the replacement of flash memory (DIR-300 B7)
- Recommendations for who the router starts badly (DIR-300 B7)
C1 (processor: Realtek RTL8196C)
Appearance
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions
D1 (processor: Realtek RTL8196E)
Appearance
Attached Image
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions
S / A1 (processor: Realtek RTL8196E)
Appearance
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions
A / A1A (processor: Realtek RTL8196D)
Appearance
Attached Image
Attached Image
Attached Image
Attached Image
Specifications
Firmware / instructions
Memory dumps
General instructions, Useful, Miscellaneous
- Hardware revision characteristics of the DIR-300 in the OpenWRT Wiki
- Characteristics of hardware audits DIR-300
- Firmware for all revisions
- Iron compatibility of some DIR-300 revisions with ZyXEL Keenetic
~
- Reassigning WAN port to LAN
~
- Removing a dump of the current firmware routers D-Link DIR-300
~
- Ways to restore DIR-300
- Recovery option DIR-300 A1 (redboot method)
- Recovery option DIR-300 D1
~
- Recommendations for solving the problem of unstable operation of the router (any revision)
~
- Source codes (GPL Source Code) for almost all revisions of the DIR-300
- Source Code (GPL Source Code) for DIR-300A / A1A
~
- We configure the work of the DIR-300 and the IP Webcam program (using the tablet as a webcam) from outside its home network
- IPTV connection options on D-Link routers
- Setting up IPTV on OPENWRT in client mode
- Configuring the router D-Link DIR-300 NRU B1 and B3 for Rostelecom FTTB
- Configuring the D-Link DIR-300 router in the Wi-Fi client mode
~
// OpenWrt \\

- How to Russify OpenWrt
- Enable data transfer at 150 Mbps over a WiFi connection
- Enable 802.11n standard on OpenWrt firmware
- Instructions for configuring OpenVPN on OpenWrt
- Instructions for configuring the router as a client / repeater on the OpenWRT / LEDE firmware
// ZyXEL \\

- Important information on MAC addresses when upgrading from DIR firmware to Keenetic v.1.xx
- Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
- Setting up an automatic reboot on ZyXEL Keenetic firmware versions 2.xx
// Wive \\

- Return from Wive to the factory firmware
Information on "Night" firmware
Firmware:
Q:"What is night firmware?".
A:The formula is simple: Last release + current cumulative edits for known issues.

Q:"How is the nightie different from the release?"
A:It is necessary to understand that this is a “draft”. When a new “nightie” is being made, something is fixed or optimized in it, but this firmware (unlike the release version) did not pass the entire set of tests for internal and external compatibility. Drafts, on the other hand, are also correct. Yes, the risk of running into a glitch is higher, but "baubles and fiches" in "nightie" appear much earlier than in releases.
What to use - you choose.

Q:"Where can I get the current nightie?"
A:In the Telegram there is a bot@dlink_rubotdistributing "night" firmware on most current models.
Attached Image

Even if the bot does not distribute the firmware specifically for your model / revision, on the Telegram channelD-Link_RUThere will surely be people who can help you with your question.
Current changes in the header
23.09.2018- added:
- DIR-300 a1: DD-WRT Russified firmware v24-sp2 std-build 13064 dated 10/10/09
History of changes caps

04.09.2018- added:
- Return from Wive to the factory firmware

02.08.2018- added:
- Change bootloader to DIR-300 B1 via UART TTL console cable

31.07.2018- added:
- DIR-300 b1: Comparative performance tests on various firmware

30.07.2018- added:
- DIR-300 b5: Comparative performance tests on various firmware

29.07.2018- added:
- Access to the DIR-300 configuration without a password and authorization (on older firmware)

16.07.2018- added:
- Build firmware from Padavan for DIR-300 revision B1-B4, B5-B7

22.06.2018- added:
- Instructions for configuring the router as a client / repeater on the OpenWRT / LEDE firmware

14.06.2018- added:
- Current nightly firmware 3.0.0 for revision C1
- Current nightly firmware 3.0.0 for revision D1
- Current nightly firmware 3.0.0 for revision S
- Current nightly firmware 3.0.0 for revision AA1A

12.11.2017- added:
- Configuring D-link DIR-300 B1 on DD-WRT firmware in Wi-Fi repeater mode

28.10.2017- added:
- DIR-300 B5 decoupling algorithm from Dom.ru firmware

23.10.2017- added:
- LEDE firmware for DIR-300 b5, b6, b7fromstp101(with fix of critical vulnerability in the WPA2 protocol - Key Reinstallation Attacks (KRACK))
- OpenWrt firmware for DIR-300 B1, B2, B3 (with the openvpn client and luci running)
- Instructions for configuring OpenVPN on OpenWrt

19.10.2017- added:
- DIR-300 (AA1A), (S / A1)Night build 3.0.0 from 10/17/2017

30.09.2017- added:
- Setting up an automatic reboot on ZyXEL Keenetic firmware versions 2.xx

23.09.2017- added:
- Correction of data reading error for the radio module on the OpenWrt Attitude Adjustment firmware (for revision B5, B6, B7) (works until resetting the settings)
- Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
- Enable 802.11n standard on OpenWrt firmware
- How to Russify OpenWrt

21.09.2017- added:
- Recommendations for who the router starts badly (DIR-300 B7)
- Openwrt (Kamikaze 8.09) on the DIR-300 A1
- Instructions for the firmware DD-WRT in DIR-300 A1 (with all the necessary files)

13.09.2017- added:
- Batch file for restarting DIR-300 (B1, B2, B3) on factory firmware via PC and curl.exe utility

12.09.2017- added:
- (OpenWrt) Enable data transfer at 150 Mbps over a WiFi connection

11.09.2017- added:
- DIR-300 A1 - second external antenna
- Video on wireless bridge configuration on DD-WRT firmware in DIR-300 / NRU (rev.B1)
- DIR-300 B3 Memory Dump
- The theoretical possibility of soldering an external antenna to the DIR-300 D1

10.09.2017- added:
- the theme cap has been completely redesigned
- Firmwares from Beeline for D-Link DIR 300NRU routers
- Instructions for firmware DD-WRT in DIR-300 / NRU (rev.B1)
- Instructions for firmware DD-WRT in DIR-300 / NRU (rev.A1)
- Nitr0 builds (DIR620 / DIR300 / AsusRTG revB web image) - Only for switching from / to the universal firmware (or for operation on the Nitr0 network)(you can download the current firmwarehere)
- Wive-NG WR-150N - RT3050 Universal firmware for all devices(for DIR-300 B1 download Wive_WR-150N-RT3050-1T1R.x.x.xx.RU.ddmmyyyy.bin.zip)
- We configure the work of the DIR-300 and the IP Webcam program (using the tablet as a webcam) from outside its home network
- Archive adapted firmwareDIR_300NRUB5-to-KeeneticLiteB(ofof this instruction)
- Setting up IPTV on OPENWRT in client mode
- Recovery DIR-300 / NRU B3 with firmware from Beeline
- Configuring the router D-Link DIR-300 NRU B1 and B3 for Rostelecom FTTB
- Resuscitation of the router or how to restore the D-Link Dir 300 rev.A1
- Recovery of DIR-300 NRU B3 (rir300eeu b3e) after unsuccessful firmware
- Configuring the D-Link DIR-300 router in the Wi-Fi client mode
- How to flash a D-Link DIR-300 B1-B3 router to a customized Beeline firmware and back
- Differences between revisions B5, B6, B7
- Differences between revisions B1, B2 / B3, B4
- IPTV connection options on D-Link routers
- Upgrade Instructions for DIR-300 NRU B5 with Zyxel Keenetic Lite B Adapted Firmware
- Update algorithm DIR-300 B1, B2, B3 with firmware ZyXEL Keenetic Lite rev.A
- Important information on MAC addresses when upgrading from DIR firmware to Keenetic v.1.xx
- Recovery option DIR-300 D1
- Modification of DIR-300 B7 in ZyXEL KEENETIC 4G II (with soldering iron and programmer)
- Flashing Dir-300 / NRU b1 from DD-WRT to native firmware
- Rollback with the notorious custom firmware from Beeline (DIR300 NRU B5)

21.08.2017- added:
- LEDE Firmware for DIR-300 b5 - b7fromstp101

You can also ask your question.D-Link employeehere on the forum
or contact through the group in the Telegram.


Post has been edited_Danila_Master_ - 10.02.19, 20:10
Reason for editing: see: Current changes in the header
Chykcha
Message#42
29.11.13, 21:51
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 939
Check in: 17.07.11
Acer liquid mt

Reputation:-  43  +

Full reset and sew from the recovery console. If the alternative firmware is not working and available, just try them. If the effect is still zero, then the downgrade burned the controller chip. : sorry:


--------------------
Fujitsu Lifebook AH532 ->{Core i3.2.4 GHz, 4GB DDR3, SATA, 5400 rpm, 320GB, HD3000 (wi-fi-ar5b95), arbyte under Win 10 x64PRO & Mac OS X 10.12 Sierra (Full work, almost native)}
rickizh
Message#43
06.12.13, 21:45
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 19.02.13

Reputation:-  0  +

Help guys, there is a router connected to it 2 pc on Ethernet and 3 phones + a tablet on wifi everywhere Wi Fi Hood works and on my phone it connects for about a minute, it works for 5 seconds and crashes, and so what is the problem?
MrTefal
Message#44
09.12.13, 16:15
a guest
*
[offline]

Group: Users
Messages 9
Check in: 26.03.12

Reputation:-  0  +

I don’t already know where to put my head or the voice of my provider, whether I’m so stupid or he is wise! Help, sleepless nights at the computer and the Internet works around the clock in search of information about it, but I can not understand anything !! : suicide:
So! I have:
* Internet from Beeline
* Tv prefix from beeline
* Wifi D-link router (dir 300)
* Ps3 (Accordingly, it must be connected, but this is after the router)

How do I set up a router from scratch? Yes, I press the reset button and reset all the settings that we have wounded .. Now again .. Where to go, what to do?
My main Internet cord goes first to the special adapter Beeline, it has 4 windows, from there the cord goes to the computer, thanks to which I am writing here and in the TV set-top box, everything is broadcasting a TV set .. From the same adapter should, as I understand it, go cord and router ... Well, if the thread of the wires, I can still figure out, then with the internal settings in general nothing .. Help !! Help to configure it under my provider and under my situation .. Everywhere on the Internet there is nothing like my, everything else and different ...

Attached images
Attached Image
Shoore
Message#45
09.12.13, 16:37
Guru
*********
[offline]

Group: Honorary Gameday
Messages 17919
Check in: 10.04.10
Samsung Galaxy Note9 Exynos

Reputation:-  2692  +

How do I set up a router from scratch?
Herenot watched?
It seems increasingly less accessiblehttp://www.youtube.com/watch?feature=playe...dn9p3eJTdg#t=96

special adapter Beeline, 4 windows in it
And this is not a router, an hour?

Post has been editedShoore - 09.12.13, 16:50
pasha_550
Message#46
09.12.13, 18:09
VZHYK!
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 9277
Check in: 31.07.07
Fujitsu-Siemens Loox C550

Reputation:-  1945  +

Help to configure it under my provider and under my situation .. Everywhere on the Internet there is nothing like my, everything else and different ...

OnlineBeedid not try to watch?

Shoore
Well? Monthly? } -)


--------------------
Posted in HP without asking - was blacklisted.
xxx: a Google abolished or religion does not allow?
yyy: Google is the Matrix, the less you ask it, the weaker the machines will be during the Great Battle
MrTefal
Message#47
11.12.13, 15:40
a guest
*
[offline]

Group: Users
Messages 9
Check in: 26.03.12

Reputation:-  0  +

Everything!! Happened!

Post has been editedMrTefal - 11.12.13, 16:31
Chykcha
Message#48
12.12.13, 17:42
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 939
Check in: 17.07.11
Acer liquid mt

Reputation:-  43  +

IMHO, the standard Dedlinkovskiy proshi-still brainstorming)) I first stitched my 300y fried on dd-wrt, there certainly are more buns, tweaking, etc., but the reassignment of the port wan wander was ignored, and the script worked through again, although in principle true, but I can only explain these things with the curvature of my claws and the fact that my revision B1 was indicated at that time only as an experimental release. After starting to fight, I filled wive, right now uptime for 4 months, not a single glitch, threshes hellish, the speed even increased compared with vrt. But, due to the pores roast that at one time was at the entrance for power soldered cooler and upgrade of the case under it) Vive requires cooling unfortunately. otherwise, conveniently, powerfully, stably. : happy:


--------------------
Fujitsu Lifebook AH532 ->{Core i3.2.4 GHz, 4GB DDR3, SATA, 5400 rpm, 320GB, HD3000 (wi-fi-ar5b95), arbyte under Win 10 x64PRO & Mac OS X 10.12 Sierra (Full work, almost native)}
Deegeetal
Message#49
12.12.13, 17:45
Novice
***
[offline]

Group: Active users
Messages 33
Check in: 11.06.12
Google nexus 5

Reputation:-  1  +

Chykcha @ 12.12.2013, 18:42*
IMHO, the standard Dedlinkovskiy proshi-still brainstorming)) I first stitched my 300y fried on dd-wrt, there certainly are more buns, tweaking, etc., but the reassignment of the port wan wander was ignored, and the script worked through again, although in principle true, but I can only explain these things with the curvature of my claws and the fact that my revision B1 was indicated at that time only as an experimental release. After starting to fight, I filled wive, right now uptime for 4 months, not a single glitch, threshes hellish, the speed even increased compared with vrt. But, due to the pores roast that at one time was at the entrance for power soldered cooler and upgrade of the case under it) Vive requires cooling unfortunately. otherwise, conveniently, powerfully, stably.

Wive-ng?


--------------------
Sly Tatar snout :)
zimms2
Message#50
12.12.13, 20:30
Local
*****
[offline]

Group: Banned
Messages 243
Check in: 15.10.12

Reputation:-  7  +

good time! Route Dir-300 V1, DD-ART. I want to fill the factory firmware. Through the Emergency Room, the firmware, LIKE IT, begins, but after a minute it is reset and nothing is put. tried different. or advise another. the problem is that before all the connected devices worked fine, but now everything is bad.


--------------------
Google Nexus 4 [4.3] SE LwW [2.3]
Explay Surfer 7.02 [4.2] iPod Touch 4G
andreyhi-fi
Message#51
13.12.13, 18:43
Novice
***
[offline]

Group: Active users
Messages 41
Check in: 12.12.11

Reputation:-  0  +

Guys, problem. 300 nru B3. I turn on, the router blinked, started. Then nonsense. That wai-wai orange, then the globe, then the orange network, will start again, and so on. I turn off, turn on the power supply, it will work normally from 1 min to 20–30 min, in short, how it will turn out, but I distort the power several times in a row, I do not want to start. The end of one is orange. network indicator. By the summer it was like this, I poked it 30 times until I earned it, two days ago I cut down the electric power, filed and it began, tell me what could be.

Posted on 12.12.2013, 18:43:

Network – I mean the power indicator, the lowest. And so waffle or the Internet, or both.
Chykcha
Message#52
18.12.13, 16:13
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 939
Check in: 17.07.11
Acer liquid mt

Reputation:-  43  +

Deegeetal, exactly)
good time! Route Dir-300 V1, DD-ART. I want to fill the factory firmware. through the emergency room

After ddshki there is a manual on their site, because it touches the bootloader, if I'm not mistaken, and accordingly the standard then does not climb.
Andreyhi-fi @ 12/13/2013, 18:43*
Guys, problem. 300 nru B3. I turn on, the router blinked, started. Then nonsense

Trying to flash. Help is excellent, no, we look further. If not for warranty / don't care for this, disassemble the route, look at it, turn it on, look at the work. You can try changing it. It happens they are burning with a similar macaron. But here it seems like mine -the damage in the device itself, it looks like overheating or one of the chips is moving away. let's try to push slightly on the chip-passes-profit when heresy on the indicators!, we decide whether to solder or buy a new device, no, we are looking for an old radiator / cooler-set, watch.Do not it helped, it means already in the util. I have a cooler, but out of the damage-in segot burnt van port) Imho- if flashing or cooling doesn’t help, go for a new device. The patch or reball surpasses the cost of a new device. Pardon is confusing, confusion in the head after work)


--------------------
Fujitsu Lifebook AH532 ->{Core i3.2.4 GHz, 4GB DDR3, SATA, 5400 rpm, 320GB, HD3000 (wi-fi-ar5b95), arbyte under Win 10 x64PRO & Mac OS X 10.12 Sierra (Full work, almost native)}
andreyhi-fi
Message#53
19.12.13, 22:47
Novice
***
[offline]

Group: Active users
Messages 41
Check in: 12.12.11

Reputation:-  0  +

I changed it hardware half a year ago, while I was under warranty, and here again. Replaced bp with a new one, turned on, I flashed it again, worked for a day, and started, opened, cooled, pressed, in short, as a generator of random systems. I will rest for a long time - it will work a little, then I distort bp, it turns on a little, then no. In short, I bought a ziksel kinetics 2-pestnya. And with my bp donor works fine. Thanks for the advice.
4esno4ek
Message#54
20.01.14, 06:23
a guest
*
[offline]

Group: Users
Messages 1
Check in: 20.01.14

Reputation:-  0  +

Please tell me the problem I forgot the password what to do!? Thanks in advance. ..
Greschnickow
Message#55
20.01.14, 09:11
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 09.09.13

Reputation:-  0  +

Reset settings done. The reset button on the back side is there, hold it for about 15 seconds.
Mac Guru
Message#56
21.01.14, 10:09
Guru
*********
[offline]

Group: Curators
Messages 2315
Check in: 26.06.07
Apple iPhone 6s

Reputation:-  78  +

Dlink dir 300 c - firmware 1.20, doesn’t work in client mode, also doesn’t find a repeater. Plus, the bootloader with the stock is not always changed directly, either by tftp or native tulse.
Curved device, not all Internet on dhcp receive (((
sashek06
Message#57
26.01.14, 14:30
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 67
Check in: 17.08.10
Samsung Galaxy Note 3 SM-N900

Reputation:-  3  +

Hello everyone, I hope not mistaken the topic. Such a problem, in the same apartment is dir-300 b1 with firmware 2.04, at one time various devices hung on it (HTC Desire, SGS2, Ace2, Note2, iPad) and everything is fine. In another apartment, dir-300 is also worth it but already b4, so when connected to it, all the same devices begin to discharge wildly, if you turn off the Wi-Fi then for 3g again the normal power consumption. The signal is good, full scale, what can it be connected with or what parameters should you pay attention to?
Mac Guru
Message#58
29.01.14, 22:02
Guru
*********
[offline]

Group: Curators
Messages 2315
Check in: 26.06.07
Apple iPhone 6s

Reputation:-  78  +

Well, the router so gives a signal that the devices are constantly reconnecting or can not save the connection. And with a statics not less discharge?
I won’t tell you anymore, it’s necessary to dig something
Chykcha
Message#59
03.02.14, 16:29
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 939
Check in: 17.07.11
Acer liquid mt

Reputation:-  43  +

We go to Wai-Wai settings on Droids and see if it often changes, and we put on static routes, again we look. Need to monitor the problem. Is the channel everywhere on the auto choice?


--------------------
Fujitsu Lifebook AH532 ->{Core i3.2.4 GHz, 4GB DDR3, SATA, 5400 rpm, 320GB, HD3000 (wi-fi-ar5b95), arbyte under Win 10 x64PRO & Mac OS X 10.12 Sierra (Full work, almost native)}
sashek06
Message#60
03.02.14, 22:10
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 67
Check in: 17.08.10
Samsung Galaxy Note 3 SM-N900

Reputation:-  3  +

The channel is forced to 6, before that I tried 1 and 12 (on the first router the first one is also forced). As for SP I'll pay attention, but it surfs comfortably, there are no reconnections
Chykcha
Message#61
05.02.14, 09:52
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 939
Check in: 17.07.11
Acer liquid mt

Reputation:-  43  +

The channel is better in cars and see. Perhaps the 6th is clogged and trying to wade the devices at full capacity using the transmitter.


--------------------
Fujitsu Lifebook AH532 ->{Core i3.2.4 GHz, 4GB DDR3, SATA, 5400 rpm, 320GB, HD3000 (wi-fi-ar5b95), arbyte under Win 10 x64PRO & Mac OS X 10.12 Sierra (Full work, almost native)}
D-Link
 

264 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/25/19 20:34