> Important!

We strongly recommend to familiarize withRules section "Android - devices"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



DNS S3501 - Discussion | Smartphone, 3.5 "



Rep: (100)
DiscussionDNS S3501
PictureDNS S3501
Discussion пїЅ
  • Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  • To discuss and search for third-party programs / games, use the following sections: Programs and Games .
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  • The results of performance tests of Android devices, see the topic: Benchmark
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
Specifications
Common parameters
Black colour
Model
Model smartphone / phone DNS S3501
Type of
Device Type Smartphone / Communicator
Body type classic
Body Material Plastic
Qwerty keyboard no
Android operating system
Operating range 3G (UMTS), GSM 1800, GSM 1900, GSM 850, GSM 900
Dual SIM support
Mode of operation of two SIM-cards waiting
No support for three SIM cards
Screen
Touch screen there
Type of touch screen capacitive
Multitouch support is
Screen diagonal 3.5 "
Screen resolution 480x320
Screen type color
IPS color screen type
Communications
Internet access EDGE, GPRS, HSDPA
Bluetooth is
Bluetooth Version Bluetooth 2.1
Wi-Fi is
WiFi 802.11n standard
Synchronization with PC is
Micro USB interface
GPS receiver is
DLNA no
Messages
SMS is
MMS is
Calls
MP3 ringtone type
Challenges
Speakerphone is
Multimedia
There is a camera
The number of megapixels camera 2 million pixels
No built-in flash
MP3 player is
Supported audio formats AAC, AMR-NB, MIDI, MP3
Video player is
Supported video formats 3GP, H.263, MPEG4
FM radio is
Headphone jack
Headphone jack type 3.5 mm
Memory and processor
Qualcomm MSM7225A processor model
Number of cores 1
800 MHz processor frequency
The amount of RAM 512 MB
256 MB internal memory
Memory card slot available
Types of supported micro Secure Digital, micro Secure Digital HC memory cards
The maximum amount of memory card 32 GB
Graphic accelerator Adreno 200
Nutrition
Battery type Li-Ion
Battery capacity 1500 mAh
Additionally
Sensors accelerometer, compass, approximation
Battery, charger, microUSB cable, wired stereo heading, user manual
Body, dimensions
Weight 130 g
Width 60.6 mm
Height is 116 mm
12.3 mm thickness
Packed weight and volume
Weight 0.310 kg
0.001034mВі
A photo
Attached Image
Overview

The topic is closed. If necessary, you can open a topic. For all questions regarding the topic contact the moderator subsectionEnlightened grandfather at QMS .

Post has been editedEnlightened grandfather - 18.07.16, 23:59



Rep: (100)
First impressions.
Assembled enough quality - lu is not available, back cover fitted very tight, bright screen, juicy. touch responsive enough. I put two SIM cards at once - MegaFon and MTS, which immediately and showed. The picture on the screen at an angle is not distorted. A lot of pre-installed software, which in my opinion should be removed, but that's not like I can not determine on the basis of the phone has been collected. For the same reason I can not get, and Ruth set recovery, etc., I do not want to experiment because it was the experience of producing bricks, though later resuscitated. Further, the volume is not at the highest level, but not enough to really bad. for now.

By busting buttons while turning on the phone, I found the following: during the on-time holding inc + Volume Down key, enters a mode in fast boot inscription in red on the screen.

Post has been editedberkoff - 29.12.12, 15:52



Rep: (100)
gps test. Including built-in applications on Google's phone I found spreading very quickly, but running Navitel was looking for more than 20 minutes - did not and I got tired of waiting. Then I also ran Navitel several times (and have tried different versions of the program) - the result was similar to the previous, then I launched gpstest and waited until found no more than 8 satellites. After that, he is running Navitel, onaruzhil itself within less than 1 minute.

The question remains open:
1. Connect it to a computer - is detected as 4 hsusb device (VID_05C6 & PID_9026)
2. gain root or at least determined on the basis of the Chinese device was assembled this?

Post has been editedberkoff - 29.12.12, 15:56



Rep: (100)
drivers for the phoneAttached filedriver s3501.rar(3.73 MB)



Rep: (6)
berkoff
Try to get Ruth sbosobom described in the topic of zte v790. in the brick does not turn

Posted on 30.12.2012, 12:35:


Berkoff @ 28.12.2012, 16:07*
By busting buttons while turning on the phone, I found the following: during the on-time holding inc + Volume Down key, enters a mode in fast boot inscription in red on the screen.

usually download mode for the firmware from a computer, try vol + and power. WMS will enter into rekaveri native

Post has been editedangolow - 30.12.12, 12:35



Rep: (100)
angolow @ 30.12.2012, 13:35*
berkoff
Try to get Ruth sbosobom described in the topic of zte v790. in the brick does not turn

This method has probyval. All operations are normal, no freezes, but when there is an inscription in the program, about the fact that the screen devaysa necessary to choose the restaurant - it does not appear a damn and he does not hang works perfectly normally. But there is no RESTORE. Why is it, I can not understand ?!



Rep: (6)
on the same platform still lg optimus l3, Sony Xperia Tipo / Tipo Dual, 965 mts from the same filling, though odnosimochny, and a camera of 5 megapixels, while the progenitor of the Chinese is not found. Android 2.3, HTC Explorer. Try getting Ruth with these models can get. I think the market will soon poyavyatsya many more similar budget phones on this platform



Rep: (100)
So the story is root, SuperOneClick (different versions hang on 5 or 7 step (step) and these different options were combined with different versions of su and the superuser files), DooMLoRD_v4 - the device does not want to respond to his commands that or hang, or simply ignore, continuing to work in the state mode without rebooting where required, z4root - hangs, universal androot - failed! log is as followsAttached fileUniversalAndroot.log(7.95 KB)


Post has been editedberkoff - 30.12.12, 21:47



Rep: (100)
Berkoff @ 30.12.2012, 22:25*
usually download mode for the firmware from a computer, try vol + and power. WMS will enter into rekaveri native

in your case - including + vol + - hangs, or on any screen, no buttons, nothing tight, not responding to anything, only battery saves distortion.
....The morning is wiser than the evening....

Post has been editedberkoff - 30.12.12, 21:52



Rep: (1)
I bought the same smartphone. Sat ... pokuiril komenty on DNS'e ... jambs mostly standard, which means the system, thus it is necessary to change the firmware uniquely ...
Pokamis all hopeberkoff .



Rep: (4)
in rekaveri hit command adb reboot recovery
funhouse image reproduction with the imposition and stripes, but the cursor moves
try at home, it can be properly seen
in any case it is necessary to prepare bottles or patched systems or whatever, there certainly do not know that the regime had rekaveri sense



Rep: (19)
bought
Ruth really all the ways that are described in the topic "Route One-click" failed to get ...
probably save only rutovannaya firmware ...
learn to "Clone" this machine would perhaps what and went ...

Posted on 31.12.2012 10:24:

vladi.t @ 31.12.2012, 13:22*
in rekaveri hit command adb reboot recovery

it makes sense to put a program terminal and in it the command to start?
detail do not share?



Rep: (4)
you need to install drivers for your phone, they are mounted when connecting sdrom
then you can download any "Root exploit" such as this onesuperoneclick
when he unpacked inside there adb folder
starts a command line (Start Run cmd), go to that location and write adb reboot recovery
phone will restart in rekaveri mode



Rep: (100)
In recovery mode really comes, but for one thing! No shit it is not clear in the sense that: firstly, distorted picture, stripes with a shift on, numbers and letters merge, how to say, lizhe fits like a QR-code.



Rep: (4)
Berkoff @ 31.12.2012, 17:19*
In recovery mode really comes, but for one thing! No shit it is not clear in the sense that: firstly, distorted picture, stripes with a shift on, numbers and letters merge, how to say, lizhe fits like a QR-code.

Well, clearly, so my brother is not alone in this respect))) will wait, I'm on the topic apnul China iPhone, there may be who responds
I have a very Alcatel 997D, brother here took a little help, he bought himself 3301S



Rep: (12)
Hello everyone! guys, read on CSN website in the comments that someone is our device flashed firmware from the ZTE V790. now the question is not one of you did not try to flash it and if it tried to write manualchik want to alter poproborvat
Another question: no one decided problmku with third-party headphones are not on the phone? I have when connecting headphones 3 pin (not relatives of devaysa CSN), the device switches itself continuously to music or crashes the window saying that there could not Chota with voice search. switcher music cured by disconnecting the device in the player control from the headset buttons. but with the voice search problem is not solved yet. have any thoughts on this? Well, if estessno hem regular headphones \ headset then the problem disappears, only to me as a lover of less quality sound staff "ears" straight cut ears and listen to them can not be in my opinion. and unsoldering staff ears for replacement speakers themselves like that does not go (no donor with normal speakers, and my dear good vakuumniki as that is a pity.)
even the children did not understand how to enter the bottles of his ... well ... or rekoveri want to merge it with the firmware, just in case, and then try to fill in on the ZTE V790 firmware.

Post has been editedGOBLIN_ART_DIGG - 31.12.12, 19:45



Rep: (100)
GOBLIN_ART_DIGG @ 31.12.2012, 17:57*
Hello! guys, read on CSN website in the comments that someone is our device flashed firmware from the ZTE V790. now the question is not one of you did not try to flash it and if it tried to write manualchik want to alter poproborvat

read a threadI'm there already asked
GOBLIN_ART_DIGG @ 31.12.2012, 17:57*
and unsoldering staff ears for replacement speakers themselves like that does not go (no donor with normal speakers, and my dear good vakuumniki as that is a pity.)

if you are from Voronezh, you can adjust the donor - are on my headphones, whose wires sgryzla dog (bitch :)), and the speakers themselves in excellent condition.
GOBLIN_ART_DIGG @ 31.12.2012, 17:57*
even the children did not understand how to enter the bottles of his ... well ... or rekoveri want to merge it with the firmware, just in case, and then try to fill in on the ZTE V790 firmware.

when the phone is connected to a computer: command stroka->fastboot recovery->phone will reboot just in the aforesaid mode, but there is one thing, to smoke post above will understand.

Post has been editedberkoff - 01.01.13, 14:06



Rep: (12)
chtot or I tuplyu after spree yesterday or I do not know what I'm doing wrong but I kommndnaya line writes the following: "adb" is not vnutreneey or external program, operable program or batch file.



Rep: (100)
GOBLIN_ART_DIGG @ 01.01.2013, 22:17*
chtot or I tuplyu after spree yesterday or I do not know what I'm doing wrong but I kommndnaya line writes the following: "adb" is not vnutreneey or external program, operable program or batch file.

adt-bundle-windows-x86.zip Download and extract the root of drive c: \
Further, the properties of the computer and look for the "Environment Variables"
system variables and change the PATH, during niego not delete comma and add the path to the adb (like if I described, then the path would be:
"The name of the PATH
The value of the variable "are what is required to write; semicolon C:! \ Adt-bundle-windows-x86 \ sdk \ platform-tools \
apply and reboot



Rep: (191)
GOBLIN_ART_DIGG @ 02.01.2013, 01:17*
"Adb" is not vnutreneey or external program, operable program or batch file.

You need to first download somewhere adb.exe with all the required libraries (Android sdk, in many programs to obtain root privileges)

For several days we correspond with a friendberkoff about the root and cwm to fit your device.
The results so far are disappointing - closed many (? All) vulnerability through which you can get Ruth. To remove the images from the sections is not possible without root. DNS company did not bother to put the firmware.
Only one conclusion - require firmware for the device, it is their duty to provide it.

Although there is an option number two: to create from scratch a new kernel, run through fastbut device with this new kernel (fastboot boot) and sew Ruth, remove images from the sections.
That is itself a list of topics and other information, thankberkoff for work:
adb shell cat / proc / mtd
dev: size erasesize name
mtd0: 00a00000 00020000 "boot"
mtd1: 0be00000 00020000 "system"
mtd2: 00100000 00020000 "splash"
mtd3: 00a00000 00.02 million "recovery
mtd4: 02800000 00020000 "cache"
mtd5: 00400000 00020000 "misc"
mtd6: 00400000 00020000 "persist"
mts7: 0a060000 00020000 "userdata"

adb shell ls -a -l / dev / block / mtd *
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock0
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock1
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock2
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock3
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock4
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock5
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock6
brw -------- root root 31,1 0 2013-01-01 17:52 mtdblock7

adb shell ls / data /
open dir failed, Permission denied

adb shell df
Filesystem Size Used Free Blksize

/ Dev 84M 64K 84M 4096

/ Mnt / asec 84M 0K 84M 4096

/ Mnt / obb 84M 0K 84M 4096

/ System 190M 161M 28M 4096

/ Data 160M 72M 88M 4096

/ Persist 4M 772K 3M 4096

/ Cache 40M 1M 38M 4096

/ Mnt / sdcard 12G 3G 9G 8192


adb shell cat /system/build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id = GRK39F
ro.build.display.id = W350_RU_01008_20120912
ro.build.version.incremental = eng.build9.20120913.183605
ro.build.version.sdk = 10
ro.build.version.codename = REL
ro.build.version.release = 2.3.6
ro.build.date = 2012e№ґ 09zhњ € 13zh-¥ zh~џzhњџe >> 18:40:35 CST
ro.build.date.utc = 1347532835
ro.build.type = user
ro.build.user = build9
ro.build.host = build9-OptiPlex-790
ro.build.tags = release-keys
ro.product.model = DNS S3501
ro.product.brand = DNS
ro.product.name = W350
ro.product.device = W350
ro.product.board = 7x27
ro.product.cpu.abi = armeabi-v7a
ro.product.cpu.abi2 = armeabi
ro.product.manufacturer = DNS
ro.product.locale.language = en
ro.product.locale.region = US
ro.wifi.channels =
ro.board.platform = msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product = W350
# Do not try to parse ro.build.description or .fingerprint
ro.build.description = W350-user 2.3.6 GRK39F eng.build9.20120913.183605 release-keys
ro.build.fingerprint = DNS / W350 / W350: 2.3.6 / GRK39F / eng.build9.20120913.183605: user / release-keys
# end build properties
#
# system.prop for surf
#

rild.libpath = / system / lib / libril-qc-1.so
rild.libargs = -d / dev / smd0
persist.rild.nitz_plmn =
persist.rild.nitz_long_ons_0 =
persist.rild.nitz_long_ons_1 =
persist.rild.nitz_long_ons_2 =
persist.rild.nitz_long_ons_3 =
persist.rild.nitz_short_ons_0 =
persist.rild.nitz_short_ons_1 =
persist.rild.nitz_short_ons_2 =
persist.rild.nitz_short_ons_3 =
ril.subscription.types = NV, RUIM
DEVICE_PROVISIONED = 1
debug.sf.hw = 1
debug.composition.7x27A.type = mdp
debug.composition.7x25A.type = mdp
dalvik.vm.heapsize = 24m

#
# system props for the cne module
#
persist.cne.UseCne = none
persist.cne.bat.range.low.med = 30
persist.cne.bat.range.med.high = 60
persist.cne.loc.policy.op = / system / etc / OperatorPolicy.xml
persist.cne.loc.policy.user = / system / etc / UserPolicy.xml
persist.cne.bwbased.rat.sel = false
persist.cne.snsr.based.rat.mgt = false
persist.cne.bat.based.rat.mgt = false
persist.cne.rat.acq.time.out = 30000
persist.cne.rat.acq.retry.tout = 0
persist.cne.fmc.mode = false
persist.cne.fmc.init.time.out = 30
persist.cne.fmc.comm.time.out = 130
persist.cne.fmc.retry = false

#
# System props for the MM modules
#
media.stagefright.enable-player = true
media.stagefright.enable-meta = false
media.stagefright.enable-scan = true
media.stagefright.enable-http = true
media.stagefright.enable-fma2dp = true
media.stagefright.enable-aac = true
media.stagefright.enable-qcp = true

#
# system prop for opengles version
#
ro.opengles.version = 131072

#
# system props for the data modules
#
ro.use_data_netmgrd = true
persist.data.ds_fmc_app.mode = 0

#
# System props for IMS module
#
persist.ims.regmanager.mode = 0

#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master = true

#
# System prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp = true

#
# System prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap = true

#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect = true

#
#system property for Bluetooth discoverability timeout in seconds
# 0: Always discoverable
debug.bt.discoverable_time = 0

#
# System prop to enable / disable OMH. Enabled by default
#
persist.omh.enabled = 1

#System prop to enable ehrpd capability
ro.config.ehrpd = true

# System property for cabl
ro.qualcomm.cabl = 1

#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported = true

#
#System property for FM transmitter
#
ro.fm.transmitter = false

#
#System property for single instance recording
#
ro.fm.mulinst.recording.support = false
#
#System property for msm
#
ro.hw_plat = 7x27a

#
# System props for init time settings
#
ro.bw.settings.time.init = 2012: 0: 1: 0: 0
#
# System props for statusbar display no service (!) When the cell has sim card, but no service.
#
ro.bw.stsbar_noservice_icon = true

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library = / system / lib / libqc-opt.so
ro.config.ringtone = BeatPlucker.ogg
ro.config.notification_sound = OnTheHunt.ogg
ro.config.alarm_alert = Alarm_Classic.ogg
persist.bw.num_match_len = 11
persist.sys.timezone = Europe / Moscow
ro.com.android.dateformat = yyyy-mm-dd
ro.bw.android.ip_prefix = true
ro.bw.homepage =http://yandex.ru/?clid=1872630
ro.bw.cit.compass = true
ro.bw.mainmenu.ishorizon = true
ro.bw.cit.version_hardware = S073M001P200
ro.bw.cit.version_internal = W350_RU_01008_20120912
persist.sys.language = en
persist.sys.country = RU
ro.bw.df_input_method = com.cootek.smartinputv5 / .TouchPalIME
debug.obex.force_srm_capable = false
ro.bw.cit.headset_timer = true
persist.dsds.enabled = true
ro.bw.rus_smart_dail = true
ro.setupwizard.mode = DISABLED
ro.com.google.gmsversion = 2.3_r4
net.bt.name = Android
dalvik.vm.stack-trace-file = / data / anr / traces.txt


By the way, most similar in characteristics to your device is not ZTE V790, sold in Russia, and Vietnamese clone ZTE Viettel V8403. He also android 2.3 also managed to find it under the Management Board boot.img, through which the Vietnamese are Ruth under it.

Post has been editednikitines - 01.01.13, 22:30



Rep: (12)
nikitines @ 01.01.2013, 22:03*
Only one conclusion - require firmware for the device, it is their duty to provide it.

do you think if I go to SC theirs me flush throw firmware or not? I can say in 3 steps from the house of the SC is simple :-) about root, so it's unfortunate that while the solutions are not found, but I think I'll go all the same number 3-5 in the SC and will ask to give me firmware so to speak to the hand . on the results estessno otpishu. even nadopoprobovat just in case they write on the website to add the firmware (which they do vryatli). about the creation of the core: I honestly had never had to deal with the gathering of something under the android and help do not even know what ..
berkoff
about the donor to the ears: I unfortunately (or perhaps fortunately: D) is not from Voronezh. I'm with the Volgograd region with the city of Volzhsky. up to you how far it :-) but also by the way the donor Mr. headphones found in the morning and will have to solder (sleep on it).


Full version    

Help     rules

Time is now: 29/05/20, 19:49