[X]Assistant

[Fantom45]

Digma iDs10 - Firmware
Digma iDs10, Ployer MOMO11 Bird Edition
Description | Discussion пїЅ | Firmware пїЅ

Digma iDs10 is the OEM version of the Chinese tablet Ployer MOMO11 Bird Edition.
Official firmware from the progenitor and compatible custom (aka Cyanogen Mod 9,10)
fully fit.

ATTENTION! HERE IS DISCUSSED DIGMA IDs10 TABLET FIRMWARE WITHOUT 3G. FOR TABLETS IDs10 3G, Explay Informer 921 THESE FIRMWARE NOT SUITABLE !!!
BE CAREFUL!

Ids10 3G firmware themelink

ATTENTION! When flashing, use the cable that comes with the tablet!

Please kindly read carefully!

Dear forum users!
Be mutually polite! It’s customary at our forum to say "Thank you" by increasing your reputation by clicking on the button.
If you have less than 15 messages, then click on the button and let us know who helped you.
We kindly ask you to stick to the subject line, to avoid flooding and offtopic!

Beginners, old-timers, regular readers and rare writers!

You have probably noticed that a large number of people, sometimes, simply register on the forum in order to “somewhere quickly ask your question, get an answer and disappear.” We are not against such a turn of events and are always ready to help.
However, there is a limit to everything and your unwillingness to use the navigation on the forum, where there are already 99% of the answers, to the questions you want to ask, to read the information already existing on the questions asked, as well as messages that are not on the topic - causes negative emotions .
We call: if you are not sure - write in a personal moderator or curator - we will tell you where to turn.
Please understand that without following the Rules of the forum and sections - you create a lot of inconvenience to everyone, and then declare that the topic is a mess.
We hope for your understanding. Your "quick" creates a bunch of problems for other people.

Drivers and Utilities

DIGMA STOCK RECOVERY
digma_recovery.zip

CWM RECOVERY
Current versions:
6.0.1.0 new
5.5.0.4
ClockworkMod recovery FAQ

LiveSuit
Russian version 1.09
English version 1.09

USB DRIVERS
USB_driver_XP
USB_driver_W7
LiveSuit_UsbDriver_С…64

Official firmware

The firmware data is installed using LiveSuit software.

Android Ice Cream Sandwich (ICS) 4.0.4:
From the manufacturer (stock):
Official page on the firmware tablet Digma iDs10
- DigmaForum firmware repositoryddixlab .
- Ployer:
MOMO11android4.04_20120907
MOMO11 BIRD 404 CH-0831
MOMO11 е°Џйёџ android 4.04_20120705;
MOMO11Bird (MOMO11 小鸟 版) Android 4.0 firmware 20120515_with PLOYER LOGO working;
MOMO11Bird (MOMO11 小鸟 版) Android 4.0 firmware 20120522_with Neutral LOGO;

Unofficial firmware

Firmware data is installed from CWM Recovery
Page follower of the work of Christian Troy-Shaun2029 CyanogenMod 10 Tweaks NEW!
CyanogenMod 10 (4.1.1 Jelly Bean) NEW!
Android Ice Cream Sandwich (ICS) 4.0.4:
CyanogenMod 9 (CM9) Last;
A source:SlateDroid Android Tablet Forum - Christian Troy CM 9
Android Open Kang Project (AOKP) working;
A source:SlateDroid Android Tablet Forum - Christian Troy AOKP

Unofficial firmware from kalininlelik (MOMODIGMA, etc.)
Differences between the MOMODIGMA firmware and the official MOMO.
Firmware data is installed from CWM Recovery
MOMODIGMA V 0.2
MOMODIGMA V 0.3
CM9DIGMAv0.1
MOMODIGMA v0.4
MOMODIGMA V 0.6
MOMODIGMA V 0.8

GAPPS
Liteworking
Official
COMPATIBILITY
907c

Instructions

MOMODIGMA firmware installation instructions

1. We put CWM Recovery - the instruction is in the header, see below.
2. Download the zip archive with the latest firmware (the latest versions are in the header), copy it to the root, to the external sdcard (the card must be formatted in FAT32).
3. Boot into recovery (hold down VOL- and power button)
4. Select there "wipe data / factory reset"
5. Next, put the firmware. It is done this way: choose "install zip from sdcard" / "choose zip from sdcard", select the firmware file, confirm and wait for the download to complete.
6. Go back to the main menu and click "Reboot system now"
If you need a backup of the previous firmware, then first in the recovery menu, select Backup and Restore and then Backup (you need at least gigabyte of free memory)
By menu recovery crawl button Vol- (Vol + works in version 6.0.1.0)
Apply - power button
Back - back button.

CWM RECOVERY Installation Instructions

Since the official checkbox in the settings is blocked by the ADB debugging checkbox, CWM Recovery should be installed from the tablet itself using the terminal emulator.

Installation is done in a few simple steps:
0) Put the terminal emulator on the tablet.For example this
1) Download the archivewith the installation script and CWM Recovery 5.5 itself (update - you can alsodownload v6.0.1.0)
2) Extract the contents of the archive to the root of the built-in flash drive.
3) Disconnect the tablet from the computer (if the above steps were performed using it) using safe extraction
4) In the tablet terminal emulator, type: chmod + x /sdcard/install_recovery.sh (given permission to execute this file)
5) Run the installation script itself: su /sdcard/install_recovery.sh
6) We are waiting for the completion of the script.
7) When asked to reboot in Recovery, answer yes if you want to reboot, and whatever, if not.
8) CWM Recovery is successfully installed!

Installation Instructions CWM RECOVERY with uno.kms

Pre-studyFAQ

- We start the terminal emulator:
app_89 @ android: / $ export PATH = / data / local / bin: $ PATH
- Log in as root root:
app_89 @ android: / $ su
app_89 @ android: / #
- Copy the archive from external SD to internal:
app_89 @ android: / # cp /mnt/extsd/cwm_digma.zip / sdcard /
- Go to the directory where you copied the archive:
app_89 @ android: / # cd / sdcard /
- Unpack the archive:
app_89 @ android: / sdcard # unzip cwm_digma.zip
Archive: cwm_digma.zip
inflating: install_recovery.sh
inflating: recovery.img
- Check the script execution rights:
app_89 @ android: / sdcard # ls -l install_recovery.sh
-rwxrwxrwx system sdcard_rw 784 2012-07-16 11:40 install_recovery.sh
- Run the installation:
app_89 @ android: / sdcard # sh install_recovery.sh
=============================================================
=== CWM RECOVERY INSTALL SCRIPT FOR ALL ALLWINNER DEVICES ===
=========== Writed by uno.kms fromsavagemessiahzine.comforum ===============
[*] Backup old Recovery ...
[*] Install CWM Recovery ...
[*] Installation complete.
Reboot into CWM Recovery?
Answer: no
Goodbye!
- Reboot
app_89 @ android: / sdcard # reboot
- CWM Installed.

Installation instructions for CWM Recovery after flashing the tablet to one of the MOMO firmware (without using a terminal emulator)

Installation instructions for CWM Recovery after flashing the tablet to one of the MOMO firmware (without using a terminal emulator)
1. Downloading CWM Recovery, extract from the archive and:
2. when the tablet is disconnected from the PC, go to the settings-for developers, make sure that it is worth the "USB debugging" checkbox
3. The charger must be disconnected from the tablet.
4. connect the tablet to the PC, the port should NOT be used on the tablet, which is NOT USB HOST
5. If no drivers were previously installed, the system will find a new device and ask for a driver (download USB drivers from the next section)
6. After installing the drivers, make sure that the Task Manager has an Android ADB Interface device, and the drivers for it are installed correctly. If the drivers are not installed (Windows may not see them due to the lack of digital signatures) - manually install them manually.
7. Run the file 1. ## Recovery.bat, the cmd window opens. We connect the cable to the computer, then to the tablet. Click the "y" button and then "Enter"
- Installation of recovery begins.
After this, press any key
And the tablet is rebooted into recovery mode.

Briefinstructionfor installing CM9, thanks to Indo

The required files can be found in the header.

Instructions on firmware using LifeSuit

The required files can be found in the header.

Instruction в„–1thank you Fantom45
Instructions в„–2 from DDIX LAB

Installation Procedure:
1. Download the installation utility on your computerhttp://www.ddixlab.com/public/digma/tablet...Suit%20Pack.rar
and unpack it. WinXP / Vista / 7 32 / 64bit utility.
2. Install the driver from the vtcdrv folder in accordance with the version of the operating system (see readme.txt)
The actions specified in paragraph 1-2 are performed once during the first installation; they are not required to be repeated upon repeated updates.
3. Download and unzip the firmware file on your computer.
4. In the folder LiveSuit run the file LiveSuit.exe
5. Use the SelectImg button to select the firmware file to be updated.
6. Turn off the tablet completely.
7. Press and HOLD the Volume + button on the tablet.
8. Connect the computer with a cable to the tablet USB connector (NOT to the HOST connector, if available, but simply to USB),
For iDx10, it is closer to the headphone jack.
9. Several (5-7 times) quickly press the POWER button on the tablet, then release the VOLUME + and POWER buttons
10. After 3-4 seconds, the update process will start, you will be offered to format the memory, agree,
the update process starts, which lasts from 2 to 4 minutes

Note.
When you first connect the tablet it will be possible to automatically install the drivers, it will take some time
and the update process may not start, then repeat the update procedure.
In some cases, the drivers are not installed automatically, then run the files in the LiveSuit folder
LiveSuitPack_version_1.07_2011026.exe and LiveSuitPack105_english.exe, then start the update process from step 4

Instruction number 3

Download LiveSuitPack to a separate folder

1. At the beginning of the installation, select the language "English". The program will be installed in the same folder.
2. Launch LiveSuit. If the drivers are installed, a window will open in which we will be offered to open the instruction. Click "No".
3. Next, in the program window, click the button "Select Img" and select the firmware that you previously downloaded and want to install on our device.
4. Next, turn off the tablet
- connect the cable to the computer first
- !!! CLICK THE VOL “VOLUME” BUTTON AND DO NOT RELEASE BEFORE THE START OF THE FIRMWARE UPDATE PROCESS !!!
* When the firmware is not fully flooded and the machine is not working, you do not need to press the volume button before connecting to LiveSuite !!!
- then connect the cable to the tablet and continue to hold the volume button
- With the other hand, SEVERAL TIMES (5-8) often press the ON / OFF button and hold it until the formatting window appears on the computer. Click "Yes". The process has begun!

After the end of the firmware disconnect the tablet from the computer.

* If the drivers are not installed automatically, after installing Livesuit, then we install manually from the downloaded archive.
** if they were not delivered from there, from the folder with Livesuit installed, we try to start drvinstaller_X86.exe or drvinstaller_X64.exe for 32 bit or 64 bit OS, respectively.

Backups

Instructions for creating a backup copy of the firmware.
CWM RECOVERY
Net stock reservecopy.
File checksums. Check after downloaded!

Cap updates

Last updated today.

Frequently asked Questions

Read a must!

All materials presented in this topic are the result of the work of the forum participants.savagemessiahzine.com, as well as recycled or translated materials from other authors (with reference to the source). Therefore, articles or recommendations may contain inaccuracies or errors. If you decide to use the information provided in this topic, then you do it at your own peril and risk and forum participants do not bear any responsibility for your actions.
Please always rely on your own common sense.

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through the "Complaint" button under the messages to which you want to add links.

Post has been editedsnekt @ - 27.10.14, 00:08

Reason for editing: corrected the link to the instruction transferred from the Discussion.

[Srejzor]

Guys help, I can not find the file in order to make the screen sensor in the tablet that it would work, I asked and the sensor does not work, the instructions need a file
COMPATIBILITY 907c and where to get it I don `t know how to be? the sensor still doesn't work

[duglas2014]

Fantom45,I have questions you even when that links are not checking one does not work everywhere the file is NOT FOUND or 404: suicide: suicide ::

Posted on 1/18/2019, 17:28:

kalininlelikand the link where I just shocked infu and the link that they forgot

[kalininlelik]

duglas2014nothing that the tablet is more than 7 years old and is it completely irrelevant now? All infa long been worn!

[duglas2014]

kalininlelikI understand that, well, my neighbor found one that needs to be flashed purely for movies because Wi-Fi doesn’t work then how about being a

[kalininlelik]

duglas2014 @ 01/23/19 8:08

how then to be

I can not help, even the manufacturer has removed the firmware from his site.

[Konstantin.P]

duglas2014
I dug out some two firmware (+ live), but I don’t remember which ones I didn’t check (sew at your own risk) -link to disk.

[prodromo]

Srejzor @ 01/04/19, 20:19

instructions need a file
COMPATIBILITY 907c and where to get it I don `t know how to be?

You have 907c_compatibility file

907c_compatibility_1.2.0.zip(340.77 KB)

Post has been editedprodromo - 26.01.19, 15:02

[duglas2014]

Konstantin.PWell, thank you. Pipets and so the Wi-Fi does not work, but I ask yours, and the corpse is the logic where I need a proven firmware and not raw and not clear

[Konstantin.P]

duglas2014
I apologize.
But, first, I threw off only what I had, and, secondly, I warned that the firmware was not tested and you sew it at your own peril and risk.
Your tablet may have problems with the file system of the memory partitions or with the flash memory chips themselves.
If there is a file system error, then perhaps formatting partitions with firmware will help.
Actually, did you do wipe with the firmware (wipe, cleaning partitions)?

Post has been editedKonstantin.P - 30.01.19, 12:04

[duglas2014]

Konstantin.PWell, if I came here, it means I have already rechecked everything

[Konstantin.P]

duglas2014
Write in detail what exactly you have done and how.

[duglas2014]

Konstantin.P, zbros from wasps and from recovery, the wi-fi module itself was discharged and connected to a PC via a resistor

Posted 01/30/2019 12:35:

Konstantin.P, what else do I say? I rechecked everything

[Dizak45]

Fantom45,
I can not download any of the firmware MOMODIGMA