[X]Assistant

[boar-hooligan]

ONDA V971 (DualCore / Quad Core) - Firmware
Onda V971_16Gb / 32Gb
Discussion пїЅ | Firmware пїЅ | Discussion Onda Vi40D (DualCore) пїЅ

Link to all Onda tablet firmware

Link to all Onda tablet firmware

How to determine which version of your firmware

Onda V971 (DualCore) - Official firmware (OS) (Post # 28279490)

Dual core

V971D v2.0- (01/16/2013) (Yandex Disk 358 MB)stitched throughUSB Burning tool 1.6.22
V971D-2.12- (06/17/2013) (Yandex Disk 372.4 MB)stitched throughUSB Burning tool 1.6.22
V971D-4.2.2.D (Jul 16, 2013) (Yandex Disk 279.7 MB)(for versions V1, V2, V5) is stitched throughUSB Burning tool 1.6.22
V971TD_4.2.2D (07/18/2013) (Yandex Disk 277.1 MB)(for versions V1, V2, V3A, V3B, V3D) is stitched throughUSB Burning tool 1.6.22
V971TD_4.2.2H (07/18/2013) (Yandex Disk 277.1 MB)(Only for V3C version) stitched throughUSB Burning tool 1.6.22

Quad core

V971s

V 971s Core 4 v3.2.1

V971sCore4_v3.2.1_v1 (07.26.2013) .rar (Yandex Disk 355.9 MB)
V971sCore4_v3.2.1_v2 (07.26.2013) .rar (Yandex Disk 355.9 MB)
V971sCore4_v3.2.1_v3 (07.26.2013) .rar (Yandex Disk 355.9 MB)

v 971 s Core 4 v3.2.5

v971sCore4_v3.2.5_v1-ota_ (08.30.2013) .zip (Yandex Disk 372.8 MB)

v 971 s Core 4 v3.3.1

V971 Core4 v3.3.1 v1 (11/21/2013) (Yandex Disk 366.4 MB)
V971 Core4 v3.3.1 v2 (11/21/2013) (Yandex Disk 366.4 MB)
V971 Core4 v3.3.1 v3 (11/21/2013) (Yandex Disk 366.4 MB)

V971s Core4 v4.4

V971s Core4 v4.4 v1 (01/06/2014) (Yandex Disk 416.1 MB)

V971

V971 Core4 v4.4

V971 Core4 v4.4 v1 (Yandex Disk 422 MB)
V971 Core4 v4.4 v2 (Yandex Disk 422 MB)
V971 Core4 v4.4 v3 (Yandex Disk 422 MB)

ClockworkMod recovery (for two kernel versions)

ClockworkMod recovery (for two kernel versions)- only for android up to 4.1.1

Firmware instructions

Tablet firmware from SD card (Video)

Tablet firmware from SD card (Video)

Installation Instructions Android 4.2.2

1.Connect the tablet with the clamped home, and press power - the computer will make the sound of connecting the device (you can release everything).
2.install drivers for the tablet: the firmware program and the firmware itself are in the zip archive that you download, the drivers are inside the flash driver.
Installing the driver: My computer with the right button - Properties - Equipment - Device Manager - Find the device you need (amlogic m6-chip (if you take down the nand, it will be m3-chip first)) - right-click on it - Update driver - Install manually, specify the folder with drivers.

3.Run the flasher. Next Config ->Import Upgrade File ->Specify file->with firmware Resource.V971D-422D-130716

4.Next, mark the checkbox Erase nand, click start! In the process, the device may get lost and the program will ask you to disconnect the device and rescan the ports, just pull the cable out of the tablet, click Stop, Config ->Reset port match info

5.We connect the cable back, turn off the erase nand checkbox, click Start.
Attention, we killed nand, now we have amlogic m3-chip installed, hanging on 4% it will disconnect and amlogic m6-chip will connect (you will hear a computer beep)
Installation will continue to 100%

6.After a successful flashing, we are greeted by the ONDA logo on the screen.

Thanks for the instruction

wari1998 download

Firmware v1.0-v1.5

1.Download the firmware file to the PC from the header or from the Onda website;
2.Prepare a TF microSD card in FAT or FAT32 format, with a capacity of at least 512 MB, and preferably 2-8Gb;
3.Make sure the tablet battery is more than 80% charged;

The order of the firmware:
Before performing the following items, temporarily, disable Anti-Virus.

1.Unzip the firmware package so that the corresponding folder appears.



2. Insert the TF card into the card reader device (or another TF card supporting device), and connect it to the PC. Then open the folder with the previously extracted files, and copy all the files (you can not copy the readme) to the root directory of the TF card.



After the files are copied from the computer to the TF card, safely disconnect the card reader;

3.Turn off the tablet properly, and then correctly insert the TF card into the appropriate slot on the tablet;
4.Press and hold the "Home" key and do not release, then press the power button to start the download. Release the power button after turning on the tablet (white android on the display) and do not release the "Home” button. When the green android image appears on the screen, The “Home” button can be released.



The update is done automatically. The row at the bottom of the screen will start filling from left to right.

5.The tablet, after completing the update, will automatically reboot. If the tablet does not restart automatically, start it in the usual way.


Note:
1.Before updating, please make sure the tablet is fully charged.
2.Save important personal data before the update, as the update process has its own disk format, and the original data will be lost and cannot be restored;
3.During the update process, do not click on the tablet buttons to avoid errors when updating.
4.Please read this list of instructions carefully before updating.

Ps. The file "factory_update_param.aml" specifies the order in which the instructions are executed during the firmware process.
--update_package = / sdcard / g12refM1006A1SPI.zip (the file name changes, and depends on the firmware)
--update_patch = / sdcard / update.zip (on latest firmware ... = / sdcard / patch.zip)
--wipe_data
--wipe_cache
--wipe_media
Edited by text editor. Leaving only the top line, you update only the system, without affecting the installed programs.

Quad Core Firmware - Phoenix Suit 1.0.7 IMG way

firmware_phoenix_suit_1.0.7.doc(1.82 MB)

Do after firmware

1. Download on PC, withsavagemessiahzine.com, attachmentES File Explorer
2. Download firmware, following the links from the header.
3. Unpack the firmware files to the TF card (to the root) + upload the previously downloadedES File Explorer(better to folder, for example Distr)
4. Charge off tablet (control charging by pressing the power button. As soon as the strips stop moving, the tablet is charged)
5. Insert the TF card into the tablet. Pressing and holding the "Home" button on the end, press the power button. When a white android appears, you can release the power button and hold the "Home" button. Next, a green anroid appears, and under it is the download bar. The "Home" button can be released. The firmware runs automatically, after which the tablet will reboot.
6. After booting, you can set up through the settings: language, keyboard layouts, set the time, month, year and time zone with your hands (change to yours later), USB debugging.
7. To installES File Explorer, reboot, and install in the settings of the Root-rights program (Root-explorer, Root folder, Connect system folder)
8. Register your account in the tablet settings. Launch the Market. Download the application. (Control of the absence of 101 errors)
9. In the "ES Explorer" open - "system>app "and remove unnecessary Chinese programs. You can leave" Onda Store (AnZhi) ".

Detailed F.A.Q. to restore the tablet during the so-called "internal memory failure".Tyk

Parsing tablet

1. Remove the rubber plugs and unscrew the screws.
2. Buy some hard guitar mediators (Chinese blue adapt, for disassembly, I do not advise to use. Thick)
3. Next, gently insert the mediator between the display and the case, as in the photo, by 0.5 cm. Angle 10-15 degrees. And then carefully push the mediator, slightly changing the angle in places with latches (you will feel that you have rested against something).

The attachment points of the latches are marked in the following photo.

Start better from the center of the long sides. At the corners do not zealous.
As a supplement I advise you to use several mediators.
(after unfastening one latch, leave the pick at that place and insert the next pick next to it and gently move it along the screen, until the next catch, etc.)
Attention!!! Gently lift the display and unfasten 2 cables from the board.

Root rights

root.zip(5.28 MB)
We put through Recovery
ROOT_Core4.zip(1.41 MB)
We put through Recovery
Root Onda 4.4.2 (for 4 nuclear tablets + removal of Chinese software)
Root rights + ClockworkMod recovery (CWM) Only for 4-core devices

Drivers and Utilities

USB-burning-tool

USB Burning tool 1.6.9 RUS
USB Burning tool 1.6.22 RUS

Oda suite

Onda Suite 2.0.exe(14.37 MB)

Onda_Suite_2.1_RUS.exe(13.71 MB)

Phoenix Suit 1.0.7 Russian Version

Do not forget - you do all manipulations with the tablet at your own peril and risk! Upon receipt of the "brick", please do not blame anyone!

K

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through the "Complaint" button under the messages to which you want to add links.

Post has been editedvaalf - 06.11.17, 16:28

[SergKSV]

Sochi777
I also thought that nothing would happen in a similar situation. But then the white robot still changed to the menu recovery. We must try further.

[meteor_ya]

In general, the white android icon does not disappear.
According to the instructions, release the Power button after the appearance of the white android, Home after the green. Not green ... how long to wait?
Somewhere I read that it is necessary to release both buttons, to no purpose.
In technical support they said to keep 5 minutes, it is supposed to be sewn along the quiet one.
About the number of attempts is understandable. Please explain how long the sequence can be wrong.

[nervnvs]

came the second tablet. I sewed on 1.5, without problems. Internal memory via cable formatted in FAT32 + cluster size 64.
Tests:
Antutu - 9842 (!)
Quadrant - 5130 (above htc one x)
To be honest .. to go nuts. On the drain, it gave out about 7,000 antutu, and did not catch up with my cube u30gt. But now, 1500 points ahead.

[rassv3t]

meteor_ya @ 10/08/2012, 5:15 PM

In general, the white android icon does not disappear.

Try removing the microSD card from the tablet off, then just hold down both buttons. Don't let anything go.

[alivestone]

[email protected], 07:59

Tests:
Antutu - 9842 (!)
Quadrant - 5130 (above htc one x)

impressive of course! :)

[gloriamas]

rassv3t
In general, the white android icon does not disappear.

In the Vi40D branch, in the firmware section, p15-16. Also in the V711 branch.

[horse315]

1. Is it possible to upgrade from usb media (sd card does not work for me)?
I understand that Recovery and would be happy, because looks for the xml file in / udisk, but does not find anything in me. Maybe it is not mounted there? When you connect a flash drive LED flashes, but no more. Can someone try to thread?

2. Recovery mounts partitions differently than the system?
Maybe I would be able to update from the internal memory. It seems to me that for Recovery media mounts not Vold.

[Eureka!]

horse315 @ 10/16/2012, 10:59 PM

1. Is it possible to upgrade from usb media (sd card does not work for me)?
I understand that Recovery and would be happy, because looks for the xml file in / udisk, but does not find anything in me. Maybe it is not mounted there? When you connect a flash drive LED flashes, but no more. Can someone try to thread?

2. Recovery mounts partitions differently than the system?
Maybe I would be able to update from the internal memory. It seems to me that for Recovery media mounts not Vold.

1. It will not work, transfer to the internal, it turned out only with mircoSD.
2. Calls at the mount otherwise, which is why it does not find it.

[gloriamas]

I'm trying to flash on v1.5.5 on V712(Warning! The firmware script is different, via cable)
It stops at 73% and gives an error connecting to the port.
Here is the log of the last steps.
[T 3] [10:31:11]: load uimage ...
[T 3] [10:31:11]: Transfer Complete! total size is 3875460 bytes
[T 3] [10:31:17]: command exec: bootm 0x82000000
[T 3] [10:31:19]: boot uImage ...
[T 3] [10:31:52]: cannot find disk! 30times
[T 3] [10:31:53]: failed device connected, current step is 17
... Type can not find a disk in the allotted time, although it appears "Onda Mid". And its size is 13615Mb.
According to the instructions turned off "Power Management" on the USB ports of the Root Hub (in XP "Root USB Hub")
Drivers are installed in the Device Manager:
1. WoldCup Device
2. Linux File-Stor Gadget USB Device (Onda MID)
3. USB storage device
And here is the configuration file:
<command sn = "0" path = "usb_spl.bin" address = "0xd9000000" run = "true">load spl</ command>
<command sn = "1" path = "u-boot-orig.bin" address = "0x8f800000" run = "false">load uboot</ command>
<command sn = "2">crc 0x8f800000 size value</ command>
<command sn = "3">run 0x8f800000</ command>
<command sn = "4">set_chgcur 0</ command>
<command sn = "5">video dev bl_off</ command>
<command sn = "6">video dev disable</ command>
<command sn = "7">sf probe 2</ command>
<command sn = "8">sf erase 0 100000</ command>
<command sn = "9">nand erase 4000000</ command>
<command sn = "10">defenv</ command>
<command sn = "11">setenv bootargs $ {bootargs} a9_clk_max = 600000000</ command>
<command sn = "12" cmd = "setenv recovery_command --usb_burning" address = "0x82000000">load addr</ command>
<command sn = "13">cmd_in_mem 0x82000000</ command>
<command sn = "14">save</ command>
<command sn = "15" path = "uImage_recovery" address = "0x82000000" run = "false">load uimage</ command>
<command sn = "16">bootm 0x82000000</ command>
<command sn = "17">wipe_data</ command>
<command sn = "18">wipe_cache</ command>
<command sn = "19" count = "150">update: update.zip</ command>
<command sn = "20" count = "150">update: patch.zip</ command>
<command sn = "21">wipe_cache</ command>
<command sn = "22">shutdown</ command>
</ progress_configs>
Step 17 - wipe_data. Here he stops at it.

Post has been editedgloriamas - 25.10.12, 11:38

[alivestone]

I understand that in this firmware through the cable is the process? Another algorithm. Maybe there is a problem with the cable?

Try to take another cable, connect only to the rear USB ports of the PC

[gloriamas]

I tried everything.

[Eureka!]

Gloriamas @ 10/25/2012, 12:36

I tried everything.

result?

[alivestone]

Here the Chinasians drive themselves. Device testers are ordinary consumers. And the tester staff is not needed for free and the salary is not paid. :)

They cannot recheck the process of firmware on various systems before they are shared, and then we break our heads, we get bricks.

Post has been editedalivestone - 25.10.12, 12:56

[x-err]

The speed is good, but what about the battery life? I plan to buy one of these days or it or GT30 / Pimo M1 I sit turnip scales .....

[HydrogenXS]

Here is the solution to the problem with 73%, on the example of onda VI40D.
The difference is that you need to use the file on Resource.Vi40D_v1.5.5.zip, and the one you have in the main archive.
Onda Vi40D (DualCore) - Official firmware (OS) (Post # 16515140)

[alivestone]

HydrogenXS @ 10/25/2012, 2:07 PM

Here is the solution to the problem with 73%, on the example of onda VI40D.
The difference is that you need to use the file on Resource.Vi40D_v1.5.5.zip, and the one you have in the main archive.
Onda Vi40D (DualCore) - Official firmware (OS) (Post # 16515140)

Wow. Well done. :) And why is this happening, why does he stop at 73%?

In general, is it worth it to flash on this firmware? what is there in it? Namut there are some results of using positive or while everyone is testing :)

Post has been editedalivestone - 25.10.12, 15:17

[HydrogenXS]

Yes worth it. Onda almost swears that all bugs are captured.
She is a litter for Jelly Bean.
All problems are caused by changing the main loader.

An error of 73% manifests itself in many circumstances.
Such as:
1. The presence of an unstable connection with USB, namely with a native cable, it is bundled, to put it mildly, bad)
2. USB drives connected to one USB hub such as Flash drives, keyboard-mice
3. The main problem is the localization of Windows. Due to the fact that the flasher is written by the Chinese, it is in Chinese, and as such it should work on the Windows version with
Chinese localization, English. It was added there as a standard, it turns out that English Windows will also flash it normally. But in connection with the problem of transliteration of Russian characters, the program behaves inadequately.

[alivestone]

I want to ask you to check in the new 1.5.5 how does YouTube behave in the Chrome browser, does it show the video in the window or only opens it to full screen with the system player? (User Agent: Android)

[gloriamas]

Anyone who can not wait to flash on v1.5.5 can do it from under the English Windows (WinXP_x86en or Win7_x86en). Checked !!! Also, to localize the system language, you can try the programVistalizator.
Install (on another HDD or a new partition) WinXP_SP3_x86en. You can try and LiveCD (USB).
After several attempts to flash on v1.5.5 I had a brick on my hands.
1. When connecting the tablet to the PC, I requested the M6 ​​driver (WoldCupDevice). Specify the folder "AmlogicUsbBurningDriver"
2. Chose the firmware and clicked "START"
3. In the course of the firmware, around 73% requested the M3 driver (Linux File-Stor Gadget USB Device (Onda MID)). Here he needs to quickly slip the driver from the "AmlogicUsbBurningDriver" folder
Then he still automatically installs 1 driver (USB storage device) and asks to reboot the system. Do not touch anything. We are waiting for the end of the firmware. Disconnect the cable. My tablet did not want to run due to a low battery. I connected it to the USB port of the PC and launched the tablet, as usual. The system asked for the driver "Android SDK". Installed. Everything.
Instructions on firmware v1.5.5

Post has been editedgloriamas - 27.10.12, 04:21

[alivestone]

Windu lazy to personally lick me, until I wait for some clarifications ... :)

Friend I have a very important question for me, how to add my Google contacts to the device? I understand that they were thrown out. cut down. But it’s very inconvenient to write a letter - Gmail does not show contacts - how to use it ????

Post has been editedalivestone - 26.10.12, 10:19