Discussion camera Samsung Galaxy SIII



Rep: (1666)
Discussion camera Samsung Galaxy SIII
Description | Discussion » | Purchase » | Accessories » | Firmware » | Samsung Galaxy S III Fans Club » | Camera talk »

Service code to test module *#34971539# | * Update camera firmware device I9300


Camera maintenance / repair the unit

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links, or through QMS.

Post has been editedartem1701 - 26.04.16, 02:19
Reason for editing: header redesign



Rep: (242)
Camera firmware updated again. Current GDFF02. The idea is to be updated with the latest official firmware FLB. If not, you canupdate handles.



Rep: (1420)
magicm3n @ 10.07.2012, 16:54*
Camera firmware updated again. Current GDFF02. The idea is to be updated with the latest official firmware FLB

Thank you updated. Strangely, three times sewn stitching XXBLFB and anyway the camera is not updated, and yet 99.9% of users will never know that the camera firmware is not updated them.

Post has been editedvintal2002 - 10.07.12, 16:09



Rep: (4018)
vintal2002 @ 10.07.2012, 18:05*
Thank you updated. Strangely, three times sewn stitching XXBLFB and anyway the camera is not updated, and yet 99.9% of users will never know that the camera firmware is not updated them.

in the most piercing, which complete, GDFF02 camera firmware is not. It probably comes OTA or WiFi by personal request



Rep: (8)
My situation is as follows. It does not work, continuous shooting (20 frames), only one picture makes, but it is necessary to click the best shot (8 photos) everything works.

===============
The issue decided. Probably because of the patch for the shooting of hard keys that something has changed. To shoot 20 frames you need to press a touch key Options (the one on the left).

Post has been editedTeQQuila - 10.07.12, 17:31



Rep: (2)
Rather, good color, turn on the pictures, very much: yes2:



Rep: (25)
firmware for the camera is in the kernel if the kernel update to version LFB, it will be possible to upgrade the camera firmware to the latest version, however it has become something to hang with the old program of the firmware LF6



Rep: (81)
I'm not a big issue.
Why in video mode when I turn on stabilization, there is something like a small zumm, ie a little less than the screen is placed, and when I disconnect stabilization can be seen on the screen longer.



Rep: (4018)
Wamglou @ 10.07.2012, 22:22*
firmware is at the core of the camera, if you upgrade your kernel to version LFB, it will be possible to upgrade the camera firmware to the latest version

this is where such infa ?! Never males not hidden camera firmware to the kernel.



Rep: (242)
akropol678,
Because it works soprogram stabilization mode, wherein in any video cameras, where it is program . If interested in more detail in the Google help, but here it will be a flood, since it does not feature sgs3.



Rep: (3)
Watched, read, or not-whether ponyal.Nuzhno camera update and why the handle, not a gun? I understand that the company approves the machine, the rest at its discretion, if with of.obnovleniem camera is not updated, then the approval no- or something I do not understand?



Rep: (591)
lekari, approval nothing to do with, so it was led since the previous Galaxy



Rep: (3)
pANd4 @ 11.07.2012, 19:13*
approval nothing to do with, so it was led since the previous Galaxy

So it is necessary or not. It will not be worse?



Rep: (591)
Until the update, do not know



Rep: (3)
lekari @ 11.07.2012, 19:18*
Until the update, do not know
Clear. The risk is present. Remove, then at least you can update or reset only?

Post has been editedlekari - 11.07.12, 18:45



Rep: (25)
Pako777 @ 11.07.2012, 09:41*
this is where such infa ?! Never males not hidden camera firmware to the kernel.

from xda forum, and even if you just flash the stock Samsung core from LFB on proshifku LF6, it will be possible to upgrade the camera, as I sobsvenno did.



Rep: (591)
Wamglou @ 11.07.2012, 21:01*
from xda forum, and even if you just flash the stock Samsung core from LFB on proshifku LF6, it will be possible to upgrade the camera, as I sobsvenno did.

possibility is to upgrade the firmware and LF6 same nucleus - flashing cameras generally not associated with phone firmware and kernel

Post has been editedpANd4 - 11.07.12, 20:10



Rep: (25)
That's right, in the core LF6 one version of the firmware in the kernel already LFB newer. Refresh can be here and there. In general, I'm not special all of these tricks, read hda there somewhere explained in detail where even the camera's firmware is sitting in the nucleus.



Rep: (591)
Wamglou @ 11.07.2012, 21:19*
That's right, in the core LF6 one version of the firmware in the kernel already LFB newer. Refresh can be here and there. In general, I'm not special all of these tricks, read hda there somewhere explained in detail where even the camera's firmware is sitting in the nucleus.

yes no cameras in the core - click the image and see for yourself. Let's link - with interest honored

Post has been editedpANd4 - 11.07.12, 20:25



Rep: (25)
http://forum.xda-developers.com/showpost.p...p;postcount=377
Sobsno then these two files is
https://github.com/sgs3/GT-I9300_Kernel/tree/master/firmware

Post has been editedWamglou - 11.07.12, 20:37



Rep: (4018)
Update camera firmware device I9300

It is known that in the camera firmware I9300(All of its so-called, but IMHO it is not flashing, and the "driver" between the actual firmware and software apparatus)It is located in the nucleus. If the new kernel contains updated firmware camera, it can update the service code (from the stock dialer) * # 34971539 # - "Phone to CAM FW Write (Rear)". If you want to get a new (or revert to the old) firmware camera without flash the new (old) kernel, bring a list of necessary actions:

1. find out what module vendor we installed in the machine: * # 34971539 # - "Phone / CAM FW Ver Check" - "Cam FW Ver" - the first 2 letters -vendor , eg, GD FF03
2. swing, desired for installation, firmware chamber downstream of the spoilers forits vendor !!! (That is, if the flash of another vendor - do not know .. on sgs2 in the worst case, the camera stopped working .. had to be sewn to the native firmware)
3. unpackingfile, get the file SlimISP.bin
4. copy the file to the root of SlimISP.bin PamyatiTelefona (/ sdcard) .. check: * # 34971539 # - "Phone / CAM FW Ver Check" .. "Cam FW Ver" - pray standing at this point in the chamber, "Phone FW Ver "- must be the firmware that you downloaded and kopirnuli in /sdcard/SlimISP.bin
5 * # 34971539 # - "Phone to CAM FW Write (Rear)" .. wait for about 30 seconds.
6. Reboot after firmware .. serv.kodom check the current firmware version
7. use

Flashing cameras of different vendors (Before application decompress):

BH
Attached fileBHFJ02.zip (161.79 KB)

BK
Attached fileBKFJ01.zip (159.86 KB)

GC
Attached fileGCFC13.zip (160.81 KB)

GD
Attached fileGDFE01.zip (158.44 KB)
Attached fileGDFE02_JPN.zip(158.64 KB)
Attached fileGDFF02.zip(159.24 KB)
Attached fileGDFF03.zip(159.49 KB)
Attached fileGDFI02.zip(158.63 KB)

GE
Attached fileGEFC13.zip (159.2 KB)

Gh
Attached fileGHFJ02.zip (161.79 KB)

Gj
Attached fileGJFG01.zip (158.86 KB)

GK
Attached fileGKFH10.zip (159.58 KB)
Attached fileGKFI01_NoteII.zip(159.69 KB)
Attached fileGKFI03_NoteII.zip(159.37 KB)
Attached fileGKFJ03_NoteII.zip(159.87 KB)

GM
Attached fileGMFJ01.zip (162.46 KB)

ZC
Attached fileZCFC13.zip (159.38 KB)

ZD
Attached fileZDFE02.zip (161.67 KB)
Attached fileZDFE03_JPN.zip(161.54 KB)
Attached fileZDFF02.zip(161.85 KB)
Attached fileZDFF03.zip(162.45 KB)
Attached fileZDFI02.zip(162.41 KB)

ZE
Attached fileZEFC13.zip (157.77 KB)

Zh
Attached fileZHFJ02.zip (165.8 KB)

ZK
Attached fileZKFH10.zip (161.33 KB)
Attached fileZKFI01_NoteII.zip(161.73 KB)
Attached fileZKFI03_NoteII.zip(161.58 KB)
Attached fileZKFJ03_NoteII.zip(163.87 KB)

Additional downloads: Mirror(With firmware files, broken by producers of sensors: B -, G - Sony, Z - Samsung?)

How to decipher the firmware version:
For example, Cam FW Ver: GDFE02

GD - vendor
F - year (F -2012, E -2013, etc.)
E - month (A-January, B-February, C-March, D-April, E -may etc.)
02 - release

How to determine which sensor module is located in the unit:
Front camera :
  • samsung S5K6A3
Rear camera (by type of firmware):
  • G ***** - Sensor Module sony IMX175
  • Z ***** - Sensor Module samsung S5C73M3

Why does not the service code * # 34971539 #:
Because :
1. either use a third-party dialer (for serv.koda neededstockdialer )
2. any missing file / system / app /FactoryTest.apk Which is responsible in particular for the work of this serv.koda

Why at the entrance to an applet on the service code * # 34971539 # button "Phone to CAM FW Write (Rear)" is inactive:
Because the firmware file SlimISP.bin you must putthe root PamyatiTelefona(/ sdcard) And NOT to the root of flash cards


Post has been editedPako777 - 20.03.13, 06:01
Reason for editing: BH + GH + ZH


Full version    

Help     rules

Time is now: 02/05/20, 13:07