> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


447 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Cube U30GT - Firmware
eserguei
Message#1
11.06.12, 16:45
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 764
Check in: 07.11.10
Xiaomi Redmi Note 5 4/64

Reputation:-  112  +

Cube U30GT - Firmware
PictureCube U30GT, -W, -H, -HS; iconBIT NetTAB Thor; Starway Andromeda S930; MyTab U30GT2; SHIRU Shogun 10 16GB; Mediacom SmartPad 102 s2
Description | Discussion | Purchase | Accessories and Peripherals | Marriage and Repair | Games | Firmware

Important information
ModelsCube U30GT-M(mini), �U30GT1(U30GTC4), U30GT2are discussed in the relevant topics.
ModelsIconbit NetTAB ThorLE, Iconbit NetTAB ThorXIt has nothing to do with Iconbit NetTAB Thor, or with Cube U30GT.

If you purchased a tablet recently and in this thread for the first time -take the time to flash the tablet.
Before installing a new firmware, read this topic at least a week.
Remember, an error with the firmware can cause the tablet to be turned up.

Drivers and Utilities
RK_DriverAssitant -Drivers for Win7 and Win8. Installing drivers for firmware on Win8.1.
RKBatchTool v.1.8 + drivers Win8.1 + Win10
RKBatchTool for firmware 1.7.1.1 + driversAttached fileU30GT_rkbt_1.7.7z(387.48 KB)

RKBatchTool for firmware 1.5 + drivers:Attached fileU30GT_RKBatchTool.7z(378.28 KB)

RKBatchTool for firmware 1.5 + drivers (Russian, thanks to zdorovtsev70):Attached fileU30GT_RKBatchTool_RUS_by_zdorovtsev70.7z(369.56 KB)

HiSuite- Manager for connecting our device to a computer and working with files (thank you to uv. nakme for checking the operation on U30GT).

Firmware
Official firmware
New firmware versions can always be viewed atofficial website of the manufacturer.
for revision w
v1.10(from 2012-08-24)
download:off.site, mirror 1, mirror 2.

for revision H
Important note:When switching from ICS 4.0.4 firmware to JB 4.1.1 (and vice versa), sew only using the button<Restore>.
Use the Upgrade button only when installing firmware with the same bootloader version.
JB 4.1.1
V1.11(from 2012-12-29)
download:off.site, Mirror on narod.ru, Mirror 2

v1.05 Win8 UI(from 2012-12-13)
download:off.site, mirror on narod.ru.
FirmwareAndroid interface v1.10andv1.05 interface Win8 UIidentical, the difference is only in the interface (in the appearance of the launcher).
v1.10(from 2012-11-30)
download:off.site, mirror on narod.ru.

v1.09(from 2012-11-21)
download:off.site, mirror on narod.ru.

ICS 4.0.4
v1.04Win8 interface (from 2012-10-16)
download:off.site, mirror.
v1.03(from 2012-09-27)
download:off.site, mirror.
FirmwareAndroid interface v1.03andWin8 interface v1.04identical, the difference is only in the interface (in the appearance of the launcher).


for revision hs
v1.01(from 2013-02-25)
download:off.site, mirror 1, mirror 2.

for iconBIT NetTAB Thor


Modified / custom firmware | Neofits. firmware |
KK 4.4.x

JB 4.1.1
When switching from ICS 4.0.4 firmware to JB 4.1.1 (and vice versa), using the Rockchip Batch Tool v1.5, sew using the button only<Restore>.

���������������� �������� �� CUBE u30gt-H �� ������ �������� ���������� � ������� ��������� ������ ������� 101022-01a-v1 (�� ����������� Focaltech FT5606) �� ������ ��������� �� u30gt2 - 101075-01A-V1 (�� ����������� Goodix GT928). download

Post with a description and links.

Modified firmware for CUBE U30GT-HSmade on the basis of U30GT-HS_v1.01_20130225 (JB 4.1.1)fromkasty-cube.
Description.

Cleaned firmware and modified firmware for CUBE U30GT-Hmade on the basis of U30GT-HS_v1.01_20130225 (JB 4.1.1)fromeserguei.
Description and download link.

ImaSoft firmware

Decontaminated V3.1 (01/27/13)
Decontaminate JB V3.1 (OS 4.1 JB) 01/27/2013For revisions "H" and "W" (we take only our basis).A source.
The firmware is based on the official firmware version for the PIPO tablet, with additional performance improvements.
Installation only through CWM!Download firmware.
How to install Decontaminate.
You must have a flashing boot.img flashing (6.0.2.7)
Put on root of external SdCard
In CWM wipe data / factory reset
In advanced menu wipe dalvik cache
From main menu select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 10 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

The base (Base) for the firmware is the same CWM:
Installation if you already have a different version of ClockWorkMod
Download CWM for your tablethere
Put on root of external SdCard
In CWM select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 2 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

Installation with RKAndroidTool
Shutdown your tablet
Download CWM for your tablethere
Unzip to your desktop
Run RKAndroidtool.exe from the folder
Enter flashmode on your tablet and insert usb cable.
Click flash ROM
When complete it will boot into CWM
select reboot system now.

Infected JB V4.0 (1/27/13)
Infected JB V4.0 (1/27/13)For revisions "H" and "W" (we take only our basis).A source.
The firmware is based on the official version of the firmware CUBE U30GT v.1.11.Download.
How to install Infected:
You must have a flashing boot.img flashing (6.0.2.7)
Put on root of external SdCard
In CWM wipe data / factory reset
In advanced menu wipe dalvik cache
From main menu select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 10 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

The base (Base) for the firmware is the same CWM:
Installation if you already have a different version of ClockWorkMod
Download CWM for your tablethere
Put on root of external SdCard
In CWM select install zip from sdcard
Select choose zip from external sdcard
Process takes ~ 2 minutes
It will not be complete until it returns to the menu ... patience
When returned to menu select go back
select reboot system now.

Installation with RKAndroidTool
Shutdown your tablet
Download CWM for your tablethere
Unzip to your desktop
Run RKAndroidtool.exe from the folder
Enter flashmode on your tablet and insert usb cable.
Click flash ROM
When complete it will boot into CWM
select reboot system now.


Firmware for Cube U30GT H 1.11 900 supersport ROM
Description Download

The modified firmware for U30GT-H is made on the basis of U30GT-H_V1.11_20121229 (JB 4.1.1)fromeserguei.
Description and download link.

Clean firmware for U30GT-H 1.11fromkasty-cube
Original onarctablet.com, mirror on narod.ru

The cleaned firmware for U30GT-H is made on the basis of U30GT-H_v1.10_20121130 (JB 4.1.1)fromAndrey_GAV
Description and download link

The cleaned firmware for U30GT-H is made on the basis of U30GT-H_v1.10_20121130+ 2GB for programs.fromeserguei.
Description and download link.

The firmware for U30GT-H is made on the basis of U30GT-H_v1.10_20121130+ root + 2GB for programs.fromferiross.
Description and download link.

Decontaminate JB V3.0 (OS 4.1 JB) dated 11.23.2012For revisions “H” and “W” we only take our base).A source.
The firmware is based on the official version of the PIPO tablet with additional performance improvements.
Installation only through CWM!Download firmware. The base (Base) for the firmware is the same CWM:Download

Infected JB V3.0 (12/07/12) (OS 4.1 JB)For revisions “H” and “W” we only take our base).A source.
The firmware is based on the official firmware version 1.10.Download. The base (Base) for the firmware is the same CWM:Download

ICS 4.0.4
Mods variations from eserguei for firmware 1.04 (ICS 4.0.4 Win8 UI)for U30GT-H.
Based on off-firmwareU30GT-H_v1.04_Win8 UI from 20121016. Description

From adiksavagemessiahzine.comcleaned firmware 1.03 (ICS 4.0.4)for U30GT-H and 2GB for programs.
Description
Based on off-firmwareU30GT-H_v1.03_Android UI_20120927.
Changed the section under the application, now it is 2 Gb
Root done
Replaced the market with the latest version
Chinese cut out (seemingly all, cut to the eye)
Default launcherApex launcher(I like the most, smooth and you can set the transparency in the application menu, and not the black background as everywhere else.)
Installed such a boot
http://www.youtube.com/watch?v=fovV36oGspw
In build.prop, the device is defined as samsung galaxy note N7000, if you wish, edit it for yourself.
The default language is Russian
Download, Mirror

Evolution Prime v1 (2GB for programs) (ICS 4.0.4)


Experimental firmware
This section contains experimental firmware, stability and power consumption are not guaranteed. As a rule, they are under development and are not suitable for everyday use.

Oma CM10.1 v1.5 as amended by arkan49

CyanogenMod 12 frommussonero
installation comment and download links.


Firmware archive
Archive of old and not current firmware isin this post


Instructions
Driver installation
If you are going to flash the tablet for the first time, install the driver.
Detailed instructions for installing drivers for the tablet (authoreserguei)


Before flashing
1) Usegood cableUSB-microUSB, the cable from the kit in most cases fails (although there are rare exceptions). Better to take from the original device (Samsung, Nokia, HTC, etc.)
2) Connect the USB cable toUSB 2.0 port on the motherboard(back side of computer).
3) If you are going to flash for the first time, make sure that you have a tablet revision (CUBE 30GT-Wor CUBE 30GT-H). Flashing the tablet with firmware that does not coincide with the revision of the device, we will get a brick with a probability of 100%!
When connected to a computer, all tablets are defined as a W revision, but this is not an indication of a revision.
Tablet revisions: W and H
The first devices had revision W. At the moment, fresh devices have revision "H". The revision number can be found on the serial number on the back of the tablet (U30GTH32GB) 1233 ...). Also, the revision "H" and have an OEM version without inscriptions on the back cover and a clone from iconBIT NetTAB THOR.
Attached Image
4) The main firmware for our tablet is firmware from a PC using a cable. Due to the fact that reading from an SD card is possibleSD card firmware is not recommended.Use it only in the case when other methods are impossible (for example, when eliminating the state of "brick").

Instructionon preparation for firmware fromarkan49


Ways to install the firmware
All firmware, which consist of one img file (and this is all stock and many custom ones) are stitched with the help of the Rockchip Batch Tool v1.5.
With all the others (which are not flashed using Rockchip Batch Tool v1.5), the program for the firmware is in the archive.
Firmware firmware standard program Rockchip Batch Tool v1.5
1. Requirements:
RRockchip Batch Tool v1.5 (hereinafter RBT)
Cube U30GT firmware file
Personal computer or laptop / netbook running the Windows operating system (for a PC, it is desirable to have a UPS)
Usb cable

2. Initial Setup
Extract RRockchip Batch Tool v1.5 (hereinafter RBT) from the archive. The software includes the necessary drivers for the device.
Unzip the downloaded firmware image
The path to the folders with the program and firmware should not contain Russian letters and spaces.
Run RBT and select the firmware file (...).
If everything is done correctly, you will see the information in the program window - the current firmware version, Android version, board revision (RK30), etc.

3. Installing device drivers
Turn off the device
Connect to computer.
Press the volume up button, then press the power button (the volume button remains pressed).
When the system sees the new device, release the buttons.
When prompted to install the driver for the device, go to the RBT directory and select the "Drivers" folder and the operating system will install the necessary driver.
After the driver installation for the device is completed, one of the RBT fields should change color from gray to green.

4. Install new firmware
After connecting the tablet, click the "Upgrade" button (in case the bootloader version has not changed).
When switching from ICS 4.0.4 firmware to JB 4.1.1 (and vice versa), sew only using the button<Restore>.
You should see an orange text in the green box describing each step of the device update.
If everything is done correctly, you will see the following message:

********** Upgrade Done Success<% d>Fail<% d>Time<% d>ms **********
Instead of% d will be a number.

If the firmware is in normal mode, the tablet will start to boot. If this does not happen, then simply press the power button and wait for the download.

Addition: If you press not "Upgrade", but "Restore", then additional internal formatting takes place and then the firmware also gets normal.

ATTENTION!
Neither the Cube manufacturer, nor I, are responsible for updating your device with the RRockchip Batch Tool software, i.e. everything you do - you do at your own peril and risk.
If this is possible, always use the built-in firmware update functions (Let's say, custom firmware — no!))) It's much easier and safer!


Instructions for firmware device program RK30AndroidTool 1.35
This utility is present in the 900 Supersport firmware (see Archive with firmware)
The path to the folders with the program and firmware should not contain Russian letters and spaces.
Drivers:
The firmware requires RK30AndroidTool 1.35 (hereinafter RKTool), (in the archive with the Supersport firmware renamed to ROM FLash Tool)
To use it, you need to install the driver RK30
They are present in the archive for Windows 32bit and 64bit
These are the same drivers that RKBatch Tool 1.5 uses.

If the driver is already installed, then everything is ready and you will not have to install it. If not, installation is required.

1) It is better to remove the SD card from the slot before starting the firmware
2) Connect the USB cable to the PC. DO NOT worry if the tablet turns on, it may turn on itself when you connect any of the cables.
3) Make sure the charger is connected! This is very important if the battery is weakly charged (if charged, power is optional)
4) First press and hold the button up sound
5) Now press and hold the power button, without releasing the volume increase button
6) Somewhere in 5 seconds, your computer will declare that “a new device has been found”
7) Winda complains that the driver can not find and may ask to look for them. This is normal. Close all dialog boxes, etc.
6) Open the device manager in the control panel. You should see an unknown device with a yellow question mark. Click on it with the RIGHT button and select "update driver"
7) A window will pop up asking to find the driver on the computer. Click the browse button.
8) On the next screen, click the browse button. A file selection window will open. Now remember where you unpacked the archive. Point to this directory, select the driver subdirectory and select 32bit or 64bit depending on your OS. Now select OS version Win7, etc.
The OK button should be available. Click it. The driver should be installed. If not, start the process from the beginning.

Firmware:
So, the driver is installed, and now we can upload new firmware to the device.
Firmware with ROM Flash Tool is different from Btach 1.5 + update.img.
With this utility you can flash only the main images. Such as Kernel.img, boot.img, etc.

1) Run the RK30AndroidTool 1.35 program (ROM Flash Tool.exe)
2) Settings in config.ini, all img files are entered into the program.
DO NOT CHANGE these settings, otherwise you can get a brick!

Do not play with offset values. Just kill the device.
3) There are 2 ways to enter the tablet into the firmware mode: simple (using this program) and complex (push-button).

1. Using the Flash Tool:
a) Turn on the tablet, insert the USB cable into it.
b) Run the ROM Flash Tool. The line "Found RKAndroid MASS Storage USB" should appear at the bottom
c) Click "Reboot to Flash Mode". After a few seconds, the device will reboot.
d) If the drivers have been installed correctly, the tablet screen will turn black, and the program should now appear at the bottom of the "Found RKAndroid Loader Rock USB"
e) Just in case, close the program and run it again in order to clear its memory (apparently, the cache is meant).
Go to step 4.

2. Using the buttons:
a) Turn off the tablet
b) Press and hold the volume up button
c) Without releasing the volume button, press and hold the Power.
d) After 5 seconds, the computer will inform about the connected device.
e) If the drivers were installed correctly, the tablet screen will turn black, and the program should now appear at the bottom of the "Found RKAndroid Loader Rock USB"
Go to step 4.

4) Before flashing, you need to clear the internal memory. Click Erase NAND (IDB)
Should appear "Doing Lower Level Format, Total (16384)"
(I hope I understood correctly here) IMPORTANT! in the Current line should be counted digits to 16384, and the operation will be completed.
If the numbers are not counting (sometimes), restart the Flash tool and click Erase again.
If the numbers do not run anyway, close the program, reboot the tablet into firmware mode again and try again.

5) It's time to go. Click "Flash ROM" and let the program do its work.
The operation will take several minutes. Upon completion, the tablet will reboot itself.

FIRST DOWNLOAD!
The first download will take some time.
Further, the tablet may be in recovery. Just press the power button and boot into the OS.


Tablet firmware via recovery from SD card
Use this way of flashingonly as a last resort, egfor scratching.

1) Make sure the tablet is fully charged. In the recovery there is a recommendation to flash the tablet with the power connected.
2) Download the firmware and save it to your desktop.
3) Extract the .img file
4) You will need to copy it to your desktop and rename it to update.img
5) Save update.img to the root directory on a microSD memory card
6) Insert the microSD card in the off tablet
7) Press and hold the volume up button and the power button until the logo appears. Release both buttons. The launch of the update system happens and just when the map is installed with update.img (I did not check it myself). Not always there is a clear triggering of a combination of buttons to call up the recovery menu, so you will probably have to play around with them.
8) The Android logo with a red triangle will appear! Pressing the volume and power up keys again brings up the recovery menu.
9) Use the volume key to select rkimage update from sdcard (last menu line), then press the power button to select it.
10) Firmware update will be available.

At the end of the firmware, the recovery menu will reappear. Choose a reboot tablet. All firmware upgrades completed.

For those who are stitching from the card (in any way) - after the update.img file has been dropped onto the card, check its hash sum (for example, md5), compare it with that on the PC. To be sure that the file was discarded intact (right on the tablet md5 can read, for example, root explorer). (thanks to JustACat)



Removing the tablet from the state of "brick" (splicing)
Cases to get a completely non-working device due to unsuccessful firmware has not yet been. There is always a way to “scatter” with disassembling and closing the contacts on the device board.

There are several types of "bricks":
- the tablet turns on and comes to standard recovery (picture of a robot with an exclamation mark);
- black screen and does not turn on.

To begin, turn off the tablet, even if it is turned off: keep the button<on>more than 10s
If you get to the standard recovery (a robot with an exclamation mark), then it will probably save the firmware from the SD card(see firmware instructions). To do this, when a robot with an exclamation point appears on the screen, we enter rekoveri (click<on>, and without releasing it,<gr top>. let go<gr top>let go<on>) and flashing from the SD card (see instructions).
Try different firmware. remove and install the card back, check the possibility of firmware, and so several times. Try to boot into the recovery with the installed card. I got it from the third or fourth attempt. Try, it will not be worse.

We connect the tablet to the computer and turn it on in the firmware mode (hold<gr +>and<on>) at the same time in the RBT program we see whether the "green square" appeared. If so, then we flash it in the usual way or with the help of the RK Android Tool.
If the device is not detected in firmware mode, then disassemble and use the following instructions.

The first way to scratch(thanks for the JustACat translation). Another optionwith contact closure.

The second way to scratch
Suitable for the case when the tablet is loaded only for native recovery mode.
Or after the restoration of a brick in the first way with the help of RBT, an error occurs: "Error waiting for the bootloader to start"
1) Connect to a computer and run RBT (or run RKAndroidTools and watch the device connection status below)
2) Disassemble and close the contacts from the first method and press<on>
3) Get the blue square in RBT (or the status of the connected device in RKAndroidTools)
4) Close RBT if started or use RKAndroidTools
5) Flash the firmware using RKAndroidTools and be sure to flash this very bootloader (for example, the Supersport firmware - everything is in it by checking the bootloader firmware)
6) Well, then flash the necessary firmware using the usual method.


Recovery / Root
CWM recovery and TWRP
CWM recovery for our tablet is recommended to install only with the kernel and firmware on which they are tested and it is known that they will work normally.
Utility from ImaSoft for firmwareCWM recovery and TWRP for # 52, # 302 and # 256 cores.

ROOT privileges
Before you run the utility to get ROOT, make sure:
1. The tablet is connected to the PC.
2. Settings - For developers- enabledUSB debugging.
If not previously installedADB driversthen install them.
3. Settings - Security- includedunknown sources.

Method for obtaining ROOT for firmware 1.09, 1.10, 1.11.

ROOT for three reboots
1. Connect the tablet to the PC.
2. Go toSettings - For developers- turn on the tabletUSB debugging.
If not previously installedADB driversthen install them.
3. Settings - Security- turn onunknown sources.
4. Unpack the archiveROOT. The path to the folder should not contain spaces and Russian letters. Run the file called run me.bat.
5. Further, all prompts will be on the screen: press any key. Wait until the tablet reboots and displays the unlock screen. press any key. the tablet will reboot again. wait for the download. press any key. the tablet will reboot again. wait for the download. root received.
video


ZhuoDaShi-2.2.9-setup.exefor getting root on the latest stock firmware (thanks to zdorovtsev70 for checking work and info) Instructions:
If there is already ADB firewood, then everything is very simple, (or we install the driver according to the old instructions in the header) we connect the tablet with USB and MTP debugging enabled. We launch a program (with the rights of the administrator) On its screen our cube will be displayed. Below on the left there will be a link with the inscription ROOT, initially red. We click on it, another window opens, there is a big ROOT button down there on the right. We press and wait for the end of the process. In the process will be installed some sort of Chinese prog and SuperSU. If you return to the first screen of the program, you will see that the link on the left has turned green. Reboot and go ahead, take out the Chinese garbage.

ZhuoDaShi and instructions with picturesfrom the next topic.

One moreROOT production method.

One moreROOT production method.

How to check if there is a root?
Start Titanium backup, it will report the presence of root or will suggest to correct, if root is not complete.


miscellanea
Bootanimation Compilationfor our tablet.
useful links
Official sitewww.51cube.comwith firmware.
Forumwww.flashmyandroid.com, section about firmware Infected, Decontaminate.
Forumwww.freaktab.com- firmware from 900supersport.

Useful links for romodels
Descriptionhow to edit the firmware.
A set of utilities for editing firmware. Allows you to disassemble the IMG firmware image and manually make changes to the system section (remove unnecessary, add the necessary programs), and again pack it into the IMG file for the firmware. Utility for rebuilding boot.img or recovery.img.Merged version.
Firmware devices on the Rockchip 3066 platform (rk3066)


F.A.Q. Answers to most questions asked in the topic
What is the difference between H and W versions of the tablet and firmware?
The letters after U30GT indicate only differences in production lines or tablets with different components. They have no differences in function and quality.
Firmware differ only in bootloader, they also have no differences in functions and quality.

How to enter native recovery
To enter native recovery:
- turn off the tablet;
- hold and hold<group +>
- turn on the charge and wait until the logo appears, how to release the logo<group +>(you can then pull out the charge)
- a robot will appear with an exclamation mark, press and hold<on>to push<group +>let go<group +>. let go<on>.
- all entered into the recovery, moving through the menu with the volume keys, the choice - the power key.
instruction fromAndrey_GAV

WiFi does not turn on
If WiFi does not turn onsee recommendationsfromVooDooX.

Gameloft game compatibility
We change build.prop for compatibility with gameplay games.
Root required
Use Rutexplorer or another file manager with root rights, open build.prop in / system /.

ro.product.model = U30GT-W
ro.product.brand = rk30sdk
ro.product.name = rk30sdk
ro.product.device = rk30sdk

Change the values ​​above to these:

ro.product.model = SGH-T989
ro.product.brand = samsung
ro.product.name = SGH-T989
ro.product.device = SGH-T989

or these:
ro.product.model = GT-N7000
ro.product.brand = samsung
ro.product.name = GT-N7000
ro.product.device = GT-N7000

either change
ro.build.fingerprint = samsung / GT-N7000 / GT-N7000 and leave the rest as it is.

How to make the status bar to hide?
To putHidebar 1.5(thanks to Alexxsh1974)

Does Flash work on Android 4.1 JB and can I install it?
In the stock firmware and most mods for the adobe flash to work, you need to run the built-in Browser once, it will install flash support. It is also worth making sure that your browser version supports flash.
Detailed instructions with xda-developers:how to install flash on 4.1(thanks to elias-740)

Has anyone been able to put Chainfire 3D on our device (Android 4.1)?
Kettle 4.1 does not go under any circumstances. It is necessary to wait for the program update under Jelly bean, it will not be possible to launch it in any other way. (thanks artwen)

I downloaded the firmware, when I unpacked the error or I can not unpack it
Download the firmware file again. Or,download and install fresh 7zip


Farrowing screenshots
Attached Image

[attachment = "2361406: 02.jpg"]
[attachment = "2324582: 01.jpg"]


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 19.06.18, 08:48
Reason for editing: RKBatchTool v.1.8 + Win8.1 + Win10 drivers
vanessias
Message#2
11.06.12, 20:07
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 51
Check in: 07.05.12
Xiaomi Mi 2

Reputation:-  10  +

zdorovtsev70, Yes please.
Translation of firmware upgrade instructions:
Instructions for updating firmware for Cube U30GT

1. Requirements:

Rockchip Batch Tool v1.5 (works under Windows OS)
Directly the very image of the firmware
USB cable

2. Initial installation

Remove the Batch Tool (further RBT) from the archive (the archive also contains all the necessary drivers!).
Extract the downloaded firmware image.
Run RBT and open the image with it.
If everything went right, you will see that some fields are filled with information (for example, firmware version, android, etc.)


3. Installing drivers on the device

Turn off the device
Press the volume button (either of the two), then press the power button (the volume button remains pressed).
While holding these buttons, connect the device to the computer (using a USB cable).
When the system sees the new device, release the buttons.
When the system asks for drivers, point it to the "Drivers" folder and the driver will be installed.
After successfully completing the procedure, one of the RBT fields will change color from gray to green.

4. Install new firmware

After connecting the device, click the "Upgrade" button.
The green field will change to orange text indicating the firmware of each part of the device.
If done correctly, you will see the following message:

********** Upgrade Done Success<% d>Fail<% d>Time<% d>ms **********
Instead of% d, numbers will be written.

If everything went smoothly, the tablet will automatically turn on. If this does not happen, turn on the tablet manually (by holding the power button).

Attention!
Neither the manufacturer nor the instruction manual is responsible for the consequences of using the Rockchip Batch Tool. If possible, always use the built-in update tools — it's much easier and safer.


Post has been editedvanessias - 11.06.12, 20:22


--------------------
Xiaomi Mi2 ->Yotaphone 2 Y206
System86
Message#3
11.06.12, 20:28
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 247
Check in: 22.05.07

Reputation:-  20  +

Cube U30GT Firmware Upgrade Guide

1. Requirements:
RRockchip Batch Tool v1.5
Cube U30GT firmware file
Personal computer or laptop / netbook running the Windows operating system (for a PC, it is desirable to have a UPS)
Usb cable

2. Initial Setup
Extract RRockchip Batch Tool v1.5 (hereinafter RBT) from the archive. The software includes the necessary drivers for the device.
Unzip the downloaded firmware image
Run RBT and select the firmware file (...).
If everything is done correctly, you will see the information in the program window - the current firmware version, Android version, board revision (RK30), etc.

3. Installing device drivers
Turn off the U30GT
Press any of the volume keys, and then press the power button.
While holding the buttons, connect the cable to the USB connector on the tablet.
As soon as OS Windows detects a new device, release the buttons.
When prompted to install the driver for the device, go to the RBT directory and select the "Drivers" folder and the operating system will install the necessary driver.
After the driver installation for the device is completed, one of the RBT fields should change color from gray to green.

4. Install new firmware
After connecting the tablet, click "Upgrade
You should see an orange text in the green box describing each step of the device update.
If everything is done correctly, you will see the following message:

********** Upgrade Done Success<% d>Fail<% d>Time<% d>ms **********
Of course the% d parts replaced with numbers

If the firmware is in normal mode, the tablet will start to boot. If this does not happen, then simply press the power button and wait for the download.

ATTENTION!
Neither the Cube manufacturer, nor I, are responsible for updating your device with the RRockchip Batch Tool software, i.e. everything you do - you do at your own peril and risk.
If this is possible, always use the built-in firmware update functions (Let's say, custom firmware — no!))) It's much easier and safer!


Something like this)))

Post has been editedSystem86 - 11.06.12, 20:28
S1eepy
Message#4
11.06.12, 23:20
Cool Scenere
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1354
Check in: 01.03.11
Redmi Note 7 4/64

Reputation:-  157  +

emilliys
Answeredin the subject of purchase.

Regarding the evolution, from the proxy - by studying the firmware H and W, they came to the conclusion that they can be compatible as soon as I can - I will check the new version of the evolution on my H version. Fonix asked me to disassemble the device to clarify the filling and compare revisions, but there will definitely not be any disassembly from me, as I have already said.

Post has been editedS1eepy - 12.06.12, 00:19
emilliys
Message#5
11.06.12, 23:35
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 602
Check in: 14.08.08
Asus padfone 2

Reputation:-  32  +

S1eepy @ 06/12/2012, 00:20*
but there will definitely be no disassembly from me, as I have already said.

I do not understand what the problem is, I understand that the tablet is not for itself, but still the disassembly is not so complicated and will not damage the tablet, well, I understand the concerns) if H comes to me (which I hope will not), then I can do everything in detail) but mine I still think like a month, I’m still learning to get


--------------------
Motorola V50>Siemens A55>Alcatel OT 535>Samsung SGH E360>RoverPC P7>Nokia 5530>LG P690>Hightscreen Alpha GT Rev. B>Asus padfone 2 a68>Nokia Lumia 1020>Xiaomi Mi5s
JustACat
Message#6
12.06.12, 10:08
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1075
Check in: 04.03.11
Xiaomi Mi Mix 6/256

Reputation:-  316  +

Here is the translation for the Evolution:
Evolution for Cube U30GT (based on official firmware v 1.06 from Cuba)

Authorship: Cube, Fonix232

Functions / Corrections:
  • Root access
  • System adjustments to extend battery life
  • Fixed keyboard
  • Removed unnecessary
  • English by default
List of changes:

Evolution 1.23:
  • Updated busybox to full (not minimum) version 1.19.4
  • Updated graphics (not entirely clear, it means some pictures or some code related to the work of the graphics subsystem)
  • Integrated several libraries to improve compatibility
  • Now 2GB of memory is reserved for programs.
  • Updated Launcher
Evolution 1.22:
  • Original iron ID
  • WiFi improved slightly (better performance on low latency networks with full compatibility with high latency networks)
  • Added busybox
  • YouTube added
Evolution 1.21:
  • Enabled Forced Video Acceleration
  • Improved image / video quality
  • Improved streaming video
  • Increased dalvik cache
  • Improved compatibility with programs
  • Improved game compatibility
  • Changed the standard bluetooth name to cube U30GT
  • Fixed OOM settings
  • All programs are optimized and zipaligned
  • Added partial amplification of bits in the sound (may improve the sound)
  • Added live wallpaper "Deep sea"
  • Changed the standard homepage in the browser
  • Original Market
Evolution 1.1:
  • Additional system tuning to improve ICS performance
  • Tweaking "build properties" to increase battery life
  • Added "build properties"
  • Removed the application "NTFS"
  • Changed WiFi settings
From the authors: In general, the stock firmware is quite normal, so we did just a few tweaks that Kubovtsy seemed to have missed when they released the firmware.

And, kmk, it is necessary to add a link to the original article on flashmyandroid.com, I did not find the atom ...

Post has been editedJustACat - 12.06.12, 10:10


--------------------
Xiaomi Mi Mix 6/256 (mi-globe 9.5.1.0)
Xiaomi R3G (OpenWrt / LEDE why)
Xiaomi Amazfit bip (1.1.2.05 stock + 3.4.4 Lolex)
zdorovtsev70
Message#7
12.06.12, 10:37
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 943
Check in: 07.12.10
Nokia 6.1 3/32

Reputation:-  52  +

Since I’m waiting until my version N tablet is finally released from Hong Kong, I wanted to ask, someone mentioned a pro ford from 08.06 in the cap, it isn’t in the header, it may be worth adding if it exists of course.

PS
While the essence of the matter tried to add the Russian language in RKBatchTool_1.5. Look who understands, you can add to the header if everything is fine.

Attached files

Attached file________RKBatchTool_1.5.zip(2.84 KB)


Post has been editedzdorovtsev70 - 12.06.12, 11:05
Reason for editing: adding files


--------------------
Cube U30GT-W, Asus Eee PC 1001 PXD, FreeLander PD20 (sold), Aoson ML7, Star A1 (pr), Star N9770 (pr) Zopo ZP950 (pr), Zopo ZP500 + (pr), Zopo ZP200 + 3D, Huawei Honor II 2Gb RAM (sold out), Ecoo E04, Meizu MX2, Xiaomi Redmy 3S
S1eepy
Message#8
12.06.12, 13:19
Cool Scenere
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1354
Check in: 01.03.11
Redmi Note 7 4/64

Reputation:-  157  +

zdorovtsev70
Plus for the translation, I collected everything, put it in the cap.
Stock 08.06 is most likely from June 6th and is :)

I installed the driver today, and checked the tablet firmware on the last stock, everything is ok.
Evolution 1.23 on my H revision presented a black screen, returned to stock ...

Post has been editedS1eepy - 12.06.12, 16:07
S1eepy
Message#9
12.06.12, 22:11
Cool Scenere
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1354
Check in: 01.03.11
Redmi Note 7 4/64

Reputation:-  157  +

zdorovtsev70
The signal is about the same as on other devices on the android, I did not do any tests for Wi-Fi.
Prox still finished his custom mod for H revision, flashed to myself :)
Dmitrii1983
Message#10
18.06.12, 17:23
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 602
Check in: 16.01.12
Dell Streak 10 Pro

Reputation:-  85  +

Fresh of. firmware on Narod.ru:U30GT V1.07 2012.06.18


1, to optimize the Wi-Fi signal;
2, RK3066 pure hardware technically to further optimize the online video playback.
zdorovtsev70
Message#11
18.06.12, 20:03
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 943
Check in: 07.12.10
Nokia 6.1 3/32

Reputation:-  52  +

Dmitrii1983,You need to add that firmware for W-revision.
And here for H-ki, also on the people
U30GT-H_V1.02

The changes are the same - optimization of the Wi-Fi signal and streaming video playback.

Post has been editedzdorovtsev70 - 18.06.12, 20:05


--------------------
Cube U30GT-W, Asus Eee PC 1001 PXD, FreeLander PD20 (sold), Aoson ML7, Star A1 (pr), Star N9770 (pr) Zopo ZP950 (pr), Zopo ZP500 + (pr), Zopo ZP200 + 3D, Huawei Honor II 2Gb RAM (sold out), Ecoo E04, Meizu MX2, Xiaomi Redmy 3S
S1eepy
Message#12
21.06.12, 14:17
Cool Scenere
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1354
Check in: 01.03.11
Redmi Note 7 4/64

Reputation:-  157  +

Update for H & W:
Version: 1.4 | Date: 21/06/2012
Zapravshik
Message#13
21.06.12, 20:51
Experienced
******
[online]

Group: Friendssavagemessiahzine.com
Messages 497
Check in: 17.10.07

Reputation:-  28  +

S1eepy,
I did not wait, I downloaded it myselfTyts(Multiupload)
Correct that the mod is made on the basis of the official 1.07

Post has been editedZapravshik - 21.06.12, 20:52


--------------------
(Ukraine, Kharkov) Xiaomi RN 3 Pro- 2/16, Xiaomi RN5- 4/64
Mini M8S PRO 2/16
S1eepy
Message#14
21.06.12, 21:28
Cool Scenere
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1354
Check in: 01.03.11
Redmi Note 7 4/64

Reputation:-  157  +

@Zapravshik:
Corrected.
The uploaded file (proksovskoy filling) is too large, my repack is 130mb smaller. I did not know that the multi-fruit was back in the ranks :)
Perezal and there:
http://www.multiupload.nl/75AG77GH00
Tonchi_TX
Message#15
23.06.12, 01:39
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 261
Check in: 19.03.10
Xiaomi Mi 8

Reputation:-  0  +

Tell me what is the difference between H and W versions of the tablet and firmware?
S1eepy
Message#16
23.06.12, 22:08
Cool Scenere
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1354
Check in: 01.03.11
Redmi Note 7 4/64

Reputation:-  157  +

Tonchi_TX
The letters after U30GT indicate only differences in production lines or tablets with different components. They have no differences in function and quality.
Firmware differ only in bootloader, they also have no differences in functions and quality.
zdorovtsev70
Message#17
23.06.12, 22:41
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 943
Check in: 07.12.10
Nokia 6.1 3/32

Reputation:-  52  +

Averus,I sewed my own already several times. Tablet W, firmware 1.5 from the store was. Srashu stitched for Evolution 1.4, and the tablet hung on the launch, reaching the desktop. Reboot did not help. I asked again the same thing. I put the factory 1.7, everything is fine, after it 1.4 Evolution went fine. The mod is more pleasant, there are no many Chinese prog and hieroglyphs that even with system Russian, hang here and there. I tried to do the right 1.7 to make the root of the law did not go, maybe because of Windows 7, 32 bit, for some reason there is no firewood on it.


--------------------
Cube U30GT-W, Asus Eee PC 1001 PXD, FreeLander PD20 (sold), Aoson ML7, Star A1 (pr), Star N9770 (pr) Zopo ZP950 (pr), Zopo ZP500 + (pr), Zopo ZP200 + 3D, Huawei Honor II 2Gb RAM (sold out), Ecoo E04, Meizu MX2, Xiaomi Redmy 3S
JustACat
Message#18
23.06.12, 22:42
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1075
Check in: 04.03.11
Xiaomi Mi Mix 6/256

Reputation:-  316  +

Averus, in fact, more and more often I am convinced that the rule “the best is the enemy of the good” is in effect ... This is to the question of whether it is worth changing something, if everything works fine ... If it really works, it may not be better touch? But still you decide.
The brick is yes, only to throw out. Usually in services on specials. the equipment of the device can be scribbled, but you know, you will not find a cube service here, unless you send it back.
Although the degree of scorching are different. In some cases, it is possible to sprinkle it yourself if the device allows you to enter the flashing mode. That's how uzdorovtsev70, eg.
In our case, there is no statistics yet. It's too early. But it seems that someone has already received a brick in the Evolution theme (I can lie, but something like that ran somewhere) ...

Post has been editedJustACat - 23.06.12, 22:44


--------------------
Xiaomi Mi Mix 6/256 (mi-globe 9.5.1.0)
Xiaomi R3G (OpenWrt / LEDE why)
Xiaomi Amazfit bip (1.1.2.05 stock + 3.4.4 Lolex)
zdorovtsev70
Message#19
23.06.12, 23:01
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 943
Check in: 07.12.10
Nokia 6.1 3/32

Reputation:-  52  +

In my opinion, if the connection after an unsuccessful firmware with the computer passes, then nothing wrong with the tablet will not happen. Carefully with the choice of firmware versions. I’ve re-flashed again because I don’t laugh that when I plugged in, kindly sent me the store as a gift, the HDMI cable didn’t see anything on the TV screen, once again stitched it to the drain, without result, then I returned Evolution, since the output still does not work. Then he tried again to connect, in vain. I moved the cable in the nest of the tablet and everything appeared)

Post has been editedzdorovtsev70 - 23.06.12, 23:11


--------------------
Cube U30GT-W, Asus Eee PC 1001 PXD, FreeLander PD20 (sold), Aoson ML7, Star A1 (pr), Star N9770 (pr) Zopo ZP950 (pr), Zopo ZP500 + (pr), Zopo ZP200 + 3D, Huawei Honor II 2Gb RAM (sold out), Ecoo E04, Meizu MX2, Xiaomi Redmy 3S
Averus
Message#20
24.06.12, 00:53
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 83
Check in: 23.06.12

Reputation:-  2  +

I would like to get rid of the Chinese crap and services with the help of a patch, they occupy quite a bit of oz, how by the way with oz after firmware? more?
If I have a serial number U30GTH16GB12345, then I have the H firmware? I correctly understood, suddenly there are nuances, and I will ...
And what do you advise all the same 1.7 stock or evolution?
JustACat
Message#21
24.06.12, 06:21
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1075
Check in: 04.03.11
Xiaomi Mi Mix 6/256

Reputation:-  316  +

Guys what i sayabout Wi-Fi and speed: something immediately changed to the evolution 1.4 (and it was based on the stock 1.07) - did not check what became of the waffle, but in vain!
Now I tried and ofigel! First of all, the signal actually became much better to hold (where it had never caught it before, it is now catching and even keeps some speed).
Secondly, the speed increased. Not that rocket, but. Where it used to reach 2.7-2.8 MBytes / s now passes for 3. And in my noisy corner (next to a few bluetooth and other radio modules), where they barely kept 300 kilobytes / s - now it keeps from 1 , 5 at least up to 2.5 MB / s! (Previously - this is at 1.06 stock, or at 1.3 evolution).
These are the cakes ...

Averus @ 06/24/2012, 01:53*
If I have a serial number U30GTH16GB12345, then I have the H firmware?
You got it right, you need H.

Averus @ 06/24/2012, 01:53*
I would like to get rid of the Chinese crap and services with the help of a patch
And what do you advise all the same 1.7 stock or evolution?
You answered yourself in line 1 :) If you want to "get rid of ...", then only Evolution.

If anyone is interestedabout the increase in the number of programs in the marketthenhere is the instruction. I have not tried it myself (there is no time yet), but they write that it works with a bang. By the way speakingprox32is going to integrate this fix in Evolution 1.41, he alsoasked, does anyone have any wishes for the new version :)

Post has been editedJustACat - 24.06.12, 20:32


--------------------
Xiaomi Mi Mix 6/256 (mi-globe 9.5.1.0)
Xiaomi R3G (OpenWrt / LEDE why)
Xiaomi Amazfit bip (1.1.2.05 stock + 3.4.4 Lolex)

447 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 17:50