Assistant
REPLY |
Boxchip A10 Tablet Upgrade | Modernization of tablets running Boxchip A10 processor |
Message#1 11.11.12, 13:33 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | FAQ | Efficiency of games on teXet TM-7025 | Description | Accessories | Firmware | ���� ��� Boxchip A 10 download| Owners Club teXet TM-7025Upgrade Tablets onBoxchip A10 This topic is devoted to all sorts of bullying tablets and their components. Not necessarily with a positive result;) [size = 3]Attention! In connection with the relocation of the topic in the sectionTehnotrepalka, the rules are changing! I ask you to pay special attention to the following points. 1.2 Communicating in the section Tehnotrepalka, please use literary words and expressions. Communicate culturally and politely. Otherwise, the Administration reserves the right to edit your posts. And in some cases - and punish. We live in a civilized world, not in the forest. 1.3 Tehnotrepalka - not a place for flooding. We have, after all, a technical bias. For this there is a section "Breaker". 1.4 Since the message counter in our section is enabled, philosophizing can be interpreted as cheating posts. And punished accordingly. 2.5 It is forbidden to post ads for the sale, exchange and purchase of something. Any trading on the forum is allowed only in the section.Flea market! 3.2 Instead of the words "Thank you" use. If you have less than 15 messages - click on the button.on the message where you were helped, and write thanks. Please note thatgeneral forum rules savagemessiahzine.comnobody canceled![/ size] [size = 2] useful links Warehouse links (see, which can come in handy) Increase built-in ROM Increase RAM RAM Thermores Thermal pads How to disassemble teXet TM-7025 Roverpad 3W T71D board May be useful Explay Informer 702 A simple way to get rid of the glitches of the tach when charging fromsindicat47 Surely everyone is furious that the touch is buggy when charging, but someone really does not want to disassemble the tablet, glue something or even lose the warranty .. THERE IS MEGA A SIMPLE GREAT SUPER SOLUTION TO THE PROBLEM! Further instructions on the photos, everything is simple .. Pros: Faster charging Not buggy touch Minuses: The inability to use the OTG cable when charging. FAQ of the Inventor (not completed) Tools and parsing order teXet TM-7025 We will need: 1) Tablet. 2) Thin plastic card or stationery knife. 3) Phillips screwdriver. 4) Patience, because the process is simple, but for those who cherish the integrity of the body a little nervous. Getting Started. Under the display is better to put at least a sheet of paper, so as not to scratch. [size = 2] List of works User [/ color]the-h1 offers the following modification options teXet TM-7025 There are some suggestions for upgrading this tablet. 1. Naturally the battery, but then it is better to mount it on epoxy, followed by grinding and painting. Looking at the photos of the disassembled think: if you turn the battery in a plane under 90 gr. and put another one next? It will be great if it fits, but not so standard BL-5C Nokiev batteries are excellent on voltage, compact and the capacity is about 1000 m. 2. There is an idea to collect the similarity of a docking station in a case. To do this, you need to test the tablet with a USB hub in more detail, as in different reviews say differently, for example: http://human-oid.livejournal.com/160786.html. 3. If the hub is working normally, then it is possible to build a 3g modem, which is good news. Wi-Fi signal enhancement [attachment = "2232895: 2231378.jpg"] When the Wi-Fi wire touches the battery and / or the silver panel (screen), it catches one stick worse. So what is the point in this. At the same time I decided to close up better (by the way, he made paper tape, he didn’t seem to have any current). I'd add that you can use electrical tape. Insulation About a glitch with a touch: it seems there is again a jamb with a battery (the magnets in the case have nothing to do with it). When you press on the screen (while it starts to touch the battery), it startsechinea . Naturally, when you touch the back cover of the tablet, the glitch disappears (for the hand is a conductor). I'll try to isolate something .. First, of course, I opened the tablet. Gently pushing the ruler under the battery. Then he wrapped it with tape, like a mummy, and put it back. The result of the experiment: doubtful. Touch stopped blunt when charging. But if you strongly (!) Press on the screen, it begins ... Eh, and I have already begun to rejoice .. But I did not calm down, for the Korean blood in me. He unscrewed the motherboard and sealed it to hell with tape, especially where the charge is located. I thought that the connector is to blame (concerns the screen). But here, miss. But I noticed that the touchscreen has become more accurate, because now I can get into small interface elements.Win. Conclusion: I am inclined to think that a mad touch when charging is manifested due to a low-quality adapter I spread my adapter from the wire and the piece from the motherboard. 2-3 days did. This is my first job. If you wrap it completely, then when you press the screen, stains appear, so you covered the tangent part with one layer, and on the touch itself in the place where the battery should be, attached a thin self-adhesive sponge (sold in building and auto shops, cheap) - everything is clear with That, when charging, it is buggy in rare moments, if you do not poke it, but press it. I would like to share my observations with you. So, NEVER, even slightly, don’t drop the tablet, because a “curse” of lost bolts is imposed on it, I don’t even know what it is connected to, but the bolts from the microcircuit that hook it to the base disappear somewhere ( even a magnet). Then, I advise ALL the touch on the back to cover with a thin layer of scotch, in consequence of which increases the accuracy, clarity and smoothness of this, albeit slightly. As for the battery, isolate and sponge, I said, and I want to add that all this needs to be done as a jewelry job, because otherwise you will have annoying divorces, albeit temporary ones (AddsToSh93 Unfortunately, this is true. Having done the work in haste, I got a dozen circles of divorces, if you press the display a little harder than usual) I also want to add: carefully isolate the wiring from the battery and wifi so that they do not touch the wheel in any way. Conclusion: if your hands grow from the right place, then you forget about problems with that. sindicat47 continues to develop a theme about Wi-Fi. So, about the spiral, I'm sorry that I could not take a picture inside because the screwdriver broke. Imagine that “A” is our module, somehow fasten it on the module, then the bottom foil plus the place where it should stand, generally aware of it, it’s better for the unknowing not to tinker. Again, we do everything neatly, so that without divorce. The very essence of the work: as far as I know, copper has a good electrical conductivity, but not a signal, but wifi is nothing more than waves that "pulsate", as it were, the spiral catches these waves and, due to its shape, spreads them better, and foil gives direction to these waves and reflects them from those places where it is not profitable to distribute them .. in general, I tried to explain in plain language. I was not good at catching wi-fi. I decided to make out, to look at the place of the antenna. The antenna was in the right place, under the plastic insert. I decided to conduct an experiment. He peeled the antenna from the cover onto the case, previously wrapped it with thin copper wire, and wrapped it around the wire with ordinary aluminum foil. The remaining piece of wire going out from under the foil, wound into an eight-shaped antenna and stuck on an insulated tape cover, also conducted a continuation of this "antenna" to the plastic insert on the cover and made a small 8-shaped mini-antenna, on top of the foil scotch tape. After these uncomplicated Wi-Fi scams, catching has become much better. looks like this: Under the foil is copper wire. Sorry for the quality. Probably, it was possible to sculpt this wire only on plastic, but I tried to do so - the result is. Usersindicat47 recommends making not eight of copper, but a spiral, and the result should be about one and a half times higher. vvDanilvv continues to improve Wi-Fi reception. After a long search for the best options for improving the quality of reception of Wi-Fi, having tried all the options for performance, he stopped there. The design is as follows: Two antennas are connected and directed at each other, wrapped with wire, wrapped with foil on top, and next to the antennas is the continuation of the wire - a coil under which the foil lies, all this is covered with tape. And from the antenna go two wiring passing through the plastic insert on the cover, for better reception quality. Honestly, I don’t know if these wires are needed at all, we need them and better fix them on the inset. How - you decide. [/ size] Max2898 alex07111971 I warn you that before entering any device I will correct your message a little. Each new device will be listed (preferably with a photo) and the author, of course, too. I ask for help in filling out the caps - send ideas to me in a personal note with a "cap". For each of your modifications with a photo report you get. No one bears any responsibility for the fact that for some reason you did not succeed! Most tablet tampering deprives you of the manufacturer’s warranty! Do everything at your own peril and risk! I would be very pleased to see the user’s signature “Modernization of Tablets forBoxchip A10 " ;) A big request! All posted photos clean under spoiler! Posted 11/11/2012, 13:33: Post has been editedToSh93 - 06.08.13, 21:50 Reason for editing: Minor changes + pipstop |
Message#42 13.11.12, 20:18 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 358 Check in: 13.09.10 Sony Xperia P Reputation: 23 | ainol, There is, clings, but does not respond, now I will try on 9720 :) -------------------- |
Message#43 13.11.12, 20:30 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | I also tried to pick up an electronic pen - refused to work :( -------------------- |
Message#44 13.11.12, 20:35 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 358 Check in: 13.09.10 Sony Xperia P Reputation: 23 | ToSh93, ainol, Well, how to cling to clings (on the graphics tablet, the diode lights up when touched), but nothing happens -------------------- |
Message#45 13.11.12, 20:38 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 21.09.12 teXet TM-7025 Reputation: 12 | ToSh93, Do you need speakers? : D -------------------- |
Message#46 13.11.12, 20:44 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | Well I wrote - tomorrow I will send money) are needed of course! -------------------- |
Message#47 13.11.12, 21:06 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 21.09.12 teXet TM-7025 Reputation: 12 | ToSh93, so I want to please you, I looked at the size inside the animal. they have a good sound and the size is excellent! : happy: so how do I tear off my heart: yes2: Posted on 11/13/2012, 9:04 PM: that's how they are on the case. ;) Posted on 11/13/2012, 9:06 PM: Yes, and to whom it is useful, otherwise no one has unsubscribed ... in general, who parses for the first time, look at the photo where the latching eyes, between them, slip either a card or a scalpel, the case will open without problems. -------------------- |
Message#48 13.11.12, 21:14 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | Scalpel! The card is fat :( Thank) -------------------- |
Message#49 13.11.12, 21:24 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | By the way, on your little animal I got rid of the vibromotor -------------------- |
Message#50 13.11.12, 22:38 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 21.09.12 teXet TM-7025 Reputation: 12 | ToSh93, what for? cool with him;) -------------------- |
Message#51 13.11.12, 22:43 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 21.09.12 teXet TM-7025 Reputation: 12 | pTzvova: rolleyes: if you were in our area, I would have done a train without problems ... -------------------- |
Message#52 13.11.12, 22:56 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | And I needlessly) Only when turned on, buzzed and turned off. Yes, I ate energy too) Actually, therefore, I deleted -------------------- |
Message#53 14.11.12, 12:40 | ||
Local [offline] Group: Friendssavagemessiahzine.com Messages 358 Check in: 13.09.10 Sony Xperia P Reputation: 23 | You would tell that yes how, mb too will turn out) I will throw off the photo of the problem .. added a photo here this end is torn off ... Post has been editedpTzvova - 14.11.12, 12:45 -------------------- | |
Message#54 14.11.12, 17:32 | |
Visitor [offline] Group: Active users Messages 18 Check in: 10.10.12 Reputation: 2 | Gentlemen, how difficult is it to replace (re-solder) the wi-fi module (receiver) in teXet TM-7025? Is it specific, or standard (that is, as in phones and other tablets)? |
Message#55 14.11.12, 17:52 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | [email protected], 18:32 Gentlemen, how difficult is it to replace (re-solder) the wi-fi module (receiver) in teXet TM-7025? Is it specific, or standard (that is, as in phones and other tablets)? Soldering is not a problem .. only I am not sure that it will work -------------------- |
Message#56 14.11.12, 19:19 | |
Visitor [offline] Group: Active users Messages 18 Check in: 10.10.12 Reputation: 2 | Why is it (wi-fi module) some specific? |
Message#57 14.11.12, 21:46 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 191 Check in: 01.03.12 ZTE Grand Memo Reputation: 7 | caesar_76, wi-fi module do you want to solder or antenna? : sveta: |
Message#58 14.11.12, 23:48 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 21.09.12 teXet TM-7025 Reputation: 12 | In general, embodied his idea into reality ... in the empty places added more batteries. one in the connection area of the display, the second side. In total, about 1,500 mA. significantly increased the time of work))) about +1.5 hours. There will be time, I'll take pictures, another keychain made instead of a wire))). Also throw off pictures. As for sealing a loop, in general, you first need to glue the loop from the side where there are no tracks, that is, the pattern of the tracks on top, we glue on the bottom. we sand the p500 cable with a skin, degrease, smear with glue and put a patch (so that the broken ends are in the middle of the patch) wait for drying, then we strip each track in turn, punch it, next. We solder as well — they tipped it, took a hair out of copper (say from headphones), soldered, chopped off with a scalpel. varnished. done under a microscope. here is my know-how))) -------------------- |
Message#59 14.11.12, 23:58 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 21.09.12 teXet TM-7025 Reputation: 12 | need to use flux Posted on 11/14/2012, 11:54 PM: : D And solder Posted on 11/14/2012, 11:58 PM: caesar_76, is it worth changing it at all ... it only starts when bluetooth hangs with it. And so a very good Wi-Fi, the only cable to change to shielded. -------------------- |
Message#60 15.11.12, 10:56 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 358 Check in: 13.09.10 Sony Xperia P Reputation: 23 | As for sealing a loop, in general, you first need to glue the loop from the side where there are no tracks, that is, the pattern of the tracks on top, we glue on the bottom. we sand the p500 cable with a skin, degrease, smear with glue and put a patch (so that the broken ends are in the middle of the patch) wait for drying, then we strip each track in turn, punch, next. We solder as well — they tipped it, took a hair out of copper (say from headphones), soldered, chopped off with a scalpel. varnished. done under a microscope. here is my know-how))) : shok: then I'd rather wait for the MB than you can replace ... -------------------- |
Message#61 15.11.12, 12:55 | |
Local [offline] Topics Curator Group: Curators Messages 333 Check in: 14.09.12 Highscreen Boost 3 Reputation: 45 | [b] Ramil [b \], send a photo - add to the cap) -------------------- |
mobile version | Now: 05/01/19 5:58 PM |