> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


51 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> ONDA Vi40D (DualCore) - Firmware
gloriamas
Message#1
13.07.12, 08:10
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 498
Check in: 10.10.09
Xiaomi Redmi 5A

Reputation:-  63  +

ONDA Vi40D (DualCore) - Firmware
PictureOnda Vi40D_16Gb / 32Gb
Discussion | Firmware | Discussion Onda V971 | Discussion Ritmix RMD-1035 | Discussion Onda Vi40 Elite / Ultimate

Official firmware
Onda Vi40D_v1.5.5_24.10.2012Stitched through the cable. First, carefully read the instructions under the spoiler "Instructions".
Onda Vi40D_v4.2.2D_2013-07-04 (only for version V1 and V2)Reading the message # 844
Onda Vi40D_v4.2.2H_2013-07-04 (only for version V3A and V4A)Reading the message # 844

Modified firmware
Vi40D_1.5-EN01b
Modified firmware based on the official Vi40D_v1.5 (from 2012-9-22)
Posted by: valkoz
-----------------------------------------------------------------------------------------------------------------------------------
Vi40D_v1.5-EN01b
Modified firmware from Bored.s Vi40D_v1.5-EN01b
(Release Date: 2012/09/23 slatedroid.com) is based on the official firmware Vi40D_v1.5
-----------------------------------------------------------------------------------------------------------------------------------
Onda Vi40D_v1.5.5_TF Flash
Modified Russian from Bored.s. The description is like in the header, except for the hosts — it is empty, and the browser does not have one; put it from the market to which one you like. Based on the official firmware Vi40D_v1.5.5, but put from the card.
-----------------------------------------------------------------------------------------------------------------------------------
Onda Vi40D v2.0-1129SD_RU01 from Bored.s
1. Added Route
2.Swept Chinese software
3. Samsung GT-I9100 device model
4. Tviki: TouchScreen, WiFi - extended scanning interval to save energy.
5. Language is Russian
Installation Notes from Chinese Instructions:
First install 4.1, when upgrading from 4.0 to 4.1
After flashing and rebooting the tablet freezes on the “ONDA” screensaver, this is normal. Take a clip, a toothpick and holding the "HOME" button, click "Reset". After turning off the tablet, repeat the flashing in the standard way. In the future, everything should be sewn normally, without tambourines.
------------------------------------------------------------------------------------------------------------------------------------
Onda Vi40D v2.2 SD JB-4.1.2
JB-4.1.2 firmware from 2013-01-12.
Chinese software drank, Model device GT-I9100, Root is. Multilanguage, English by default.
Stitch with the card. Unpack the archive, put the attached files in the root of the TF card.
Press and hold the "HOME" key, then press the power button. Release the power button after turning on the tablet (white android on the display), and do not release the “HOME” key. When the image of the green android appears on the screen, release the “HOME” key.
Attention!!!When you switch from 4.0 to 4.1, the tablet will hang on the "ONDA" screensaver. While holding down the "HOME" button, press the "Reset" clip. After turning off the tablet, rerun the firmware as described above.

Instructions
Instructions for updating the tablet via cable firmware: v1.5.5, 2.0, 2.1, the utility "USB Burning Tool SPI"Tyk
------------------------------------------------------------------------------------------------------------------------------------
Instructions for flashing the tablet with official and modified firmware: v1.0-1.5, 2.0, 2.2 - using TF microSD cards.
Preparation for firmware:
1. Download the firmware file to the PC;
2. Prepare a TF microSD card in FAT or FAT32 format, with a minimum capacity of 512 MB, and preferably 1-8Gb;
3. Make sure the tablet battery is more than 80% charged;

The order of the firmware:
1. Unzip the firmware package so that the corresponding folder appears.
Attached Image
2. Install the TF card into the card reader device (or another TF card supporting device), and connect it to the PC. Then open the folder with the previously extracted files, and copy all the files (you can not copy the readme) to the root directory of the TF card.
Attached Image
After the files are copied from the computer to the TF card, safely disconnect the card reader;

3. Turn off the tablet properly, and then correctly insert the TF card into the appropriate slot on the tablet;
4. Press and hold the main key (“Home” button) and do not release, then press the power button to start the download. Release the power button after turning on the tablet (white android on the display), and do not release the “Home” button. When the image of the green android appears on the screen, the “Home” button can be released.
Attached Image

The update is done automatically. The row at the bottom of the screen will start filling from left to right.

5. The tablet, after completing the update, will automatically reboot. If the tablet does not restart automatically, start it in the usual way.


Note:
1. Before upgrading, please ensure that the tablet is fully charged.
2. Save important personal data before the update, as the update process has its own disk format, and the original data will be lost and cannot be restored;
3. During the update process, do not click on the tablet buttons to avoid errors when updating.
4. Please read this list of instructions carefully before updating.

Ps. The file "factory_update_param.aml" specifies the order in which the instructions are executed during the firmware process.
--update_package = / sdcard / g12refM1005-ota-eng.hai.wang.zip (the file name changes and depends on the firmware)
--update_patch = / sdcard / update.zip (on the latest firmware ... = / sdcard / patch.zip)
--wipe_data
--wipe_cache
--wipe_media
---------------------------------------------------------------------------------------------------------
The process of preparing a new, out of the box, and after flashing the tablet to 1 use.

1. Download on PC, withsavagemessiahzine.com, the application "ES Explorer.apk"
2. Download firmware 1.0-1.5, with caps.(Warning: Root is integrated into all Vi40D firmware).
3. Exit Ineta, disable antivirus.
4. Unpack the firmware files to the TF card (to the root) + upload the previously downloaded "ES Explorer" (better to a folder, for example Distr)
5. Charge off. tablet (control charging by pressing the power button. As soon as the strips stop moving, the tablet is charged)
6. Insert the TF card into the tablet. Pressing and holding the "Home" button on the panel, press the power button. When a white android appears, you can release the power button and hold the "Home" button. Next, a green anroid appears, and under it is the download bar. The "Home" button can be released. The firmware runs automatically, after which the tablet will reboot.
7. Booting, through the settings set: language, keyboard layouts, time and time zone, USB debugging.
8. Install ES Explorer, reboot and install in the settings of the Root-rights program (Root-explorer, Root folder, Connect system folder)
9. Connect to the PC and in the Distr folder on the TF upload the corrected hosts file (127.0.0.1 localhost)Download
10. Disconnect from the PC, open ES Explorer. Select - "external_cdcard>Distr>long tap on hosts file ">Select - "Move to ....") and click on the shortcut folder arrow several times. Select - "Device>system>etc "and click OK. Confirm file replacement.
11. Connects to WiFi. Open "Applications" and launch "Onda Store (AnZhi)". Download any application. Run it. You may be prompted to upgrade Chinese programs. Did not do.(so we go around error 101)
12. In the tablet settings register account. Launch the Market. Download the application. (Control of the absence of 101 errors)
13. In the "ES Explorer" open - "system>app "and remove unnecessary Chinese programs. You can leave" Onda Store (AnZhi) ".

Root and Market
Tablet on firmware v1.0-v1.5.5 rutovanny and with the Market.
Root on firmware v2.0Flash the patch as well as the firmware from the memory card, after unpacking the RAR-archive into the root of a blank SD card, which is formatted in FAT32.

For questions about filling the header, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.

Post has been editedUksus17 - 20.09.15, 16:21
Reason for editing: replaced the broken link to Onda Vi40D_v1.5.5_24.10.2012, Link to all Onda tablet firmware
igorvp56
Message#2
15.07.12, 19:07
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 68
Check in: 19.07.11

Reputation:-  4  +

I did everything according to the instructions, the tablet was stitched, it rebooted - 2 the map still goes as an external. Progs can not be put there-in short for luggage card
sargksv
Message#3
16.07.12, 00:17
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 714
Check in: 15.07.12
Xiaomi Redmi 4X 3/32

Reputation:-  104  +

I sewed on the instructions. Successfully. Аpp 2 SD doesn’t move to external SD-stick.

Post has been editedsargksv - 16.07.12, 00:19


--------------------
RR + Clarity
izon
Message#4
16.07.12, 02:19
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 730
Check in: 24.10.05
Xiaomi Mi Max Prime

Reputation:-  39  +

It seems like they wrote that in this firmware wi-fi reception was slightly improved. Is it so?

1. Improve WIFI network connection speed;
2. Optimization system performance;
3. Optimization system file manager, external TF card and OTG file management more convenient;
4. Optimization Ethernet card compatible, new SR9700 chip ethercard support;
5. HDMI TV output line;

By the way, in the course will soon be 4.1 and for us))) for Elite has already been announced.

Post has been editedizon - 16.07.12, 02:29


--------------------
Panasonic TX-32LX70 + AC Ryan PlayOn! HD ACR-PV7310 + BeeLink GT1
Xiaomi Mi Max Prime/MIUI Global Stable 10.2.1.0+ Xiaomi Mi Band 2
eska
Message#5
16.07.12, 13:19
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 58
Check in: 29.12.07

Reputation:-  1  +

Who can upload firmware, for example, on narod?
I do not swing from kiteazov.
igorvp56
Message#6
16.07.12, 14:02
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 68
Check in: 19.07.11

Reputation:-  4  +

After flashing Wi-Fi did not get any better. But the apartment does not fall off even after two w / w walls. But it’s better not to take a hand near the camera - screen
gloriamas
Message#7
16.07.12, 16:43
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 498
Check in: 10.10.09
Xiaomi Redmi 5A

Reputation:-  63  +

I threw the firmware on the people.

Post has been editedgloriamas - 16.07.12, 19:01
bozhko91
Message#8
17.07.12, 11:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 300
Check in: 30.08.11
Motorola DROID RAZR MAXX HD

Reputation:-  27  +

Zdarov guys how to make a root on it, (really "direct" and working method)!
:)
miant
Message#9
18.07.12, 09:36
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 202
Check in: 30.10.08
TCL M3G

Reputation:-  17  +

How to make it on root
So like firmware already rutovannaya ...
pivanet29
Message#10
18.07.12, 23:26
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 208
Check in: 24.08.11
Xiaomi Mi 2S

Reputation:-  4  +

Gloriamas @ 07/13/2012, 08:10*
--update_patch = / sdcard / update.zip


supper! - and in this line, I suppose that "useful" Chinese attachments are put to the bare android ... interesting ...
gloriamas
Message#11
19.07.12, 04:54
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 498
Check in: 10.10.09
Xiaomi Redmi 5A

Reputation:-  63  +

pivanet29
If you are interested, the order is as follows:
1. Unpack the firmware itself
2. Then unzip the update.zip folder
3. In the folder, go to the system>app
zorgeprof
Message#12
19.07.12, 14:37
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 155
Check in: 27.04.11
LG KP500 Cookie

Reputation:-  3  +

Gloriamas @ 07/19/2012, 04:54*
If this order is interesting: 1. Unpack the firmware itself2. Then unzip the update.zip3 folder. In the folder go to the system>app

I tried to remove the excess from there and update it, please - it fell out with the update.zip update error. simple removal did not help.
Igor192
Message#13
19.07.12, 15:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 217
Check in: 23.01.06

Reputation:-  11  +

It would not be a bad instruction to read from anyone regarding the removal of all Chinese in the firmware and the installation of the default Russian language.
Thank you for your help.
zorgeprof
Message#14
19.07.12, 15:33
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 155
Check in: 27.04.11
LG KP500 Cookie

Reputation:-  3  +

Igor192 @ 07/19/2012, 15:12*
It would not be a bad instruction to read from anyone regarding the removal of all Chinese in the firmware and the installation of the default Russian language.


I can only say that everything Chinese is quite simply deleted with the help of Link2SD
В® Titanium Backup (Post # 9785789)
Igor192
Message#15
19.07.12, 15:44
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 217
Check in: 23.01.06

Reputation:-  11  +

zorgeprof
Thanks for the info. This operation to remove all Chinese - goes off with a bang and with other software.
The essence of the question remains open, since it is directly interested in removing Chinese software in the firmware, for further flashing the tablet, but already without Chinese entertainment, it is also as interesting as installing the default Russian language in the firmware.
Thank you.
SammoLove
Message#16
20.07.12, 05:50
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 279
Check in: 29.03.12

Reputation:-  11  +

Join now. I would like to immediately facilitate the firmware from Chinese programs and other types of Phone, Email, Contacts, Exchange, MagicSmokeWallpapers, and other unnecessary.
It is a pity you can not just put on the rhythm. The firmware there is valid for a single-core onda, everything improves at once.

By the way, they promise 4.1 soon. Is it better or not in a hurry?
apiltyay
Message#17
20.07.12, 09:10
Novice
***
[offline]

Group: Active users
Messages 31
Check in: 24.01.11
LG Optimus Link

Reputation:-  2  +

1. Unzip the downloaded firmware.
2. In the unzipped folder with the firmware, find the archive "g12refM1005-ota-eng.hai.wang".
3. Unzip it.
4. Inside this folder, open the "system" folder, then the "app" folder.
5. Delete both files with an unnecessary application (.apk and .odex).
6. Archive the modified folder "g12refM1005-ota-eng.hai.wang" (by deleting the old archive).
7. Do steps 2-6 with the archive "update".
8. Archive the shared folder with the firmware (deleting everything unzipped).
eska
Message#18
20.07.12, 13:21
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 58
Check in: 29.12.07

Reputation:-  1  +

Wonderful, who will make a modified firmware without Chinese?
There is a place in the cap under the spoiler.
User888
Message#19
20.07.12, 21:19
Visitor
**
[offline]

Group: Active users
Messages 24
Check in: 17.02.12

Reputation:-  0  +

apiltyay
So basically all the Chinese programs are in the archive update.zip
falco.zp
Message#20
21.07.12, 00:50
a guest
*
[offline]

Group: Users
Messages 4
Check in: 22.03.12

Reputation:-  0  +

Comrades! Share China prog share please. But it is not possible to understand what is called. Suddenly I will delete the necessary one: sveta:
User888
Message#21
21.07.12, 08:30
Visitor
**
[offline]

Group: Active users
Messages 24
Check in: 17.02.12

Reputation:-  0  +

falco.zp
All Chinese programs are in the archive update.zip
He deleted everything himself, instead of them, he put a couple of his progs, archived again in update.zip, but with firmware, he gives an error signature verification failed
What to do next, I do not know yet.
Can anyone help?
ONDA
 

51 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19 9:51 AM