> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Cube U30GT - Firmware



Rep: (119)
Cube U30GT - Firmware
PictureCube U30GT, -W, -H, -HS; iconBIT NetTAB Thor; Starway Andromeda S930; MyTab U30GT2; SHIRU Shogun 10 16GB; Mediacom SmartPad 102 s2
Description | Discussion пїЅ | Purchase пїЅ | Accessories and Peripherals пїЅ | Marriage and Repair пїЅ | Games пїЅ | Firmware пїЅ

Important information
ModelsCube U30GT-M (mini), пїЅ U30GT1(U30GTC4) , U30GT2 are discussed in the relevant topics.
ModelsIconbit NetTAB ThorLE , Iconbit NetTAB ThorX It has nothing to do with Iconbit NetTAB Thor, or with Cube U30GT.

If you purchased a tablet recently and in this thread for the first time -take the time to flash the tablet .
Before installing a new firmware, read this topic at least a week.
Remember, an error with the firmware can cause the tablet to be turned up.

Drivers and Utilities
RK_DriverAssitant - Drivers for Win7 and Win8 . Installing drivers for firmware on Win8.1 .
RKBatchTool v.1.8 + drivers Win8.1 + Win10
RKBatchTool for firmware 1.7.1.1 + driversAttached fileU30GT_rkbt_1.7.7z(387.48 KB)

RKBatchTool for firmware 1.5 + drivers:Attached fileU30GT_RKBatchTool.7z(378.28 KB)

RKBatchTool for firmware 1.5 + drivers (Russian, thanks to zdorovtsev70):Attached fileU30GT_RKBatchTool_RUS_by_zdorovtsev70.7z(369.56 KB)

HiSuite - Manager for connecting our device to a computer and working with files (thank you to uv. nakme for checking the operation on U30GT).

Firmware
Official firmware
New firmware versions can always be viewed at official website of the manufacturer .
for revision w
v1.10 (from 2012-08-24)
download:off.site, mirror 1, mirror 2.

for revision H
Important note: When switching from ICS 4.0.4 firmware to JB 4.1.1 (and vice versa), sew only using the button <Restore>.
Use the Upgrade button only when installing firmware with the same bootloader version.
JB 4.1.1
V1.11 (from 2012-12-29)
download:off.site, Mirror on narod.ru, Mirror 2

v1.05 Win8 UI (from 2012-12-13)
download:off.site, mirror on narod.ru.
FirmwareAndroid interface v1.10 and v1.05 interface Win8 UI identical, the difference is only in the interface (in the appearance of the launcher).
v1.10 (from 2012-11-30)
download:off.site, mirror on narod.ru.

v1.09 (from 2012-11-21)
download:off.site, mirror on narod.ru.

ICS 4.0.4
v1.04 Win8 interface (from 2012-10-16)
download:off.site, mirror.
v1.03 (from 2012-09-27)
download:off.site, mirror.
FirmwareAndroid interface v1.03 and Win8 interface v1.04 identical, the difference is only in the interface (in the appearance of the launcher).


for revision hs
v1.01 (from 2013-02-25)
download:off.site, mirror 1, mirror 2.

for iconBIT NetTAB Thor


Modified / custom firmware | Neofits. firmware |
KK 4.4.x

JB 4.1.1
When switching from ICS 4.0.4 firmware to JB 4.1.1 (and vice versa), using the Rockchip Batch Tool v1.5, sew using the button only<Restore>.

Modified firmware on CUBE u30gt-H on the basis Supersport EEPROM replacement touchscreen instead of native 101022-01a-v1 (the controller Focaltech FT5606) on the touch screen version of u30gt2 - 101075-01A-V1 (Goodix GT928 on the controller). Post with a description and links.

Modified firmware for CUBE U30GT-HSmade on the basis of U30GT-HS_v1.01_20130225 (JB 4.1.1) from kasty-cube .
Description.

Cleaned firmware and modified firmware for CUBE U30GT-Hmade on the basis of U30GT-HS_v1.01_20130225 (JB 4.1.1) from eserguei .
Description and download link.

ImaSoft firmware

Decontaminated V3.1 (01/27/13)
Decontaminate JB V3.1 (OS 4.1 JB) 01/27/2013 For revisions "H" and "W" (we take only our basis). A source.
The firmware is based on the official firmware version for the PIPO tablet, with additional performance improvements.
Installation only through CWM!Download firmware .
How to install Decontaminate.
You must have a flashing boot.img flashing (6.0.2.7)
Put on root of external SdCard
In CWM wipe data / factory reset
In advanced menu wipe dalvik cache
From main menu select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 10 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

The base (Base) for the firmware is the same CWM:
Installation if you already have a different version of ClockWorkMod
Download CWM for your tablethere
Put on root of external SdCard
In CWM select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 2 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

Installation with RKAndroidTool
Shutdown your tablet
Download CWM for your tablethere
Unzip to your desktop
Run RKAndroidtool.exe from the folder
Enter flashmode on your tablet and insert usb cable.
Click flash ROM
When complete it will boot into CWM
select reboot system now.

Infected JB V4.0 (1/27/13)
Infected JB V4.0 (1/27/13) For revisions "H" and "W" (we take only our basis). A source.
The firmware is based on the official version of the firmware CUBE U30GT v.1.11.Download .
How to install Infected:
You must have a flashing boot.img flashing (6.0.2.7)
Put on root of external SdCard
In CWM wipe data / factory reset
In advanced menu wipe dalvik cache
From main menu select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 10 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

The base (Base) for the firmware is the same CWM:
Installation if you already have a different version of ClockWorkMod
Download CWM for your tablethere
Put on root of external SdCard
In CWM select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 2 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

Installation with RKAndroidTool
Shutdown your tablet
Download CWM for your tablethere
Unzip to your desktop
Run RKAndroidtool.exe from the folder
Enter flashmode on your tablet and insert usb cable.
Click flash ROM
When complete it will boot into CWM
select reboot system now.


Firmware for Cube U30GT H 1.11 900 supersport ROM
Description Download

The modified firmware for U30GT-H is made on the basis of U30GT-H_V1.11_20121229 (JB 4.1.1) from eserguei .
Description and download link.

Clean firmware for U30GT-H 1.11 from kasty-cube
Original onarctablet.com, mirror on narod.ru

The cleaned firmware for U30GT-H is made on the basis of U30GT-H_v1.10_20121130 (JB 4.1.1) from Andrey_GAV
Description and download link

The cleaned firmware for U30GT-H is made on the basis of U30GT-H_v1.10_20121130 + 2GB for programs.from eserguei .
Description and download link.

The firmware for U30GT-H is made on the basis of U30GT-H_v1.10_20121130 + root + 2GB for programs.from feriross .
Description and download link.

Decontaminate JB V3.0 (OS 4.1 JB) dated 11.23.2012 For revisions “H” and “W” we only take our base). A source.
The firmware is based on the official version of the PIPO tablet with additional performance improvements.
Installation only through CWM!Download firmware . The base (Base) for the firmware is the same CWM: Download

Infected JB V3.0 (12/07/12) (OS 4.1 JB) For revisions “H” and “W” we only take our base). A source.
The firmware is based on the official firmware version 1.10.Download . The base (Base) for the firmware is the same CWM: Download

ICS 4.0.4
Mods variations from eserguei for firmware 1.04 (ICS 4.0.4 Win8 UI) for U30GT-H.
Based on off-firmwareU30GT-H_v1.04_Win8 UI from 20121016 . Description

From adiksavagemessiahzine.comcleaned firmware 1.03 (ICS 4.0.4) for U30GT-H and 2GB for programs.
Description
Based on off-firmwareU30GT-H_v1.03_Android UI_20120927 .
Changed the section under the application, now it is 2 Gb
Root done
Replaced the market with the latest version
Chinese cut out (seemingly all, cut to the eye)
Default launcherApex launcher(I like the most, smooth and you can set the transparency in the application menu, and not the black background as everywhere else.)
Installed such a boot
http://www.youtube.com/watch?v=fovV36oGspw
In build.prop, the device is defined as samsung galaxy note N7000, if you wish, edit it for yourself.
The default language is Russian
Download , Mirror

Evolution Prime v1 (2GB for programs) (ICS 4.0.4)


Experimental firmware
This section contains experimental firmware, stability and power consumption are not guaranteed. As a rule, they are under development and are not suitable for everyday use.

Oma CM10.1 v1.5 as amended by arkan49

CyanogenMod 12 frommussonero
installation comment and download links.


Firmware archive
Archive of old and not current firmware isin this post


Instructions
Driver installation
If you are going to flash the tablet for the first time, install the driver.
Detailed instructions for installing drivers for the tablet (author eserguei)


Before flashing
1) Usegood cable USB-microUSB, the cable from the kit in most cases fails (although there are rare exceptions). Better to take from the original device (Samsung, Nokia, HTC, etc.)
2) Connect the USB cable toUSB 2.0 port on the motherboard (back side of computer).
3) If you are going to flash for the first time, make sure that you have a tablet revision (CUBE 30GT-W or CUBE 30GT- H ). Flashing the tablet with firmware that does not coincide with the revision of the device, we will get a brick with a probability of 100%!
When connected to a computer, all tablets are defined as a W revision, but this is not an indication of a revision.
Tablet revisions: W and H
The first devices had revision W. At the moment, fresh devices have revision "H". The revision number can be found on the serial number on the back of the tablet (U30GTH 32GB) 1233 ...). Also, the revision "H" and have an OEM version without inscriptions on the back cover and a clone from iconBIT NetTAB THOR.
Attached Image
4) The main firmware for our tablet is firmware from a PC using a cable. Due to the fact that reading from an SD card is possibleSD card firmware is not recommended. Use it only in the case when other methods are impossible (for example, when eliminating the state of "brick").

Instructionon preparation for firmware fromarkan49


Ways to install the firmware
All firmware, which consist of one img file (and this is all stock and many custom ones) are stitched with the help of the Rockchip Batch Tool v1.5.
With all the others (which are not flashed using Rockchip Batch Tool v1.5), the program for the firmware is in the archive.
Firmware firmware standard program Rockchip Batch Tool v1.5
1. Requirements:
RRockchip Batch Tool v1.5 (hereinafter RBT)
Cube U30GT firmware file
Personal computer or laptop / netbook running the Windows operating system (for a PC, it is desirable to have a UPS)
Usb cable

2. Initial Setup
Extract RRockchip Batch Tool v1.5 (hereinafter RBT) from the archive. The software includes the necessary drivers for the device.
Unzip the downloaded firmware image
The path to the folders with the program and firmware should not contain Russian letters and spaces.
Run RBT and select the firmware file (...).
If everything is done correctly, you will see the information in the program window - the current firmware version, Android version, board revision (RK30), etc.

3. Installing device drivers
Turn off the device
Connect to computer.
Press the volume up button, then press the power button (the volume button remains pressed).
When the system sees the new device, release the buttons.
When prompted to install the driver for the device, go to the RBT directory and select the "Drivers" folder and the operating system will install the necessary driver.
After the driver installation for the device is completed, one of the RBT fields should change color from gray to green.

4. Install new firmware
After connecting the tablet, click the "Upgrade" button (in case the bootloader version has not changed).
When switching from ICS 4.0.4 firmware to JB 4.1.1 (and vice versa), sew only using the button<Restore>.
You should see an orange text in the green box describing each step of the device update.
If everything is done correctly, you will see the following message:

********** Upgrade Done Success<% d>Fail<% d>Time<% d>ms **********
Instead of% d will be a number.

If the firmware is in normal mode, the tablet will start to boot. If this does not happen, then simply press the power button and wait for the download.

Addition: If you press not "Upgrade", but "Restore", then additional internal formatting takes place and then the firmware also gets normal.

ATTENTION!
Neither the Cube manufacturer, nor I, are responsible for updating your device with the RRockchip Batch Tool software, i.e. everything you do - you do at your own peril and risk.
If this is possible, always use the built-in firmware update functions (Let's say, custom firmware — no!))) It's much easier and safer!


Instructions for firmware device program RK30AndroidTool 1.35
This utility is present in the 900 Supersport firmware (see Archive with firmware)
The path to the folders with the program and firmware should not contain Russian letters and spaces.
Drivers:
The firmware requires RK30AndroidTool 1.35 (hereinafter RKTool), (in the archive with the Supersport firmware renamed to ROM FLash Tool)
To use it, you need to install the driver RK30
They are present in the archive for Windows 32bit and 64bit
These are the same drivers that RKBatch Tool 1.5 uses.

If the driver is already installed, then everything is ready and you will not have to install it. If not, installation is required.

1) It is better to remove the SD card from the slot before starting the firmware
2) Connect the USB cable to the PC. DO NOT worry if the tablet turns on, it may turn on itself when you connect any of the cables.
3) Make sure the charger is connected! This is very important if the battery is weakly charged (if charged, power is optional)
4) First press and hold the button up sound
5) Now press and hold the power button, without releasing the volume increase button
6) Somewhere in 5 seconds, your computer will declare that “a new device has been found”
7) Winda complains that the driver can not find and may ask to look for them. This is normal. Close all dialog boxes, etc.
6) Open the device manager in the control panel. You should see an unknown device with a yellow question mark. Click on it with the RIGHT button and select "update driver"
7) A window will pop up asking to find the driver on the computer. Click the browse button.
8) On the next screen, click the browse button. A file selection window will open. Now remember where you unpacked the archive. Point to this directory, select the driver subdirectory and select 32bit or 64bit depending on your OS. Now select OS version Win7, etc.
The OK button should be available. Click it. The driver should be installed. If not, start the process from the beginning.

Firmware:
So, the driver is installed, and now we can upload new firmware to the device.
Firmware with ROM Flash Tool is different from Btach 1.5 + update.img.
With this utility you can flash only the main images. Such as Kernel.img, boot.img, etc.

1) Run the RK30AndroidTool 1.35 program (ROM Flash Tool.exe)
2) Settings in config.ini, all img files are entered into the program.
DO NOT CHANGE these settings, otherwise you can get a brick!

Do not play with offset values. Just kill the device.
3) There are 2 ways to enter the tablet into the firmware mode: simple (using this program) and complex (push-button).

1. Using the Flash Tool:
a) Turn on the tablet, insert the USB cable into it.
b) Run the ROM Flash Tool. The line "Found RKAndroid MASS Storage USB" should appear at the bottom
c) Click "Reboot to Flash Mode". After a few seconds, the device will reboot.
d) If the drivers have been installed correctly, the tablet screen will turn black, and the program should now appear at the bottom of the "Found RKAndroid Loader Rock USB"
e) Just in case, close the program and run it again in order to clear its memory (apparently, the cache is meant).
Go to step 4.

2. Using the buttons:
a) Turn off the tablet
b) Press and hold the volume up button
c) Without releasing the volume button, press and hold the Power.
d) After 5 seconds, the computer will inform about the connected device.
e) If the drivers were installed correctly, the tablet screen will turn black, and the program should now appear at the bottom of the "Found RKAndroid Loader Rock USB"
Go to step 4.

4) Before flashing, you need to clear the internal memory. Click Erase NAND (IDB)
Should appear "Doing Lower Level Format, Total (16384)"
(I hope I understood correctly here) IMPORTANT! in the Current line should be counted digits to 16384, and the operation will be completed.
If the numbers are not counting (sometimes), restart the Flash tool and click Erase again.
If the numbers do not run anyway, close the program, reboot the tablet into firmware mode again and try again.

5) It's time to go. Click "Flash ROM" and let the program do its work.
The operation will take several minutes. Upon completion, the tablet will reboot itself.

FIRST DOWNLOAD!
The first download will take some time.
Further, the tablet may be in recovery. Just press the power button and boot into the OS.


Tablet firmware via recovery from SD card
Use this way of flashingonly as a last resort , eg for scratching .

1) Make sure the tablet is fully charged. In the recovery there is a recommendation to flash the tablet with the power connected.
2) Download the firmware and save it to your desktop.
3) Extract the .img file
4) You will need to copy it to your desktop and rename it to update.img
5) Save update.img to the root directory on a microSD memory card
6) Insert the microSD card in the off tablet
7) Press and hold the volume up button and the power button until the logo appears. Release both buttons. The launch of the update system happens and just when the map is installed with update.img (I did not check it myself). Not always there is a clear triggering of a combination of buttons to call up the recovery menu, so you will probably have to play around with them.
8) The Android logo with a red triangle will appear! Pressing the volume and power up keys again brings up the recovery menu.
9) Use the volume key to select rkimage update from sdcard (last menu line), then press the power button to select it.
10) Firmware update will be available.

At the end of the firmware, the recovery menu will reappear. Choose a reboot tablet. All firmware upgrades completed.

For those who are stitching from the card (in any way) - after the update.img file has been dropped onto the card, check its hash sum (for example, md5), compare it with that on the PC. To be sure that the file was discarded intact (right on the tablet md5 can read, for example, root explorer). (thanks to JustACat)



Removing the tablet from the state of "brick" (splicing)
Cases to get a completely non-working device due to unsuccessful firmware has not yet been. There is always a way to “scatter” with disassembling and closing the contacts on the device board.

There are several types of "bricks":
- the tablet turns on and comes to standard recovery (picture of a robot with an exclamation mark);
- black screen and does not turn on.

To begin, turn off the tablet, even if it is turned off: keep the button<on>more than 10s
If you get to the standard recovery (a robot with an exclamation mark), then it will probably save the firmware from the SD card(see firmware instructions). To do this, when a robot with an exclamation point appears on the screen, we enter rekoveri (click<on>, and without releasing it,<gr top>. let go<gr top>let go<on>) and flashing from the SD card (see instructions).
Try different firmware. remove and install the card back, check the possibility of firmware, and so several times. Try to boot into the recovery with the installed card. I got it from the third or fourth attempt. Try, it will not be worse.

We connect the tablet to the computer and turn it on in the firmware mode (hold<gr +>and<on>) at the same time in the RBT program we see whether the "green square" appeared. If so, then we flash it in the usual way or with the help of the RK Android Tool.
If the device is not detected in firmware mode, then disassemble and use the following instructions.

The first way to scratch (thanks for the JustACat translation). Another option with contact closure .

The second way to scratch
Suitable for the case when the tablet is loaded only for native recovery mode.
Or after the restoration of a brick in the first way with the help of RBT, an error occurs: "Error waiting for the bootloader to start"
1) Connect to a computer and run RBT (or run RKAndroidTools and watch the device connection status below)
2) Disassemble and close the contacts from the first method and press<on>
3) Get the blue square in RBT (or the status of the connected device in RKAndroidTools)
4) Close RBT if started or use RKAndroidTools
5) Flash the firmware using RKAndroidTools and be sure to flash this very bootloader (for example, the Supersport firmware - everything is in it by checking the bootloader firmware)
6) Well, then flash the necessary firmware using the usual method.


Recovery / Root
CWM recovery and TWRP
CWM recovery for our tablet is recommended to install only with the kernel and firmware on which they are tested and it is known that they will work normally.
Utility from ImaSoft for firmwareCWM recovery and TWRP for # 52, # 302 and # 256 cores.

ROOT privileges
Before you run the utility to get ROOT, make sure:
1. The tablet is connected to the PC.
2. Settings - For developers - enabled USB debugging .
If not previously installedADB driversthen install them.
3. Settings - Security - included unknown sources .

Method for obtaining ROOT for firmware 1.09, 1.10, 1.11.

ROOT for three reboots
1. Connect the tablet to the PC.
2. Go toSettings - For developers - turn on the tablet USB debugging .
If not previously installedADB driversthen install them.
3. Settings - Security - turn on unknown sources .
4. Unpack the archiveROOT. The path to the folder should not contain spaces and Russian letters. Run the file called run me.bat.
5. Further, all prompts will be on the screen: press any key. Wait until the tablet reboots and displays the unlock screen. press any key. the tablet will reboot again. wait for the download. press any key. the tablet will reboot again. wait for the download. root received.
video


ZhuoDaShi-2.2.9-setup.exefor getting root on the latest stock firmware (thanks to zdorovtsev70 for checking work and info) Instructions:
If you are already ADB wood, everything is very simple (or put the driver on the old instructions in the header), connect the tablet with the included USB debugging and MTP. Run a program (with administrator rights) on its screen displays our cube. At the bottom left is a link that says ROOT, initially red. Click on it, opens another window, where a large ROOT bottom right button. Hit and dozhidvaemsya end of the process. The process will be established what the Chinese prog and SuperSU. If you go back to the first screen to see a program that the link on the left is green. Reboot and forth, make a Chinese junk.

ZhuoDaShi and instructions with picturesfrom the next topic.

One moreROOT production method.

One moreROOT production method.

How to check if there is a root?
Start Titanium backup, it will report the presence of root or will suggest to correct, if root is not complete.


miscellanea
Bootanimation Compilation for our tablet.
useful links
Official sitewww.51cube.comwith firmware.
Forumwww.flashmyandroid.com, section about firmware Infected, Decontaminate.
Forumwww.freaktab.com- firmware from 900supersport.

Useful links for romodels
Descriptionhow to edit the firmware.
A set of utilities for editing firmware. Allows you to disassemble the IMG firmware image and manually make changes to the system section (remove unnecessary, add the necessary programs), and again pack it into the IMG file for the firmware. Utility for rebuilding boot.img or recovery.img.Merged version.
Firmware devices on the Rockchip 3066 platform (rk3066)


F.A.Q. Answers to most questions asked in the topic
What is the difference between H and W versions of the tablet and firmware?
The letters after U30GT indicate only differences in production lines or tablets with different components. They have no differences in function and quality.
Firmware differ only in bootloader, they also have no differences in functions and quality.

How to enter native recovery
To enter native recovery:
- turn off the tablet;
- hold and hold<group +>
- turn on the charge and wait until the logo appears, how to release the logo<group +>(you can then pull out the charge)
- a robot will appear with an exclamation mark, press and hold<on>to push<group +>let go<group +>. let go<on>.
- all entered into the recovery, moving through the menu with the volume keys, the choice - the power key.
instruction fromAndrey_GAV

WiFi does not turn on
If WiFi does not turn onsee recommendationsfromVooDooX .

Gameloft game compatibility
We change build.prop for compatibility with gameplay games.
Root required
Use Rutexplorer or another file manager with root rights, open build.prop in / system /.

ro.product.model = U30GT-W
ro.product.brand = rk30sdk
ro.product.name = rk30sdk
ro.product.device = rk30sdk

Change the values ​​above to these:

ro.product.model = SGH-T989
ro.product.brand = samsung
ro.product.name = SGH-T989
ro.product.device = SGH-T989

or these:
ro.product.model = GT-N7000
ro.product.brand = samsung
ro.product.name = GT-N7000
ro.product.device = GT-N7000

either change
ro.build.fingerprint = samsung / GT-N7000 / GT-N7000 and leave the rest as it is.

How to make the status bar to hide?
To putHidebar 1.5(thanks to Alexxsh1974)

Does Flash work on Android 4.1 JB and can I install it?
In the stock firmware and most mods for the adobe flash to work, you need to run the built-in Browser once, it will install flash support. It is also worth making sure that your browser version supports flash.
Detailed instructions with xda-developers:how to install flash on 4.1(thanks to elias-740)

Has anyone been able to put Chainfire 3D on our device (Android 4.1)?
Kettle 4.1 does not go under any circumstances. It is necessary to wait for the program update under Jelly bean, it will not be possible to launch it in any other way. (thanks artwen)

I downloaded the firmware, when I unpacked the error or I can not unpack it
Download the firmware file again. Or,download and install fresh 7zip


Farrowing screenshots
Attached Image

[attachment = "2361406: 02.jpg"]
[attachment = "2324582: 01.jpg"]


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 19.06.18, 08:48
Reason for editing: RKBatchTool v.1.8 + Win8.1 + Win10 drivers



Rep: (2)
Now the error is writing on the device test, someone was right? What will we do? not sewn - error on the test device, should I disconnect the cable or something like that, because at the moment when you start tulzy still burns green square, then suddenly lights up.



Rep: (320)
I would recommend, first sew the latest the drain and then Eve (Evolution Prime).
And I would recommend to sew on RKBT drain firmware, rather than the translated version of the cap ...
No, I understand that their mother tongue all the relatives - even though it is not clear how, then, his hometown fans manage to make so many mistakes when writing ... But what is there to translate anything at all? One button "Upgrade"? .. zdorovtsev70, no offense, I know that you tried and translated, for you it certainly thank you!
Well, that certainly - to sew on an SD card (though in fact and SD cards are bad).
In general, in spherical sewing conditions and full vacuum. Joking aside, but as long as someone has not found a way to 100% raskirpichivaniya better interruptedsdo than Nedoboysdo ...
Of course this is again just my speculation ...

Averus, It was already in the room: here and here .
About further developments in the subject read ...

Post has been editedJustACat - 05.07.12, 16:22



Rep: (54)
Averus,
herelink
or like this:


By the way, I would also advise using proshivalshik folder with the latest firmware drain, although he shilsya translated version several times. I can lay out and log.


Post has been editedzdorovtsev70 - 05.07.12, 17:04



Rep: (2)
I summarize:
after attempting the firmware to 1.0 drain on Evolyushin I got a brick, I think this is due to the fact that they are collected on the assembly to the W, and I H, while shaking Evolyushin for H (is written based on 1.06, but its nature is not for H )
rekoveri to go did not work until filled update.img file on the card, filled firmware 1.02, then I have nothing nebylo as shown in this video
http://www.youtube.com/watch?v=HCUWQwXVWUQ...eature=youtu.be
I just showed up lying droid and a couple of minutes the plate was loaded with all my prog and games, stitching in the properties of 1.0 (on a card filled 1.02)

Post has been editedAverus - 05.07.12, 17:26



Rep: (2)
Now successfully installed with vindy64, firmware from Panda (though it is not written that for H)http://pandawillforum.com/showthread.php?1...-U30GT-Firmware
"
Pandawill Customized Cube U30GT includes both W and H version, but they come without the series number like Cube's.If you flash the wrong version, that will not cause the tablet crash. So please try H version first, if it is not OK, please try W then.
"

http://minus.com/mbnenqwXvl
Startup logo Pandavas

the first time when I got a brick on Evolyuschin Process stops on time and error, the second time I turned Comodo firewall (even though he had to ask, supposedly to let the network or not), and the process is not a stopper for an instant, noticed in the log Downloading, t. e. possibly firewall interfere with updating Windows.


PS: firmware 1.02 on pandas, says that I have a tablet model: S13 in line Model number (default firmware English) stokavaya writes - Model: U30GT-H
PS2: panda verezali all Chinese prog

Post has been editedAverus - 05.07.12, 17:44



Rep: (54)
Averus, the impression that you have nothing at all sewed, but simply rebutnulsya tablet.



Rep: (2)
zdorovtsev70 @ 05.07.2012, 17:37*
Averus, the impression that you have nothing at all sewed, but simply rebutnulsya tablet.

there is an impression, but I clearly vidil 2-3 minutes lying droid and pressed two buttons and no files on the card, he did not run, and the file was 1.02 which I then put (Panda)



Rep: (27)
Averus, I got the H version. Evolution Prime v1 installed for H audit by this link through Russian flasher on Win7 x64. No problems. Then he flashed to the latest official Land.
Rekaveri about fashion - I have it too, somehow tight pondered a moment ... probably lay a droid, I poked three buttons in a row, and at some point the menu opens =)

Post has been editedBlacksnow - 05.07.12, 18:30



Rep: (55)
Averus @ 05.07.2012, 18:37*
PS: firmware 1.02 on pandas, says that I have a tablet model: S13

then how would they send all railway version of H ?, 1.02 times just under the H version byla.hotya realized that now with the tablet on the panda can not care any place, and H and W.
We finished the bootloader?

Post has been editedvenz0ja - 05.07.12, 18:53



Rep: (54)
Averus @ 05.07.2012, 19:52*
vidil 2-3 minutes lying droid and pressed two buttons and no files on the card, he did not run, and the file was 1.02 which I then put (Panda)

BlackSnow @ 05.07.2012, 20:29*
Rekaveri about fashion - I have it too, somehow tight pondered a moment ... probably lay a droid, I poked three buttons in a row, and at some point the menu opens =)

Indeed, the effect of fuzzy keys, sometimes you can not tell from what combination it works. But after entering the menu, I had to continue to work well. After lying android gormkost + food and access to rekaveri menu. And this is possible without the file to make the map.

Posted 05-07-2012, 20:06:

venz0ja @ 05.07.2012, 20:50*
Now with the tablet on the panda can not care any place, and H and W.

So let Panda and try it.



Rep: (2)
Did someone say that evolyushin better drain? is it worth risking my reinsertion 1.02 panda ...



Rep: (54)
Averus, the main difference between Ruth rights and the absence of unnecessary Chinese prog. There's still talked about improving the performance of the battery consumption of the wafer, but a clear advantage not noticed. True to the effluent long held, sews them to new versions of Eve.



Rep: (2)
zdorovtsev70 @ 05.07.2012, 20:30*
Averus, the main difference between Ruth rights and the absence of unnecessary Chinese prog. There's still talked about improving the performance of the battery consumption of the wafer, but a clear advantage not noticed. True to the effluent long held, sews them to new versions of Eve.

Thank you, sit on the firmware of the panda, wifi repaired, cut the excess.



Rep: (9)
Averus @ 05.07.2012, 20:46*
Thank you, sit on the firmware of the panda, wifi repaired, cut the excess.

Firmware from the panda is no different from the drain in addition to the logo when booting

Post has been editeddosha25 - 05.07.12, 22:01



Rep: (320)
Guys, how Market Fix? It's the same AEs !!! ^^ I understand that it is possible, in general, any program and sideload'nut, but from convenience store because it is more convenient - no? :)
Actually funny: people are sewn first, and then start to think - why would they actually need ... :) Hmm ...



Rep: (174)
JustACat @ 05.07.2012, 20:06*
but because of the convenience store is more convenient - no?

NopeApp & Gamesavagemessiahzine.comour everything! -)



Rep: (0)
Sews his U30GT H on the official. 1.02 of instructions (win 7 x64), then because of problems with obtaining root reflash on evo 1.4.
Like all works. Games with the Market are set without any problems (changed bild.prop)



Rep: (2)
JustACat @ 06.07.2012, 03:06*
Actually funny: people are sewn first, and then start to think - why would they actually need ... :) Hmm ...

it is not quite so obvious to 1.0 transition.


Posted 06-07-2012, 11:38:

dimahigh @ 06.07.2012, 11:00*
(Changed bild.prop)

I do not understand what exactly are the benefits? can be an example?



Rep: (204)
Averus @ 06.07.2012, 11:38*
I do not understand what exactly are the benefits? can be an example?

This gives more software in the store when the shaking from the cash games, some look APK to your device (it is through bild.prop, and give him a cache) and if Planche will be determined by such Cube30GT (although I do not know how devaysom seems cube initially), then there is a big chance that the APC says that this version is not compatible with your device, but if you substitute so that the cube represents samsung galaxy note (identical resolution, GPU, too), then all should be well. Something like this.



Rep: (174)
Averus @ 06.07.2012, 09:38*
I do not understand what exactly are the benefits? can be an example?

In the header, the instructions there:
Change bild.prop for compatibility with games geymlofta:


Full version    

Help     rules

Time is now: 16/05/20, 7:47