> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Samsung GT-I9300 Galaxy S III - Official firmware



Rep: (549)
Samsung GT-I9300 Galaxy S III - Official firmware
PictureSamsung Galaxy S III, SGS3, GT-I9300, m0
Description | Discussion | FAQ | Accessories | Marriage / Repair | Wi-Fi setup and problems | Power consumption (autonomy) | Editing system apk | Modified and stock kernels | Custom recovery | EFS Recovery (IMEI)| Firmware:Official | Custom | MIUI | OpenSource ( 4.x | 4.4 | 5.x | 6.x-7.x ) | Topics for CM12 / 13


Important information!
Be sure to backup EFS and keep it on the external card / PC / in the cloud storage. Otherwise there may be a lot thatgo wrong.
FAQ on firmware 4.3
Best firmware


Drivers and Utilities

Firmware


Firmware instructions

Frequently asked Questions
AT : How do I get the Samsung Galaxy S3 I9300 firmware update?
A: There are several options for receiving updates:
1. Wait for the phone to notify you that there are updates for your phone. To do this, in the "Settings" menu ->"About the device" ->"Software Update" checkbox "Auto Update".
2. Install the Samsung Kies program on the Windows computer, connect the phone to the computer and wait for the update notification in the Kies program.
3. With the help of instructions, firmware, tools and explanations presented in the header of this topic. It is very useful to understand the essence of the process.

AT :Where can I download the user manual
ABOUT :By this link

AT :The Russian keyboard is displayed, and prints in English
ABOUT :Decision.

AT :Where can I see the modem version and firmware version?
A: In Settings-About device-The firmware version is the version of the modem (transfer curve from Samsung), the Build number is the firmware version.

AT :How to change regional binding (Sales code, CSC)?
ABOUT :I have 4.0.4

AT :How to check the regional binding (Sales code, CSC), why does the code * # 272 * (your IMEI code) # not work, why does the CSCSelect program not work?
A: On firmware 4.0.4, this information is checked by dialing * # 272 * (your IMEI code) #. On firmware 4.1.1 and 4.1.2, the code * # 272 * (your IMEI code) does not work. This code can be seen in stock recovery (text in yellow, line - Applied the CSC-code: three letters of the code) and in the Kies program in the firmware version at the end in brackets.

AT :When I try to update by air (FOTA), in response, he writes me: Access to the software service is provided to users one by one in the order of request.
A: According to some data (there are reports of a successful update), you can get a FOTA update without a queue early in the morning, around 5-6 am by MSK. If you do not want to wait for the queue, you can update via Kies / Odin PC / Mobile Odin.

AT:Installed 4.1.2, flashing single-file 4.1.1 or 4.0.4, after the firmware Samsung screen saver hangs and then the phone does not boot, what should I do?
A: You will have to do Wipe with everything and Dalvik Cache and Cache and Data / Factory from Recovery, since there are different databases, so take care of saving your data. Just installing over will lead to Bootloop and the phone will not load further. And just resetting it to the factory settings will not help, all Wipe needs to be done from Recovery. Upgrading runs without problems, and downgrading carries some problems that can be solved, but problems В© vasyadubov

AT :How do I remove the root?
A: In SuperSu, on the Settings tab.

AT :Why is the update on OTA not going?
A: With custom recovery there will be no installation of OTA updates. So for the installation of OTA-updates, the recovery is used and there is still no custom recovery working on the stock algorithm with which and only OTA-updates are installed.

AT :How to add languages ​​to enter the firmware 4.1.2, if they are not?
A: "Menu" - "Language and input" - "Samsung keyboard" - "Gear wheel" - "Input languages" - "Available languages"

AT :When changing CSC with CSC Select, the message "preconfigui does not support single csc" appears
Рћ: You have a phone with carrier firmware and a single region, so there is nothing to display, besides, it can be locked under an operator

AT :How to download i9300 Galaxy S3 in Firmware Mode / Download Mod / Download Mode?
Рћ: Loading the device by simultaneously pressing the buttons "Volume down" + "Home" + "Switching on" / "Vol Down" + "Home" + "Power". Exit this menu - long press the "Power" / "Power" button.

AT :How to load I9300 Galaxy S3 into Recovery Mode / Recovery Mode / Recovery Mode / (CWM Recovery / TWRP Recovery, if installed)?
Рћ: Loading the device by simultaneously pressing the buttons "Volume up" + "Home" + "Switching on" / "Vol Up" + "Home" + "Power"

AT :Touchwiz drops when you delete the desktop, everything was fine before the update!
A: ReadFast.

AT :What applications can I remove painlessly from the firmware?
ABOUT :Here is a list(if it saysYes it does not mean that you will not need the application).

AT :I want to get rid of system update notifications, what should I do?
A: The simplest way (Root is required) is to freeze or delete 2 files from / system / app:FotaClient.apk and FWUpdate.apk

AT :How to reset the counters and that the state would be "Normal"
ABOUT :Here is a simple instruction

AT :What is the difference between 1-file, 3-file and 5-file firmware?
A: Mostly the differences are in the content, but the result may differ. 1-file firmware is official, 3-file firmware - service 4.0.4, and 5-file firmware isDetails

AT :What is the SS_DL.dll file for?
A: He is not needed. It can be removed

AT :On 4.1.1 or 4.1.2 the indicator has become dimmer
Oh yeah. This feature 4.1. He now looks at the light sensor and, depending on his data, sets the brightness of the indicator

AT :After the firmware sdcard became sdcard0
A: Starting from 4.1 so for everyone

AT :What Root is needed for my version of Android
A: For 4.0.4 and 4.1.1 CF-Root, Auto-Root, ExynosAbuse. For 4.1.2 CF-Auto-Root

AT :After upgrading to 4.1.1, Flash does not work.
ABOUT :Here is the solution

AT :How to connect the phone as USB flash
A: None.Details

AT :Can I flash my phone with operator firmware?
A: You can.

AT :When sending SMS, the recipient receives one question mark.
A: To send SMS in the SMS settings, set the input mode: Automatic.

AT :After firmware 4.1.1 (4.1.2) in Recovery mode, the robot lies with an exclamation point. What does it mean ?
A: The fact that you have firmware 4.1.1 (4.1.2) and this is stock recovery. Nothing else.

AT :Does stock recovery come in single-file firmware and how can it be restored?
A: Yes, enters. You need to flash it again with your firmware.

AT :How do I replace the font in the phone ?
ABOUT :Link. All questions in the link on the topic.

AT :Where can I find Service Manual?
A: Bby thispost

AT :What should I do if the memory card is not visible from the computer, but does the CWM see it?
A: Decision inby thispost

AT :What is the difference between Odex and Deodex firmware?
ABOUT :This is what.

AT :I put it in one of the Root methods, and no rights are given to applications, and SuperSU applications (or Super User) are not in the program menu
A: You need to put SuperSU from the Market.

AT :Does CF-Auto-Root modify the stock core or not?
A: CF-Auto-Root-m0-m0xx-gti9300 establishes stock recovery from 4.1.2 and adds 3 files to the system in order to obtain root-rights and control the receipt of other root-access programs through SuperSU. It is here called rutovanny stock.

AT :How to enter the "Developer Options" on 4.2.1, 4.2.2 or 4.3?
A: It is necessary in the Menu / Settings / Options / About the device - 7 times to tap on the assembly number and everything will appear.

AT :How to make a wipe?
Рћ: In stock Recovery, make wipe data / factory reset and wipe cache partition.

AT :Tell me how to determine which bootloader is currently installed on the phone?
Рћ: Use the programAndroid System Info. System section, subsection BuildInfos.

AT :After rolling back from the I9300XXEMG4 firmware, the IMEI has flown or changed and there is no possibility to call.Details.
A: The reason is that the new modem in XXEMG4 changes the format of the EFS partition and, when rolled back to earlier versions, IMEI crashes. The solution is to flash XXEMG4 back and IMEI will be restored. Or usesolution with xda


Useful information
What is the difference between firmware for the CIS countries: SER, SEK, RTL, SKZ, CAC?
And what's the point in the "normal" state?
Firmware mode, recovery and how to enter into these modes?
Permissions for files and folders in the EFS folder.
What can be removed from stock applications Samsung Galaxy S III GT-I9300 in firmware from XXBLH1 (4.0.4) to XXUGOE1 (4.3) with the SER region
How to fix md5 sum error in backup
What regional application was added in 4.1.2 for Russia
About CSC and Sales Code
When the serial number starts with 0000 ... and the phone says: No network. The selected network is not available For custom recovery
Where to watch phone status?
Android from the inside or just about complicated
If from the settings menu, perform a reset or do Wipe what will happen to Root
What is the difference Samsung firmware
How Root and Custom Recovery Affect Firmware Updates
For lovers often flash. Possible consequences
Saving firmware downloaded via Kies
How to decipher the name of the firmware
About the features of installing new downloaders
How to check your Galaxy SIII (GT-I9300) for originality
Concerning dances with a sysscope and a "normal" state
What is the difference between the firmware La Fleur and the rest of the stock firmware?
How to remove a message when selecting an update over the air "Your device is changed. There are no updates"
Where does the RAM go?
What to do if your phone does not see the network or writes "No network" "The selected network is not available"
Secret Codes
About the reasons for the rally IMEI
Explanation of the new EFS formatta, patched modems and the lack of mobile communication after updating the firmware
How to enter the "Safe Mode" download
Differences between EFS Versions and Android Versions
Solving the problem with the Internet on 4.3 for Beeline owners
How to remove a translucent Factory Mode window with information about PDA, Phone, CSC, H / W, RF Cal Date, SMD,
Camera firmware(all questions - in the topic of the link).
Russian S-Voice
How to change labels in multi window to 4.1.2:Solution 1 Solution 2(All questions - in the topics on the links).How to activate multi-window?
Getting official stock firmware 4.1.2 SER without regional applications
Stock firmware for Russia with Root. Odex and Deodex
Downgrade to the old Bootloader with the new XXELLA:Method 1 Method 2 Method 3
About SDS (sudden phone death) from tester99 Sudden death fix Ultimate GS3 sudden death thread
Returning the state to "Normal" on a new bootloader and custom recovery and resetting counters
Instructions for "resetting" the counter and getting the status "Normal" using Triangle Away
Change CSC without deleting data (on XDA)(All questions in the link on the topic)
Scripts to clean the phone from the firmware and cores For 4.3
Triangle away. To reset the counter (to the status "Modified" \ "Special" is irrelevant).
Samsung Galaxy S3 Toolkit 7.0andAdb
An application that allows you to use an external ExtSD Card as a USB drive
Upgrading I9300XXLH1 SER (4.0.4) to I9300XXDLK1 SER (4.1.1) as root
Normal condition according to instructions from tester99
How to change the state of the Root phone to "Normal", while maintaining the root
Back up the system (backup) I9300 with / efs from TWRP custom recovery
For those who want to try new firmware 4.1.2 without changing their region
Transition from the old I9300XXELL4 (SER) to the new I9300XXEMA2 (XEF) with a new bootloader
Update official Russian 4.1.2 I9300XXELL4 (SER) to the new official 9300XXEMB2 (SER)
Personal experience on updating from XXELL4 to XXEMB2 from vasom
Firmware update with saving data, settings and, if necessary, resetting counters / status and firmware bootloader
How to flash Bootloader
When trying to turn on, it does not go anywhere and writesFirmware upgrade encountered an issue
How to remove the firmware from Kies
How to find out the region for which issued Samsung Galaxy S3 I9300
How to backup applications and their datawithout Root
How to flash a separate part of any single-file firmware
If you have trouble logging in to recovery
How to solve the problem if the efs folder flies (for those who installed firmware based on EMG4)
How to sign a backup EFS and how to determine from which firmware it is
The official program to raise the "littered" boot
How to find out which version of your EFS backup?
The program untie the smartphone SGSlll from the operator
The program allows you to emulate a USB cable JIG and enter the smartphone in Download Mode.
E: failed to mount / efs (Invalid argument) and how to deal with it!fromshoma_81
Problem resolution: failed to mount / system (Invalid argument)fromLichten
Stock recovery from UGMK6
Unified Android ToolKit v1.2.8 (25th April 2014)
Solving the problem with time zones after 10.26.2014 and the transition to a permanent winter time Method number 2
Incremental update FOTA (throughstock recowery)
Samfirm - utility for quick downloading of official firmware
Reset your pattern, PIN, or screen lock password
Unlock Network (Unlock)


For questions about filling and updating the topic header, contact the Curator at QMS
The curator of the topic is Vetal`M


Post has been editedVetal`M - 26.11.19, 11:52
Reason for editing: editing



Rep: (1505)
* Sovrock,
Nice to hear that our "old people" back in the ranks! : Yes2:



Rep: (4)
Good evening. Flew system, when clamping the three buttons go out on the TWRP, put a long time, the flash drive where the system image can not be found. power jack does not work, do not connect to a computer mogu.Nelzya whether to throw some sort of a system image to restore the SD card with TWRP rekaveri. Samsung GT-I9300 Galaxy S III has certainly view.
Attached Image
Attached Image


Post has been editedHORHO - 20.06.19, 19:59



Rep: (3)
* HORHO , Download the image, drop it on a flash card and install it through the recovery. Firmware for recovery.



Rep: (16)
* HORHO , But for the TWRP

https://yadi.sk/d/Ntnqvv7Iqb78Q



Rep: (91)
Ctanicla_-v @ 07.06.19, 19:20*
You may suggest what to do in my phone start button does not work. The studio can not determine the type of failure ...

The answer is very simple - attributed to another shop, which employs thinking and rukastogo people, and first studio no longer had to walk



Rep: (0)
The guys on the PCT device, some official firmware from 4.1.2 to put. There's just a list of large, I do not understand. And it is better than 4.1.1?

Post has been editedplayful_bunny - 02.08.19, 11:00



Rep: (1505)
Playful_bunny @ 08/02/19, 10:57*
on the PCT apparatus

so look what kind of firmware it is, what kind of region. For Russia - SER

PS Although here above someone complained that it was in the Russian lot of rubbish, and it’s better to put some European ...

Post has been editedrusigor - 02.08.19, 14:13



Rep: (183)
* rusigor
PCT device with android 4.1.1. ;)
I'm Vanga next question "why Odin does not see the phone?"



Rep: (1505)
Mamaster199 @ 08/02/19, 14:56*
PCT device with android 4.1.1.

The answer is nothing - carefully read the question again ...



Rep: (0)
hi all pomagite ETU remove wallpaper from the desktop.
Prashivka hard reset does not helps.
http://piccy.info/view...d1f291e5f881743472fe3/

Post has been editedArthurik2 - 16.08.19, 23:54



Rep: (113)
* Arthurik2 ,

Samsung GT-I9300 Galaxy S III - Official Firmware (Post enlightened grandfather # 24957552)



Rep: (0)
What to do? France stands 4.1.1, Operator, I want to sew on 4.1.2. The cap threads can not find anything about it ...

Attached Image


Post has been editedplayful_bunny - 23.08.19, 07:14



Rep: (0)
secure check fail modem firmware in the phone mode, error, sews Octoplus Samsung Tool, through one<ID: 0/009>SingleDownload.
<ID: 0/009>modem.bin
<ID: 0/009>NAND Write Start !!
<ID: 0/009>FAIL! (Auth)
<ID: 0/009>
<ID: 0/009>Complete (Write) operation failed.
Blade of the chip?



Rep: (0)
Goodnight how UTB restore the body is known, 2012 when the blinking screen saver Samsung probyval different firmware via one single file March 4, etc. in the flashing mode but also includes the label Zadie Batterys sek region to begin Thanks



Rep: (183)
Andron19742000 @ 03/09/19, 22:03*
what is known of 2012 when the screensaver flashes Samsun

AKB home? Most likely dead.
Andron19742000 @ 03/09/19, 22:03*
probyval different firmware via one

Lay out the log of Odin. We can not guess what mistakes he's writing.
Andron19742000 @ 03/09/19, 22:03*
sticker Zadie Batterys sek region

photo spread. Maybe this is not the S3

Post has been editedmamaster199 - 03.09.19, 22:19



Rep: (0)
Good morning here is the pops
Attached Image


Post has been editedVetal`M - 04.09.19, 17:01
Reason for editing: We remove the images under the spoiler



Rep: (183)
* Andron19742000,
The flash mode on the phone which model is written? Can I have a photo



Rep: (0)
Well, thank you

Attached images
Attached Image



Rep: (113)
* Andron19742000 ,
And what is there on the input mode rekaveri to begin with?
That there is a firmware it was apparently murky mystery, wonder, and remains poking a finger at random.SDSthe same as the version.

Post has been editedDinis124 - 04.09.19, 23:49



Rep: (0)
Good afternoon firmware is not clear given here are bricks, blocks sew different firmware and stop at one when the system boots, and can be stopped for a long time without moving in the photo can be seen today in one to load tvrp 3.2.1 in the rekaveri not see SD memory card is only visible when the phone's memory to copy the firmware to your phone can have a way to

Attached images
Attached Image


Full version    

Help     rules

Time is now: 12/15/19, 04:52