> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Samsung GT-I9001 Galaxy S Plus - Firmware CyanogenMod 10.x - 11.x (OS 4.x) - 12.x (OS 5.x)
What firmware are you using?
CyanogenMod 12.x
CyanogenMod 12.0 by ADC-Team ROM (ION) LP5.0.2 LRX22G [ 99 ] ** [22,4%]
CyanogenMod 12.1 by ADC-Team ROM (ION) LP5.1.1 LMY47V [ 210 ] ** [47,51%]
Resurrection Remix (CM12.1) v 5.4.x [ 133 ] ** [30,09%]
CyanogenMod 11.x
CyanogenMod 11.0 ROM PMEM KK 4.4.1 KOT49E [ 110 ] ** [24,89%]
Cyanogenmod 11.0 ROM KK 4.4.x KTU84PQ by ADC- Release 17 EOL [ 264 ] ** [59,73%]
EHNDROIX V 10/14/23 [ 61 ] ** [13,8%]
CyanogenMod 10.1-10.2
Cyanogenmod 10.1 ROM ION JB-4.2.2 JDQ39E by ADC-Team - Release 6 [EOL] [ 212 ] ** [47,96%]
Cyanogenmod 10.1 ROM PMEM JB 4.2.2 JDQ39E by ADC-Team - Release 9 EOL [ 162 ] ** [36,65%]
EHNDROIX IV 13.12.2 [ 62 ] ** [14,03%]
Total votes: 442
 



Rep: (1692)
Samsung GT-I9001 Galaxy S Plus - Firmware CyanogenMod 10.x - 11.x (OS 4.x) - 12.x (OS 5.x)

PictureSamsung GT-I9001 Galaxy S Plus [ARIESVE]
Galaxy S 2011 Edition

Description | Discussion | Firmware | CyanogenMod 7 Firmware (OS 2.3) | CyanogenMod 9 Firmware (OS 4.0) | MIUI 2.3 / 4.0 firmware | MIUI 4.1 / 4.2 firmware | AOKP / AOSP firmware (OS 4.x) | Topics for CyanogenMod10 | Accessories | Purchase | Club "GALAXY" | Marriage | Samsung GT-i9000 - FAQ | DevFAQ , Themes, decorations, software modifications for the GT-I9001 Galaxy S Plus
The second part of


Important
The firmware is in beta testing! Relatively suitable for everyday use!
You install the firmware at your own risk, the authors and participants of the forum are not responsible for your actions and their possible consequences! The firmware is not officially supported by the CyanogenMod community.

Samsung i9001 Theme on XDA Developers
Modifications for CyanogenMOD 10.x firmware are discussed in the relevant topic!

Firmware MIUI, AOKP, AOSP (AOSP, Unofficial Thinkingbridge, SlimBean, RevolutionJB, Codename Android, etc.) are discussed in the relevant topics!
For filling caps contact the curator Arhitektor58 in QMS!


Description, screenshots, video ::
Cyanogenmod is an aftermarket firmware for cell phones and tablets based on the open source Android OS system. It has features not found on the official Android device vendor firmware, including the original theme (also known as the T-Mobile Theme Engine), the Free Lossless Audio Codec (FLAC) codec, compcache, a large APN list, OpenVPN client, reboot menu, support for Wi-Fi, Bluetooth, USB-modem. CyanogenMod is the first mobile OS that includes the BFS task scheduler and is a combination of the experimental branch and the official Android source tree. The developers claim that CyanogenMod improves the performance and reliability of the OS compared to the official firmware releases.
CyanogenMod is an incredibly functional firmware that extends the capabilities of your device. It is the most common firmware in the Android Open Source Project (AOSP). Today CM10 is based on Android 4.1.1 (JR003L) Jelly Bean. By AOSP is meant that it is built from Android source codes with minimal use of proprietary modules. Going firmware for a specific device. Because of this, and all existing differences from stock firmware Samsung. ATTENTION: there are no Samsung programs in the firmware,Google apps and it does not support KIES!

The most significant change inJelly bean is new technology project butter designed to make the entire user interface fast, smooth and enjoyable. The technology includes triple buffering of the graphics pipeline in order to ensure that there are no jumps in the frame rate during interface animation, as well as the included vertical synchronization technology.

Attached ImageAttached ImageAttached ImageAttached ImageAttached Image

Video demonstration of work

Attached Image Attached Image

Instructions for firmware:
PC driver
Instructions for installing CM11 since release 15 and CM12
Information for those who have corrupted the data section , and another way.
Installation recovery
Through the recovery:
1. Download the required recovery (CWM orTWR ) from the header and write to the memory card (preferably to external External_SD)
2. Go to stock / old recovery
3. We put a new recovery (which is from item 1) - install zip from SD card - chooze zip from sdcard.
4. Overloadand rejoice.

Via One (For CWM):
0. We putdriverphone, if necessary.
1. Download the file for the OPS field (AriesVE)
2. DownloadingOne (Multi Downloader).
3. Translate the phone in Download Mode
4. We kill all the processes of Kies, disable firewalls and antiviruses (if any)
5. Connect the native short cable to the back USB2.0 (not 3.0 !!!)
6. We put the firmware files into the appropriate fields (file with recovery in the One Package field) Odin and sew.
7. The phone will reboot. We are happy.

Via Quick_Flasher (For TWRP):
0. We putdriverphone, if necessary.
1. Downloadingi9001_Quick_Flasher_v1.4.
2. Connect the native short cable to the back USB2.0 (not 3.0 !!!)
3. Kill all Kies processes, disable firewalls and antiviruses (if any)
4. Run Quick_Flasher and set the recovery file in the appropriate field (Flash a new Recovery) and sew.
5. The phone will reboot. We are happy.

Installing CyanogenMod10
0. We putrightrecovery from the header (otherwise there will be an error)
1. Downloadfirmware file, Google Apps (if needed)and write to the memory card (preferably to external External_SD, which must be obviously working, preferably formatted)
2. Go to the recovery
3. Making Wipe Cache, Wipe Dalvik Cache and Wipe Data (Factory Reset);(not necessary, but it is also advisable to clear the internal Wipe Internal Storage (Format SDCard) card. Not to be confused with external external_sd). Also, the firmware can be written to the card by mounting it from the recovery / mounts and storage - mount USB storage /
4. We put the firmware
5. We put Google Apps
6. Making Wipe Cache, Wipe Dalvik Cache
7. Reboot (download firmware).
8. Go to the recovery (do a reboot in the recovery or classically through shutdown) and do Fix permissions
9. Overloadand rejoice.

10. If after installation the phone goes into recovery itself -sew it(through recovery), orAlternative option.

For updates between versions of the same CM10 firmware / build, you can only do Wipe Cache and Wipe Dalvik Cache and Fix permission.
To avoid additional problems, it is recommended to do all the wipe (Cache / Dalvik / Data / System / SDCard).

Kernel installation:
1. Download and copy the file to a memory card (preferably to an external External_SD)
2. Reboot to recovery and flash file
3. Wipe cache
4. Wipe dalvik cache
5. Reboot (download the firmware).
6. Go into the recovery (do a reboot into the recovery or classic through shutdown) and do Fix permissions
7. Rebootand rejoice)

Modem Installation:
Through one
0. We putdriverphone, if necessary.
1. Download the file for the OPS field (AriesVE)
2. DownloadingOne (Multi Downloader).
3. Download the modem file (with the tar extension)
4. Translate the phone in Download Mode
5. Kill all Kies processes, disable firewalls and antiviruses (if any)
6. Connect the native short cable to the back USB2.0 (not 3.0 !!!)
7. We put the firmware files in the appropriate fields (the file with the modem in the Phone field) Odin and sew.
8. The phone will reboot. We are happy.

Return to previous firmware versions:
at 2.3.6:
-one. Just flashing any firmware 2.3.6 will not work (but if it comes out well, we’ll consider a clean reinstall)!
0. We putdriverphone, if necessary.
1. Downloading multi-file firmware 2.3.6from the cap of this topicand file for the OPS field (AriesVE).
2. DownloadingOne (Multi Downloader).
3. We go into the recovery and do Wipe Cache, Wipe Dalvik Cache and Wipe Data (Factory Reset); (it is also advisable to clear the internal Wipe Internal Storage (Format SDCard) card)!
4. Translate the phone in Download Mode
5. Kill all Kies processes, disable firewalls and antiviruses (if any)
6. Connect the native short cable to the back USB2.0 (not 3.0 !!!)
7. We put the firmware files into the appropriate fields of Odin and sew (morehere initem 4. ).
8. Overload.
9. Next Odin sewwhat do we need, or install recovery and then sew firmware through it.

on 4.0.4
0. We already have a recovery, downloadnecessary firmware.
1. Go to the recovery and do Wipe Cache, Wipe Dalvik Cache and Wipe Data (Factory Reset); (it is also advisable to clear the internal Wipe Internal Storage (Format SDCard) card)!
2. Then we act according to the instructions for installing the firmware we need.

(ATP Alexander757)


Firmware
CyanogenMod12.x - (OS5.x Lollipop) - firmware

Cyanogenmod 12.0 by ADC-Team ROM (ION) LP5.0.2 LRX22G, ROM (ION) LP5.1.1 LMY49F, 3.4.10x Core
CyanogenMod 12.1 by ADC-Team [LMY49F] , Download Dev-Host firmware , Download Gapps
CyanogenMod 12.0 by ADC-Team Beta [LRX22G] , Download Dev-Host , Download Mediafire , Download Gapps , Download Gapps from Mediafire
"Attention! Be sure to format the data section in TWRP 2.8.1.0 in ext4 before flashing cyanogen mode. And NEVER do a data reset in the smartphone settings! ”

Resurrection Remix (CM12.1) v 5.5.x
XDA thread , Download Androidfilehost , Download GApps Minimal Edition
"Attention! Be sure to format the data section in TWRP 2.8.1.0 in ext4 before flashing cyanogen mode. And NEVER do a data reset in the smartphone settings! ”


CyanogenMod11.x KitKat - firmware
LineageOS 11.0 Android 4.4.4

SlimKat OS 4.4.4

CyanogenMod 11.0 by ADC-Team, Android version 4.4.x, kernel 3.4.x
XDA thread. Download from the source, Download GAPPS - Partial translation into Russian
"Attention! Be sure to format the data section in TWRP 2.8.1.0 in ext4 before flashing cyanogen mode. And NEVER do a data reset in the smartphone settings! ”

Unofficial ParanoidAndroid 4.0 (Android 4.4 KitKat), 3.4.x kernel
XDA thread. Download from the source, Download Ya-Disk
"Attention! Be sure to format the data section in TWRP 2.8.1.0 in ext4 before flashing cyanogen mode. And NEVER do a data reset in the smartphone settings! ”

Cyanogenmod 11.0 ROM KK 4.4.x KTU84PQ by ADC- Release 17 (EOL) - Kernel 3.4.x

XDA thread. Download from the source Download Gapps
"Attention! Be sure to format the data section in TWRP 2.8.1.0 in ext4 before flashing cyanogen mode. And NEVER do a data reset in the smartphone settings! ”

EHNDROIX V KitKat 4.4.x v.14.x.x kernel 3.4.x
[ROM] [OTA] [i9001] EHNDROIX V 14.x.x
Nitrox developers theme Download from the source Download Ya-Disk Download GApps for 4.4.4 Download GApps from I-Disk (3in1)
"Attention! Be sure to format the data section in TWRP 2.8.1.0 in ext4 before flashing cyanogen mode. And NEVER do a data reset in the smartphone settings! ”

CyanogenMod10.x Jelly Bean Firmware (Deprecated)
CyanogenMod 10.0
CyanogenMod 10.0 by Ivendor RC2.5, version Android 4.1.2, kernel 3.0.74
XDA thread. Download from the source, mirror on the people.
Description / Features
Basic firmware for other CyanogenMod 10 mods.
  • The firmware is based on previous CM9 firmware, Arco firmware for Galaxy W and CyanogenMod 10.
  • Currently working on the modern 3.0.x JB kernel.


EHNDROIX в„ў II 13.5.5, Android 4.1.2 version, kernel 3.0.74
XDA thread, NitroxDevelopers theme. Download from the source, mirror on the people. Separately availablewhite and black gapps.
Description / Features
Created on the basis of CyanogenMod 10 Ivendor by the Nitrox-developers team. Edited and configured to the smallest details. Designed to give Jelly Bean users the convenience of use!
  • Created on the basis of CyanogenMod 10
  • New theme with new exclusive styles EhndroiX
  • Firmware update directly from device (with integrated OTA)
  • Official bootanimation
  • Google apps in black is strong
  • Apex launcher
  • Flash Player Support
  • FM Radio
  • Send messages from the exclusive EhndroiX app with a very attractive look and new features
  • Beats Audio Equalizer
  • Amazing picture quality thanks to Sony Bravia Engine and better density.
  • Watching HD video over 3G or Wi-Fi on Inverted YouTube
  • Fantastic official EhndroiX wallpapers
  • GPS works in all countries due to automatic satellite search tuning
  • Regular update and development of firmware
  • Titanium backup
  • ... and much more!


RemICS JellyBean v4.2, version Android 4.1.2, kernel 3.0.74
XDA thread. Download from the source, mirror on the people.
Description / Features
Based on CM10 by Ivendor
  • Based on CM10 release 2.5 by ivendor
  • CastagnaITs kernel v11 (non bigmem, normal UV)
  • Samsung Touchwiz UI
  • Themed statusbar
  • Themed lockscreen
  • Themed many apps (Dialer, Contacts, Gallery from 4.2, Browser, ...)
  • Added Samsung Apps like Memo, Taskmanager, ...
  • S3 like sounds, alarms, wallpaper ...
  • Samsung bootanimation


Xperia Z + Release 2.5, version of Android 4.1.2, kernel 3.0.74?
XDA thread. Download from the source, mirror on the people.
Description / Features
Xperia Z +, combination of several mods to provide stock Xperia experience with ivendor's CM10 as the base
  • Xperia z lockscreen
  • Xperia z launcherРЏ
  • Xperia z bootanimation
  • Sony Small Apps: Browser, Calculator, Camera, Music, Clipboard, Toggles (seperate zip flash after first rom boot)
  • Xperia z fonts
  • Xperia Z wallpapers
  • Xperia Z media (alarms, notifications, ringtones, ui)
  • Xperia Z widgets: Album, Clock, Notes, Toggles, TrackID, Weather
  • Xperia Z keyboard (Swype function, theme, ..)
  • Xperia Z apps: Album, Movies, Notes, Walkman
  • Clear audio +
  • Clear bass
  • Clear stereo
  • Dynamic Normalizer
  • Clearphase
  • xLoud
  • Surround Sound VPT
  • Bravia Engine 2 (Only Activated on Album & Movies)
  • Modded settings (Xperia Z lockscreen settings to change lockscreen wallpaper)
  • Xperia Z theme (apply in settings)


PAC-man ROM v19.3.0 v7, version Android 4.1.2, kernel 3.0.74
XDA thread. Download from the source, mirror on the people.
Description / Features
Based on CyanogenMod 10 + ParanoidAndroid + AOKP
  • Based on ivendors jb-3.0-pmem branch
  • compiled with linaro 4.7.3 toolchain by christopher83 -O2 optimization
  • added governor: lulzactive, smartas * V2 (default), savagedzen, ondemandx, interactivex, intellidemand
  • added scheduler: sio, row (default)
  • Vdd level sysfs interface
  • undervolting
  • wlan changes
  • AVS enabled
  • overclocking
  • minor changes

  
GALAXY-XPERIA v3 JB (Arhitektor58), Android 4.1.2 version, kernel 3.0.x


CyanogenMod 10.1-10.2 (Obsolete)
CyanogenMod 10.1 ADC Team ION Release 6, 3.4.x Core

CyanogenMod 10.1 Release 9 (ADC Team), Android 4.2.2 version, kernel 3.4.70

XDA thread. Download from the source.
Description / Features
Created on the basis of CyanogenMod 10.1.
  • Synchronize CM sources (CyanogenMod 10.1 RC5)
  • Updated HAL display to version 1.1 (credits Arco)
  • Added system.prop to change SD card without changing vold.fstab (credits Arco)
  • CM BLN settings in the (Settings ->System ->Notification Indicator) (For test only)
  • Fixed bluetooth MAC address at boot time (credits Arco)
  • Fixed a problem with some games (credits Arco)
  • Removed unsupported fashions and color effects from front / rear camera
  • Kernel v3.4.47 based on Arco kernel
  • Updated light sensor driver and display driver taken from SGSII (credits CastagnaIT)
  • Bluetooth file transfer problem resolved (credits Arco and CastagnaIT)
  • Added support for persistent_ram and ram_console (credits CastagnaIT)
  • Added optimized AES and SHA1 routines (credits CastagnaIT)
  • Filter phantom clicks (credits Christopher83)
  • Fixed a crash when turning off the smartphone and entering a PIN code (credits CastagnaIT)
  • Solved the problem with the discharge of the battery due to the touchscreen (credits Christopher83)
  • Correction of the display voltage regulator (credits Christopher83 and CastagnaIT)
  • Support power management on display driver S6E63M0 (credits Christopher83)


EHNDROIX в„ў IV 13.11.29, Android 4.3.x version

XDA thread, NitroxDevelopers theme. Download from the source Download Ya-Disk. Separately availablewhite and black gapps,GAPPS I-DISK EHNDROIX IV_UniversalS4_StylePack
Description / Features
Created on the basis of CyanogenMod 10.2 by the team Nitrox-developers. Edited and configured to the smallest details. Designed to give Jelly Bean users the convenience of use!
  • Created on the basis of CyanogenMod 10.x
  • New theme with new exclusive styles EhndroiX
  • Firmware update directly from device (with integrated OTA)
  • Official bootanimation
  • Google Apps in black
  • Apex launcher
  • Flash Player Support
  • FM Radio
  • Send messages from the exclusive EhndroiX app with a very attractive look and new features
  • Beats Audio Equalizer
  • Amazing picture quality thanks to Sony Bravia Engine and better density.
  • Watching HD video over 3G or Wi-Fi on Inverted YouTube
  • Fantastic official EhndroiX wallpapers
  • GPS works in all countries due to automatic satellite search tuning
  • Regular update and development of firmware
  • Titanium backup
  • ... and much more!


CyanogenMod 10.2 v4.3.1 (JLS36I) by ADC Team - Release 5 ION - Kernel 3.4.x EOL

PAC-man ROM v23.0.0, version of Android 4.2.2, kernel 3.4.47
XDA thread. Download from the source, mirror on the people.
Description / Features
Based on CyanogenMod 10 + ParanoidAndroid + AOKP
  • This ROM is a combination of the best roms available ParanoidAndroid + AOKP + Cyanogenmod = PAC-man ROM. Why choose one if you can have all.


Unofficial ROOT-BOX Release 5, Android 4.2.2, Core 3.4.54
XDA thread. Download from the source, mirror on the people.
Description / Features
Created on the basis of CyanogenMod 10.1 and AOKP.
    Kangarrow (AOKP) and CyanogenMod (CM) ROM for the Vanilla Rootbox ROM.
    NOTE: It has been released and it has been released. However, it has been expected to be fixed in the upcoming updates as development progress.
    Here is the complete list of key features supported by Vanilla RootBox v3.8 ROM:
  • AOKP Features
  • CM Profiles
  • Per App DPI
  • Per App Tablet UI
  • Per App Language
  • OTA Updates - Goo Manager
  • Navigation Bar Color
  • Camera: Save to external memory
  • Phone: Advance Phone Settings (Vibrate on Answer, Every 45 Seconds, On Hangup and On Call Waiting)
  • Phone: Noise Suppression
  • MMS: Message rate alerts (Modify SMS message limit for alert)
  • MMS: Fully Customizable MMS Theme
  • MMS: Soft Keyboard Type (Emoji, Enter to Send, Enter for a New Line)
  • Home button call answer (Accessibility Option)
  • Variable size lockscreen
  • LCD Density Changer
  • Low Battery Warning (Pop-up & Sound, Pop-up only, Sound only, Off)
  • Option to control cursor in text fields using volume keys
  • Disable Fullscreen Keyboard (Landscape mode)
  • Expanded Desktop
  • Hold back to kill
  • CRT Animation (Screen On / Screen Off)
  • Lockscreen Shortcuts (Paranoid)
  • Pie (Paranoid Android)
  • Lockscreen Targets (CM)
  • Screen Security Features (Unlock options: Quick Unlock, Delay Screen Lock, Menu Unlock, Home Unlock)
  • cLock (Chronus)
  • Option to disable sound when adjusting volume
  • Launch Music app on Headset connection
  • Hardware Keys Remapping
  • Lockscreen Hardware Keys Remapping "


ParanoidAndroid 3.99, version of Android 4.3, kernel 3.4.60
XDA thread. Download Ya-Disk.
Description / Features
Created on the basis of CyanogenMod 10.1 and AOKP
  • The firmware is based on the source code AOSP, CM, AOKP.


NEXUS4 Realise1 (Fernando_buck), Android 4.3.1 version, 3.4.x kernel

ROM by Fernando build 1 (Fernando_buck), Android 4.2.2 version


------ Obsolete -------
Unofficial Baked Blackbean 9 Beta 7, Android 4.2.2, Core 3.4.48
XDA thread. Download from the source, mirror on the people.
Description / Features
Created on the basis of CyanogenMod 10.1
  • Fully rebased to latest android-4.2.2 sources
  • Baked Settings (clone of aokp’s rom control made our way)
  • Includes Powerwidgets (cm10.1) may be removed in the future.
  • Includes CM’s custom led control (cm10.1)
  • Lockscreen shortcuts 5 phone 8 tablet (cm10.1)
  • LockClock widget app cloned from cm10.1 and modified by baked
  • Full customized Mms app (baked)
  • Includes DSPManager (cm10.1)
  • Includes CMFileManager (cm10.1) inverted of course
  • All system apps and gapps fully inverted for your pleasure (baked)
  • Many many more features



Google Applications, Core, Recovery
For EHNDROIX, RemICS, CyanogenMod 10.1 (davidteri91), Unofficial Baked Blackbean 9, CyanogenMod 10.1 Release 1 (ADC Team) and possibly some other firmware you need to install their native Google Applications. Check, please, their presence in the developer forums !!!

Google Apps on 10/11/2012 , only for Android 4.1.2 (second link) ( on the people )

Google Apps 01/03/2013 for Android 4.2.2 only (first link) ( on the people )

Latest Google Apps on 06/28/2013 with multi-dpi-market , only for Android 4.2.2 ( on the people )

Theme about black GApps

Kernels
Attention, kernel firmware may result in partial or complete inoperability of your firmware! If you are not sure, use the "stock" core!
Always make a backup, but you can also go back and flash the "stock" core back.
Important! If you use "heavy" applications on the core with overclocking and simultaneously charge the phone -the probability of burning it is nearing 100%!!!

----------------------------------------------

K ^ Kernel 3.4.110 v4.0 for LP 5.1 [24/01/2016] [EOL]
[KERNEL] [3.4.108] [LP-5.1] [ION] K ^ Kernel 3.4.108 v3.0 for LP 5.1 [12/08/2015]
[KERNEL] [3.4.94] [KK] [ION] K ^ Kernel 3.4.94 v2.4 for KK 4.4 ION + PMEM ADSP [06/25/2014]
Download cores 380,388,398,406MB from Mediafire
[KERNEL] [3.4.88] [ION]K ^ Kernel 3.4.88 v1.5 for JB 4.2.2 ION + PMEM ADSP [01/05/2014]
Download from the source Download from the forum
[b] [KERNEL] [3.4.88] [KK] [ION]K ^ Kernel 3.4.88 v1.8 for KK 4.4 ION + PMEM ADSP [27/04/2014]
Download from the source Download from the forum
[KERNEL] [3.4.82] [KK] [ION] K ^ Kernel 3.4.82 v1.6 for KK 4.4 ION + PMEM ADSP [01/03/2014]
Download from the original stock Download kernels 348,356,366,374MB from MediaFire Download kernels from the forum
[KERNEL] [3.4.98] [JB] [ION] K ^ Kernel 3.4.98 v1.7 for JB 4.2.2 ION + PMEM ADSP [07/12/2014]
XDA thread Download from MediaFire Download from the forum
[KERNEL] [3.4.98] [JB] [ION] K ^ Kernel 3.4.98 v1.4 for JB 4.3 ION + PMEM ADSP [07/12/2014]
XDA thread Download from MediaFire Download from the forum



Miscellanea:
Description of governors and sheduler and still

Recovery:
TWRP 2.8.1.0 recovery - Recommended, currently relevant for KK / LP firmware
TWRP 2.8.1.0 Repartitioned
[RECOVERY] CWM & TWRP by ADC Team (Full Fixed !!) - Recommended, currently relevant
TWRP 2.7.1.0 (Full Selinux support)
CWM 6.0.4.9 No Touch (Full Selinux support)
XDA thread
TeamWinRecovery v2.6.3.0
ClockWorkMod v6.0.3.8 No Touch
For devices with damaged EMMC - Flashable ZIP for BRICKED DEVICES (ALREADY BRICKED eMMC)

For installation via CWM
TeamWinRecovery v.2.5.0.0 [Touch] - test recommended for cm10.1
TeamWinRecovery v.2.3.3.0 [Touch] - recommended, stable
TeamWinRecovery v.2.2.2.1 [Touch] - basic, stable
Recovery TWRP v2.6.3.0 by ADC Team
ClockWorkMod Touch 6.0.3.1 (touch version), ClockWorkMod Touch 6.0.3.1 (NOT touch version) test (ClockWorkMod Touch 6.0.3.2 (touch, patched For Bricked EMMCs))
ClockWorkMod 5.5.0.4 - does not see external file storage
CWM FAQ
TWRP FAQ(for problems remove /sdcard/TWRP/.twrps)

To install via Odin Multi Downloader / Quick_Flasher
ClockWorkMod 6.0.3.0 (under Odin Multi Downloader)
TeamWinRecovery v.2.2.1 [Touch] - (under Quick_Flasher)
ClockWorkMod 5.5.0.4 (under Odin Multi Downloader) recommended stable
(we insert the md5 file into the OnePackage field)

What works / does not work:
Information is generalized and may not be accurate, depending on the specific firmware / kernel!

Android 4.1.x based firmware Everything works except:
  • Buggy panorama in the camera

Bugs:
Graphic trash on the screen after shooting a panorama.


Android 4.2.x firmware. Everything works except:
  • Internet distribution by USB (?)

Bugs:
Graphic trash on the screen after shooting a panorama.

Will not work:
  • Radio (use third-party applications, Spirit FM Free, Audio->Method = "qdsp5v2 Altern")
  • TV-out (not supported by Android 4)


Add-ons for CyanogenMod10 firmware

Questions and answers, miniFAQ
Firmware:

Question: How to enter the recovery?
Answer: In the off state, press "Vol +" + "Power" ("Power" hold until the inscription "Samsung" appears; "Vol +" hold for longer, until the inscription "Samsung" disappears)
If you have a box and a droid, click on the menu button (left touch button).

Question: The phone does not overload in recovery if you select the corresponding item in PowerMenu (hangs on the inscription "Samsung")?
Answer: In the menu "Settings - Sound" remove the checkbox "Sound of clicking on the screen." (it is not joke)

Question: How to enter DownloadMode for firmware?
Answer: In the off state, press "Vol-" + "Home" + "Power" (Hold until the droid appears)

Question: After a failed firmware on the phone screen>>>>!>>>>comp "what to do?
Answer: Follow the instructions for returning to 2.3.6 (ie, sew it with Odin), then from scratch, sew again SM.

Question: When choosing zip with firmware in recovery, I get the error "Status 7".
Answer: For CyanogenMod firmware, you need to put a special recovery from the header.

Question: Do not boot firmware. How can I upload another firmware file to my phone without using a card reader?
Answer: We go into the recovery, in the section Mounts and storage, and select Mount USB storage (disconnect only after safe removal in the OS!).

Question: What are the "No OC", "OC / UV", "OC / Extreme UV" cores from CastagnaIT and which one is better to install?
Answer: "No OC" - without overclocking, fits all;
"OC / UV" - with overclocking up to 1804 MHz, and lower voltage (for energy saving), it is probably suitable for all phones. Acceleration eats a lot of energy!
"OC / Extreme UV" - with overclocking, and a very low voltage, suitable for almost all phones (check yourself for any shutdowns, freezes, etc.);

Question: I do not know which core is better to flash.
Answer: In this case, do not flash other kernels, stay on stock and will notlargeproblems.

Question: What is FULL WIPE?
Answer: Full cleaning of the internal, external (SD card) and service memory, details - here .

Question: Wifi does not work, what to do?
Answer: First you need to make sure that the phone does not see any networks at all (street, neighbors - walk around, look). If he sees others, put the wireless network mode "bgn mixed" in the router. When configuring WiFi, use WPAWPA2 encryption. Also, in the router and in the phone (!) In the Wi-Fi settings, you should set your region correctly. (You can still try "Wi-Fi fix")

Question: GPS doesn’t work or doesn’t work well
Answer: For fast and full-featured GPS operation, the phone must have Internet access and Wi-fi enabled. Put the program Faster fix (available from the market) and set up your region (for Russia, preferably - "Russia" or "Asia", for Ukraine - "Europe").

Question: The phone spontaneously turns off, reboots.
Answer: 1. Firmware installed incorrectly (without all wipes). 2. Installed a UV or ExUV core that is not supported by the phone’s hardware. 3. The battery is faulty (swollen).

Functional:

Question: How to put your melody or other sounds?
Answer: In the root of the internal memory to create a folder media / audio (/ sdcard / media / audio), and in it the folder: notifications (notifications), alarms (alarm clock), ui (interface), ringtones (ringtones). Another option is folders (notifications, alarms, ui, ringtones) in the root of the internal memory card. Record a melody in the desired folder, set permissions.

Question: Why does the melody / ringtone play only once, how to make it play continuously?
Answer: In the properties of the melody file you need to add the tag "ANDROID_LOOP" with the value "true" (see here) .

Question: How to get Root rights?
Answer: In CyanogenMod firmware, Root rights are available by default, when they are needed. SuperUser will ask you for permission.

Question: I can not find an SD card in the file manager, although information about it is available and files from it are available in the gallery, player ...
Answer: External SD to / emmc, and internal SD to / sdcard

Question: How to put 3G / WCDMA mode only?
Answer: We dial in the dialer * # * # 4636 # * # *, select WCDMA only, go back, after about a minute the phone switches to WCDMA only mode.

Question: Where to enable closing the application by holding the Back button?
Answer: Settings - For developers - Closing applications (checkbox).

Question: How to assign a call termination to the Power button?
Answer: Settings - Accessibility - tick the "Power button ends the call"

Question: How to make a screenshot?
Answer: Hold Vol- and press the Power button.

Question: Where to view the numbers on the SIM card?
Answer: In the standard contact manager, they can only be imported.

Question: Do not like or lack the functionality of a standard camera?
Answer: Install a third-party camera (from the market or program directory ).

Question: On CM 10.1, the USB MassStorage does not work when connected to a computer.
Answer: In settings->Memory ->Menu button ->USB Computer Connections ->Select USB drive (UMS)

Question: How on CM 10.1 to enable in the settings the menu items "Performance" and "Developer options"?
Answer: In settings->About phone ->Build number tap 7 times.

Miscellanea:

Question: The computer does not see the phone’s flash drive when connected, and the task manager has an unidentified device “SAMSUNG_Android”!
Answer: Not installed driver ( instruction )!

Question: How to change the DPI?
Answer: In the file manager (Root access mode), in the / system folder, the build.prop file (edit) find the line ro.sf.lcd_density, for example, you can change 240 to 210 (save and reboot) ( or so ). But, such an operation affects the performance of many programs!

Question: How to swing and calibrate the battery?
Answer: The first 2-3 times after buying a new battery, you need to fully charge and discharge the battery (without recharging!) - it will pick up the maximum capacity. In the future, the buildup is not needed. As for calibration, such a procedure is simply does not exist .

Question: Why does the battery consume so much?
Answer: The first 1-2 days after the firmware can accelerate the discharge of the battery due to the activity of some processes in the OS and the kernel.

Question: The battery should sit down in a matter of hours, the phone is warm in the vicinity of the camera and hot while charging!
Answer: Due to a glitch / installed third-party program, the phone processor runs at maximum frequency. Most likely, such a program must be removed.

Question: The battery does not sit down for 3-5 hours, or does not reach half a day, in the statistics of the use of the battery it can be seen that it is constantly active!
Answer: We try fix for deep sleep .

Question: I can not find a market or add a Google account
Answer: No Google Apps Package installed. You can take from the cap.

Question: What are Gapps and what are they for?
Answer: Gapps are Google apps and services (e.g. Market, Maps, GMail). Initially, they are not added to the firmware (under the license of Google, developers are not allowed to do this). GApps need to be installed independently after each update.

Question: After the end of the call itself opens a Google or Internet search.
Answer: Install a kernel with support for the filter of phantom clicks (see kernel functionalities preferably on the developer sites) + install the PKF Manager from the link from the header.

Question: Why does the network icon change color after connecting to the Internet (from gray to blue)?
Answer: Blue color - connection to Google servers. You can disable the check only by turning off the background data transfer.

Question: Regular player does not play AVI files
Answer: There are no AVI codecs in the firmware - the CyanogenMod team has no right to add them. they are proprietary. When developing CyanogenMod, only OpenSource is used. Use alternative video players.

Question: The program XXX does not work.
Answer: Check the compatibility of the program with Android 4.1 Jelly Bean. Most likely, this is the problem of the application, not the firmware. You can also try in "Settings - Applications - All - Problem Application - Erase Data."

Question: Program XXX is not available in the Market. "Device not supported"
Answer: The program may not be adapted for Android 4.1 Jelly Bean.

Question: Almost all programs disappeared from Market !!!
Answer: Probably, you have a non-standard DPI value, set to 240.

Question: What programs can be safely removed from the firmware?
Answer: See here - stock Android programs . How to delete - here !

Question: When will Samsung make Jelly Bean firmware for SGS +?
Answer: Never.

The basis is taken from the FAQ by CyanogenMod 9, for which many thanks to the curators of the topic.
FAQ will be filled over time. In addition, you can also search for a solution in the topic header.CyanogenMod 9, but note that the fixes from it will not work, make a backup before the experiments!


Theme rules:
0. Before asking a question, read:
Forum Rules, Rules section "Android - firmware", Android OS FAQ, Glossary .
It is also useful to read the cap and, especially,use search . Respect your and other people's time.

1. This topic only discusses CyanogenMod 10 JellyBean for Samsung Galaxy S + (GT-I9001), its parts and other firmware based on it,except MIUI, AOKP, AOSP (AOSP, Unofficial Thinkingbridge, SlimBean, RevolutionJB, Codename Android, etc.)
2. Messages can and will be deleted without warning if they contain:
  • A question, the answer to which is in the header or in the FAQ in p.
  • question about the date / release date of any firmware / program
  • question about which firmware / kernel is better and baseless answers to such questions
  • discussion of a third-party program or game. Various utilities are not removed, but are not discussed.
  • pictures are not under the spoiler
  • requests to pour something somewhere (only those that will be put in the header)
  • laying out screenshots of synthetic benchmarks and phone time not supported by theory
  • messages containing phrases like "from me +", respectively, paragraphs. 5.1. 5.2. Rules

3. If you want to receivespecificAnswer your question, formulate it accordingly (for example: Problem description + actions that led to it + firmware version, kernel (overclocking?) ... etc) - there are no fortunetellers, mediums and clairvoyants on the forum.Ideal - your full config in the signature (do not forget about the three-line limit)

4. If you want to post a firmware / mod and so on. follow these rules of publication:
  • Write the full name and purpose (version of the target system / firmware)
  • Give links to the source, download, and if possible, make a mirror on the people
  • Give a description and / or changes, very desirable in Russian (machine translation will not work)
  • For specific components (tweaks, mods, fonts, etc.) let's install instructions
  • Hide text arrays under spoilers

Poll results!
Attached Image

Attached Image

Attached Image

History of changes caps
11/04/2013 - Updated Exndroix IV 13.11.5
04/11/2012 - Updated Nexus 4.3.1
10/28/2013 - Updated K ^ Kernel 3.0 / 3.4 core
10/28/2013 - CIT 12.5 Core Updated
10/23/2013 - Updated Exndroix IV 10/13/23
10/7/2013 - Updated Exndroix IV 10/13/7
09/29/2013 - Added Recovery TWRP v2.6.3.0 by ADC Team
09/08/2013 - Added CyanogenMod 10.2 by ADC
08/09/2013 - Updated by K'Kernel v.2.1
09/08/2013 - Updated ParandoidAndroid 3.99
09/08/2013 - Updated Phenom v.4.8 kernel
08/08/2013 - Updated CIT core 12.4
09/07/2013 - Updated CyanogenMod 10.1 by ADC Release 6
09/05/2013 - Updated Fotocamera Android 4.3 For CM10
09/03/2013 - Updated EHNDROIX в„ў IV 13.9.2
08/31/2013 - Updated NEXUS4 realise1
08/31/2013 - Updated CyanogenMod [ROM JB 4.3 JSS15Q]
07/29/2013 - Updated CyanogenMod 10.1.1 Release 5.0 (davidteri91)
07/28/2013 - Updated CIT core 12.3
07/27/2013 - Updated Unofficial ROOT-BOX Release 4.7
07/25/2013 - Updated CyanogenMod 10.1.1 Release 5 (ADC Team)
07/25/2013 - Updated CyanogenMod 10.1.1 Release 5 Core
07/23/2013 - Updated CyanogenMod 10.1.1 Davidteri91 core
07/23/2013 - Updated CyanogenMod 10.1.1 Release 4.7 (davidteri91)
07/21/2013 - Updated Phenom Kernel v4.4 kernel for CM10.1 [4.2.2]
07/18/2013 - Unofficial ROOT-BOX Release 4.6 updated
07/18/2013 - Updated EHNDROIX III 13.7.17
07/17/2013 - Updated CyanogenMod 10.1.2 Release 4.6 (davidteri91)
07/16/2013 - Updated kernel K ^ Kernel v1.7
07/14/2013 - RemICS JB v4.2 Updated
07/14/2013 - Updated Unofficial ROOT-BOX Release 4
07/14/2013 - Updated Paranoid Android 3.67
07/14/2013 - Updated broodkernel 4.5 core
07/14/2013 - Updated EHNDROIX III 13.7.9
Earlier
08/07/2013 - Updated K ^ Kernel 2.4 / 1.6 kernel
08/07/2013 - Updated Phenom Kernel v4.3 kernel
08/07/2013 - Updated CyanogenMod 10.1 Release 4 (ADC Team)
08/07/2013 - Updated CIT core 12.2
07/07/2013 - Updated K ^ Kernel 2.3 / 1.6 kernel
07/05/2013 - Updated CyanogenMod 10.1 Release 3 (davidteri91)
01/07/2013 - Updated CIT core 12.1
01/07/2013 - Updated K ^ Kernel 2.3 / 1.5 core
01/07/2013 - Updated CyanogenMod 10.1 Release 3 (ADC Team)
01/07/2013 - Updated CyanogenMod 10.1 Release 2 (davidteri91)
06/29/2013 - Updated CyanogenMod 10.1 Release 1 (davidteri91)
06/28/2013 - Updated GALAXY-XPERIA v2 JB
06/25/2013 - Updated CyanogenMod 10.1 Beta 11 (davidteri91)
06/24/2013 - Updated Phenom Kernel v4.0.6 Core
06/24/2013 - Updated K ^ Kernel 2.2 core
06/23/2013 - Updated EHNDROIX III 13.6.24
06/23/2013 - Updated CyanogenMod 10.1 Beta 10.5 (davidteri91)
06/23/2013 - Updated K ^ Kernel 1.4 core
06/23/2013 - Updated CyanogenMod 10.1 Release 2 (ADC Team)
05/21/2013 - Updated Unofficial Baked Blackbean Beta 7
06/21/2013 - GApps updated on 06/07/2013
06/21/2013 - Updated Unofficial ROOT-BOX Beta 10
06/21/2013 - Updated Paranoid Android 3.60
06/21/2013 - PAC-man ROM v23.0.0 has been updated
06/21/2013 - Updated GALAXY-XPERIA v2 JB
06/21/2013 - Updated CyanogenMod 10.1 Beta 10 (davidteri91)
06/21/2013 - Updated K ^ Kernel 1.3 core
06/21/2013 - Updated Phenom Kernel Core v4.0.3
06/10/2013 - Updated Phenom Kernel v4.0.2 Core
06/10/2013 - Updated EHNDROIX III 13.6.11
09/06/2013 - Updated K ^ Kernel 1.1 core
09/06/2013 - CIT 12.0 Core Updated
09/06/2013 - Updated Phenom Kernel v4.0.1 Core
09/06/2013 - Updated CyanogenMod 10.1 Beta 7 (davidteri91)
06/09/2013 - Added CyanogenMod 10.1 Release 1 (ADC Team)
09/06/2013 - Updated GALAXY-XPERIA + JB
02/06/2013 - Updated Paranoid Android 3.15
02/06/2013 - Updated PAC-man ROM v22.4.0
02/06/2013 - Updated CyanogenMod 10.1 Beta 6.4 (davidteri91)
05/30/2013 - Updated CyanogenMod 10.1 Beta 6.3.5 (davidteri91)



Post has been editedArhitektor58 - 22.02.19, 08:08
Reason for editing: added LineageOS



Rep: (113)
here is the first alphaXDA-Developers theme
changelog
butter works at 100%
headphones work
earpiece works
microphone works flawlessly
updated latest updates cm10

Post has been editedmurad777 - 30.09.12, 12:32



Rep: (15)
Video work CM10 -http://forum.xda-developers.com/showthread.php?t=1899288.
The smoothness and speed hit me :)



Rep: (15)
jhar project butter (project butter) - triple buffering of graphics, i.e. smoothness at a high level. This project is almost the main feature of Android JB (4.1.1)



Rep: (-10)
Can you add a program in cm10 system itself to change the lock?



Rep: (18)
I am pleased with the battery keeps very well. from the firmware delighted.



Rep: (236)
hell0o
Jelly beanAlpha1 forGalaxy s Plusonto the people

Post has been edited3loyboy - 30.09.12, 22:16



Rep: (16)
Mini review on CM10 Alpha 1:
After daytime use, I appreciated all the pros and cons of this firmware, which I would like to tell you in more detail. Let's start.

1) Project Butter is the most basic feature of the new OS. Implemented completely acceptable, but there are some comments about this. The salt is that after unlocking the screen, the smartphone needs some time to accelerate) Therefore, right after unlocking you don’t feel all the charm. BUT!
When comparing devices with SM9 and CM10, the naked eye can see differences in the smoothness of transitions and animation in general.

2) Updated interface elements, such as: Notification panel, lock screen, some additional items in the settings section, automatic layout of widgets and shortcuts on the desktop when adding new widgets (or shortcuts again), updated Google search bar is all little things! But in general, they give new sensations and impressions of this OS. Separately, please note the notification bar because There are quite significant changes in it: the location of the clock icon, the settings, the date, and most importantly, the preview of notifications! It definitely deserves attention.

3) Also, I noticed that with the stock core, cm10 with heavy games copes more smartly than SM9. If I previously blocked the phone when I played The Amazing spider-man, and then unlocked it again, I had to wait 15-25 seconds for the game to go away from the hammering. Now, after unlocking, I wait no more than 10 seconds.

That's basically all the pros. Now about the minuses:
Not all functions work (well, it's easy to put up with this, alpha, after all, you just need to wait)

That's basically it. I advise you to put this firmware at least for the sake of a test in order to appreciate the charm of "Project butter" and new interface tweaks. But in terms of everyday use, it definitely will not work, at least because the camera does not work in it, and the camera is very necessary in some moments (and you never know when it will come).

P.S. Considering that for such a short period, Toomsday has done so much, I think that they will not be forced to wait for a long time with the camera) A month or so) We are waiting, hoping and believing.
P.S.S. I'm just like you categorically unhappy with the fact that some SG SGA + comes out on 4.1 and our device doesn't. But I'm certainly glad that CM10 will be)


Thanks for attention.

Post has been editedgaleip - 30.09.12, 22:19



Rep: (255)
galeip
Thanks for the feedback, I did not put it myself and it was interesting for me to read it.
Salt is that after unlocking the screen, the smartphone needs some time to accelerate) Therefore, right after unlocking you don’t feel all the charm

This is because of the kernel. You need to change the governor. I do not know what they are, but ondemand in this sense is braking (although the battery holds well). In my opinion the best governor is smartassv2, but he will not love him there (
If arco and ivendor develop cm10 (and they will, if there is a programmer able to make a 3.x kernel), then even a good firmware will turn out very good, and we can say that our phone is not lagging behind others)



Rep: (14)
I got myself this beauty, I was very pleased with the smoothness. Video on YouTube, I personally, sometimes take off, but tolerant. CM9 Battery



Rep: (16)
Alexander757 @ 10/01/2012, 00:54*
This is because of the kernel. You need to change the governor.


Not in this case. Nothing changes from the tutor, I wouldn’t just write about it if the tutor changed everything)
But about the kernel 3.xx, I agree. One has only to wait for his port, and that's it ... full-fledged CM9 and CM10 in the studio!



Rep: (21)
Boxy @ 09/30/2012, 18:04*
Video work CM10 -http://forum.xda-developers.com/showthread.php?t=1899288.
Smoothness and speed hit me


Yeah, this is just the first alpha, and almost everything works smoothly! I think that since CM9 is almost completed (or completely), then for CM10 they will finish it completely soon ... Here everything should happen faster than with CM9 ..: yes2:



Rep: (255)
Grigmag @ 10/01/2012, 5:02 PM*
Yeah, this is just the first alpha, and almost everything works smoothly! I think that since CM9 is almost completed (or completely), then for CM10 they will finish it completely soon ... Everything should happen faster than with CM9 ..

I have to disappoint you: doomsday94 will not do anything (or will not spread anything), and it is not known who will work on this project. I think that we will have to wait until they find a programmer who will make us a kernel (most likely not free) and only then everything will be (((((



Rep: (226)
Alexander757 @ 10/01/2012, 9:17 PM*
and who will be engaged in this project is unknown.

and here is the answer
arco68 Yesterday, 10:17 PM
I haven’t been around for a long time.


And at the expense of the kernel, yes, everything is bad ... but ICS was also not immediately done, we will wait (more 3 cores will appear on different platforms, so that it can be disassembled and ported in parts), there is nothing left to do.

While waiting, maybe Doomsday94he will allowlay out either source or fixes (YouTube, hardware video acceleration). Or Arko with Ivendor ... When - it is unimportant.

Post has been editedSunta - 02.10.12, 02:27



Rep: (21)
Alexander757 @ 10/01/2012, 10:17 PM*
Quote (Grigmag @ 10/01/2012, 5:02 PM)
Yeah, this is just the first alpha, and almost everything works smoothly! I think that since CM9 is almost completed (or completely), then for CM10 they will finish it completely soon ... Everything should happen faster than with CM9 ..
I have to disappoint you: doomsday94 will not do anything (or will not spread anything), and it is not known who will work on this project. I think that we will have to wait until they find a programmer who will make us a kernel (most likely not free) and only then everything will be (((((


Where domsday94 writes that there will be nothing to do ???

Posted on 10/02/2012, 15:43:

Alexander757 @ 10/01/2012, 10:17 PM*
until they find a programmer who will make us a kernel (most likely not free)


I think that not only we are people who own SGS + (From the sitesavagemessiahzine.com) want CM10! I think there are people who can sponsor this business: D

Posted on 10/02/2012, 15:45:

And not only Doomsday94 develops Zheleshki, for example,someonexD



Rep: (6)
Has anyone tried to put topics from CM9 on CM10? Work?



Rep: (6)
And yet - the cap says that the sound in the Bluetooth-headset and adjusting its volume works. But for some reason it does not work for me. The sound goes through the rear speaker.



Rep: (226)
Sliff_zoSSchitan @ 10/03/2012, 02:15*
Has anyone tried to put topics from CM9 on CM10? Work?

Put from the market Holo Red CM9 Theme - it works, maybe others from CM9 will do.

Sliff_zoSSchitan @ 10/03/2012, 02:21*
And yet - the cap says that the sound in the Bluetooth-headset and adjusting its volume works. But for some reason it does not work for me. The sound goes through the rear speaker.

on preview or on alpha 1? I checked it personally, on the Jabra BT2080, and, when poking the output device switch, it adequately switches between the internal and external speakers, and the headset.

Post has been editedSunta - 03.10.12, 11:13



Rep: (-1)
I fell off wi-fy what to do?



Rep: (21)
Brakovaniy @ 10/03/2012, 11:29*
Hello. Tell the kettle a stable firmware for Galaxy S + I9001, torment the battery on and off. I do not play games. I use it as a phone, Wi-Fi, 3G, sometimes I listen to the radio.

1. Wrong writing.
2.MOST stable firmware version is factory firmware, ANDROID 2.3.6.
3.Less stableCM9. But version ANDROID 4.0.4
Personally, I use CM9, and I advise you. Only there is one drawback. There is not a radio, you need to install the side ... For example:Spiritfm, just read the instructions before installing!
And if you do not like the battery-BUY a new one! : D

Post has been editedGrigmag - 03.10.12, 13:37



Rep: (21)
Brakovaniy @ 10/03/2012, 2:59 PM*
Grigmag, telka 2.3.6, a month to him, I don’t carry it because reading the topics I understand that hemorrhage is common. I myself do not really understand in the firmware, therefore I ask.

Do not be afraid! Just do everything according to the instructions!
Problems will be addressed, I will help everyone with problems! : 33

Post has been editedGrigmag - 03.10.12, 16:20


Full version    

Help     rules

Now: 07/01/19 13:26