Tell me, please, how to remove incorrect steady-CF?
Up to half of the process has reached, and then fell out with an error. Re the same.
After rebooting copied libraries are loaded, but tumbled errors and stopped to start the native software.
Remove them does not, says busy. At a similar device these libraries do not.
[DeviceLibMeta]
"Dll" = "ee_m24c32.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"GpioDriver" = "EIO1:"
"ChipEnableE0" = word: 60; 96 - ECUV5_IOMUX_PIN_GPIO3_0
"ChipEnableDataE0" = dword: 0
"ChipEnableE1" = word: FFFF; Disabled
"ChipEnableDataE1" = dword: 0
"ChipEnableE2" = word: FFFF; Disabled
"ChipEnableDataE2" = dword: 0
"WriteProtectPad" = word: 50; 80 - ECUV5_IOMUX_PIN_GPIO2_0
"WriteProtectData" = dword: 1; Write Protect Initially active
"I2CDriver" = "I2C1:"
"I2CMutexWaitTimeout" = dword: 200
[DeviceLibMeta]
"Dll" = "mx25l8005.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"SpiBusDriver" = "SPI1:"
"SpiChipSelect" = byte: 1
"SpiExchangeFinishEvent" = "FLASH_MX25L8005_SPI_FINISH_EV0"
"GpioDriver" = "EIO1:"
"SlaveSelectGpio" = dword: 5E5; SlaveSelect Pad in GPIO-Mode (CSPI1_SS1 PAD (GPIO1.19), Entry Enum from ECUV5_GPIO.h)
"SlaveSelectSPI" = dword: 5E0; SlaveSelect Pad in SPI-Mode (CSPI1_SS1 PAD (GPIO1.19), Entry Enum from ECUV5_GPIO.h)
[DeviceLibMeta]
"Dll" = "Can.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"DriverName" = "CAN1:"
[DeviceLibMeta]
"Dll" = "buzzer_711.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"PwmDriver" = "PWM1:"
[DeviceLibMeta]
"Dll" = "KAPALP_712.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 1
[Parameter]
"SpiBusName" = "SPI2:"
"SpiCs" = byte: 1
"PadEntryReset" = dword: 9F5
"PollCycle" = dword: A; poll cycle in ms
"Orientation" = byte: 1; (0 =>normal orientation, 1 =>180 В° rotated)
"NamedEventRead" = "KAPALP_712_READ_EV13"
"NamedEventWrite" = "KAPALP_712_WRITE_EV13"
[DeviceLibMeta]
"Dll" = "dltouch.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"TouchPointingDevice" = "{25121442-08CA-48dd-91CC-BFC9F790027C}"
"TouchVendorDevice" = "{B2B96E2F-570D-4975-B5F0-01B04FF2DF04}"
[DeviceLibMeta]
"Dll" = "Common.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"EEPDeviceLib" = dword: 3
"FlashDeviceLib" = dword: F
[DeviceLibMeta]
"Dll" = "ecuv5_gpio.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"GPIODriver" = "EIO1:"
[DeviceLibMeta]
"Dll" = "backlight.dll"
"Verbosity" = dword: 000000007; 1 - Error, 2 - Warning, 4 - Info, 8 - Trace, ...
"Instance" = byte: 0
[Parameter]
"BacklightDriver" = "BKL1:"