The question is no longer relevant. After reading and smoking a forum, I ventured to flash it again - and everything turned out. Many thanks to all those who issued the instructions and provided links to software and more. Nothing would have happened without you.

It does not work, tel. gives an error message.

Djomi I downloaded the wrong firmware image. It is written that you are trying to lower, but you cannot lower.

Greetings to all!
I ask for help in resolving my failure.
I decided to flash my Nokia n9: the firmware was current, the camera did not "respond".
By its product code: 059j204 - downloaded the firmware on the sitehttp://www.mrcrab.net/...Code=059J204.Firmware:DFL61 HARMATTAN 40.2012.21-3 PR LEGACY 001-OEM1-958 ARM.bin + Russian content without cards.
As a result of the firmware (the process in the photo), the phone is loaded to the Nokia logo and then the logo disappears and nothing else. path to firmware in English. I cleaned the phone.
Is it possible to revive nokiu and how to do it (if another firmware is needed, please tell me which one).

RuRassi, It looks like a serious matter, something with certificates ...

But how can this information help me restore my phone? (Yes, Nokiu flashed 2 times - the result is the same)

is not a fact...

RuRassi,
1) No need to rename the firmware file
2) It seems that you are downgrading, but I can’t say more precisely how much instead of the full name you have ape.bin

Posted on 10/21/2015, 13:20:

where did you get the firmware? what product code?
Attempting to replace pr 480 with pr 001

Links for a long time do not work on downloading firmware and content !!!

guys such a problem the phone does not turn on I try to flash through the flasher
C: \ Music>flasher.exe -F "C: \ Users \ Phenom \ Downloads \ Music \ ape.bin" -f --erase-user-data = secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader / phonet) not found, waiting ...
Ping attempt 1 (250 ms)
SU_VERIFY_COMMS_REQ timed out.
Ping attempt 2 (500 ms)
SU_VERIFY_COMMS_REQ timed out.
Ping attempt 3 (1000 ms)
SU_VERIFY_COMMS_REQ timed out.
Ping attempt 4 (2000 ms)
SU_VERIFY_COMMS_REQ timed out.
Ping attempt 5 (4000 ms)
SU_VERIFY_COMMS_REQ timed out.
Ping attempt 6 (5000 ms)
SU_VERIFY_COMMS_REQ timed out.
ERROR: Could not find flashing interface

C: \ Music>pause
To continue, press any key. . .

C: \ Music>flasher.exe -F "C: \ Users \ Phenom \ Downloads \ Music \ ape.bin" -f --erase-user-data = secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader / phonet) not found, waiting ...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.335.1_PR_335
Sending ape-algo image (7096 kB) ...
100% (7096 of 7096 kB, avg. 13806 kB / s)
Suitable USB interface (phonet) not found, waiting ...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 93%, continuing.
Erasing, this may take a while.

How to simply restart a turned off smartphone without firmware?

Post has been editedAndrew_Hikky671 - 02.06.18, 23:11

do you need drivers for the N9?
like I read somewhere
that no drivers are needed

Ilya-TLT-IX,
NCCD is necessary .. all instructions on firmware start from this ... otherwise Windows just won’t know that 9k was connected to it and it won’t start sewing