[X]Assistant

[vadeus]

DiscussionWEXLER.Flex ONE
Discussion пїЅ | Description | Firmware пїЅ
Reviews:
- the-ebook Not a professional review of Wexler One
- ixbt Wexler Flex One eBook Review

Post has been editedvadeus - 08.10.14, 20:07

Reason for editing: firmware

[Mishael_13]

Yesterday, the manufacturer announced price cuts for a number of its models, including those on the WEXLER.Flex ONE - the world's first flexible book.
Now, instead of the exorbitant 9 thousand, it began to cost 6990.
Of course, it’s still expensive, but apparently there are no analogues. Began to look closely.
Has anyone already used this book? What did you think of it? Support seems to be - already the 4th version of the firmware on the site.

Posted on 06/22/2012, 10:42:

here is the link to the press release:http://wexler.ru/home/news/201206/191

Post has been editedvadeus - 22.06.12, 18:01

[vadeus]

Hereread.

[Mishael_13]

Thanks, I studied this thread;)
as I understand, there is testing with the very first firmware. I am also very confused by the fact thatsavagemessiahzine.comThere was no discussion of this device. a feeling that no one paid attention. and the book is really interesting because of its non-consistency.

[vadeus]

Mishael_13,
Software Wechsler traditionally miserable. And with a plastic screen, readers will be sprinkled now. Onyx promised promised, but something with LG screens (standing in Veksler) had too many problems, they were waiting for PVI.

[rabbit25]

Who talked about the problems? Everything is fine with them. Just someone from the manufacturers curves curves :)
As for PVI, it’s far from a fact that they will succeed. Their screen has been waiting for more than a year, but no progress.

Posted on 06/25/2012, 11:00:

vadeus @ 06/22/2012, 12:22

Software at Wexler is traditionally poor

Come on ... with firmware 1.4 everything was quite nice to use there. And then, it’s still difficult to demand from a company that has only been in the software market for a year and a half :) The same Pocket has been licking it for 5 years until it became convenient to use it. Everything has its time. Android also went to version 2.2 for three years, which became the first one more or less acceptable.

[Ice_and_Fire]

Finally broke the screen in a two-year-old wexler E6001.
I chose the week that in exchange ... I finally saw the new prices for flex one and decided that the impact resistance of the book is more important than its minuses. Sewn on 1.0.4 Everything is fine. fonts, settings, footnotes shows.
On the old site wexler was September firmware 1.0.5, but they didn’t post it on the new site ...

[Alex360]

I am faced with a choice of what to buy as a gift: WEXLER.Flex ONE or PocketBook 360+. And here is my vision of these devices. Found them in the online store MTS. The cost of books is the same, 3990rub. I went to the M-video there is more expensive, but on display is WEXLER.Flex ONE. Well what can I say, the fact that he is not beating and all rubberized, and besides still a little case and that’s all his pluses have ended. For a minute that I exploited him, he managed to hang on me. : lol:: lol: Only CUTS helped. : D The menu is just plain wretched. : blush: Hardly a living machine. Dumb or dumber, so it will be correctly described. Let the manufacturer not be offended at me. Although the processor is written 600Mg., But 64 MB RAM. probably. In short, the turtle is still that. I do not think that you can fix something with the new firmware. The fact that from the very beginning crookedly done firmware will not help. I didn’t like not only the interface, but also the management of the book. The buttons are hard and incomprehensibly pressed or not, because he thinks for a long time and does not draw sandy watches. Very ill-conceived device and its management. Probably the hands of the manufacturers are probably not growing from the shoulders, since they did it. And besides, it is unclear how they managed to 9000 rubles. Vparivat this .... people. Probably so wanted the company WEXLER cut down on the know hao of money. In all the reviews, for some reason, it is bent in different directions (in my opinion, it is not done for this), although the manufacturer claims that it cannot be bent. At the end of the reviews they write that it is reliable. I think the writing brethren do not understand what the difference between reliability and shock resistance. In short, a very raw slow book and probably never finish it.
PocketBook 360+. Twisted in the hands. I liked it. Although the monitor and the extension is smaller than that of the WEXLER.Flex ONE, you can also split the screen, but the interface is understandable, the device is responsive. Although the model is not new, but it's nice to work with it, and not to throw a stupid unbreakable WEXLER.Flex ONE with a psycho.
Probably buy a proven book PocketBook 360+, yet the nervous system is more expensive. And I advise you for the know-how not to chase, but to buy responsive, efficient and non-triggered devices.

[ded90let]

Something I do not hang anything and not buggy. The iron is normal there (and you don’t need to fantasize and misinform people), but the firmware is really a curve.
This is completely fixable, but whether WEXLER will correct it is unknown.
So far, right after the purchase - to reflash to the latest version and it is quite possible to use.
Someone got used to PoketBuk, whose software is much more developed, and it doesn’t interfere with it, which is stupid, slowed down and buggy compared to the PB tablet.
But for me on the WEXLER it is more convenient to read, although it is slower than PB. Everywhere their +/-.

Post has been editedded90let - 29.10.12, 23:25

[Alex360]

Something with the quality of WEXLER.Flex ONE some difficulties. Here in M-video I twisted WEXLER.Flex ONE and it hung up in a minute and left only negative. And today, in the MTS store, I tested WEXLER.Flex ONE it turned out to be a completely different device for testing. Although the firmware is old, but the work is normal and does not hang. The quality of the products I see is not stable. Therefore, the reviews are different. Someone like that, but someone does not.

Post has been editedAlex360 - 30.10.12, 14:45

[ockwell]

My own peace of mind is very important to me personally ... I probably lost my life about a dozen screens, including a couple of books. Moreover, I didn’t seem to be extreme, I didn’t ride over the roofs with them .... with this bills, I calmly read on the bus without a thought in the subcortex that some kind of grandmother would push me by the arm and the reader would blink on the floor ... if it blunt - nothing will happen to this, but the glass 50 by 50 will go to the trash ... Such calmness IMHO costs a couple of sput or even more (by the way, it costs already 4900)
Firmware 1.05 is decent, a, 2 processes pretty decently (the overview at the beginning of the branch is outdated), but of course there is still work and work ...
the curvature of the reading room is of course a design decision, for in the case all this curvature disappears and loses its meaning. The iron in it is very ordinary, the whole thing is in the screen, in my opinion everyone understands this. I used to read it in the position when the block with the buttons at the bottom - then you can hold both your left and right hand without changing the orientation of the screen. buttons tight, but after 3 days used. Screen (they wrote that it is yellow, then gray, then white) - its color depends on the lighting. On the street it is white, yellowish under a light bulb.

[horus_re]

For some reason, the display cases are all killed. At the same time the screen is killed, as a rule - the strip in the middle is not working. It seems that I want to buy such a device, but the question of reliability really suffers.

[ded90let]

No comments.

[ockwell]

horus_re,, is it really not clear why shop windows are killed ?? there is no need to be a psychologist;) ... everyone comes up and checks if he really bends? and how much bends? and does not break? and since it’s not yours — it’s not a pity, and since it’s coming up a hundred a day — that’s the result ... And by the way, what are you, are you planning to buy from the display case ????

[yorsh48]

The software from the bills is of course miserable, but the support works for them. I have a color budget reader for this company, I took it for 900 rubles, and surprisingly 4 firmware with bug fixes were released, although the functionality did not get better, but almost all the bugs were fixed, which is good news. So I think this company has a future, and they do not give a damn about users.

[SEmp91]

horus_re,it seems like the salt is precisely in the fact that such a screen can withstand falls and small deformations - just that, from which the glass and die.
And on the windows of his bend mercilessly, really)
add:video krashtest)

I wonder if they will soon release a book with flex on the android?)

Post has been editedSEmp91 - 25.12.12, 23:50

[Mitleyk]

What does he have with the speed of updating pages in comparison with the same Pocketbook 360?

Post has been editedMitleyk - 22.01.13, 21:37

[egorofart]

I do not advise taking this book before the new firmware, which would correct the current errors, and in particular the problem of power consumption and "ticking" watch.

[Crevedco]

Yesterday the Japanese bought 3 flexs from me and 2 more wants. Strange, in Japan they are strained with such books or something :)

[Stopkin]

Krevedko,I remembered an old joke about how the Japanese bought Soviet KRAZs: D
Or was it MAZ? : scratch_one-s_head: i don't remember already

[Stopkin]

competitor?
YITOA Rota EF602