[X]Assistant

[Kill spirit]

Explay Informer 702 - Firmware (OS 4.0)
Explay Informer 702 / Teclast P75HD

Description | Discussion пїЅ | FAQ | Purchase пїЅ | Accessories пїЅ | FirmwareпїЅ

Explay Informer 702 copyTeclast P75HD- now we are discussing Teclast P75HD firmware here.

Before you ask a question!

• Rollback to Android 2.3 for our deviceimpossible, heremore details. Only on Teclast, but such a rollback is "buggy."
  
• LuckyPatcher requires SuperUser to complete its work.
  
• When flashing the tablet, it will not be possible to kill the tablet, as you can always flash through LiveSuite in firmware mode (Power, Volume +).
  
• If LiveSuite freezes when you enter the tablet into the firmware mode, the thing is that the USB cable does not have enough power. Reconnect it to the USB-connector on the motherboard, do not connect to the hub.
  
• Recovery for Android 2.3 does not exist.
  

Drivers and necessary programs

Program for flashing official firmware - LiveSuite
The program for firmware in Russian
x32 from Explay website32Bit_Win_7_Vista_XP.rar(1.62 MB)

x64 - from the Chinese firmwareg¤-¦¦¦¦Є.rar(17.05 MB)

Explay Informer 702 - Discussion (Post # 16262781)- another 64 drivers.
If ADB drivers are not installed

Modifications

Increasing the size of the system partition

For those who want to flash, or have already flashed, or have just purchased the device, and do not want to flash. (concerns usersLIVESUIT firmware)

You need to install CWM Recovery, make Backup, then Restore (faster — advanced restorerestore system). If you have a stock firmware, then the memory on the tabletautomagicwill increase by 2 times, and more specifically to 512 mb.

Under the / system partition, a limit of about 250 MB is officially established. By doing backup and restore / system, we
1. Reformat the / system partition - ALL allocated memory will be used
2. From the backup, we restore the DATA from this section. And everything works, everyone is happy ^ _ ^. You will have about 270 MB of additional space in the / system partition, 20 megabytes of which are needed by force, the rest will be for ... for nothing.

Information author:ttimer

Only for Android 4

New battery and buttons in the lower bar, and a new picture of the USB connectionhere
Another battery option
And one more battery
Editing buttons, and remove the non-working item "bluetooth".

ConROM only

Increase time and stability by replacing build.prop | Description of the changes

Who does not run Conti from ttimer'a.

We put the Linux boot log instead of bootanimation at startup. Root requiredRoute is needed by the Live Dmesg program.

Kernel with init.d support -Explay Informer 702 - Firmware (Post # 15010343)

Firmware options

Official firmware

About Android 4.1 (Jelly Bean)

Explay Informer 702 - Firmware (Post # 15571228)

Firmware 4.0.3 official. Download firmware from explay site

Firmware from Teclast officialand alternative links withPeople

2.3 by Teclast

We put 2.3 from Teclast on 4.0 and clean it from garbage - but this is not exactly a rollback, since the stock-official firmware is currently not possible to install on 4.0 -study here

They say this firmware -rollback buggy

Unofficial firmware

CyanogenMod 9

//savagemessiahzine.com/forum/index.php?s=&showtopic=357521&view=findpost&p=19242844

New, at the moment the best firmware from China. Longer holds the battery.

Stick me

Ale-Gee firmware

Download:
Explay Informer 702 - Firmware

Description:
Explay Informer 702 - Firmware (Post # 16186512)

ConRom v6. Firmware from Ainol NOVO7. Ttimer support.

Explay Informer 702 - Firmware (Post # 16421791)

Firmware from Teclast, it is recommended to install a modified from ya.AVG

Hereand alternative links withPeople
There is a Russian language in them - you need to switch (the settings icon, then below the icon with the letter A and there is 1 line above - this is a change of language).
Stock 4.0.3 from Teclastmodifiedby ya.AVGfirmware and description
Feedbackabout firmware from ya.AVG

ClockWorkMod Recovery

There is no recovery for Android 2.3 due to the fact that with this firmware the entrance to the recovery is impossible.

CWMR Android 4.
Recovery 6 versions:cwm-a10_6.0.1.0.zip(6.23 MB)

Install Recovery:Explay Informer 702 - Firmware (Post # 19423181) ^NEW

Enter Recovery:

1. Using a computer.
Open the command prompt and execute

adb shell "echo -n boot-recovery | busybox dd of = / dev / block / nandf count = 1 conv = sync; sync; reboot"

2. Using the Novo7tools program.

Boot to recovery.

3. On the "ConROM" firmware, access to the recovery is possible through the settings.
Restore and reset ->Boot recovery

Memory space markers

Read here

And here it is.

Who wants to try Linux?

Installing Linux under our device:instruction
Initial topics:hereandhere

Battery performance tests

The first
Second

We treat charge control.

Poll results

The results of the survey from 11.9.2012 to 29.09.2012.


The results of the survey from 03/11/2012 to 01/18/2013.

Entering the firmware and recovery mode without pressing buttons

In firmware mode
In recovery mode with micro-sd.

K

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 04.05.17, 21:54

Reason for editing: deleted broken links

[Fury495]

[email protected], 13:27

Chet does not load anything, how to be ????

Shay again. In the computer to form a memory card and in the recovery, make a wipe cache and dalwick cache, they are in different menus there.

[zevez]

when flashing it writes at the end:
Restoring system ...
data.img not found.Skiping restore of / data
And the same thing about .android_secure, cashe.img and sd-ext.img
and at the very end of Restore complete!
SO AND MUST BE ???


P.S.Kartu formatted, wipe cache and dalwick cache did

Post has been editedzevez - 02.08.12, 13:31

[zevez]

All the same, I can not flash it, the download goes and that's it ((((, and this can not be because I have 4 of. Is it worth it ???

[edenica]

I bought this device, everyone is happy but there are no root rights. And it seems they should be. How to make them appear?
Out of the box Android 4.0.3

[ttimer]

edenica @ 08/02/2012, 17:58

I bought this device, everyone is happy but there are no root rights. And it seems they should be. How to make them appear?
Out of the box Android 4.0.3

How is this related to FIRMWARE?

[mcsokrat]

who rocked and set1.00 ICS 4.0.4 of July 06from TEKLAST? ...

Does it make sense at all? and is there any difference between textbook 4.03 and our explay or is there nothing else besides programs and language?

Posted 02/08/2012, 15:11:

[email protected], 13:58

All the same, I can not flash it, the download goes and that's it ((((, and this can not be because I have 4 of. Is it worth it ???

and it will not work;) I had such a thing that I spat on it and that’s all ... we probably have animals with character, they don’t want to put back-ups on themselves;)

[edenica]

I wanted to reflash where I still have to ask how to get the rights of the root.

[hop-top]

try again, paste! You are not the first and you are not the last! : rofl:

[hop-top]

edenica @ 08/02/2012, 21:07

how to get root rights.

SuperOneClick - A program to get root rights using a computer.
Instructions for getting root rights:
Requirements:
- If using a computer with WinXP - install Microsoft NET. Framework 2.0 (or higher)
- If using Mac or Linux, install mono:http://www.go-mono.com/mono-downloads/download.html
- Be sure to need a driver to connect the computer with the phone via ADB (android debug bridge). They are usually supplied by manufacturers or come in one of the Android SDK Tools packages.
- Do not connect the phone in sd card mount mode
- Turn on at least once the Settings / Applications / Development / Debug USB item
- In some cases, connecting the phone in recovery mode will help.

[hop-top]

edenica,
SuperOneClick

[trollzilla]

"Cap" post byinvention of a bicyclefirmware mod from ttimer:
!!! First of all we sew recovery from the spoiler in the first message of the topic !!!
1 Format the memory card in the card reader and copy the firmware backup from the archive to the root
2 Restoring the standard parameters of the tablet in the settings with FORMATTING MEMORY (For paranoids)
3 Turn off the device
4 Insert the USB flash drive
5 Flash livesuit disc small-sd.img
6 We fall into the recovery
7 /
wipe cache partition
wipe data / factory reset
/ advanced ... /
wipe dalvik cache
wipe battery stats
/
wipe cache partition (For paranoids)
wipe data / factory reset (For paranoids)
8 / backup ... /
restore /
4.0.4_ttimer_mod /
Yes
9 reboot
10 We are waiting for download and enjoy!

Post has been editedtrollzilla - 02.08.12, 16:51

[mcsokrat]

Put TEKLASTOVSKYU 4.0.3 removed the Chinese software, and noticed one thing ... the device works better than on the explorer ... it is felt even by the response of the touchpad and the animation. menus .... so I advise everyone in the evening to check the beast on the GTA 3))))

[ttimer]

1. Have a textual 4.0.4
2. My fashion is based on a procluster one and so on. Base 4.0.4 is made, which is a full copy of the textlists, except for the cut out software, but ... See 3 :)
3. Did you sew through a live suite without additional manipulations? Try to throw at least something into the / system section: P

[hop-top]

,trollzilla
: D: rofl:
Oh yes it works: rofl:
crap : Blush: how to flash, the theme is already izjezhina a hundred times! Here's how to roll back to 2.3, this one at the office.

Post has been editedhop-top - 02.08.12, 18:10

[Dam2000]

And I did not like the request from ttimer.

[hop-top]

Dam2000 @ 08/02/2012, 23:18

And I did not like the request from ttimer.

the taste and color .........: yes2:

[ttimer]

Who does not install the program in my prosh (and Teklastovskoy) - go to my installer, or drag-to-install. My installer in the signature. The script bat installation is not so hot, I agree, but there you can see all the logs, and you can customize the script for yourself, if you wish. But, my "pride", well, is the registry files. go to the \ installer \ registry, open "installer.reg", and if you have the correct SDK - apk-patches will be placed by simply opening them. Immediately. And if something goes wrong, or you need to pervert (install it in a memory card, install it in the system partition, or FORCE to install the application somewhere - open the context menu, and select the commands that start with "place."

[dimov1977]

ttimer @ 2.8.2012, 20:57

Who does not install the program in my prosh (and Teklastovskoy) - go to my installer, or drag-to-install. My installer in the signature. The script bat installation is not so hot, I agree, but there you can see all the logs, and you can customize the script for yourself, if you wish. But, my "pride", well, is the registry files. go to the \ installer \ registry, open "installer.reg", and if you have the correct SDK - apk-patches will be placed by simply opening them. Immediately. And if something goes wrong, or you need to pervert (install it in a memory card, install it in the system partition, or FORCE to install the application somewhere - open the context menu, and select the commands that start with "place."

Sorry, but initially to realize that applications would be installed normally in the firmware can not be? Thanks.

[Fury495]

Ttimer @ 08/02/2012, 20:57

Who does not install the program in my prosh (and teklastovskoy)

How is it not installed? I ponastavil himself a pile of familiar software and everything is put, including programs that need root. True put on the memory where they put themselves by default and did not even think about it. I understand that they are put into the internal almost all but she is in fashion this flash card. Right?

I found only 3 problems with the mod - those that are written above and in the header.

[email protected], 14:09

when flashing it writes at the end:
Restoring system ...
data.img not found.Skiping restore of / data
And the same thing about .android_secure, cashe.img and sd-ext.img
and at the very end of Restore complete!
SO AND MUST BE ???


P.S.Kartu formatted, wipe cache and dalwick cache did

Try to flash one more time according to my instructions, I corrected it and added a bit. I missed something there at the beginning. I apologize. Must be set and run.

Post has been editedFury495 - 03.08.12, 07:49

[ttimer]

Regarding non-installing programs: this is a bug with an ADB of some kind, very strange. swears at "bad certificates" - in SOME, but at the same time the same programs are put on other droids, and, most interestingly, are put from the tablet itself.

Post has been editedFury495 - 03.08.12, 07:49