Samsung GT-I9100 Galaxy S II - Modified and stock cores. Spoiler (+/-) * (firmware core and obtaining root) *
name of the archive in which the core can be absolutely anyone. must prisutvovat file * zImage * without expansion in the archive. This is the kernel image.
In order to get Ruth, you need to flash the kernel as root - not stock. For beginners are recommended CF-Root or PhilZ, appropriate to the version of the firmware. Firmware version is listed in the settings - information on the phone - * * build number.
* How to flash the kernel *
*1. If a new phone and no root. *
* 1. The first method - through ODIN (kernel .tar file * or * .tar.md5): *
The same method should be used if you have requested the kernel not for your firmware / phone and the phone is not loaded.
1. Turn off the phone.
2. Go to the download mode (three buttons - volume down + home + power). We confirm that we want to flash the custom firmware with the "volume up" button. It is also possible to enter this mode by inserting the jig into the switched off apparatus. If the sbl.bin bootloader is old, then the custom firmware counter will be reset. If new - just be the firmware download mode.
3. We connect the device to the computer
4. Run One
5. PDA line indicates the kernel file that we are going to sew.
As a result, before pressing the "Start" button, everything should look like this:
Attached Image
After the end of the firmware, the phone will reboot.
The following 2 methods are suitable if you have installed CWM application and have CWM of Recovery Mode
* 1.Vtoroy method - via stock (third) Recovery (kernel file * .zip): *
For the method, an external flash card and signed a zip with the kernel. There is a signed version of PhilZ in core subject on xda, estpodpisanny zip with Siyah 4.1.5
. Thanks for Siyah SW. Tankermeat
.
1. Copy the * .zip file with the kernel to an external flash card.
2. Turn off the phone.
3. Go to recovery (three buttons - volume up + home + power).
4. Select the "apply update from external storage" item.
5. Choose a zip with a kernel.
6. Wait for the installation to complete, restart the phone.
* 2. If there is Ruth and CWM. *
* 2. The first method (core in * .zip) *
1. Copy the * .zip file with the kernel to the phone (not necessarily to an external card).
2. Turn off the phone.
3. Go to recovery (three buttons - volume up + home + power).
4. Select the item "install zip from sd-card".
5. Choose from which card you will install - external (sdcard) or internal (internal sdcard).
5. Choose a zip with a kernel.
6. Wait for the installation to complete, restart the phone.
* 2. The second method (core Original zImage file or tarball archive (tar)) *
Run the CWM Manager program - select the Flash Kernel in the menu item, choose your kernel. Or via Mobile Odin Pro - you can flash kernels in tar archives or non-archived zImage files. The place to put the file does not matter, in the program you can specify the path where the kernel is in the embedded explorer.
"* Firmware any non-native kernel Samsung custom firmware causes an increase of the counter and the appearance of a yellow triangle in piercing through one. When CWM piercing through it does not.
* When the kernel is flashed, user data is not affected.
"