HAME MPR-A1 - Discussion | Discussion of the mobile router Hame MPR-A1



Rep: (58)
DiscussionHAME MPR-A1, A5, A15, Micromax MMX 440W and other clones on the RT5350 chip
Firmware and repair


Important information!
  1. Want to get timely help or advice on your device?
    Please, along with the question, lay out additional information:
    1. Device photo (or photo link)
    2. Characteristics (memory, processor, etc.)
    3. Photo or description of VEB interface
    4. What bootloader (u-boot)
    5. What is the firmware now, with an indication of the exact version or links to the firmware!
    6. What firmware was the native
    7. IP address on the router, computer, on another home router (if any).
    8. Link from where you downloaded the firmware and bootloader
    If the questions are related to connecting modems:
    9. In which modem mode (Stick, Highlink, "Modem only")
    10. What is the firmware on the modem - version or link to the firmware
    Or at least some of this information, which will help to know your router.
    All this information is needed to quickly understand your problem!
    Appreciate your time and other users!

  2. Attention! Recently, deliveries of routers of poor quality production have become more frequent.
    Such routers are very hot.
    Some cease to turn on after unexplained reasons.
    Two lights are on or off.
    LEDs are dim.
    The router does not assign an IP address.
    Not visible on wifi.
    There is no possibility to use the emergency loader (if such has been installed).
    If you get such a router - immediately open a dispute with the supplier!
    And simultaneously think over the cooling system. If the router does not turn on, first of all, try to reach the bootloader (if you have changed it). And if this does not help, it is necessary to “solder” the processor with a hair dryer (apply flux and slightly heat the processor surface). Most often it helps and the router comes to life!


Specifications
Appearance
Hame A1
Attached Image

HAME MPR-A1 designed to transfer Wi-Fi internet connection to tablets, phones and other devices, and can also be used as an external charge (1800mAh)

WiFi:
- Frequency range: 2412-2483MHz
- WiFi IEEE 802.11 b / g / n specification
- Data transfer rate:
802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n: 150Mbps
- Wi-Fi router supports up to 20 users

External connectors:
- Micro USB (for battery charging)
- Full size USB: connect 3G usb modems (supports all popular 3G modems)
- RJ45 connector: 1 WAN (supports DHCP, ADSL, Static IP) or LAN (automatic recognition of ADSL / DHCP and WAN / LAN without pre-installed profiles)

Battery
- Capacity 1800mAh
- Working time: from 4 to 8 hours of the router

Additional functions:
- Ability to use the router HAME MPR-A1 as an additional external battery - power bank (charges via USB).

- Dimensions: 95x 35x 14 mm
- Weight: 124gr.

Additional Information
Off site:Hametech.com
User Guide (in English) -Attached fileWR-M3GU12.pdf(1.06 MB)
Description and settings of the router HAME MPR-A1 (see2 postTopics)

List of supported modems
  • Aircard 932 HSP
  • AAircard 951 HSPA
  • Aircard 2417C-U302 HSPA
  • Aircard V721 HSPA
  • Alcatel OneTouchX060S HSPA
  • Alcatel OneTouchX200 HSPA
  • Anydata adu-520c EV-DO
  • Anydata ADU-520L EV-DO
  • Anydata ADU-555C EV-DO
  • ASB W720 HSPA
  • at & t AC885 HSPA
  • at & t sierrawireless HSPA
  • Axesstel MV-140A HSPA
  • Axesstel MV-140B EV-DO
  • b.mobile locked HSPA
  • Bandluxe c120 HSPA
  • Bandluxe c170 HSPA
  • Bandluxe c180 HSPA
  • Bandluxe c270 HSPA
  • Bandluxe c321 HSPA
  • Bandluxe C100S HSDPA
  • Cricket UM185C EV-DO
  • D-Link DWM156 HSPA
  • D-Link DWM-162-U5 EV-DO
  • D-Link DWM-162-U5 (part) EV-DO
  • D-Link DWM-652 HSPA
  • Epivalley SEC-8089 EV-DO
  • Frankin CDU-680 EV-DO
  • GI0322 HWV42 HSPA
  • HOJYWIRELESS STERICSSON TD-SCDMA
  • Haier CE-100 EV-DO
  • Huawei 2910 HSPA
  • Huawei E122 HSPA
  • Huawei E153 HSPA
  • Huawei E1552 HSDPA
  • Huawei E156G HSDPA
  • Huawei E160 HSPA
  • Huawei E160G HSPA
  • Huawei E1612 HSPA
  • Huawei E1630 HSDPA
  • Huawei E166 HSPA
  • Huawei E169 HSPA
  • Huawei E170 HSPA
  • Huawei E172 HSPA
  • Huawei E173 HSPA
  • Huawei E1750 HSPA
  • Huawei E1752 HSPA
  • Huawei E176 HSPA
  • Huawei E1762 HSPA
  • Huawei E176G HSPA
  • Huawei E1780 HSPA
  • Huawei E1780 HSPA
  • Huawei E1782 HSPA
  • Huawei E180 HSPA
  • Huawei E182E HSPA +
  • Huawei E220 HSDPA
  • Huawei E226 HSDPA
  • Huawei E261 HSPA
  • Huawei E270 HSDPA
  • Huawei E353 HSPA +
  • Huawei E510 HSPA
  • Huawei E73 HSPA
  • Huawei EC122 EV-DO
  • Huawei EC1260 EV-DO
  • Huawei EC1261 EV-DO
  • Huawei EC1270 EV-DO
  • Huawei EC156 EV-DO
  • Huawei EC167 EV-DO
  • Huawei EC169 EV-DO
  • Huawei EC189 EV-DO
  • Huawei EC226 EV-DO
  • Huawei EC306 EV-DO
  • Huawei EG162G EDGE
  • Huawei ET127 TD-SCDMA
  • Huawei ET128 TD-SCDMA
  • Huawei ET128-2 TD-SCDMA
  • Huawei MD_ @ HSPA
  • Huawei UMG1691 HSDPA
  • Huawei UMG181 HSDPA
  • Huawei E3372
  • Huawei E3276
  • Megaphone M150-2
  • MTS 827F / 829F
  • HXI EV-DO
  • IFOX 800 HSPA
  • IFOX 820 HSPA
  • Jadpad TJP-W100 HSPA
  • Lenovo CE210 EV-DO
  • Lenovo W100 EV-DO
  • Linktop lw273 HSDPA
  • Longcheer WM71 HSPA
  • Micromax MMX300G HSPA
  • NEXT USB301 HSDPA
  • Nokia cs-15 HSPA
  • Novatel MC930D HSPA
  • Novatel MC950D ​​HSPA
  • OGERS MD400 HSPA
  • Option 225 HSPA
  • Option GI0335 HSPA
  • Option GI0431 HSPA
  • Option GI0461 HSPA
  • Option icon210 HSPA
  • Option U12 HSPA
  • orange GI0225 HSPA
  • Pantech PX-500 EV-DO
  • PROLINK PSH101 HSPA
  • Samsung SGH-H128 TD-SCDMA
  • samsung hspa
  • sanmu HSPA
  • sentarmodem ILD72A HSDPA
  • SMARTBRO HSPA
  • SonyEricss MD300 HSPA
  • sprintMobileBroadband U720 EV-DO
  • telenor HSPA
  • Tj 1602 EV-DO
  • Tj 1603 EV-DO
  • TXT EV-88 EV-DO
  • TXT W-11 HSPA
  • TXT W-11 HSDPA
  • TXT W-12 HSDPA
  • Verizon UMW190 CDMA
  • vodafone CE1588 HSDPA
  • vodafone E272 HSPA
  • vodafone K3520 HSDPA
  • vodafone K3565 HSDPA
  • vodafone K3565 (Rev2) HSDPA
  • vodafone K3565-Z HSPA
  • vodafone K3570-Z HSDPA
  • vodafone K3571-Z HSDPA
  • vodafone K3715 HSPA
  • vodafone K3760 HSPA
  • vodafone K3760 HSPA
  • vodafone K3765 HSPA
  • vodafone K3765-Z HSPA
  • Weiwen black EV-DO
  • Weiwen black EV-DO
  • ZTE A371 TD-SCDMA
  • ZTE AC2726 EV-DO
  • ZTE AC2736 EV-DO
  • ZTE AC2746 EV-DO
  • ZTE AC2766 EV-DO
  • ZTE AC305 EV-DO
  • ZTE AC560 EV-DO
  • ZTE AC560 (enhance) EV-DO
  • ZTE AC580 EV-DO
  • ZTE AC581 EV-DO
  • ZTE AC582 EV-DO
  • ZTE AC590 EV-DO
  • ZTE AC682 EV-DO
  • ZTE AC8710 EV-DO
  • ZTE M801 HSPA
  • ZTE MF100 HSPA
  • ZTE MF100 (Russia) HSPA
  • ZTE MF110 HSPA
  • ZTE MF112 HSUPA
  • ZTE MF180 HSDPA
  • ZTE MF190 HSDPA
  • ZTE MF190B HSUPA
  • ZTE MF190J HSUPA
  • ZTE MF192 HSDPA
  • ZTE MF193 HSDPA
  • ZTE MF622 HSPA
  • ZTE MF626 HSDPA
  • ZTE MF627 HSDPA
  • ZTE MF628 HSPA
  • ZTE MF631 HSDPA
  • ZTE MF633 HSDPA
  • ZTE MF633BP + HSDPA
  • ZTE MF633R HSDPA
  • ZTE MF636 HSDPA
  • ZTE MF637U HSPA
  • ZTE MF668 HSPA
  • ZTE MF669 HSPA +
  • ZTE MF680 HSPA
  • ZTE MU350 TD-SCDMA
  • ZTE MU351 TD-SCDMA
  • ZTE-T A356 TD-SCDMA




Firmware
Useful
  • Backup firmware
    1. I used this instruction to remove the dump.
    2. mount -t ramfs -o size = 8M ramfs / etc_ro / web
    3. and then copy the firmware:
    4. cat / dev / mtdblock0>/etc_ro/web/fw.bin
    5. Then pick up:http: // router_dir/fw.bin




Topics CuratorPukinDukin. For questions about filling caps contact throughQMS.
How to do it right, what would you understand the first time, well describedhere.


Post has been editedPukinDukin - 08.07.20, 12:01
Reason for editing: cap redone by DetrouX



Rep: (466)
zero1212 @ 13.02.2020, 21:42*
butloder (Breed)

I now do not remember, but in the source loader defaynitsya size of RAM. If you have time and find their sources see what there is. Maybe there is something, and is defined and initialized

Post has been editedWErt (WErt) - 13.02.20, 23:34



Rep: (41)
* WErt (WErt) , I would be very grateful!



Rep: (0)
* stas_sx , You can PM me or write instructions here



Rep: (3)
Hello to all. how to restore the router, when the lamp is lit blue, and the network card shows an unidentified network. It was a piercing Zyxel keenetic, after a transient on the Open WRT, rebooted and hung. Pereprobyval all recovery options



Rep: (171)
* Lightdead,
a boot loader?

Turn to the clamped reset. Unless Breed, that then connects via telnet and shayte of instructions via tftp



Rep: (3)
* Vladr,
Breed is not, he does not go to 192.168.1.1, and the like via telnet poklyuchitsya and sew through the TFTP, the floor does not work offline clambered nothing. and now that setevuhi

Attached images
Attached Image


Post has been editedLightdead - 19.02.20, 20:24



Rep: (44)
* Lightdead , Connect the console and via tftp update the bootloader and then pour through a new firmware loader.



Rep: (3)
* stas_sx,
and where this kansoli take?



Rep: (171)
* Lightdead,
Turn the power pi clamped reset, the router must run the loader.
on as napianoin this post



Rep: (3)
* Vladr,
and address in a telnet some point, 192.168.100.1 probyval, nothing happened



Rep: (44)
* Lightdead If that method does not work, which says Vladr , You will need to disassemble the router, and the board has a point to connect. Will need another usb-ttl adapter.



Rep: (171)
* Lightdead,

Another option. If you do not have a programmer, find a buddy-radiogubitelya with SPI-flash programmer and ask them to fill in the image of Breed loader. There's something about 75KB 0 address.
And it will be Happiness. At the same time the stick can be modified by replacement of 4 to 8 or even 16MB



Rep: (3)
* Vladr, and in any way without the programmer?

Posted on 19/02/2020, 21:16:

* stas_sx, blinsky, yusb TTL next month will come

Posted on 19/02/2020, 21:18:

Tried to flash kitayprogoy, network card became reconnect and implement zero



Rep: (6)
Who knows firmware Padawan from solalex1Repeater mode works?



Rep: (0)
* PukinDukin , Hello. Need help connecting hauwei e173 modem is unlocked. Hardware version: CD1E153M. Fimware Version 11.126.85.00.209. Connect need to karmannomo routoru Chip RT5350 and 32 MB memory. Firmware on routore pomenina on the sly domavonok. When you connect the modem behaves as he wants. Then connect and then just do not riagiruet .Podskazhite where routore korektno you can customize. YOTA operator. On your computer works with programs you installed with the modem without problems.

Post has been editedMihha77 - 22.02.20, 22:08



Rep: (0)
Privet.Kogda sit in the internet via the PC in a few minutes comes to limiting, and when on the phone with wifi'm not zahodit.V What's the matter?

Attached images
Attached Image


Post has been editedpsix116rus - 01.03.20, 17:15



Rep: (1495)
psix116rus @ 01.03.20, 19:04*
When I sit in the internet via the PC in a few minutes it comes to limiting
I think, not quite in the topic Router, yota blocks the distribution of the Internet by using the telephone tariffs, "firing" TTL value (with a PC, it is different from the telephone), there is a special theme on these issuesBypassing the distribution limits of the YOTA mobile InternetOr fix the TTL on a router, the firmware Sly Brownie is there:
(! Laid function TTL fixation on a router is necessary to adjust to your needs, in the WEB interface of the router menu - System - Load - at the bottom of the screen - Local loading Depending on the IMEI modem -. To set the value.)
or on the PC, look for the topics in more detail.



Rep: (0)
Hello to all. There is a Chinese clone hame with reverse loader, put him firmware zyxel keenetic 4g. Since it began modem significantly heated and consumes a mere 0.19-0.27A. I would like to use together with 3g router, but the modem 5-7 minutes goes into cyclic reboot, every 5-7 minutes. Without 3g not reboot. Consumption with 0.4-0.6A modem. What is the reason where to dig, do not pull on the current?

Post has been editedmfisto93 - 05.03.20, 12:17



Rep: (442)
mfisto93 @ 05.03.20, 11:07*
do not pull on the current?

Yes.



Rep: (0)
Whether it is possible router soldering components to stretch out, or alternatively powered 1 and 4 contact 3g modem from an external source, and 2 and 3 directly to the router?


Full version    

Help     rules

Time is now: 15/09/20, 22:44