> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Samsung GT-I9300 Galaxy S III - Official firmware



Rep: (669)
Samsung GT-I9300 Galaxy S III - Official firmware
PictureSamsung Galaxy S III, SGS3, GT-I9300, m0
Description | Discussion | FAQ | Accessories | Marriage / Repair | Wi-Fi setup and problems | Power consumption (autonomy) | Editing system apk | Modified and stock kernels | Custom recovery | EFS Recovery (IMEI)| Firmware:Official | Custom | MIUI | OpenSource ( 4.x | 4.4 | 5.x | 6.x-7.x ) | Topics for CM12 / 13


Important information!
Be sure to backup EFS and keep it on the external card / PC / in the cloud storage. Otherwise there may be a lot thatgo wrong.
FAQ on firmware 4.3
Best firmware


Drivers and Utilities

Firmware


Firmware instructions

Frequently asked Questions
AT : How do I get the Samsung Galaxy S3 I9300 firmware update?
A: There are several options for receiving updates:
1. Wait for the phone to notify you that there are updates for your phone. To do this, in the "Settings" menu ->"About the device" ->"Software Update" checkbox "Auto Update".
2. Install the Samsung Kies program on the Windows computer, connect the phone to the computer and wait for the update notification in the Kies program.
3. With the help of instructions, firmware, tools and explanations presented in the header of this topic. It is very useful to understand the essence of the process.

AT :Where can I download the user manual
ABOUT :By this link

AT :The Russian keyboard is displayed, and prints in English
ABOUT :Decision.

AT :Where can I see the modem version and firmware version?
A: In Settings-About device-The firmware version is the version of the modem (transfer curve from Samsung), the Build number is the firmware version.

AT :How to change regional binding (Sales code, CSC)?
ABOUT :I have 4.0.4

AT :How to check the regional binding (Sales code, CSC), why does the code * # 272 * (your IMEI code) # not work, why does the CSCSelect program not work?
A: On firmware 4.0.4, this information is checked by dialing * # 272 * (your IMEI code) #. On firmware 4.1.1 and 4.1.2, the code * # 272 * (your IMEI code) does not work. This code can be seen in stock recovery (text in yellow, line - Applied the CSC-code: three letters of the code) and in the Kies program in the firmware version at the end in brackets.

AT :When I try to update by air (FOTA), in response, he writes me: Access to the software service is provided to users one by one in the order of request.
A: According to some data (there are reports of a successful update), you can get a FOTA update without a queue early in the morning, around 5-6 am by MSK. If you do not want to wait for the queue, you can update via Kies / Odin PC / Mobile Odin.

AT:Installed 4.1.2, flashing single-file 4.1.1 or 4.0.4, after the firmware Samsung screen saver hangs and then the phone does not boot, what should I do?
A: You will have to do Wipe with everything and Dalvik Cache and Cache and Data / Factory from Recovery, since there are different databases, so take care of saving your data. Just installing over will lead to Bootloop and the phone will not load further. And just resetting it to the factory settings will not help, all Wipe needs to be done from Recovery. Upgrading runs without problems, and downgrading carries some problems that can be solved, but problems © vasyadubov

AT :How do I remove the root?
A: In SuperSu, on the Settings tab.

AT :Why is the update on OTA not going?
A: With custom recovery there will be no installation of OTA updates. So for the installation of OTA-updates, the recovery is used and there is still no custom recovery working on the stock algorithm with which and only OTA-updates are installed.

AT :How to add languages ​​to enter the firmware 4.1.2, if they are not?
A: "Menu" - "Language and input" - "Samsung keyboard" - "Gear wheel" - "Input languages" - "Available languages"

AT :When changing CSC with CSC Select, the message "preconfigui does not support single csc" appears
О: You have a phone with carrier firmware and a single region, so there is nothing to display, besides, it can be locked under an operator

AT :How to download i9300 Galaxy S3 in Firmware Mode / Download Mod / Download Mode?
О: Loading the device by simultaneously pressing the buttons "Volume down" + "Home" + "Switching on" / "Vol Down" + "Home" + "Power". Exit this menu - long press the "Power" / "Power" button.

AT :How to load I9300 Galaxy S3 into Recovery Mode / Recovery Mode / Recovery Mode / (CWM Recovery / TWRP Recovery, if installed)?
О: Loading the device by simultaneously pressing the buttons "Volume up" + "Home" + "Switching on" / "Vol Up" + "Home" + "Power"

AT :Touchwiz drops when you delete the desktop, everything was fine before the update!
A: ReadFast.

AT :What applications can I remove painlessly from the firmware?
ABOUT :Here is a list(if it saysYes it does not mean that you will not need the application).

AT :I want to get rid of system update notifications, what should I do?
A: The simplest way (Root is required) is to freeze or delete 2 files from / system / app:FotaClient.apk and FWUpdate.apk

AT :How to reset the counters and that the state would be "Normal"
ABOUT :Here is a simple instruction

AT :What is the difference between 1-file, 3-file and 5-file firmware?
A: Mostly the differences are in the content, but the result may differ. 1-file firmware is official, 3-file firmware - service 4.0.4, and 5-file firmware isDetails

AT :What is the SS_DL.dll file for?
A: He is not needed. It can be removed

AT :On 4.1.1 or 4.1.2 the indicator has become dimmer
Oh yeah. This feature 4.1. He now looks at the light sensor and, depending on his data, sets the brightness of the indicator

AT :After the firmware sdcard became sdcard0
A: Starting from 4.1 so for everyone

AT :What Root is needed for my version of Android
A: For 4.0.4 and 4.1.1 CF-Root, Auto-Root, ExynosAbuse. For 4.1.2 CF-Auto-Root

AT :After upgrading to 4.1.1, Flash does not work.
ABOUT :Here is the solution

AT :How to connect the phone as USB flash
A: None.Details

AT :Can I flash my phone with operator firmware?
A: You can.

AT :When sending SMS, the recipient receives one question mark.
A: To send SMS in the SMS settings, set the input mode: Automatic.

AT :After firmware 4.1.1 (4.1.2) in Recovery mode, the robot lies with an exclamation point. What does it mean ?
A: The fact that you have firmware 4.1.1 (4.1.2) and this is stock recovery. Nothing else.

AT :Does stock recovery come in single-file firmware and how can it be restored?
A: Yes, enters. You need to flash it again with your firmware.

AT :How do I replace the font in the phone ?
ABOUT :Link. All questions in the link on the topic.

AT :Where can I find Service Manual?
A: Bby thispost

AT :What should I do if the memory card is not visible from the computer, but does the CWM see it?
A: Decision inby thispost

AT :What is the difference between Odex and Deodex firmware?
ABOUT :This is what.

AT :I put it in one of the Root methods, and no rights are given to applications, and SuperSU applications (or Super User) are not in the program menu
A: You need to put SuperSU from the Market.

AT :Does CF-Auto-Root modify the stock core or not?
A: CF-Auto-Root-m0-m0xx-gti9300 establishes stock recovery from 4.1.2 and adds 3 files to the system in order to obtain root-rights and control the receipt of other root-access programs through SuperSU. It is here called rutovanny stock.

AT :How to enter the "Developer Options" on 4.2.1, 4.2.2 or 4.3?
A: It is necessary in the Menu / Settings / Options / About the device - 7 times to tap on the assembly number and everything will appear.

AT :How to make a wipe?
О: In stock Recovery, make wipe data / factory reset and wipe cache partition.

AT :Tell me how to determine which bootloader is currently installed on the phone?
О: Use the programAndroid System Info. System section, subsection BuildInfos.

AT :After rolling back from the I9300XXEMG4 firmware, the IMEI has flown or changed and there is no possibility to call.Details.
A: The reason is that the new modem in XXEMG4 changes the format of the EFS partition and, when rolled back to earlier versions, IMEI crashes. The solution is to flash XXEMG4 back and IMEI will be restored. Or usesolution with xda


Useful information
What is the difference between firmware for the CIS countries: SER, SEK, RTL, SKZ, CAC?
And what's the point in the "normal" state?
Firmware mode, recovery and how to enter into these modes?
Permissions for files and folders in the EFS folder.
What can be removed from stock applications Samsung Galaxy S III GT-I9300 in firmware from XXBLH1 (4.0.4) to XXUGOE1 (4.3) with the SER region
How to fix md5 sum error in backup
What regional application was added in 4.1.2 for Russia
About CSC and Sales Code
When the serial number starts with 0000 ... and the phone says: No network. The selected network is not available For custom recovery
Where to watch phone status?
Android from the inside or just about complicated
If from the settings menu, perform a reset or do Wipe what will happen to Root
What is the difference Samsung firmware
How Root and Custom Recovery Affect Firmware Updates
For lovers often flash. Possible consequences
Saving firmware downloaded via Kies
How to decipher the name of the firmware
About the features of installing new downloaders
How to check your Galaxy SIII (GT-I9300) for originality
Concerning dances with a sysscope and a "normal" state
What is the difference between the firmware La Fleur and the rest of the stock firmware?
How to remove a message when selecting an update over the air "Your device is changed. There are no updates"
Where does the RAM go?
What to do if your phone does not see the network or writes "No network" "The selected network is not available"
Secret Codes
About the reasons for the rally IMEI
Explanation of the new EFS formatta, patched modems and the lack of mobile communication after updating the firmware
How to enter the "Safe Mode" download
Differences between EFS Versions and Android Versions
Solving the problem with the Internet on 4.3 for Beeline owners
How to remove a translucent Factory Mode window with information about PDA, Phone, CSC, H / W, RF Cal Date, SMD,
Camera firmware(all questions - in the topic of the link).
Russian S-Voice
How to change labels in multi window to 4.1.2:Solution 1 Solution 2(All questions - in the topics on the links).How to activate multi-window?
Getting official stock firmware 4.1.2 SER without regional applications
Stock firmware for Russia with Root. Odex and Deodex
Downgrade to the old Bootloader with the new XXELLA:Method 1 Method 2 Method 3
About SDS (sudden phone death) from tester99 Sudden death fix Ultimate GS3 sudden death thread
Returning the state to "Normal" on a new bootloader and custom recovery and resetting counters
Instructions for "resetting" the counter and getting the status "Normal" using Triangle Away
Change CSC without deleting data (on XDA)(All questions in the link on the topic)
Scripts to clean the phone from the firmware and cores For 4.3
Triangle away. To reset the counter (to the status "Modified" \ "Special" is irrelevant).
Samsung Galaxy S3 Toolkit 7.0andAdb
An application that allows you to use an external ExtSD Card as a USB drive
Upgrading I9300XXLH1 SER (4.0.4) to I9300XXDLK1 SER (4.1.1) as root
Normal condition according to instructions from tester99
How to change the state of the Root phone to "Normal", while maintaining the root
Back up the system (backup) I9300 with / efs from TWRP custom recovery
For those who want to try new firmware 4.1.2 without changing their region
Transition from the old I9300XXELL4 (SER) to the new I9300XXEMA2 (XEF) with a new bootloader
Update official Russian 4.1.2 I9300XXELL4 (SER) to the new official 9300XXEMB2 (SER)
Personal experience on updating from XXELL4 to XXEMB2 from vasom
Firmware update with saving data, settings and, if necessary, resetting counters / status and firmware bootloader
How to flash Bootloader
When trying to turn on, it does not go anywhere and writesFirmware upgrade encountered an issue
How to remove the firmware from Kies
How to find out the region for which issued Samsung Galaxy S3 I9300
How to backup applications and their datawithout Root
How to flash a separate part of any single-file firmware
If you have trouble logging in to recovery
How to solve the problem if the efs folder flies (for those who installed firmware based on EMG4)
How to sign a backup EFS and how to determine from which firmware it is
The official program to raise the "littered" boot
How to find out which version of your EFS backup?
The program untie the smartphone SGSlll from the operator
The program allows you to emulate a USB cable JIG and enter the smartphone in Download Mode.
E: failed to mount / efs (Invalid argument) and how to deal with it!fromshoma_81
Problem resolution: failed to mount / system (Invalid argument)fromLichten
Stock recovery from UGMK6
Unified Android ToolKit v1.2.8 (25th April 2014)
Solving the problem with time zones after 10.26.2014 and the transition to a permanent winter time Method number 2
Incremental update FOTA (throughstock recowery)
Samfirm - utility for quick downloading of official firmware
Reset your pattern, PIN, or screen lock password
Unlock Network (Unlock)


For questions about filling and updating the topic header, contact the Curator at QMS
The curator of the topic is Vetal`M


Post has been editedVetal`M - 26.11.19, 11:52
Reason for editing: editing



Rep: (297)
Dear Download Firmware 4.3 for Uzbekistan and Russia - the big request to compare hashes firmware files. there is a suspicion that it is - one and the same.
He checked himself - the same thing.

Post has been editedgjf - 08.01.14, 19:02
Reason for editing: he learned



Rep: (1503)
tomas50 @ 8.1.2014, 14:59*
dukesov,
Refresh include anything non-interfering - it's obvious! The fact that the body is made in Vietnam to Malaysia - and so I'm confused - Do I need to upgrade if I do mulberries (Moscow) and Malaysia tama? ! Since according bukofkam phone and online SAMMOBAYLe - Beech neskhodyatsya - that I scratch turnip neponyatkah)))

When released to Malaysia - and then wait ...



Rep: (1503)
Ya_Sam @ 08/01/2014, 14:55*
braksi,
I put through a Kiss. As a result, 4.1.2 Lyaflor and continuous reboot. Wipe not help. Now sew one service 4.1.2 and try the air ...

And why ODINom sew 4.1.2? Sew just 4.3 for Russia ...



Rep: (245)
tomas50, Read cap threads. If you want to change the region SER region and place the firmware (4.3 SER) through Odin PC to further updates come OTA for SER.

Post has been editeddukesov - 08.01.14, 14:06



Rep: (55)
gjf @ 08.01.2014, 17:00*
Dear Download Firmware 4.3 for Uzbekistan and Russia - the big request to compare hashes firmware files. there is a suspicion that it is - one and the same.


this SER

MD5 Archive: 3F8336CF7154E48F267E5F191C76A7AB
MD5 File: B0982C91BA04CF5B6AA40B3E0A37B3A8


Post has been editedaus.asc - 08.01.14, 14:10



Rep: (5)
Which regions are in addition to SER Of firmware 4.3 for Russia ???

Post has been editedtashmen - 08.01.14, 14:21



Rep: (297)
Abodone Through Mobile Odin. Then neither Ruth not fly off, no bootloader (unnecessary) will not be updated.



Rep: (1)
gjf
And if through cwm?



Rep: (15)
Almost an hour rocked update to 4.3 on the air, rebooted, and it gives an error and involved. Where is the downloaded pack to get? Ruth slammed. It is possible that resume?



Rep: (25)
both heating telephone affairs on this firmware SER?



Rep: (3)
Why I did through Kindi Ruth Ruth homo walk into rekaveri I overload bodies Ruth flies?



Rep: (297)
Abodone @ 8.1.2014, 14:20*
gjf
And if through cwm?

Do you have somewhere seen zip new firmware for cwm?

Post has been editedgjf - 08.01.14, 14:46



Rep: (55)
Capone07 @ 08.01.2014, 17:48*
Pour on Yandex SER, and then with the links already 3:00 shake.

It has long been flooded with a torrent and a magnet set (22 sida at the moment) and rapidgator - open your eyes!

Post has been editedaus.asc - 08.01.14, 14:54



Rep: (2)
Standing stock 4.1.2 without Rutaceae, etc., connected to Kiyoshi, offered to upgrade to 4.3, but updated 4.1.2 La Fleur. Where to go, what to do ???



Rep: (13)
samsam3110 @ 08.01.2014, 16:12*
Standing stock 4.1.2 without Rutaceae, etc., connected to Kiyoshi, offered to upgrade to 4.3, but updated 4.1.2 La Fleur. Where to go, what to do ???

Wait correction Kiyoshi Update ... or stitching through Odin Odin ... can check the air ... maybe there there



Rep: (14)
samsam3110 @ 8.1.2014, 15:12*
Standing stock 4.1.2 without Rutaceae, etc., connected to Kiyoshi, offered to upgrade to 4.3, but updated 4.1.2 La Fleur. Where to go, what to do ???

put through a 4.3



Rep: (4)
Capone07,
Yandex disk:I9300XXUGMK6_I9300OXEGML1_SER
Magnet link:I9300XXUGMK6_I9300OXEGML1_SER

Attached files

Attached fileI9300XXUGMK6_I9300OXEGML1_SER.rar.torrent(17.45 KB)



Rep: (4)
yakinest @ 08.01.2014, 15:14*
Quote (samsam3110 @ 08.01.2014, 16:12)
Standing stock 4.1.2 without Rutaceae, etc., connected to Kiyoshi, offered to upgrade to 4.3, but updated 4.1.2 La Fleur. Where to go, what to do ???

Odin to flash on the service 4.1.2 SER and further rules updated over the air: rolleyes:



Rep: (466)
A small FAQ on firmware 4.3
1. Is there Knox in 4.3?
No protection there. Any applications, no matter the level of the loader. Samsung KNOX .
The firmware I9300XXUGNH4 It was discovered KRENAAs it is functional it is not yet known.

2. How to get root access on the 4.3?
root access + State Of
CUSTOM BINARY DOWNLOAD: Yes (Xcounts) (Ticking in piercing Odin Triangle Away resets to 0 in the presence of core stock / rekaveri same from its EEPROM, in other combinations will 1 )
CURRENT BINARY: Custom (With the presence of a custom kernel / rekaveri Resets Triangle Away, if you return the stock kernel / rekaveri from his own firmware)
SYSTEM STATUS: Custom (With the presence of root in any form (with / without busybox) Triangle Away reset and re-insertion without root)
Once again the Russian language When you get root access on firmware MK6 and older state will always System: Custom . Reset state preserving root access is not possible. rekaveri version now does not matter. Officially upgrade only if you have a clean firmware and with the counter at zero. The counter and the state 4.3 without removing the root user can reset only ask to MJ9 either 4.1.2 MG4
Spurious state using [FRAMEWORK] Xposed

Methods for obtaining root access
Kingo Android Root - it is established rekaveri in Chinese
2in1: Root + Custom Recovery
Root with the help of a custom rekaveri- it is necessary to flash the file through a custom rekaveri
Root via ODIN PC
If you can not get root-access in any way - try another, it happens. If you can not get root-access using the new version odin'a, try the old version. If all else fails, try to put a custom rekaveri, and only then get root-access.
Root without a computer
At the moment, to get root-access without using a computer is only possible with the help of a custom rekaveri, which, in turn, do not get without a computer / without root-access.
On firmware 4.1.2 to XXEMG4 workedFramaroot. Since 4.1.2 XXEMG4 Framarootdoes not work . Also at this time does not work Towelroot , Baidu root, baidu super root, dingdong root, RomasterSu, Root Dashi, tr v3 and other.
Appearednot confirmed by the news that you can get root-access without using a PC Root Genius Version: 3.1.47

How not to delete (accidentally) on the root PhilZ Touch
When you exit the rekaveri (reboot system now) will be asked to "fix root now?", You must select "NO". In the settings you can disable rekaveri - philz settings → verify root on exit → remove (x) tapom

3. Suitability of the old version of custom rekaveri 4.3?

4. Is there a delay in the opening of the contacts and dialer?
The first launch of the contacts / dialer after a power / reset always occurs with a delay. If the contacts / dialer is not unloaded from memory, the launch takes place almost instantaneously. The most effective ways to solve the problem.

5. In Task Manager, the memory of a 16 GB
This mapping shared memory. 4.1.2 On the memory occupied by the firmware (ROM), not shown.
6 . Where the item "Developer Options"?
Settings → About device (right tab Settings) → 7 times tapnut on the "Build number." After that, select "Developer Options" will become active in the main menu.

7. What applications can be deleted?
An updated list of drain applications Samsung Galaxy S III GT-I9300, the firmware 4.0.4 - 4.3
List of files that can be removed from firmware 4.3
-Language list (description)
Before something to delete, check the operation of the system, using unnecessary freezing® Titanium Backup- if all goes well, make a backup of the removed, so you do not frantically look for, and then later remove.Backups do not happen much!

8. Stock nucleus and modems 4.3

9. Synchronization with Kies
Everything is very simple. If there is an android 4.0.4-4.1.2, then we use Kies 2.6, 4.3 if necessary, the use Kies 3.2.

10. Some differences in the drain applications
1. Play Music constantly hangs in the running.
If not satisfied - disable in Settings ->Application Manager, or remove third-party tools.

2. The battery statisticsWi-Fi All included, and it is turned off.
Settings → Wi-Fi → Advanced (left sensor) → Wi-Fi in sleep mode → select the "always"
Note: must be removed checkbox in the settings Always allow search (allows you to search for the network ... even if you turn on Wi-Fi) / Google Apps → Geolocation → Allow service ... to search for Wi-Fi networks, even if the feature is disabled.

3. Moved from 4.1.2 to 4.3,Player / Gallery I can not see my files
User files in the 4.1.2 are on the way data / media, to 4.3 - data / media / 0. To see the files from the 4.1.2 need root access and third-party file manager.

4. Open notifications about newSMS And there is an empty box
Menu → Settings → Messaging (left sensor) → put checkboxes in points "alert" and "View messages".

5. ProblemsMW / screen lock / effects unlock
Settings → My device → Home screen mode.
If you select the "simple mode", then the lock disappear labels previously installed programs screen, and the screen lock settings menu item becomes inactive "several widgets," "Lock screen widgets", "label", "effects when unlocking".
Also, in "simple mode" function does not work "several windows" (a tile in the Quick Setup curtain slightly illuminated). Sometimes, you need to first force the "Simple Mode", and then return to the "Standard".

6. Crashesgallery when you send the photo / video
If you have deleted / disabled Paper Artist - refit and reboot.

7. Lightseyeat the top all the time
4.3 he was lit, turn off the intelligent waiting in curtain + Settings → My device → Smart screen → uncheck "Smart Trip" and "Smart-turn"

8. Does not workScreenMirroring
Use the patch for mirakasta -ScreenMirroring Patch. After installation, if PATCH button active, pressing it and if necessary reset the apparatus.
AllShareCast (Screen Mirroring) does not work with devices from the state of "special / custom / custom." -Fix "hardware problems" errors for the firmware on the basis of 4.3

9. Departure applicationsVideo
The firmware 4.3 Samsung your video player is deeply integrated with cloud storage. And, it turns out, all the information about the media content, "Video" derives from ".thumbnails" folder. If you delete this folder, and create an empty file instead .thumbnails, the player, respectively, does not find that folder with subfolders inside and flies. It also crashes if "CloudAgent" frozen application.

10. Switching languages ​​inkeyboardswipe the space bar
To return the opportunity to switch the keyboard input language swipe of a space, it is necessary to Settings → My device → Accessibility → Services disable all services.
Sometimes, you need to first enable the Talkback, and then turn off.

11. Voice control
When the hands-free mode, when an incoming call, the phone does not respond to voice commands. You must make sure that this feature is enabled in the Settings → My device → Voice control, as well asdisable vibrate in the sound settings for call and alarm.

12. Transition to winter time
Solving the problem with time zones after 10.26.2014 and the transition to a permanent winter timemethod number 1 method number 2
On firmware I9300XXUGNK1 time zones corrected.

11. What firmware is currently the latest?
I9300 XXU GMK6 → I9300 XXU GMK7 → I9300 XXU GML2 → I9300 XXU GML3 → I9300 UBU GML1 → I9300 UBU GML3 → I9300 XWU GML4 → I9300 XXU GNA2 → I9300 XXU GNA8 → I9300 XXU GNB4 → I9300 XXU GNB5 → I9300 ZSU BNB1 → I9300 XXU GNA5 → I9300 XXU GND1 → I9300 XXU GND2 → I9300 XXU GND3 → I9300 XXU GND5 → I9300 XXU GNA7 → I9300 XXU GNB6 → I9300 UBU GNB1 → I9300 UBU GNE1 → I9300 XXU GNG3 → I9300 UBU GNG1 → I9300 XXU GNH4 → I9300 UBU GNI1 → I9300 XXU GNJ2 → I9300 XXU GNK1 → I9300 XXU GNK2 → I9300 UBU GNK1 → I9300 UBU GNL1 → I9300 XXU GOA2 → I9300 XXU GOB2 → I9300 XXU GOC1 → I9300 XXU GOL2 → I9300 UBU GOD1 → I9300 XXU GOE1 → I9300 UBU GOF1 → I9300 XXU GOF1 → I9300 UBU GOI1 → I9300 XXU GOK1 → I9300 XXU GPB1 → I9300 XXU GPE1
Where such an order
All information is taken from theSamsung Updates.Each firmware release date and have cheynzhdloga number. The procedure for firmware (some newer) is not built on the release date or title number, and on the "tsiferki" in cheyndzhloge. Therefore, this procedure may appear incorrect. It intends to have been added: the original version of Android 4.3 for the Galaxy S III I9300XXUGMJ9 because of the many bugs; "Chinese" and the EEPROM I9300ZNUBML1 I9300ZCUBML1 due uselessness for the ordinary user Galaxy S III on this board. As for the "latest" firmware I9300XXUGNA8, I9300XXUGNB4 and I9300XXUGNB5 (release date 02/17/2014 at all) - they cheyndzhlog 2,372,379 as at I9300XXUGNA2 from 07.01.2014 - it turns out that the firmware has, shall we say, a large number in the title, although in fact it remains older than I9300XXUGNA5 from 01.16.2014 to cheyndzhlogom 2,429,075; I9300XXUGNB6 on 02.25.2014 has cheyndzhlog 2,454,463 as at I9300XXUGNA7 from 21.01.2014; I9300XXUGND1 / 2/3/5 dated 31.03.2014 / 1.04.2014 / 4.04.2014 / 30.04.2014 have cheyndzhlog 2429075 like I9300XXUGNA5.While such a procedure.

12. Added / Removed
Added by
Support GALAXY Gear.
Displays the date on the photo when viewed in the drain gallery. If you have root-access or custom rekaveri, you canremove / disable.
Possibility to process control programs, you must installPermission manager
Photo function with sound - the sound is recorded before and after photos.
Create multiple lock screens and on each its own widget.
The new screen mode - optimized display.
Redesigned interface settings - now with tabs in SGS IV.
S-voice now works without dancing with a tambourine (call control, alarm clock, camera, music).

Removed
3x4 layout to drain the keyboard. Return can be modified or installing third-party keyboards.
Notifications about birthdays on the weather widget -instructions on how to return.
13. Switching to 4.3
1. Before moving to 4.3
Reserved installed software
If you want to keep installed software, then when he was still on 4.1.2 you must vaypnut Dalvik Cache. To do this, set the root or access a third-party file manager + (remove data / dalvik-cache folder), or custom rekaveri (perform Wipe - Dalvik Cache). Thereafter, the counter can be reset and flash via Odin 4.3 for PC and receive firmware of-the counter "0" and state "official of" (remain installed software provided Single-use EEPROM).
Without saving the installed software
If you want to install from scratch, then through rekaveri fulfill all wipes are and I ask multifile.
2. After switching to 4.3
View "Application Manager" and clear the cache careless application. If again - to save all the data and make wipe Dalvik Cache. If the problem persists - make the rest of the wipe.
3. The transition / return to the drain of kastomov
  1. Are doing efs backup with a note on which the modem (this is important - it is necessary to restore it to the same modem). To IMEI is not flew, stitching should be starting with firmware 4.1.2 I9300XXEMG4, but it is not an absolute guarantee, so it's still better zabekapitsya - backups do not happen .
  2. Backup merge beyond the body's internal memory (flash drive, computer, cloud, but at least to yourself, send an email with an attachment).
  3. Vaypaete bodythe full.*
  4. sewservice multifile.
  5. If butlupa wipes are doing already in katabatic rekaveri.

When asked which service to choose: for Russian citizens more reasonable to use the firmware with SER region other fundamental differences between them. To fully use a smart 4.3 sew better, but not necessarily to choose.Without backup efs below 4.1.2 I9300XXEMG4 not sew. At the moment there are 4 options:
* Multi-file itself is everything you overwrite and the body will be "how to Maghazi," but I'm always in the transition from one firmware to another makes complete a wipe problems because of it did not. If anyone thinks this move more than - I do not mind, so be it. But I will continue vaypat =)
14. Problems in the Russian firmwareI9300XXUGNK1
  1. Does not work Internet on Beeline / Beeline Although calls without any problems - you must first remove the access point, and then re-create it manually.
    Samsung’s official response
    software development department of the company of Samsung Electronics aware of the situation and tries to eliminate it in the near future, through the issuance of an operating system upgrade. We apologize for the inconvenience. Link .

  2. Do not operate the latest versionYouTube, Hangouts, Google Calendar - use the old version and not upgrade them.
  3. spontaneous inclusionnfc when working bluetooth.

Direct links to frequently asked questions

thank

Dear forumchanin if you zhmakat button is bad, then on your something is not written. I'm not a mind reader, so if minusuesh this factor, make sure you accomplish your goal to me in PM, so I could correct the error.

By adding and / or correction of the information in the FAQ I ask to address to the PM.
Picture


Post has been editedVetal`M - 09.05.17, 23:30
Reason for editing: In the header



Rep: (245)
Averias, make a backup of your contacts, clear the application data Phone, Contacts, Storage of contacts, messages, restore contacts.

In general, the ideal make wipes are from rekaveri.

Post has been editeddukesov - 08.01.14, 16:17


Full version    

Help     rules

Time is now: 05/02/20, 10:54