Instructions for installing custom firmware, if you have a formal ...
Set on our phone your computer's drivers ( http: //savagemessiahzine.com/forum/dl/post/1778215/SAMSUNG_USB_Driver_for_Mobile_Phones_v188.8.131.52.exe
Download and unzip Odin on your computer's desktop software ( http: //savagemessiahzine.com/forum/dl/post/1778187/Odin3_v1.85.zip
) 3. Download the CF-root for 4.1.2http://yadi.sk/d/aw0O6Yyn7Fa0YDownload the CF-root for 4.3 download4.
Odin Open the program, click the item PDA, after the appearance of the file selection window we select the downloaded earlier CF-root 5.
Translate phone in flashing mode (at the same time we press the Volume Down key + key + home key off and wait for not releasing the buttons until the phone boots in the boot and then click the Volume Up button mode) 6.
In this state, the device connects to the computer and see in Odin program illuminates COM label and then click the program start 7.
After flashing the device will reboot. 7.1.
Now install the program: https://play.google.com/store/apps/details?...ktool&hl=ru
Run, provide superuser and click the button entitledBackup efs 7.2.
Any manager go to the phone's memory and see a file called efs.tar and efs.img - advise those files stored in a safe location (on your computer, memory card and so on - it is very important !!!) 7.3.
Download recovery: http://d-h.st/yTG
- it is necessary to install custom firmware !!! 7.4.
Odin Open the program, click the item PDA, after the appearance of the file selection window we choose early downloaded rekaveri 7.5.
Translate phone in flashing mode (at the same time we press the Volume Down key + key + home key off and wait for not releasing the buttons until the phone boots in the boot and then click the Volume Up button mode) 7.6.
In this state, the device connects to the computer and see in Odin program illuminates COM label and then click the program start 7.7.
After flashing the device will reboot. 8.
If you have an application in the device and you do not want them for a long time after installing the new firmware to install and configure, install Titanium backup program ( В® Titanium Backup
). Sign it, the program will ask to grant root access - allow. Next, click the check box in the upper right corner of the screen and you will see how the program will give you a menu of its features. The opportunities we see a point to back up and select "Make all RK user software" "Start" button (click), then click the check mark in the upper right corner and see a pop-up window comes up like all of our programs and their data (Takes 2 minutes). 9.
Download the required firmware and we throw it to any location on the memory card (it is desirable to throw in the root of the card so as not to look, but it is possible and in any folder) 10.
Reboot your device in rekaveri (at the same time we press the Volume Up button + home button + button to turn off the unit and wait until you see the action menu) 11.
Here designation and brief description of the items rekaveri: reebot system now
(device reboot) install zip from sdcard
(install zip archive (firmware, patch, update) choose zip from sdcard
(selection of zip file (firmware, etc.) from the phoneвЂ™s memory)aply /sdcard/update.zip
(installation of the file under the name update.zip from the phoneвЂ™s memory (I have never been updated in this way before))toogle signature verification
(enable disabling archive signature verification) - to install any custom you need to disable this feature. That is, when you click on this item you should see Disabled at the bottom of the screen (usually disabled by default).choose zip from external sdcard
(selection of zip file (firmware, etc.) from a memory card)wipe data / factory reset
(reset phone to default settings (delete all settings you make, delete accounts and all user applications - as if you just installed custom firmware) Wipe Data / Factory reset
(Removed all the settings you made, delete the account and all the user applications - as if you just installed the custom firmware)Clean to Install a New ROM
(This item is available in custom rekaveriPhilZ Touch
and is used prior to installation of the new novel) wipe cache partition
(clearing the cache) backup and restore
(copy and restore firmware) backup
(copying the installed firmware to the phone memory)restore
(recovery of the firmware copy from the phone memory)delete
(deleting backups from phone memory)advanced restore
(rarely used partial restoration of parts of a previously saved firmware)backup to external sdcard
(copying the installed firmware to the memory card)restore from external sdcard
(recovering a copy of the firmware from the memory card)advanced restore from external sdcard
(partial restoration of a copy of the firmware from the memory card)delete from external sdcard
(delete all backups from the memory card)mount and storage
(mount and format partitions)
I will not describe much here and will only describe the main frequently used points:format / cache
(Formatting application data)format / system
(formatting the system folder - the firmware is completely removed (it is better to use before installing the new firmware))format / data
(formatting the data folder (it stores all your installed user applications (also desirable to use before installing the new firmware))format / preload
(formatting the preload folder (usually this folder is empty)) - apparently used to store temporary filesformat / sdcard
(formatting the phone memory (the part where you have music, downloads, photos, videos and everything else) - do not confuse with a memory card !!!format / external sdcard
(full formatting of your memory card)advanced
(additional recovery points) reboot recovery
(reboot recovery)wipe dalvik cache
(cleaning dalwick cache)
the remaining items describe it does not make sense because they are not used12.
Once logged in, select rekaveri points (where the items in rekaveri vysheislozhennom See the description) and confirm selection !!! If you have a custom rekaveri PhilZ Touch instead of all of the following items using only one -Clean to Install a New ROM!!!
- wipe data / factory reset
- wipe cache
- wipe dalvik cache
- format system
- format data
- format cache13.
Next, select the item choose zip from sdcard (if you lozhili firmware in the phone memory) or choose zip from external sd card (if the firmware is on your memory card).
After clicking on this item, either the phone's memory or a memory card opens to you and you just have to select your firmware and confirm its installation.14.
What will happen further - depends on the firmware itself.
Some firmware are stitched and you just see the running lines appear on the screen.
Some firmware (and now the majority) come with aroma installer inside. That is, do not be alarmed if you start the installation zip file suddenly colored box appears. Aroma installer allows you to choose the applications which place, the core theme and more. I would recommend you choose a custom (customize) the installation to choose what you want to see in the firmware, and that - no.
After installing the firmware you will see done. Some firmware immediately request permission to restart the device and you just have to confirm it, but if suddenly the request did not happen or you accidentally refused, then just in the recovery press the reboot system now item and confirm.15.
Now we just left to wait about 5 minutes until the firmware will start ;-)
Occasionally it happens that the firmware in any did not want to run for 10 minutes and then we go back in rekaveri (clamping three buttons) and do wipe data / factory reset; wipe cache and wipe dalvik cache and then restart the machine by pressing the item reboot system now. Expect 5 minutes. If you suddenly will not start now - so there was some sort of error occurred while installing the firmware, and it is necessary to knit begin with paragraph 10 of this guide.16.
After the firmware download the program run to reset the counter custom firmware ( В® Triangle Away
) And install it on your phone.
Run the program
We confirm permission to superuser
Reaffirm the right setting for the program data (program, these data will be downloaded from the Internet)
Then the pop-up window, click no sanks
Now the program click the item Reset flash counter
We confirm by pressing the Continue button
Phone will reboot in flashing mode with the question of whether to reset the counter and we need to prove it only by pressing the Volume Up key.
Thereafter, the apparatus starts again and restarts the operation mode counter is reset with already.17.
Now you can safely install the program Titanium backup ( В® Titanium Backup
We go into it, click the checkmark in the upper right corner, see the section "Recovery" and press select "Restore the absence of the data."
After the lapse of the time you will recover all your applications with their settings and data.18.
phone can now customize as you wish and enjoy .... CONGRATULATIONS !!! : Clap:: drinks: