[X]Assistant

[zzzepr]

FirmwareHuawei E5776 (MTS 821FT)
Discussion | Firmware

• In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
  
• The topic discusses the firmware itself. All other questions must be asked in the discussion thread of the device.
  
• To compare the device with other models and on the choice, refer to the topic.Selection and comparison of wireless modems
  
• Unlock codes for the device are requested in the topicHere you can get device unlock codes for FREE.
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the "Complaint" button under the message where you were helped, and write a thank you.
  
• Useful topics to note:Forum FAQ, How to search the forum?
  

Specifications

LTE DL150Mbps / UL50Mbps @ 20MHz
LTE FDD DL / UL up to 150 / 50Mbps
LTE TDD DL / UL up to112 / 10Mbps
LTE TDD DL / UL up to 82 / 20Mbps
LTE Cat4 FDD / TDD / DC-HSPA + / UMTS / TDSCDMA
TDD LTE 1900/2300 / 2600MHz
FDD LTE 2600MHz
HSAP + / UMTS 2100MHz
TDSCDMA 1900 / 2000MHz
Wi-Fi 802.11 b / g / n
Supports 10 simultaneous devices
0.96 inch TFT screen
3000mAh E5776 battery
E5776 MicroSD card slot up to 32GB
Quick start in 5s
Dimensions: 104 x 66 x 15.5mm
OS: Windows XP SP3, Vista SP1 / SP2, Win7, Mac OS X 10.6, 10.7 and above.
A source:http://www.mobile4wifilte.co.uk/huawei-e5776.html

Characteristics from the MTS website

3G (UMTS) / HSPA: Yes
4G support: Yes
EDGE: Yes
USB: Yes
Wi-Fi Router: Yes
Sync Connector: miniUSB
GPRS / 3G modem: Yes
Synchronization with PC: Yes
LTE (max) data transfer rate: 100 Mbps
Data transfer rate using HSPA technology (max): 43.2 Mbit / s
EDGE (max) data transfer rate: 236.8 Kbps

A source:http://www.shop.mts.ru/support/connect/det...php?ID=27866164

Firmware and dashboards

Initial firmware from MTS:E5776s22_Update_21.202.15.01.143.rar(22.2 MB)

Official update from MTS:E5776s22_Update_21.202.15.03.143.rar(22.19 MB)

Native firmware from Huawei, without operator customization:E5776_Update_21.202.19.01.778.rar(22.78 MB)

Initial driver / dashboard version:Update_UTPS1.11.05.143_MAC1.11.05.143.rar(11.64 MB)

Driver / Dashboard Update:Update_UTPS1.11.06.143_MAC1.11.06.143.rar(11.59 MB)

Firmware from the Finnish operator Saunalahti ver. 22.264.07.01.260

E5776_Update_22.264.07.02.414 + UTPS1.12.00.414_MAC1.12.00.414

Firmware TCPU 22.265.11.00.00 + WEBUI 15.100.09.00.03
Firmware 22.265.11.02.260 and user interface of the web version 15.100.09.02.260
Change IMEI
Firmware 22.265.15.01.260 and WEBUI 17.100.05.02.26
Modem unlocking
Instructions on firmware.

Enable USSD

There is no curator in the subject. For questions about filling caps, please contactzzzeprin QMS or moderators section through a buttonunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedSithmaul - 30.03.17, 10:05

[Anyname]

The cap shows the characteristics of the modem, which is sold in Japan and China: e5776s-860. There is also a version for Europe: e5776s-32, with support for frequencies: LTEDD 800/900/1800/2100 / 2600MHz and the Russian version e5776s-22. The most versatile solution is the e5776s-32 version ... in my opinion.

Official user documentation in English.

Post has been editedAnyname - 03.01.13, 00:23

[kea_]

add to description:
Balong 710 chipset ...
access to microSD card content via wifi (in router mode)

firmware update files and control panels are available on the MTS website ...

Post has been editedkea_ - 09.01.13, 13:13

[slavaz]

If there is a kind soul, throw links to the person where to get the original firmware from the device for this body, it’s a miracle after 2 weeks it’s buggy with the WiFi radio and I need to check this MTS bug or it’s an iron problem to carry or exchange. thank !

[rediska13]

Good day, who has this device on hand, please take a picture of the connector for connecting an external antenna.

[VasiliyM]

[rediska13]

VasiliyM,Thank you) in view of crc9, like on E392 / E398.

[PEKOPDCMEH]

[email protected], 19:59

VasiliyM, Thank you) for the kind of crc9, as on E392 / E398.

connector: TS-9

[npodesign]

If you do not use it for a long time, the router stops being visible as Wi-Fi (goes to sleep?). How to make this happen?

[jonotonfoto]

npodesign
So that the modem does not go into power saving mode, remove the corresponding checkbox in the settings. Or just press the button on the case.

[avtonomov]

http://3ginfo.ru/downloads598.htmldownloaded the firmware. Launched. The modem was found.
Then a window appears.


Three attempts to enter. One ruined. Who knows for sure - what should be entered there?

[Farhod30]

avtonomov,
Yeah)
Give IMEI or calculate with a love calculator) he seems to ask Flash Code!

[oneBender]

And this modem current in mts-e is sold ?? Universal eats? **

[Shadow shadow]

oneBender,You are not the topic wrong? Here they talk about the firmware (or rather, it is assumed that they should speak), and your question is rather forgeneral discussion...
But a Huawei e5776s type router (also known as 821ft), which supports our LTE bands (7, 20, and 38), is still valid (?) Sold only in MTS. What is sold to the bourgeoisie, works in other ranges - which may differ from those used in the Russian Federation. However, no one bothers to unlock the MTS router and use it in the networks of other operators - the main thing is that their LTE bands are supported by our router. There will be no compatibility problems on 3G networks, but a less expensive solution can be found for them.

Antiofftop :
Something a little we have firmware here ... here is mycollection:

• E5776s22_Update_21.202.15.01.143 - initial firmware from MTS.
  
• E5776s22_Update_21.202.15.03.143 - official update from MTS.
  
• E5776_Update_21.202.19.01.778 - "native" firmware from Huawei, without operator customization. It seems fresher MTS-nyh.
  
• Update_UTPS1.11.05.143_MAC1.11.05.143 - the initial version of the drivers / "dashboard".
  
• Update_UTPS1.11.06.143_MAC1.11.06.143 - driver / "dashboard" update.
  

P.S.
People, I understand correctly that the firmware to our devices (well, without taking into account operator customization) are the same for all modifications?

[azve]

I run E5776_Update_21.202.19.01.778, at the device search stage it constantly gives an error, tried all the USB on the laptop, did not help. What can be done?

By the way, who knows what data to indicate in the profile for Megaphone and Beeline?

[Shadow shadow]

azveAre the drivers installed?
To install them, you need to run a dashboard setup (from the "disk" that occurs in the system when the router is connected via USB). Well, you also need the Flash code (generated by any calculator for Huawei devices or requested from us inrelated topic) - and it must be entered when the "password" is requested by the flasher.

[azve]

Yes, there is a driver, the device is detected correctly and you can see the previously installed dashboard (when I try to flash it, I naturally turn it off). But it doesn't get to the code request. Error reported: "Error code: 10, Port not found!"

[Shadow shadow]

azveIs it worth it to turn off the dashboards? And, most importantly, why - it is, in fact, no dash, but just a shortcut to the web face of the router.
But if it doesn't work, I can only recommend trying to reinstall the drivers ...

[azve]

Without shutting down the dashboard, the update does not start, swears: "The panel or master is already running, close and try again." I will try to reinstall the driver and accomplish your goal.

[azve]

The update has passed, even the code was not requested, most likely due to the fact that the router is already unlocked. I also installed Update_UTPS1.11.06.143_MAC1.11.06.143. One question remained, after flashing to the router, the MTS design of the web interface remained. So it should be?

[Shadow shadow]

azvePerhaps the dashboard update is to blame ... and indeed it is strange that the code was not requested - my router was also unlocked, but the flash driver asked for the password. And after installing the native firmware, all customization from the MTS was replaced with Huawei, and the color scheme became more pleasant. Something is wrong here ...