[X]Assistant

[bro2013bro]

teXet TM-8041HD - Firmware
teXet TM-8041HD
Description | Discussion пїЅ | Firmware пїЅ

Theme Rules

Dear visitors of the topic!

K

1.Before asking a question in the topic, read the header and / or use the "Find in this topic" button.
2.Instead of posts with thanks, not greedy and put a plus sign to those who helped.
3.Do not ask the topic to include something in the header - write to the curator in QMS.
4.Do not repeat your posts - if they didn’t answer, then no one knows the answer or it is in the cap.
5.Rudeness will be removed.
6.Do not respond to flooding, thereby clogging up the topic even more.
7.Do not copy or repeat the contents of the header in your posts.
8.Less offtopic.
9.Hide screenshots under the spoiler.

Important information!

Important information about tablet revisions:

Rev.1 (S / N: 124xxxxx)- fit firmware from revision 1 and 2. The rear camera does not work in the firmware of the 2nd revision. To install the firmware from the 4th revision - no data.
Rev.2 (S / N: 130xxxxx)- suitable firmware from 2 and 4 revisions. Firmware from the 1st revision do not get up - a brick!
Rev.4 (S / N: 131xxxxx)- suitable firmware from 4 and 2 revisions. Firmware from the 1st revision do not get up - a brick!

To find out what's your serial number - remove the tablet from the case, turn over and find the knocked out S / N: xxxxxxxxxx.

Drivers and Utilities

USB Burning Tool v1.6.31(drivers in archive with flash driver)

Official firmware

Rev.1

• TeXet firmware from 09/13/2012 mirror
  
• TeXet firmware from 09/19/2012 mirror
  

Rev.2

• TeXet firmware from 12/24/2012
  
• Firmware teXet from 11/01/2013
  

Rev.4

• Firmware teXet from 03/16/2013
  

Custom firmware

Lightweight mod-firmware for Rev.2 by nemo-nemo
CustomROM v2.0 / v3.0 by bro2013bro(v1.0b is wanted)
"Hybrid" ROM by vadznik
GONSoft MOD v.1.01 by gonsoft(Only for the first revision of the tablet!) (V2.02 and v.3.01 are searched)

Recovery

Temporary CWM(without installation in the system)by nemo-nemo
Permanent CWM(for installation in the system)by nemo-nemo
Permanent TWRP(for installation in the system)by nemo-nemo

Instructions

User Guide (pdf)
Instructions on firmware from an external memory card | Another very detailed
Instructions for the firmware from the internal memory card
Signed zip packages for installation via stock recovery

miscellanea

Kit - "All in one place" for flashing / unscrambling by nemo-nemo
Different patches by bro2013bro
FTP server from Alcotel with service data for the device

Photos of entrails: Rev.2 Rev.4
Related devices:

(8") ONDA V811 Discussion пїЅ | Firmware пїЅ >>> teXet TM-8041HD (our device)
(7") ONDA V712 Discussion пїЅ | Firmware пїЅ >>> teXet TM-7043XD Discussion пїЅ | Firmware пїЅ
(9") ONDA V971 Discussion пїЅ | Firmware пїЅ >>> teXet TM-9741--- Discussion пїЅ | Firmware пїЅ

Survey Screenshots

The result of the vote on the division of topics

Cap updates

14.01.2018

• (+) Added the Stock firmware teXet from 09/19/2012 Rev.1
  
• (+) Added mirrors for off. firmware first revision
  

18.11.2017

• (+) Added poll about sensor calibration on revisions
  
• (*) Fixed links to off. the firmware of the first revision and the instruction to the device, in connection with the change of the organization of directories to off. Texet site
  

31.01.2017

• (+) Added link to "Alcotel FTP server with service data for the device"
  
• (+) Added links to "Photos of entrails: Rev.2 Rev.4"
  
• (*) Small text and graphic cap edits
  

27.01.2017

• (+) Added "Lightweight mod-firmware for Rev.2" by nemo-nemo
  
• (*) Small text and graphic cap edits
  

19.01.2017

• (+) All Recovery workers rendered into separate spoiler "Recovery"
  
• (+) Added permanent TWRP by nemo-nemo
  
• (+) Added permanent CWM by nemo-nemo
  
• (+) Added temporary CWM by nemo-nemo
  
• (+) Added posts to the "Miscellaneous" section to quickly switch to related devices
  
• (-) Removed from the header link "Installing CWM on a memory card / in the system"because it is outdated and better appeared.
  
• (*) Small text and graphic cap edits
  

18.01.2017

• (+) Added post "Set -" All in one place "for flashing / unscrambling" in the section "Miscellaneous"
  

15.01.2017

• (+) Added links to ONDA V811 - the parent of our tablet (with minor changes)
  
• (-) Removed from the header link "Solving screen calibration problems"because it has not proved its effectiveness. Most likely the author of the post was just lucky.
  
• (-) Removed an empty spoiler from the Onda V811 firmware from the header
  
• (*) Minor text cap edits
  

10.01.2017

• (+) Added the stock firmware teXet from 03/16/2013 Rev.4
  
• (+) Added the stock firmware teXet from 11.01.2013 Rev.2
  
• (+) Added the stock firmware teXet from 12/24/2012 Rev.2
  
• (+) Added flash driver with USB-Burning-Tool-v1.6.31 drivers for a new spoiler "Drivers and Utilities"
  
• (*) Small graphic edits.
  

09.01.2017

• (+) Added information about revisions.
  
• (*) Change caps.Old hat
  
  Big thanksbro2013bro , gonsoft , vadzhik , oktybrina , lesnik757 for the content, and all other users for maintaining the theme.
  

Active user threads

For questions about filling caps, please contactQMS
The curator of the topic isArdogicl

Post has been editedArdogicl - 14.01.18, 14:25

Reason for editing: Watch the "Updates caps" spoiler

[filthgarry]

I asked a question about the firmware in technical support - they said that they should put it on offsite soon. By the way - about Zeon Digital - a good store, I’ve already taken a lot there - they have direct links with the dealers so you can safely take ..

Post has been editedbro2013bro - 28.05.13, 14:36

[kolokola]

Who needs it, on the site posted the firmware in the download section.

[sahas110]

You do everything at your own peril and risk. There is everything on the ONDA site. Instructions for reflashing:
0. Download the firmware, prepare a memory card, charge the tablet by 80%
1. Unpack the firmware in a separate folder
2. Connect the memory card to the computer, format it in FAT32 (optional), drop all the files from the archive into the root of the memory card. After that, remove the memory card from the computer.
3. Turn off the tablet, insert a memory card into it.
4. Hold down Home, press and hold Power. Release the buttons when the picture with the robot appears and the firmware process begins.
5. The firmware will end, the tablet will automatically restart

Remarks
1. Make sure the tablet is at least 80% charged.
2. Back up the necessary data, since all files in the internal memory of the tablet are formatted
3. Do not interrupt the firmware process with Reset or any other methods.
4. Carefully read the instructions before the firmware, if you do not want to deal with a brick and sending a tablet home
On the memory card should be unpacked files, without a folder.

Post has been editedArdogicl - 13.01.17, 20:43

Reason for editing: Removed the dialog with the deleted post. Curator.

[Se7er]

sahas110,I reshooted the instructions, there was no result, as the mobile network icon remained, it remained, and it still discharges quickly ...
Perhaps there is another solution to this problem.

[kolokola]

sahas110,
Well, it means that Texet will soon upload the firmware, and is there 4.1 or 4.0.4?

[Altih]

[email protected], 21:40

Our mother is ONDA V811, TEXET-8041HD her copy

After Texet firmware flashing, do both cameras work? : blush:

[Dima20]

I think the factory can not, factory trash, on any device. Does the ondovian get up well? I downloaded 1.5.5 (like so) that I do not understand how to put

The installation of the standard sewing from the official site was successful, no glitches were noticed, the games are going smoothly. I hope that everything will be ok later)

Post has been edited_mayday_ - 08.01.13, 14:48

[Altih]

[email protected], 18:29

I think the factory can not, factory trash, on any device.

[email protected], 08:44

The installation of the standard sewing from the official site was successful, no glitches were noticed, the games are going smoothly. I hope that everything will be ok later)

Funny: D
What kind of firmware are you talking about? About Ondovskuyu or native of Texet?

Post has been editedAltih - 07.12.12, 08:06

[Dima20]

teksetovskuyu, on this device at least so, and it is better than

[Altih]

[email protected], 09:26

teksetovskuyu, on this device at least so, and it is better than

Do you know that you installed the same firmware that you had on the server? : rolleyes: Two questions - why? and what could change? ;)

If the device is slowed down, then you have something not installed there. It was enough to reset to the factory settings: rolleyes:

Post has been editedAltih - 07.12.12, 08:38

[kolokola]

As far as I know, there are no alternative firmwares on the 8041 in their pure form. The only option is to go to the themes of Onda's "brother" and try to install the alt firmware from them.

[sahas110]

Has anyone updated this firmware? compatibility [b]
Compatibility is complete. Рћnda v811 is Texet 8041HD
Onda has already released 2 firmware, but our horns will not move. Go to the Onda branch v811 firmware, there is all the information.

[kolokola]

sahas110,
Our horn will move when Onda throws the firmware to them, and so 4.1 appeared before us than they did.


P / S. I added a link to the Onda branch in the header, and then I got to climb on the first page every time. By the way, the suggestion about utilities for adding to the header is still valid. Write in a personal.

Post has been editedkolokola - 10.12.12, 14:03

[Dima20]

Professor_09 @ 12.12.2012, 13:11

I have only the sense of a complete zero application of the program on it are not put, the rest of the movie, magazines, muzlo, full gud is silicone power. How to install the program?

I installed the firmware from onda 1.1.5ru, there is android 4.0.3, you can easily make the flash as the main one (I did)
Of all the minus - the main camera does not work (can it be fixed?)

[nikos444]

I understand that Root-rights on this tablet are obtained from the box by default? And how are things with Recovery (CWM for example) and custom firmware?

[fx-man]

I understand that Root-rights on this tablet are obtained from the box by default? And how are things with Recovery (CWM for example) and custom firmware?

CWM is not, but there is a built-in, hold down the buttons on and home when turned on until the robot appears. You can put a zip out of it, they need to re-sign and correct the file with the script. Custom can be taken from onda v811

[fx-man]

[email protected], 21:23

2) CWM Recovery !!! Well, or if it was an effective way to sign zip packages for installation via standard Recovery. We are waiting for the craftsmen in our ranks)

in the topic about ONDA is

[email protected], 01:36

Here are the tools for our onda: OndaWinTools. There is a tool for creating update.zip, so he signs correctly.

The way to sign zip packages for installation via standard Recovery

1. Download "[_ToolsONDA_JB" (a source) and / or find[_Update-zip-packager.rar(1.56 MB)

2. In the folder "placehere" unpack downloaded "update.zip" or other.
3. In "Notepad ++" open the file:

\ placehere \ META-INF \ com \ google \ android \ updater-script

4. Delete everything in it that concerns "mount" at the beginning, and insert:

mount ("ubifs", "UBI", "system", "/ system");
run_program ("/ sbin / busybox", "mount", "-o", "rw, remount", "-t", "ubifs", "/ system", "/ system");

5. Save the file as "UTF-8 without BOM" in "Notepad ++".
Updated(a source):
6. Then run the script to sign the archive. Press n on the question, then point 2 (if the archive is less than 100 mb), if the archive is more than 100 mb, select point 5 (Heap size), set 1024 MB. After we select item 2. We receive an update archive at the output. We rename as we want and install (flash) into the device.

In Recovery, enter through the inclusion with the home buttons clamped and on until the robot appears.

As an example, you can download the archive to throw everything on SD, go into the recovery and select the installation from SD. This is the replacement of the standard keyboard on the keyboard from Android 4.2.
rec.zip(13.59 MB)

Post has been editedArdogicl - 22.01.17, 19:39

Reason for editing: Recovered broken links. Corrected spelling. Completed. Curator.

[Silent_XD]

Not sad, still lagging begins. And if you do not put it on the lock, you need to keep it in the outlet forever (


Maybe there are some programs, and then I got tired of restarting it after a long blocking. Are there any people who lag behind the application after the waiting mode? I even checked it. I started the GTA 3 on the tablet that was just turned on, I stopped GTA, after 5 seconds unlocked and went into the game. Began slowing down in the game, FPS began to squat. As it is not clear the tablet works in standby mode. Maybe in the firmware case, you need a skilled worker in programming ...

Post has been editedSilent_XD - 21.12.12, 16:59

[Dima20]

Silent_XD,
Try to update the firmware by air

[Silent_XD]

Nope writes the system is updated. So that will have to wait. I wrote on the site about my problem can take a note.