> Important!

We strongly recommend to familiarize withRules section "Android - devices"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Ainol Novo 10 Hero - Discussion | Tablet 10.1 "



Rep: (219)
DiscussionAinol Novo 10 Hero
PictureAinol Novo 10 Hero
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ | Games and programs пїЅ
  • Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  • To discuss and search for third-party programs / games, use the following sections: Programs and Games .
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  • The results of performance tests of Android devices, see the topic: Benchmark
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
MiniFAQ
Stock camera and gallery from Android 4.2
Electrical Circuits Hero
3G modem connection and Internet setup
The operation manual in Russian
Remove the creak of the case
Edit Market
Uninstall Chinese apps
It is convenient to delete Chinese programs with Titanium Backup (you need root).Pre-make a backup!
Bluetooth GPS receiving FAQ
How to enter recovery
1. Turn off the device.
2. Press the "Power" and "VOLUME DOWN" buttons simultaneously. Hold until the recovery (5-10 seconds).
Navigation through the recovery button is "VOLUME DOWN". The UP VOLUME button is used as the INPUT button.
TWRP touch recovery
Upgrade to version 2,3,3,0- downloadhere
Thank you penguinus
Penguinus @ 12/11/2012, 02:34*
A gift from Christian Troy - TWRP recovery. Control from the touchscreen, backup compression and other pleasant things
Download here (mirror on the people), unpack, put the uImage_recovery file in the root of the memory card.
way to install firmware via ADB
Thanks penguinus:
1. Install freshAndroid SDK. We only need adb. If adb was installed earlier, you may need to update it.
2. We connect the tablet to the computer with a USB cable.
3. On the tablet, go to recovery, select "apply update from ADB". We see the inscription on the screen
Adb sideload<filename>"
4. On the computer, open the command line, write
adb sideload "path to the firmware file on disk"
First, the file is poured (see the progress of the upload), then installed the same way as in the case of firmware from the card.
Problem solving
Fix non-working WiFI
Where is RESET and how to use it
ButtonReset is in the hole for microphone and not in headphones !!!Press with a pin / needle / etc.
The charge indicator lives its own life
Calibration option from snoop_maxdog (for which thanks to him)
Link to the original post with pictures
Why do I need to calibrate?
a) if the battery is completely missed. There is either a marriage (throw out the battery), or the batterystats.bin has incorrect data (since the last firmware of the plant).
b) if the sensor "lives its own life", so that there are no SHARP jumps, for example, from 79% to 65%, as in the pictures
[attachment = "2368789: screen_2 ... 904_1357.png"] [attachment = "2368788: jz6tx3wc ... atsg386j.jpg"]
It is such jumps that give rise to the feeling that the battery is not enough.
The entire calibration process will take several days, during whichcan'tuse the tablet for other purposes.
How to do calibration?

Observe everything that is written here - for calibration loses all meaning.
1) Install the program to discharge the battery, for exampleBattery drain
2) In any way, completely discharge the battery - until the device turns itself off. We remove the backlight as much as possible, turn off Bluetooth, WiFi and everything that consumes the battery. We are waiting for the tablet to be turned off.
3) We connect a regular charge, and NOT INCLUDING the tablet - fully charge the battery. On this we need about 8 hours. Why not including that battery resources are not wasted simply and there were no "pauses". As well as charging will happen faster.
4) Now, DO NOT turn off the charging from the tablet, turn it on.
5) Wait until the body is loaded. CHARGER DEVICE DO NOT DISCONNECT !!! For when booting, the system will slightly discharge the battery, and we need a full one.
6) Run any file manager - in our case it is RootExplorer, and delete the same file with the battery calibration data: data / system / batterystats.bin data! (You can also delete a file using Battery Calibration or any file manager)
7) When the battery shows a full 100%, we restart the device again.
8) Well, the last stage - only after the Android is fully loaded - the charger can be disconnected. We turn on the BatteryDrain program, put a tick to discharge using the maximum backlight. AND START.
Everything. Now we wait until the tablet is completely discharged and turns itself off. After that, we repeat everything from point 3 to point 8. And so 3-5 times.
Yes, calibration will take a lot of time, since the battery is not of small volume. But the result will be good.
result
[attachment = "2368824: 7666bd65 ... 5e87992a.png"] [attachment = "2368825: 1ac84297 ... a15a343f.png"]
After the procedures, the discharge of the battery will be smooth. And the more discharge / charge cycles the batterystats.bin file receives, the more accurate the readings will be.
Thank you stavcom
link to post
Problem solving (when the charge indicator lives its own life)
Symptoms:
1. no charge or discharge linearity i. there may be 30% charge after 2 min 70%, 3-5 min 17% i.e. numbers run without a system
2. If you look at the settings>battery then
but. there is no discharge schedule
b. There is no list of applications that consume battery energy.
The solution tested on his tablet recalibrated the battery by means ofВ® Battery Calibrationthis utility
INSTRUCTIONS:
1. connect the tablet to charge
2. charge up to 100%
3. click on the "battery calibration" button
4. restart the phone
5. discharge at 0 .. before shutdown
6. re-charge up to 100% without interrupting charging).
process monitoring conductedMy Battery Drain Analyzer
whatdid not help to solve my problem
1. wipes and flashing
2. Opening the tablet, checking the battery connectors and turning off the battery for 15 minutes
then syst fees.
3. direct access to the battery controller (data reset) via the terminal emulator
What to do if internal memory falls off
It is necessary to format the internal memory in Fat32 64 cluster.
The way to fix problems with the internal flash drive (internal stotage) is "internal memory falls off / disappears", a feature is that in this case cwm cannot format (wipe) the partition:
- remove the microSD card (or remove third-party recovery files from the root section of the card);
- download stock recovery: VOL- and POWER until splash with green droid appears;
- format media partition: wipe media partition;
- restore backup, for example cwm.

More details with pictures
What to do if the tablet is not battery powered
1) jeegiz: "I fixed the problem, the kodg tablet was not working on the battery, I disassembled the tablet and found that the battery chip was crooked on the board, returned it, and again picked up the chip and the tablet worked."
2)
Mrsid88 @ 12/10/2012, 00:18*
I reset the settings when charging is on, turned off charging - it worked! So the problem is not in the chip battery apparently?

3)
airiness @ 12/10/2012, 23:20*
I opened the tablet once again, pulled out the batteries and removed the black tape from them. And voila, one of the cans broke off the contact from the textbag with the controller. Tomorrow at work I will remember which side they are holding onto the soldering iron
Auto-rotate does not work
1. If all sorts of firmware / resets / wipes did not help - tryBMA2BCalibration.apk
2. If 1 point did not help - we smoke:
Ainol NOVO 7 Aurora II / Elf II - Discussion (Post # 15909177)
Ducf @ 09/27/2012, 10:24*
Systematized information about the accelerometer to add to the header. Here's what happened:
The tablets Elf II, Aurora II installed accelerometer Bosch BMA250. Full information on this sensor can be found here:
Bosch BMA250 datasheet
The same sensor is installed in some other devices, in particular, Samsun Galaxy Nexus.
Information about the state of the sensor can be obtained through the registers using the I2C protocol. These registers can be used to control the operation of the sensor, in particular, it can be calibrated.
In order to get information from the registers, I wrote an application. This application allows you to read or change the value of registers, calibrate the sensor, try to solve some problems. Also, to analyze the state of the sensor, you can use the Accelerometer Log program, free from Google Play: Accelerometer Log
Some users are having problems with the sensor. Below I will describe the possible state of the sensor and methods for solving some problems. To demonstrate, I'll give the screenshots and register values. Screenshots do this: hold the tablet vertically, in portrait mode, run Accelerometer Log with default settings. Hold plate 5 seconds, rotated 90 degrees clockwise. Hold for 5 seconds, turn again clockwise by 90 degrees. So I do as long as the tablet does not return to its original position. I make a screenshot (press simultaneously vol- + power button). So we can analyze the X and Y axis, in most cases this is enough. For the analysis of the Z-axis - to put the plate on the table, wait 5 seconds, put the vertical, wait, put down on a table, wait, put vertically screen by himself, wait, put on the table to take a screenshot.
The sensor has a register 0x00 in which the Chip ID value is stored, according to the datasheet its value for our sensor should be 0x03, but as it turned out, not always. I will bind the states of the sensor to the value of this register.
Spoiler (+/-) (1. Register value 0x03)
The value as in datasheet is 0x03. Unfortunately, in my Aurora there is a sensor with a problem, so I will show a screenshot and registers with the Samsung Galaxy Nexus.
--- 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00: 03 32 c0 3b 00 03 80 f7 07 00 00 00 00 00 00 03
10: 08 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 05 00 09 30 81 0f c0 00 14 00 04 0a 18 08 08 10
30: 00 00 70 04 00 00 10 00 00 00 00 00 00 00 00 00
Reduced by 69%
720 x 1280 (39.85 KB)
In the register 0x00, the value is 0x03 and there are no problems with the sensor.
Spoiler (+/-) (2. Register value 0xf9)
I have a tablet Aurora II. When the tablet came, it worked fine, there were no problems, but after a while the auto-rotate of the screen stopped working. Moreover, in the Camera application - the icons are rotated as needed. I read the forum slatedroid (http://www.slatedroid.com/topic/37448-solved-accelerometer-works-fine-but-screen-doesnt-rotate/LexaR user there it is me) and found users with the same problem.
--- 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00: f9 10 00 f8 c0 8c 80 07 1d 00 00 00 00 ff 81 00
10: 0c 80 00 00 00 ff 00 00 00 00 00 00 ff ff 00 ff
20: 05 00 09 30 81 0f c0 00 14 14 04 0a 18 48 08 11
30:00 ff 00 f4 00 00 00 00 00 00 00 00 00 ff 00 00
It is visible that in the register 0x00 value 0xf9, and there has to be 0x03
In Accelerometer log it looks like this:
Reduced by 61%
600 x 1024 (27.84 KB)
And then evident that, if the sensor value is normal axis varies + -g (plate when at rest), in the case of the "problematic" tablet - + -2g. After some experimentation, I found a solution. In case the sensor is 0x0f - therethrough defined measuring range. By default, there is value 0x03, which corresponds to + -2g. Value 0x00 also corresponds to the range + -2g. If in this case enter the value 0x05 (which corresponds to a range of + -4g), then on the "problem" tablet, everything comes back to normal, and starts auto-rotation. Here srinshot, when the register value is 0x05 0x0f:
Reduced by 61%
600 x 1024 (25.71 KB)
So, there is another version of the problem - when "sticks" axis. Those. on one of the axis of no change in value at all. If you look at the registers, the values ​​of the axes is shown in the registers 0x02-0x07. In the case of "sticking" axis we tablet at while rotating in one of the registers of all currently seeing value 0x00 or 0xff. You can try several times to make a soft reset of the tablet, recalibrate, reset the calibration. If this does not help - it will probably only the replacement of the sensor. You can read here: Ainol NOVO 7 Aurora II / Elf II - Talk, Ainol NOVO 7 Aurora II / Elf II - Discussion
Spoiler (+/-) (3. Register value 0xfa)
Treatment 0xfa here: Ainol NOVO 7 Aurora II / Elf II - Firmware (OS 4.0) (Post # 16866615)
There is another option in which the tablet does not see the sensor at all, but it exists and works. Here is an example of the register value:
--- 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00: fa 10 31 69 21 88 01 80 00 00 00 00 00 ff 81 05
10: 0f 00 00 00 00 ff 00 00 00 00 00 00 ff ff 00 ff
20: 05 00 09 30 81 0f c0 00 14 14 04 0a 18 48 08 11
30:00 ff 00 c4 00 00 10 00 00 00 00 00 ff 00 b5
In this case, in register 0x00, the value is 0xfa. Why the system does not see the sensor? Let's look at the source. There is such a file: /common/customer/drivers/misc/bma250.c
Here is a piece of it:
Code
// line 48
#define BMA250_CHIP_ID 3
#define BMA250E_CHIP_ID 249
//...
// line 3524
if (tempvalue == BMA250_CHIP_ID || tempvalue == BMA250E_CHIP_ID) {
249 in decimal notation is 0xf9 in hexadecimal. It can be seen that for the option when ChipID == 0xf9 added a condition, if you add a condition to this line that ChipID == 250, the tablet will see the sensor. Unfortunately, I do not know how to compile the driver, so I can not fix it myself.
Spoiler (+/-) (4. About sensor calibration)
Now for the calibration problem. Some users have complained that the games "car leads to the side" and that exactly was going have to hold the tablet slightly rotated. Well, a similar situation. It comes from the fact that the sensor is not calibrated. See, for example, in my second screenshot in claim 2. There it is seen that when the plate is vertically, X and Y are offset from the axis 0, and Z also. in our sensor is built to calibrate it. Responsible for it registers 0x36, 0x37, 0x38-0x3d. Who cares - in the datasheet there is a lot of detail is painted. Who are not interested - I've done in the program to calibrate the sensor. Here is the Accelerometer Log after calibration:
Reduced by 61%
600 x 1024 (27.55 KB)
Here you can see that the X and Y axes are equal to 0 when the tablet is vertical.
To solve some problems, I wrote a program (I need root to function): BMA + Calibration.apk (199.05 KB) Downloads: 127
For solutions:
Spoiler (+/-) (1. If you have a problem with auto-rotate)
then click "Fix Auto Rotate". Mark the "Fix Startup". If after a while the auto-rotate again stops working (I have a long sleep sensor values ​​are reset and auto-rotation stops working), then mark also select "Fix every time you turn on the screen." On slatedroid was 2 cases, when after a while auto-rotation "corrected" and starts working by itself, without the program. Why is this happening - I do not know. But apparently somehow sensor goes out of its emergency operation.
Spoiler (+/-) (2. Calibration)
Click the "Sensor Calibration" button. Polhode tablet on a flat surface such as a floor or window sill and click "Calibrate the X and Y axis." Thereafter, postavte plate vertically, at 90 degrees. You can use square, book, magazine, to fine-tune the vertical and can be "by eye". After that, click the "Calibrate the axis Z". Everything. The sensor is calibrated. Try to see it Accelerometer Log graphics. If you want to reset the calibration to the original - for this purpose it has a button on the main screen: "Reset calibration". The program for calibrating the sensor 0 may be calibrated sensor + -g for each axis can generally define calibration parameters manually, but it is in manual mode and datasheet. If you really are interested - write me to tell.
Spoiler (+/-) (3. Soft Reset)
reset the sensor to its original state. Calibration parameters are not reset, they must be reset separately.
4. To view the change of registers, there is an item in the “Values ​​of registers” MENU.
5. If it still doesn’t work or if you want more details - write to me in a personal or email (available in the program), and at the same time attach screenshots from Accelerometer Log using the method I described, the value of registers and a detailed description of the problem. I will try to help.
6. How to check the sensor without installing programs. Only performance when auto-rotate: working or not, you can still run the “Camera” - when you rotate the tablet 90 degrees - the icons should turn. But then how lucky, because Almost everyone, initially the tablet worked fine, the problem arose after a while.
7. Well and disclaimer: you use the program at your own peril and risk, I do not bear any responsibility for the results of its work.
The variable ro.sf.gsensorposition from build.prop is responsible for comparing the sensor readings with reference to the axes. Those. the sensor has readings on the x, y and z axes. But the sensor in different tablets can be soldered as you like: the axis corresponds, rotated by 180 degrees, 90, soldered on the back side of the board - and to bind the sensor axes to the axes of the tablet this variable serves. Variable values ​​can vary from 0 to 7. In our tablets, the default value is 2. Here is a description of the possible values:
0: xn = xd, yn = yd, zn = zd
1: yn = xd, xn = -yd, zn = zd
2: xn = -xd, yn = -yd, zn = zd
3: yn = -xd, xn = yd, zn = zd
4: xn = -xd, yn = yd, zn = -zd
5: yn = -xd, xn = -yd, zn = -zd
6: xn = xd, yn = -yd, zn = -zd
7: yn = xd, xn = yd, zn = -zd
Where:
xp - tablet acceleration relative to the x axis;
xd is the sensor acceleration relative to the x axis;
What to do if the tablet turned into a brick
FAQ from shurikk1977:
1. Download the archivehttp://narod.ru/disk/61498835001.1a0e63c90...nbrick.rar.html
2. Downloading the archive with our firmware Ainol Novo 10 Hero - Discussion (Post # 17227826)
2. Format the USB flash drive
3. Using the USB Image Tool.rar, we make a bootable USB flash drive from our flash drive. As an image, slip the image from the downloaded archive. At the exit we have flash drives about 300MB in size.
4. Open the contents of the USB flash drive on your computer and delete the Fire firmware file (zip size is about 200MB) and copy the files Novo1003-Hero-1115.zip, aml_autoscript, u-boot.bin, uImage_recovery as well as the factory_update_param.am file from the downloaded archive to it. in item 1
5. A flash drive in the tablet, turn on, wait about a minute. Voila appeared Recovery. We select the reset factor, choose to delete the cache, select the installation of the firmware,do not get a flash drive, reboot and ... everything is spiked
People. ATTENTION. for those who make a bootable USB flash drive using the USB Image Tool and then can not open it in Windows. The solution is simple. Program USB Image Tool open as administrator.
What to do if the tablet does not turn on / off / hang dead, etc.
First of all Yuzat RESET (Read ABOVE!), And only then ask questions in the subject.
If it does not help and does not turn on, maybe the tablet has turned around - what to do is looking for above
If YouTube is not working
Found onAinola forum
Free translation:
1. Remove the YouTube app
2. If it is not deleted, clean the application cache, make a forced stop and delete again.
3. Install the applicationfrom here
If the above does not work:
1. Remove YouTube.apk from / system / app
2. Uninstall YouTube from applications if it is still there
3. Shovethisin / system / app (pay attention to permishna)
Increase the sensitivity of the wheelbarrow
Anyone who complains about the bad sensitivity of the wheelbarrow. I decided it was simple. In the build.prop file, change the view.touch_slop parameter. The larger the number, the more sensitive the touch (the maximum value of "view.touch_slop" should be no more than 50). BUT do not forget that before restarting the tablet, you must delete your Google account in the settings. After reboot, create again.
NON-NATIVE Headphones do not work
Attention, in order to avoid repetition in the subject of the same:
HEADPHONES are not relatives do not reach to the end of the Hero's nest, tobish Ainolovskie "ears" a little longer. Solutions to the problem:
1) Juzat native ears (they are very personal with the sound)
2) Grind the plastic from the socket so that the jack goes deeper
3) Grind down the plastic from the jack so that it inserts coarser (as an alternative, so as not to ruin the headphones and tablet - buy an adapter dad-jack mother and do the manipulation with it).
Further questions about the headphones are not native to the topic will be deleted without warning.
I can not charge, does not turn on
1) Charger defective.
2) There is no contact in the connectors, from the charger to the battery. Most likely, you need to solder the connector contacts on the tablet's scarf, since the charger connector is heavy due to the ferrite ring and the solder falls off.
3) burned out.
Take the tester to check everything in turn, if there are no skills to carry in repair.
PS If there is no tester, you can check the charger with a car light bulb - 12 volts 25 watts, it should be well lit and not blinking.
Power Supply
The power supply is a voltage of 12V and a current of at least 2A.
On the plug is a plus (+) in the center, and a minus (-) outside.
Before connecting to the tablet, double-check everything with a tester (if possible) so that there are no disastrous incidents.
Connector Replacement, Connector Type
Power controller replacement
Recovery that flushes the touchscreen controller. For those who have broken touch.
Reviews
Poll results
Attached Image

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).


Post has been editedSergey_Ace - 13.10.16, 23:04
Reason for editing: Replacing the controller



Rep: (0)
kugga @ 13.11.2012, 23:15*
After turning off the screen (the button itself or goes out), if you include a couple of seconds, the touchscreen does not work. Absolutely. But if you give him lie down more than a minute after the screen is turned off, then after the touch works.

just an old post but still answer for Ainol Fire has the same problem. Other firmware is not solved at all ... he then skopytitsya, and I sent to China. Maybe those that of the last solved this problem

Post has been editeddartsidius - 15.11.12, 19:11



Rep: (3)
Another review of the tabletby ChinaTablets. Many quality pictures, little text.
battery test 8 hours of video 1024 x 576, the screen brightness of 100%, volume 25%, Wifi Off.
Pros: mild heat under load, integrated Bluetooth, Android 4.1.1.
Cons: requires firmware optimization work.
For myself, said ferrite ring on the charge, in previous models of its debts.

Post has been editedigor.911 - 16.11.12, 14:39



Rep: (219)
igor.911 @ 16.11.2012, 15:30*
battery test 8 hours of video 1024 x 576, the screen brightness of 100%, volume 25%, Wifi Off.

I think it's just an awesome result for Chinese tablets price no higher than $ 200 ...
igor.911 @ 16.11.2012, 15:30*
For myself, said ferrite ring on the charge, in previous models of its debts.

Perhaps because of his absence, and die in tachi Fire / Flame ....



Rep: (29)
Made a free translation of the disassembled tablet of branches material online bbs.ainol.com:http://droidmid.com.ua/blog/manual/85.html



Rep: (3)
Most likely in the plate should touch FT5x06



Rep: (219)
St1m07 @ 16.11.2012, 18:16*
Most likely in the plate should touch FT5x06

Is it good or bad?



Rep: (3)
STV2,
I'm just on the Aurora FT5x. 5mm at the edge of the dead zone, so here I do not know how this will be.

Post has been editedSt1m07 - 16.11.12, 18:48



Rep: (4)
help pensioner !!! I bought a granddaughter. How to flash through the stock Ruth rekaveri.pozhaylusta detail, point by point .zaranee grateful: P



Rep: (219)
kolosok1965 @ 17.11.2012, 9:31*
help pensioner !!! I bought a granddaughter. How to flash through the stock Ruth rekaveri.pozhaylusta detail, point by point .zaranee grateful: P

Put the zip file to the root of the flash drive.
View rekaveri and choose the update zip from sd card.
Select your file.



Rep: (1)
Hey. and who was the last tablet from 7 Ainola and this hero, what better than version 4.1 by 4?



Rep: (6)
alexdracon,
On assurances of Google is still smoother and faster, but on their devaysakh difference I noticed with 4.1
Is that eats more



Rep: (4)
vorontut,
vorontut @ 19.11.2012, 10:14*
so it has 3g or not ????

which promised the adapter and then in the 2nd hero

But, as an interesting "chips", along with the tablet will be available 3G-adapter that can be connected to the device, if necessary, go to the Internet via cellular networks.

Post has been editedatomrocket - 19.11.12, 09:55



Rep: (219)
atomrocket @ 19.11.2012, 10:53*
But, as an interesting "chips", along with the tablet will be available 3G-adapter that can be connected to the device, if necessary, go to the Internet via cellular networks.

I wonder what it would be for the device .... Maybe minimodem ...



Rep: (4)
That's what Ainol translated answered about 2 hero.
"Do not go so fast, the hero does not even have enough reserves
some models are only for advertising only
not at all the warehouse "
Generally it generally can not be



Rep: (0)
The question about the volume of the speaker (s), and how much actually they (the speakers) and where the location? thanks for the answer



Rep: (8)
kuzne4ik537 @ 19.11.2012, 16:06*
The question about the volume of the speaker (s), and how much actually they (the speakers) and where the location? thanks for the answer


Well already on this occasion all chewed in the subject. Here a complete description with photos disassembled tablet, where you can see the dynamics of
Ainol Novo 10 Hero - Discussion (Post # 16998375)



Rep: (2)
Help advice, what to take as a gift to his son Ainol Novo 10 Hero Ainol Novo 7 or Fire. The main purpose of the game, online, youyube, and watching videos. Torn.
For Fire - aluminum chassis, front-facing camera, and as I understand it fixed in the latest firmware problem. Against - screen size.
For Hero - screen size - against bad reviews in this thread on the creaking body, hangs, and reboots suspicion of "traditional", as I understand for new models of Chinese schools, poor front-facing camera.
And in general, people in the know tell me which device is more convenient for the game 7 or 10. Please help advice, I stayed a month, I want to have time to order and wait. His experience zero before the tablet even in the hands not holding.



Rep: (4)
I am answering the questions. The tablet did not polzuyus.kupil vnuchke.s tablets and android encounter vpervye.vpechatlenie horoshee.skripov net.knopki hlipkovat. Screen ponravilsya.batarei hours for 5 6 hvataet.tyazhelye games not stavil.market rabotaet.postavil rut.byvaet does not wake rezhima.dolgim ​​pressing "off." Button solved. Voschem granddaughter like. Other problems have been observed.



Rep: (29)
Dap son years? If the child is 10 inch tablet is too big and heavy thing. A will can be a drag 7 at the time. Fayer looks cooler and costs less. If broken Hero for 50 bucks will be more offensive;) at the fireworks better cameras. And he is no longer a novelty, most stocks have corrected. A Hero dark horse. But I took a Hero at your own risk, for taking the parents as a substitute antediluvian PC. They are young people do not need a bigger screen and drag it anywhere they will not. But for myself, I would have taken something smaller ...



Rep: (0)
Nks18
If you stayed a month and, in general, better to take Hiro. Hiro is available, there is no fire-lizard for a long time and no one knows when there will be.
The very first wanted to take the 7-inch tablet, and then go shopping, he held it in his hands and decided that it is better to 10. 7 nor the movie did not really look or the Internet is not poserfit. About camera I would say that if you want good photos, will have to take a camera, but on any tablet and phone cameras except to play. So this is not a criterion. Regarding quality, it is in any case a lottery. In general, take Hiro with in any Fire does not meet the deadline.


Full version    

Help     rules

Time is now: 12/04/19, 16:58