Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
DNS AirTab E75 - Firmware (OS 4.1.1) |
Message#1 18.12.12, 14:44 | |
Dimon4egg [offline] Group: Friendssavagemessiahzine.com Messages 331 Check in: 02.12.12 Google nexus 5 Reputation: 41 | DNS AirTab e75 - Firmware (OS 4.1.1) Possible concept "Teclast" Description | Discussion � | Firmware
Drivers and Utilities Firmware
Instructions Installing the original firmware 1. Download the firmware from the siteDNS, from the same download and driver and utility for firmware. Drivers are only forWin 7/8 x86 / x64 2. We unpack drivers for your OS 3. Install the firmware driver - turn off the tablet, press and hold Volume + (Back) and connect the cable. After that, a new unknown device should be defined in the device manager. We put on it the driver mentioned above (I hope everyone knows how to do it). After the drivers have been installed, the device will be defined as RK3066 Device or something like that. Next, turn off the tablet from the computer and proceed to the next item 4. Unpack the firmware utility and the firmware itself. 5. Run RKBatchTool.exe. In the program we see the window-FW Path click there and select the firmware file. After the firmware is loaded, click Upgrade. 6.All :) CWM installation 1.We downloadCWM 2. Go to the firmware mode - turn off the tablet, hold down Volume + (Back) and insert the cable. 3. We unpack the archive, run RKAndroidTool.exe and press Flash ROM 4. All. In order to enter the recovery, you need to turn off the tablet, hold down the Volume + (Back) button and hold down the power button. After the logo appears, release Thanks for this wayart-exe ATTENTION! Use UPS, if possible! Do not unplug the tablet from the computer / laptop! And always remember - no one is responsible for your actions, except yourself! [/ S] Getting root rights ViaZhuoDaShi If you have an ADB driver installed, then skip the first item. 1.We downloadSuperOneClick, unpack, run, and go to the Advanced tab, click Check Drivers, if there are no drivers, then the program will install them. 2.Connect the tablet in the "Debug USB" mode, but do not connect as a USB drive. 3. Install ZhuoDaShi 4. And download instructions for its use: DKlats Getting ROOT rights Getting root rights without a PC The fastest and easiest way to get root-rights. What to do if you "ripped off" the device with the firmware? (or any other software method) Scraping with MaskRom New Splicing Method Important when flashing! The stock firmware from the site, Custom Editon v1.0.1 and v1.1 cannot be flashed on tablets that have been on sale since April 2013, for which the version of stock firmware v1.00_20130318 and v1.00_20130401. To find out what version of the stock firmware is yours, go to the menu item "Settings">"About the Tablet PC." Curator -dim2603 Post has been editeddim2603 - 25.02.16, 16:02 Reason for editing: for convenience |
Message#42 21.12.12, 11:49 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 162 Check in: 31.12.11 Reputation: 15 | maybe it will help /system/build.prop debug.sf.hw = *. This line is responsible for hardware acceleration. It is needed to speed up the graphical interface. A value of 1 activates it. A value of 0 turns it off. Try it, check it and you will be rewarded. Personally, I have a ripple in the schedule (maybe strong!) |
Message#43 21.12.12, 15:30 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 306 Check in: 07.10.12 Cube U30GT Reputation: 24 | Unpacking the firmware, as well as other devices RK3066 -WINDOW N90 DUAL CORE 2 - Firmware - Official firmware (OS) Regarding the custom, firstly this is a clone of Chinese, and you just need to find a Chinese identical to it, and pull the firmware from it, the DNS almost does not support its tablets, the tablet problems are most likely due to the core, and you need to look for a stable core. Secondly, if there is a CWM, then I advise you to try to roll the official firmware first with a stable kernel, then install CWM, you can select parameter2g, for 2GB for applications -http://yadi.sk/d/eZAI9vYU1MCV2, then through CWM, roll the firmware Deconaminate let's say you can download it from here -http://yadi.sk/d/ORxMwiQx0t1_0all infa taken from here -http://www.flashmyandroid.com/forum/showth...V3-0-(11-23-12)On the same site, there are other firmware for our CWM, even the CM10 is, really I don’t know if it’s completely working there or not, you just need to find the kernel and bootloader from this tablet, and then everything will work fine. |
Message#44 21.12.12, 16:31 | |
Dimon4egg [offline] Group: Friendssavagemessiahzine.com Messages 331 Check in: 02.12.12 Google nexus 5 Reputation: 41 | I accidentally flashed the base from Cuba :) The tablet does not start. What to do now? :) Post has been editedD4G - 21.12.12, 16:33 -------------------- [karatedima] [Dimon4egg] Siemens M35 | Siemens A55 | Siemens S55 | Siemens S65 | Siemens S75 | Nokia N76 | SE K810 | SE W890 | Nokia E52 | Nokia N8 | Google Nexus 4 | Sony XPERIA V | IPhone 4 | IPhone 4S | Xperia acro S | Galaxy S2 | Nexus 5 [/ font] [/ color] |
Message#45 21.12.12, 18:06 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 154 Check in: 16.04.12 Xiaomi Mi Mix 2 Reputation: 15 | Regarding the custom, in the first place, this is a clone of Chinese, and you just need to find a Chinese identical to it, and pull the firmware from it, DNS hardly supports its tablets, tablet problems are most likely due to the kernel, and you need to look for a stable core You say it, but we searched for what we were looking for, and we did not find it, there are tablets for all dns, but for this fig two, even the E74 found its clone. CWM mod is already there, but there is no kernel Although ikhodniki under rk3066 are open, we do not yet have a knowledgeable person here who can compile this core. CM10 starts up under pk, but has too many bugs. I have already demolished cm, I can not do it without Wi-Fi, the replacement of libhardware_legacy.so did not help. if someone wants to try it himself, here is a mini instruction. (I do not answer for the consequences, everything is at your own peril and risk) CM10 under E75 (curve, Wi-Fi does not work, the problem of the wheel is not solved, because the kernel is old) 1) download the archive (the left kernels have been deleted from the archive, so that you do not accidentally request them) 2) copy cm10_n70_20120902.zip to a USB flash drive 3) connect the tablet to the firmware mode (clamp vol + and insert usb) 3) open RKandroidtool and in line 4 specify kernel rom \ kernele75.img (this is the core of the dns firmware, there are no others yet) 4) press flash room 5) the tablet will be cut down, turn it on, devote it to CWM, choose to install a zip archive and select cm10_n70_20120902.zip uploaded in advance 6) after the completion, choose the tablet reboot, the dns screen saver appears first on a white background (it is sewn into the core of the hike), then a circular download cm, then a couple of minutes will be the optimization of the mod files. 7) profit? Wi-Fi does not work, artifacts when changing orientation, the camera is not tested. sound, touch, game screen is fine) the link from where everything was taken, in the same place it seems to suggest how to fix the wifihttp://www.slatedroid.com/topic/41777-romc...for-rk3066-wip/ link to repacked cm10 with the kernel and the parameter under e75http://narod.ru/disk/64679272001.25d4adcce...RK3066.rar.html Post has been editedAUDIMEN - 08.02.13, 07:26 |
Message#46 21.12.12, 20:02 | |
Dimon4egg [offline] Group: Friendssavagemessiahzine.com Messages 331 Check in: 02.12.12 Google nexus 5 Reputation: 41 | Guys, bida, the tablet does not start any way it sewed in a mask, without, batch with a tule and androyd with a tule, nothing, always after uploading the firmware, writes that it cannot flood the firmware ... I also noticed that in the batch it writes Tule after it starts checking the firmware .. . What to do ? Rimont? -------------------- [karatedima] [Dimon4egg] Siemens M35 | Siemens A55 | Siemens S55 | Siemens S65 | Siemens S75 | Nokia N76 | SE K810 | SE W890 | Nokia E52 | Nokia N8 | Google Nexus 4 | Sony XPERIA V | IPhone 4 | IPhone 4S | Xperia acro S | Galaxy S2 | Nexus 5 [/ font] [/ color] |
Message#47 21.12.12, 20:43 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 306 Check in: 07.10.12 Cube U30GT Reputation: 24 | Guys, bida, the tablet does not start any way it sewed in a mask, without, batch with a tule and androyd with a tule, nothing, always after uploading the firmware, writes that it cannot flood the firmware ... I also noticed that in the batch it writes Tule after it starts checking the firmware .. . What to do ? Rimont? Is the green square lit in RKBatchTool? If yes, then go through RKBatchTool with the RESTORE button, with a good USB cable, if the firmware is not flooded, and writes that Download Firmware Fail means a problem with the cable. Post has been editedBugai1988 - 21.12.12, 20:43 |
Message#48 21.12.12, 21:06 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 306 Check in: 07.10.12 Cube U30GT Reputation: 24 | It's just that the CM10 is a curve, because it was not the developers who ported it, as well as craftsmen folk. In general, you can pull out the kernel according to the idea, when you unpack the firmware, using the program that I wrote above, then the kernel.img and bootloader.img appear in the Temp folder, which are necessary for the operation of custom firmware based on CWM. Just when installing CWM, what is posted here, only Recovery and paremeter with a couple of functions are installed, if you pull out the kernel and bootloader and insert it into this CWM, you can specify the path for the necessary files in AndroidFlashTool, then any custom firmware from any devices installed through CWM can It will install, and it will work, since the kernel and bootloader you already have stitched through CWM, and all the drivers and screen resolution will be exactly the right one. Someone try this and do it, unpack the firmware and flashing CWM, specify the kernel and loader from the firmware that you unpack. But this is all in theory, generally at your own peril and risk. Base for Cube, is installed differently, the most basic is sewn together with CWM - the kernel and bootloader, and the firmware is already just a shell with tweaks, and therefore it is one for all devices, and Base is different. The local admin can rip out the kernel and the loader from the firmware from the original devices and sew them in the CWM, just like I can do Andrey_GAV from the Cube U30GT firmware theme, I can't) The cube and your tablet have one iron, but maybe the touch is different, the screen resolution is exactly different, because of this, the tablet simply does not start, since the kernel and bootloader are stitched together with CWM. You can try to find on the same site CWM for the tablet, with similar characteristics, ie with the same hardware, the same screen resolution, then the tablet is likely to start, but I cannot guarantee the operation of the wheel, I need to check, if it does not work, connect the mouse and use miracle prog -Sitronix_CTFUV3.apk(727.72 KB) It seems to be setting up the touch, and it starts to work) But again, this is all not accurate, you also need to take into account that one device has miniHDMI \ Bluetooth, etc., and the other does not, for all of this, drivers are written. In general, I don’t have a tablet, and I’m hardly going to do it, because I own U30GT + Pipo U1, so I can’t check it, but in theory it might work. Post has been editedBugai1988 - 21.12.12, 21:09 |
Message#49 21.12.12, 21:36 | |
Dimon4egg [offline] Group: Friendssavagemessiahzine.com Messages 331 Check in: 02.12.12 Google nexus 5 Reputation: 41 | Check firmware 6 percent and all, Download Firmware Failed !! 11 What the hell else can I do ..?! Post has been editedAUDIMEN - 08.02.13, 07:28 -------------------- [karatedima] [Dimon4egg] Siemens M35 | Siemens A55 | Siemens S55 | Siemens S65 | Siemens S75 | Nokia N76 | SE K810 | SE W890 | Nokia E52 | Nokia N8 | Google Nexus 4 | Sony XPERIA V | IPhone 4 | IPhone 4S | Xperia acro S | Galaxy S2 | Nexus 5 [/ font] [/ color] |
Message#50 21.12.12, 21:44 | |
Novice [offline] Group: Active users Messages 36 Check in: 26.10.12 RoverPad 3W T74L (GF) Reputation: 1 | R423700259746 WebMoney put the current that 100 rubles can I do a screen check =)))) |
Message#51 21.12.12, 22:13 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 169 Check in: 20.07.09 Samsung Galaxy J7 (2017) SM-J730F / DS Reputation: 17 | |
Message#52 22.12.12, 05:29 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 154 Check in: 16.04.12 Xiaomi Mi Mix 2 Reputation: 15 | Bugai1988Please read at least a topic. All this has already been done, sm10 was stitched so prameter and its kernel, boot, sleeve, and the shell from cm10. To rip out the kernel from the firmware is nothing complicated, there are no firmware, only dnsovskaya. After the firmware from the U30GT4 kernel, the tablet did not start, I guess that you must either finally find a Chinese clone and pull out the kernel from there, or they hope for dns and their new firmware. Do I need to reap not one HOME, but on the rocker "back"? No, I'm also a rocker, vol + which. Post has been editedart-exe - 22.12.12, 05:30 |
Message#53 22.12.12, 07:01 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 306 Check in: 07.10.12 Cube U30GT Reputation: 24 | Su **, check firmware 6 percent and everything, b ****, Download Firmware Failed !! 11 What the hell else can you do ..?! Try to roll a simple CWM, just before the firmware, click Erase NAND in AndroidFlashTool. As for the recovery, it usually turns on exactly by means of the volume keys, up or down (mostly up). Download Firmware Failed - this usually means a bad USB cable, I myself like that bricks and then only after changing the cable I was able to flash it. Posted 12/22/2012 7:01 AM: Bugai1988, please read at least a topic. All this has already been done, sm10 was stitched so prameter and its kernel, boot, sleeve, and the shell from cm10. To rip out the kernel from the firmware is nothing complicated, there are no firmware, only dnsovskaya. After the firmware from the U30GT4 kernel, the tablet did not start, I guess that you must either finally find a Chinese clone and pull out the kernel from there, or they hope for dns and their new firmware. If there is Kernel and Bootloader, then just sew them together with CWM, then put Decontaminate, here is the descriptionCube U30GT firmwareIf you put a version higher than 2.0, then it is advisable to make Wipe Data, Wipe Cache and advanced-Wipe dalvik cache before installation Post has been editedBugai1988 - 22.12.12, 07:02 |
Message#54 22.12.12, 07:09 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 169 Check in: 20.07.09 Samsung Galaxy J7 (2017) SM-J730F / DS Reputation: 17 | |
Message#55 22.12.12, 07:33 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 306 Check in: 07.10.12 Cube U30GT Reputation: 24 | [email protected], 11:09 Then you need to fix it in a hat, otherwise I reached this combination, purely by chance. I don `t know why they didn’t try it right away, this combination is standard for all tablets on this hardware. |
Message#56 22.12.12, 08:36 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 169 Check in: 20.07.09 Samsung Galaxy J7 (2017) SM-J730F / DS Reputation: 17 | I don `t know why they didn’t try it right away, this combination is standard for all tablets on this hardware. This is my first tablet, and I bought it not for myself, but for my son for the new year. I wanted to play games and put them under the Christmas tree, and the root and the rest were set up by inertia) |
Message#57 22.12.12, 09:25 | |
Novice [offline] Group: Active users Messages 36 Check in: 26.10.12 RoverPad 3W T74L (GF) Reputation: 1 | The firmware of the device out of the box is fresher than on the site (if anyone has a pull-out firmware and is ready for use, clear out who the thread is and then covered the pile with a prashivka and backups could not do anything with the family HDDD =)))) |
Message#58 22.12.12, 09:51 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 169 Check in: 20.07.09 Samsung Galaxy J7 (2017) SM-J730F / DS Reputation: 17 | bigresing313,I posted a dump somewhere on the previous pages. |
Message#59 22.12.12, 11:37 | |
Dimon4egg [offline] Group: Friendssavagemessiahzine.com Messages 331 Check in: 02.12.12 Google nexus 5 Reputation: 41 | But how to restore it ... -------------------- [karatedima] [Dimon4egg] Siemens M35 | Siemens A55 | Siemens S55 | Siemens S65 | Siemens S75 | Nokia N76 | SE K810 | SE W890 | Nokia E52 | Nokia N8 | Google Nexus 4 | Sony XPERIA V | IPhone 4 | IPhone 4S | Xperia acro S | Galaxy S2 | Nexus 5 [/ font] [/ color] |
Message#60 22.12.12, 12:09 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 154 Check in: 16.04.12 Xiaomi Mi Mix 2 Reputation: 15 | bigresing313, I laid out a dump somewhere on the previous pages. there is no core dump, the rest is less important ( Do you have a jerky cursor move on your tablet or no MB? : rolleyes: turn on the drawing tool (for developers, display touches) and tell me about the results please. if jerky, the distance between the white dots on the line will be the same. |
Message#61 22.12.12, 21:57 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 169 Check in: 20.07.09 Samsung Galaxy J7 (2017) SM-J730F / DS Reputation: 17 | art-exeI have nothing to compare with. I included this graphic painter, sort of like you have on the description - white dots and straight dashes between them. Neither on the photon nor on the click of such a drawing is there at all (on both Android 2.3). |
mobile version | Now: 04/18/19, 15:37 |