[X]Assistant

[c.bmw]

Toshiba AC100 - Alternative OS. Installation, configuration, software

Customization

If you use Ubuntu, the most convenient will be installing updates from the official repository.
There is an official version from nvidia, but at the moment I don’t know about its ability to work. Based on it, there is the phh distribution, but today it has almost no advantages.
Dualboot at Toshiba 100-117
CPU frequency control
All current manuals on WIKI
Ubuntu put so

Core changes

3.1.10:nvidia

• Works USB-Network (modprobe g_cdc)
  
• Suspend -?

3.2.x

• works, with blobs there is support for gles and omx
  
• no uboot bye

>=3.8

• fbdev, initial 3d support somewhere on the mainline path
  
• uboot

Image archive for Toshiba AC100

Image archive for Toshiba AC100

Post has been editedstp101 - 23.08.18, 15:02

Reason for editing: Image archive for Toshiba AC100

[Skain]

Worth Ubuntu 12.04 daily builds, how do I measure CPU temperature?
Lm-sensors are installed, but do not detect temperature sensors, actually when entering the sensors command, it writes that it is impossible to determine temperatures, so there are no sensors (supposedly).
On ubuntu 11.04, even though this program did not detect any sensors, it somehow produced the core temperature via the sensors command.
How can I be, immediately say, other similar programs (for example acpi) are either not installed or anything else?

[imadog]

I was looking for a fresh rutfs MeeGo for that link. And somehow there is deaf. I think to run from the map ...

[c.bmw]

Skain @ 08/08/2012, 17:38

Worth Ubuntu 12.04 daily builds, how do I measure CPU temperature?

modprobe lm90
sensors

[Skain]

c.bmw @ 08/09/2012, 01:22

modprobe lm90

It goes well.

c.bmw @ 08/09/2012, 01:22

sensors

Not sensors found!
Make sure you loaded ... and so on.

[c.bmw]

Skain @ 08/09/2012, 13:31

Not sensors found!

sensors-detect

Kernel default?

Post has been editedc.bmw - 09.08.12, 12:32

[Skain]

[email protected], 13:32

sensors-detect

The same as before - does not determine anything, and Sensors - not sensors found ...
--------------------------------------------------------------------------------------
Well, figs with her, with this temperature, there is another question - if you make yourself cool. stand - where to direct the flow of air - in the gap of the speakers or just to the bottom surface (approximately where the processor is located), which option will be more effective?

[email protected], 13:32

Kernel default?

Yes.

Post has been editedSkain - 09.08.12, 12:38

[Konkord96]

Skain @ 08/09/2012, 09:35

Well, figs with her, with this temperature, there is another question - if you make yourself cool. stand - where to direct the flow of air - in the gap of the speakers or just to the bottom surface (approximately where the processor is located), which option will be more effective?

under the processor, and better understand it, pull out the nurse and drill holes for air. and change thermal paste

[wapmorgan]

c.bmw

# sensors

adt7461-i2c-4-4c
Adapter: Tegra I2C adapter
temp1: -23.0 В° C (low = -64.0 В° C, high = + 21.0 В° C)
(crit = + 21.0 В° C, hyst = + 11.0 В° C)
temp2: -13.2 В° C (low = -64.0 В° C, high = + 21.0 В° C)
(crit = + 21.0 В° C, hyst = + 11.0 В°

# sensors-detect

/ sys / bus / pci / devices: No such file or directory at / usr / sbin / sensors-detect line 2900.

$ lsmod | grep lm

lm90 11460 0
hwmon 1351 1 lm90

The temperature is very wrong. 3.0.27-1-ac100, ubuntu 12.04.

Post has been editedwapmorgan - 09.08.12, 14:44

[Skain]

Konkord96 @ 08/09/2012, 15:29

under the processor, and better understand it, pull out the nurse and drill holes for air. and change thermal paste

Made, under the processor, copes with a bang, but did not drill holes, and then I will sort it out, but it is unlikely to come back. I took a cooler from the processor (12 v) from under the old system unit, I brought the contacts to the usb connector, as a result, the stand works from the usb port with Toshiba, there is no noise). Who needs it, I can explain how to make a cooler working from usb (wiring).

[Acuk]

archlinux ... from wiki
no program starts on sudo - display not found, could not connect to x-server, etc.
what are you doing? =)

Post has been editedAcuk - 09.08.12, 17:50

[Skain]

Acuk @ 08/09/2012, 18:44

archlinux ... from wiki

Well, I didn’t even start there, but in another shell (I don’t remember which one), neither wi-fi, nor usb-flash drives were stuck ...
---
And in vkontakte video on html5 someone play? And then I have constantly at the stage of loading ...

Post has been editedSkain - 09.08.12, 18:06

[Konkord96]

Skain @ 08/09/2012, 1:27 PM

Made, under the processor, copes with a bang, but did not drill holes, and then I will sort it out, but it is unlikely to come back. I took a cooler from the processor (12 v) from under the old system unit, I brought the contacts to the usb connector, as a result, the stand works from the usb port with Toshiba, there is no noise). Who needs it, I can explain how to make a cooler working from usb (wiring).

But does mini usb work? try to connect

Skain @ 08/09/2012, 15:03

And in vkontakte video on html5 someone play? And then I have constantly at the stage of loading ...

works for me. And quite well.

Post has been editedKonkord96 - 09.08.12, 19:55

[Skain]

Konkord96 @ 08/09/2012, 8:53 PM

But does mini usb work? try to connect

It seems to me there is no difference from what to work - to work and from the mini usb I will be sure.

[Konkord96]

Skain @ 08/09/2012, 17:49

It seems to me there is no difference from what to work - to work and from the mini usb I will be sure.

Well, so that the connector does not occupy a better place in the mini-stick?

[c.bmw]

Wapmorgan @ 08/09/2012, 15:43

The temperature is very wrong. 3.0.27-1-ac100, ubuntu 12.04.

Mark made some commits about this, it is strange that they did not enter the off-core. : |

[Skain]

Konkord96 @ 08/09/2012, 23:12

Well, so that the connector does not occupy a better place in the mini-stick?

Yes, I don’t need it, flash drives can stick the stand off and I need a mouse, I’m used to the touchpad already.

[Lnrmn]

Skain @ 08/09/2012, 9:49 PM

It seems to me there is no difference from what to work - to work and from the mini usb I will be sure.

But I'm not sure. There is no need to power the mini-USB slave device. But you have to try.

Skain @ 08/10/2012, 08:23

Yes, I don’t need it, flash drives can stick the stand off and I need a mouse, I’m used to the touchpad already.

Mount a small USB hub into the stand;)

[Acuk]

Hey.
I concluded that the archik from the wiki is very raw and returned to 11.10
Therefore, the idea was to use xbmc as a shell.
There is a plugin that allows you to run linuhov programs / scripts, it works smartly, the blinking is defeated - so it’s all for yourself ...
Does anyone have a thread of experience?

[Skain]

LnrMn @ 08/10/2012, 08:25

Mount a small USB hub into the stand;)

The idea is not bad, but what about it?)

[Konkord96]

Skain @ 08/10/2012, 09:42

The idea is not bad, but what about it?)

You decide%)