Good morning after 13,000 years [offline]
Group: Friendssavagemessiahzine.com Messages 1921 Check in: 23.01.11 Xiaomi Mi Max 2 4/64
Reputation: 146
| Acer Iconia Tab A501 - FirmwareAcer Picasso 3GDescription | Discussion � | DevFAQ � | Purchase �| Accessories �| Breaker � | Firmware 3.x �| 4.x firmware �Important information - Before any actions with the firmware, it is strongly recommended to remember your UID, information on how to get it is in the header.
Drivers, Utilities, GAPPS - Android SDK- from Google for developers
- USB Driver- from Acer
- Afterota- universal utility for firmware loaders and recovery. Identifies all the numbers of your tablet, restores your tablet
- GAPPS- Google applications.
Unofficial firmware Android 5.0.1 (lollipop):
CM12 5.0.2 A500 / A501 - V ... from thor2002ro For providing links to timely updates, thank you -dimonosandrussell82Themes can be downloaded ==>. Download CM12 5.1.1 A500 / A501 -V7 final - hereCM12 5.1.1 A500 / A501 - V4 - GoogleCM12 5.0.2 A500 / A501 - V2 - Google, GappsCM12 5.0.2 A500 / A501 - V1 - Google, GappsCM12 5.0.2 v0 from 02/17/15 - Gapps, Google, A sourceChangelog (Changelog) v4 - synchronization 28/06 cm12.1 - Port cm12.1 to new device directory V3 - Timing 29/05 cm12.1 - Transition to base 5.1.1 - Ported everything that was 5.1 CM12 5.0.2 A500 / A501 - V2 - Synchronization with CM12 from 03/29/15 - All changes from omnirom v6 - Adapted hwcodecs - Updated power hal - Updated automatic brightness correction (should work much better) - Some fixes data modem a501 - Increase zram size - Update trebuchet (launcher) - SQLite Optimization - Core t70 CM12 5.0.2 A500 / A501 - V1 - CM12 sync 02.27.15 - All improvements from omnirom v5 - Added experimental email fixes CM12 5.0.2 v0 from 02.17.15 - first release - synchronization with CM - has some changes from omniRom - GUI is fast - GPS is working, but slowly - buttons on the left - camera works - codecs work, but not always - auto-rotate screen switch works - a501 3G / GPS not working yet - 3G Huawei does not work with USB yet - power hal does not work - VPN has some problems - GAPPS is not there yet, but you can get it from OmniRom - there is no supersu in the firmware yet
Features Based on 5.x CyanogenMod 12 (many features - Search for help) Works: WIFI / Bluetooth audio memory cards 2D / 3D acceleration cameras GPS can be loaded with data / system / cache btrfs / f2fs / ext4 connection of drives in the ExFAT / NTFS / Btrfs / F2FS system dpi without affecting Google Apps Huawei 3G USB support a501 3G / GPS support software booster USB audio sound card support HDMI GPU acceleration turn lock key built-in superuser rights core t68
Additionally For review: Do a Wipe when upgrading from any firmware. Tablet interface went away and buried! Now only phone! Install / Update: erase data install zip install gaps reboot Installation and configuration take place in a few minutes. Additionally for installation (it helped me): install TWRP recovery REV 2.0 beta4 - Googlefrom TWRP recovery, format cache and data in f2fs, and system in ext4
OmniRom v ... Android 5.0.2 (lollipop) for A500 \ A5001 from thor2002ro Attention: Before installation, make a FULL wipe Only phablet ui (phone interface) Ext4 and F2FS data must be in order to load the cache GAPPS and some apps don't work yet including supersuScreenshotsFor providing links to timely updates, thank you -dimonosDownload v12 final dated 03/27/2016 - herev11 from 08/31/2015 - Google. v9 from 07/31/2015 - Googlev8 from 05/24/2015 - Yandex.Disk, Googlev7 from 03/31/2015 - Google, Gappsv6 from 03/11/2015 - Googlev5 from 02.26.2015 - Yandex.Disk, Googlev4 from 02/13/2015 - Yandex.Disk, Googlev3 from 02.02.2015 - Yandex.Disk, Google. Gapps - Yandex.Disk, Google Before installation, it is MANDATORY to make DATA WIPE !!!v2 from 01/13/2015 - Yandex.Disk, Google. Gapps is the same from V1. v1 Android 5.0.2 from 01/08/2015 - Yandex.Disk, Google. Gapps - Yandex.Disk, GoogleV0 from 12/16/2014 - Google Drive, Yandex.Disk. Changelog (Changelog) v11 - synchronization from 08/30 - Update Android 5.1 to r13 - New core with new optimization - new screen color settings - Updated usb audio - some of the menus from the firmware for a500 were copied
v9 - sync 23/06 - Redesigned device directories - Some Bluetooth enhancements v8 - synchronization with Omni - transition to a new base - 5.1.1 - total port to 5.1 v7 - Synchronization with Omni from 03/31/15 - Updated power hal - Updated automatic brightness correction (should work much better) - Some fixes data modem a501 - Increase zram size - SQLite Optimization - Core t70 - Updated terminal v6 - omnirom update 03/11/2015 - Update processing software composer (?) - power hal update - ART optimization - Attempt # 1: Added hardware decoders - First boot display - Fixed Libpng security vulnerability CVE-2015-0973 - Attempt to fix the SDCARD and connect the USB-drive - Attempt to repair email application v5 - synchronization with Omni - powerhal is very redesigned - change the frequency of the processor in powerhal - Fstab update to improve F2FS performance - added navigation bar in settings - added extended volume panel - fixed minor issues in the launcher - deleted live wallpapers - added compiler-optimized flags for Tegra2 for all C libraries and binaries - updated A501 GPS and 3G modules - fixed some storage problems related to fuses again - codec update - possible fix for Netflix - disabled legacy memory layout - kernels are recompiled - enabled ksm - network updated v4 - omnirom sync - return of external NTFS mount - return of external F2FS mount - the screen rotation lock is returned by the switch - memory notifications - redesigned butanimation - the limit of background applications is now 16 - more videos in the GUI - the animation should be smooth - Added settings for Launcher - the core has changed, the default is 4.7-A9 - Fstab optimized - improved codec - there is a setting of soft buttons - redesigned power hal - CPU is more nervous now - redesigned composer hal - more smoothness and annoying blur is removed - updated lights hal - Minimum auto brightness is limited - updated and remade audio hal - Google Voice Search and other goodies from 5.0 work - change the value of the volume buttons - fixed (on in the settings) - PPTP / L2TP / ipsec VPN fixed v3- synchronization with omni - select Android rotation - when you change the screen orientation changes the assignment of volume keys - fixed boot animation "snow", before there was a black screen - significant GUI improvement - VSync and 3D work buffering - audio update (microphone works: P) - the camera is fully working - Wi-Fi should be more stable - all 14 WiFi channels must be unlocked - Around 50MB should be free GAPPS and supersu installed in the system - new GAPPS v2 v2 - Improved UI speed - partial codec support - the camera is now working, but it can crash (you need to stop the application and restart) - profixen A501 identification in the tablet menu - the microphone is still not working - removed 4.4 v1 - updated lollipop to 5.0.2 - GPS - can load with data / system / cache btrfs / f2fs / ext4 - mount exfat / ntfs / btrfs / f2fs - custom dpi should not affect google apps (should work) - A501 support 3G / GPS (should work) - sound boost - support usb audio sound card - btrfs mount - ntfs mount - HDMI - gpu oc - it is difficult to change the bottom buttons (optionally the location on the left) - Google app fixed (wifi died on my tablet, I can't check it) - fixed internet browser - added tegraowners menu - added donation and hardware info - added option to change the host name in the developer menu - updated terminal emulator
Features Based on 5.x OmniROM WIFI / Bluetooth audio storage 2D / 3D acceleration T68 core What works / does not work doc not supported GPS can be loaded from data / system / cache Btrfs / F2FS / ext4 fstypes ExFAT / NTFS / Btrfs / F2FS mounting storage cameras custom dpi without sacrificing google apps ListView animation Huawei 3G USB Support a501 3G / GPS support USB Ethernet menu sound boost Support USB audio sound card full hw codecs hardware lock turn Btrfs mounting NTFS monbhjdfybt HDMI GPU OC handle zerocd USB modem (USB modem mode switch)
Android 4.4.2 - KK OmniRom:
Kit Kat (Android 4.4.2) for Acer A500 / A501 from thor2002ro Root is not included! We download separately and install via Recovery - UPDATE-SuperSU-v1.89.zip(1.13 MB) Tuning firmware - ����������� ����� �� KK 4.4.2 Tegraowners OmniRom downloadStarting with V4 - added 3G support.ScreenshotsDownload v23 from 02/06/2015 - YaDisk, Googlev22 from 11/22/2014 - YaDiskv21 from 10.30.2014 - YaDiskv20 from 10/01/2014 - YaDiskv19 dated 09/15/2014 - YaDiskv18 from 09/03/2014 - Googlev17 from 08.28.2014 - Yandex.Disk, Google, Gapps on YaDiskv16 dated 08/20/2014 - Googlev15 from 08/11/2014 - Google, Gapps on GoogleDiskv12 from 06.24.2014 - Yandex.Disk, Googlev11 from 05.23.2014 - Yandex.Disk, Google, Gapps on GoogleDisk, Gapps on YaDiskv10 May 1, 2014 - Yandex.Disk, Googlev9 from 04/04/2014 - Yandex.Disk, Googlev8 from 03.10.2014 - Yandex.Disk, Googlev7 from 03/08/2014 - Yandex.Disk, Googlev6 from 03/03/2014 - Yandex.Disk, GoogleV5 from 02.22.2014 - Yandex, Google. Gapps is old. v4 from 02/13/2014 - Google Drive, Yandex.Disk - Gapps. v3 of 02/09/2014 - Google Drive, Yandex.DiskV1 from 10/19/2014 - Google Drive, Yandex.Disk, Gapps. Changelog (Changelog) v23.1 Final - Profix Camera - synchronization with Omni, last - fixed three-dimensional buffering and vertical synchronization (from 5.0) - more space is saved, as in 5.0 v22 - Synchronization with Omni on 11/17/2014 - Profi chrome in windowed mode (you go google with your windowed mode) - Updated supersu 2.16 - Update Sidebar - Added the ability to change the priority connection's WiFi network - Added the ability to see connected devices on the created WiFi access point - Updated battery saver options - Updated codecs - Improved interface speed - Added option in flavor to download directly to ART execution (selected by default, since L is absent, and each application must support it or will support it in the near future) v21 - synchronization with omnirom - Core T68 - Updated control animation - Updated notifications on the lock screen - Alternative youtube fix - Small wifi update - Updated floating window and sidebar circle - Added a few GCC compiled kernel versions in Aroma (best optimization for you) v20 - Synchronize with Omni - Bluetooth updates - Localization updates - Updated storage / mounting - Updated UI smoothness - Moved zram (swap) FSTAB activation from init.d - New core T67 - updated WiFi - Fixed bug in HW codec code - FIX YOUTUBE v19 - Updated tab in performance menu - wakelocks - omnirom sync - updated floating window - add an option to open a notification in a floating window (long press on notifications) - add Battery Saver mod to the battery menu - DRM plugin Widevine now works you can check with the DRM Info app - fix Huawei RIL path build.prop v18 - wakelocks performance updates - Added a switch to switch the layouts NavBar - Camera recording fixes - Added microphone switch option in tegraowners menu - Small UI Tricks - Update audio hal - Big kernel update - USB, memory, processor, sleep, i2c, RTC, control micswitch, update Ubuntu V17 - Core: - increase in voltage for 216 (775) and 1600 (1435) - added mouse and keyboard support - Ubuntu update - build compiler with 4.7 - reboot options in the reboot menu - in the performance menu tab wakelocks - Navigation buttons in the left corner (you may need a sidebar if you edited them) - rework Google's calculation on in phablet dropdowns bar calculations ... they are slowly causing delays v16 - omnirom update 08/19/14 - Reworked recent memory applications - Kernel Update - Fixed GPS - Fixed crash when installing Google+ - Added alternative WiFi FW option (works only on some chips) - Fixed sound change button when changing screen orientation v15 - omnirom update 08/11/14 - Update kernel to host new options in the performance menu - Improved performance menu - Improved UI performance - Location detection enabled Google 4.4 v14 - omnirom update - Kernel T61 update - 3.8.13.27 - new WiFi driver - Usb_modeswitch to switch USB modems must use it manually ... - Improved UI performance - trebuchet added (launcher) - has tablet mode and dock off function - Update codecs - Update supersu - Fixed fake id - WiFi update - Audio Update - Updated Huawei modem - Updated GAPPS v13.1 - added audio.r_submix.default - Updating the t60 core - porting f2fs to 3.16 RC 07/20/14 v13 - 4.4.4 update YEEEEE !!! - Fix ext4 sdcard connection with non SELinux ... - New approach to video HAL / backward compatibility library - Update backlight HAL - 4.4 UI resources that are not updated from JB are updated - Kernel update - Cache memory workarounds - Ubuntu update 3.8.13.26 - Dalvik optimized v12 - Android updated to 4.4.3 - Dual panel settings - improved user interface performance - Updates for A501 - 3g / gps - SELinux disabled - Added a donate button in the about menu - New Core - T58 - Updated WiFi configuration - Updated sync framework - Interactive Governor Updates - Profsensen L2TP VPN - Improved Bluetooth - Improved audio HAL, now runs at 48000, as it should on 4.4 - Removed the script Netflix- init.d - Changes in storage permissions - Increased read buffer from 512kb to 2mb - Proffsen Chromecas, works well. v11 - external Btrfs storage and f2fs received commit - btrfs / f2fs / ext4 storage type can be binary - Converted A501 GPS / RIL / RIL modem service - New WIP Camera Design - updated stagefrighthw - Added xmesg, alternative to buffer - Updated device permissions - Updated LockScreen notification - Updated app circle sidebar - Updated implementation theme - miniatures in the gallery were converted - OmniSwitch option floating window - new core T57 - Added suspersu pre-installed - Improved video performance - The introduction of new GAPPS v10 - improved Tegra powerhal - improved frequency control in sleep mode (better out of sleep) - better optimization in governor tunnables - The maximum frequency of the processor when sleeping is now 816mhz from 216 MHz, since this can lead to better spilling - in powerhal will not be spam Logcat as before - without an interactive governor, the chosen powerhal will basically not do anything - New implementation of btrfs / f2fs tools in ROM - changed the button adjustment panel - ROM now supports external f2fs storage type - Lowmemorykiller optimizations embedded in ROM - A501 attempt to fix problems with 3G wakes up from sleep mode by skipping the option of restoring the network and letting the modem handle it (untested) - All Google Location Overlays are Active. - Use cache partition for dexopt system applications - New APNs database for 3G - Updated lockscreen notification - Updated floating window implementation - Update Chrome Library for java7 - Themes are implemented - Improved quiet hours - Improved lockscreen notifications - Fixed strange delay around ROM - Removed trebushu as we do not have his wallpaper hack - Update kernel and zcache included in it - given the removed format data point to the aroma, because of it there were problems, use twrp format menu to format data v9 - updated databases - updated terminal - setting SELinux by default - Added warning when you increase the volume - TaskManager works in landscape orientation - Tegra2 library optimization - improved multi-user support - a floating application in the App Circle settings, like that of Samsung - updated RAM indicator - new t55 core v8 - blur / notification lock screen updated - updated terminal - updated power hal - sepolicy updated - added healthd configuration - updated trebuchet, now it is based on launcher3 - changed menu animation - immersive mode updated - internal / external Readahead changed from 1024 to 2048Kb - updated Bluetooth - improved GPU performance v7 - Updated lock screen - better optimization of LIBS - better GPU optimization - added the option of formatting (really format) data to ext4 / btrfs / f2fs during installation - proxy cpu / boost - new t54 core v6.1 - Fixed notifications on lockscreen and disabled FC - fixed OpenSSH - new t53 core (ported from f2fs 3.14 over 300 patches changed) - added support for system / data / cache f2fs - f2fs tools are included in ROM (rom) - recover zip in f2fs (recovery add-on zip with f2fs tools (recovery does not support f2fs f2fs (not recommended since f2fs support since)) - download in stuff to know section) v6 - Fixed crash of RIL for A501 - Updated Android terminal - fixed Bluetooth - accelerated cache by 200% - added more battery icons - added animation modes (ListView started to work) - added hours and font changes in them - updated omniswitch rework - added lockscreen options (in security settings) - notifications (in security settings) - Updated kernel to t52 (nothing special) V5 - Btrfs cache support - Added information about the device (in the settings) - new boot animation - improved boot animation performance - improved GPU performance - fixed terminal - did something with the application manager - improved bionic performance - improved tegra power hal - Added SMS menu (in settings) - added GPS service downloader - new core t51 - Experimental fixed Netflix v4 - added back tegraowners menu - GPU os added to tegraowners menu - Added a sound enhancement to the tegraowners menu. - Custom dpi added to tegraowners menu (custom dpi added in tegraowners menu) - Added a download with data or system in Btrfs - Auto-mount Btrfs external card - Added support for USB sound card - A501 gps / 3g added back to the aroma option 3g works again - HW codecs should work - Removed signal icon if 3g is not selected v3 - Improved 3d and VSync performance - improved desktop performance - Aroma is better to choose point 3g Open source projekt v2 - updated core to T50 - NTFS mount added - Added support for hardware screen rotation switch - fixed ril for a501 - battery changed - gps can be checked for performance by replacing system \ lib \ hw \ gps.tegra.so with gps.tegra.so.a501 - update clock menu - added omniswitch v1 - new core T49 - 3.8.13.15 - fixed problem with GAPPS - fixed youtube problem - fixed HDMI - new boot animation - multi-window mode - fixed clock application - rils returned for a501 - optimized code for tegra 2 v0 - first firmware release Features - made on the basis of OmniRom - the camera works - gps - Wi-Fi / Bluetooth - audio - 2D / 3D acceleration - HDMI \ w sound - ExFAT / NTFS / Btrfs mount - hardware switching screen rotation - a501 3G support - USB Huawei 3G - GPU OS - full HW codecs - USB audio support - data \ system can be loaded in the Btrfs system - core T50
Android 4.3.1 - JellyTime:
Jelly Bean (Android 4.3) for Acer A500 / A501 from thor2002ro Download v8t5 from 12/22/2013 - Yandex.Disk ====>and v8t6 from 12/23/2013 - Yandex.Diskv7 from 12.12.2012 - Yandex.DiskFirmware v6 from 11/20/2013 - google drive, Yandex.Disk Gapps \ GAPPS 4.3 - google driveFirmware v3 from 10/07/2013 googl driveFirmware v4 from 10/19/2013 google driveGapps 4.3 google driveFeatures Made on the basis of Cyanogenmod 10.2 Automatic mounting of NTFS Єexperimental auto mode exfat Btrfs outdoor installation Phablet / tablet mode Recent memory applications Notification menu User settings dpi without affecting GAPPS Navigation gestures Hardware rotation lock Full hw codecs USB audio sound card support USB Ethernet Menu New core T42 + List of changes v8t6 - another attempt to fix the delay problem ... v8t5 - probably fixed delay ROM - Updated core to T47 - Updated WiFi driver - Update 3.8.13.14 - Sync framework - binder update - Update kernel configuration. v6 - synchronization with cm10.2 - clock in the center (only phabletUI) - network traffic - privacy guard (security->incognito mode) you can set special requirements for applications (ported from KitKat) - minor fix for rendering opengl - optimization of pie service - amr compilers optimization - open source RIL for a501 - new animation when scrolling list - new t45 core v5 - internal test assembly v4 - Android 4.3.1 - synchronization with cm10.2 - fixed some problems with 3D applications - update codecs - update kernel to T44 - fixed new version of Skype v3 - work 3G-modem for a501 v2 - synchronization cm10.2 - Fixed battery in the notification menu - new t43 core v1 First firmware version
Android 4.2 - Jelly Bean:
Jelly Bean (Android 4.2.1) for Acer A500 / A501 from thor2002ro v13 Firmware compiled based on Cyanogenmod 10.1 GPS fix for Thor V10-11 etc.This fix can not be put on the A500. GPS fix for Ericsson F5521GW 3g / gps module (set only if the GPS did not work on the original firmware). Tablets with a huawei em770w 3g / gps module can theoretically work without a fix (on the original Thor firmware), with this GPS fix it will definitely stop working on tablets with Huawei - we put thanks and advantagesdevmax1Complete Russian translationDownload V13 firmware http://d-h.st/FYVV12 firmware http://d-h.st/spwV11 firmware http://d-h.st/KjrV10 firmware http://d-h.st/JsAV10-2 http://d-h.st/GbGV9 firmware http://d-h.st/TTYV8 firmware http://d-h.st/dYl http://www.multiupload.nl/1RL0SPHNY6V7 firmware http://d-h.st/c3PV6 firmware http://d-h.st/1GW ( Tegraowners_JB-MR1_ROM_v6t2.zip) (standard installation with all wipes, if you don’t know how to install, under the spoilers below you can find the manual for installing firmware) GAPPS GAPPS for v6 (updated 12/12/12) gapps-jb-20121212-signed.zip(flash without wipe) User GAPPS for v7 - v10: http://d-h.st/jmD(flash without wipe) User GAPPS for v11: http://d-h.st/K0S(flash without wipe) Custom GAPPS for v12: V1 V2Custom GAPPS v2 for v13: http://d-h.st/MM6Features • Based on CM10.1. • Automatic mount NTFS. • Automounting mode exfat (experimentally). • Phablet / tablet mode. • Latest applications using memory. • Notification settings menu. • Custom dpi settings without affecting GAPPS. • Navigation gestures. • Hardware lock rotation. • Full hw codecs. • Rotate the volume keys. • Support for sound usb audio cards. • New core ?? t33. What to run • Full HW codecs. • Doc not tested.
List of changes v13 - Synchronization with cm10.1. - New code uses MBM implementation (A501) (not verified). - Updated Audio Hal. - Fixed audio pulse. - Updated codecs. - New option in the menu to force the inclusion of HDMI 720p. - Updated Power Hal. - New trebuchet with tablet mockup. - Mounting data / system, even if not ext4 or btrfs. - Added application task manager. - The core of the T42. - Ability to use external SD cards as storage for applications and media. v12 - Synchronization with CM10.1. - New code uses mbm implementation of v4 (a501). - Updated Hal audio. - Tweaks user interface for tablets. - Tviki egl. - Tweaks brightness. - Fixed resizing of HDMI to 720p. - Now work headphones with a microphone. - Fixed signal location when icon scaling is enabled. - Fixed fatal errors of multi-user settings. - Transition to the new T33 core (3.8.13.2 core) - New oc with new voltage interface. - Gpu oc. - Optimize memory management. - Optimization linaro 05.13 - gold linker. - Ported io sched sio, vr, zen and row (by default) fully updated. - Aroma updated to 2.56. v11 - Synchronization with cm10.1. - Open source implementation of MBM is back * (not sure if it works) - Updated Audio Hal. - Updated Power Hal. - New installation starts by default with the user interface of the tablets. - Consolidated implementation of the tablet interface. - EGL tweaks. v10 - Synchronization with cm10.1. - New core ?? t28. - Circular management. - A few more options. v9 - Synchronization with cm10.1. - New core ?? T27. - Adjust the sound volume switches (Settings->sound). - Custom navring actions (Settings->navigation buttons->quick launch shortcuts). - The option to scale the icons of the tablet statusbar (Settings->System->StatusBar->Scale status bar icon). - Advanced reboot menu in developer settings. - Supports Ext4 SDCard / USB Stick. - Settings for the notification panel for the tablet status bar. - Linaro optimized ROM. - Improved performance. v8 - Synchronization with CM10. - Android 4.2.2 - New network attributes. - The new core ?? 7.3.7 - t26. - Implementation of USB Audio. - Fixed Bluetooth MAC address. - Small fixes for HW codecs. - EGL tweaks. v7 - Synchronization with CM10. - Fixed a frivolous bar status error. - Implemented full hw codecs. - Fstab and Sysctl optimization. - Fixes for capacitive styluses. - Improved sensor response. - A headset plugin is displayed in the notification panel. - Experimental support for ExFAT with automounting. - Implemented tegraowners settings menu. - Updated audio hal. - Updated t25 kernel (7.3.6). - Updated rotation lock switch code. - Added compatibility with custom GAPPS. v6 - Public release - Fixed Bluetooth. - Fixed audio. - Fixed dpi settings / - New core. v1-v5 - Development Installation Procedure • Install the firmware. • Install GAPPS. • Reboot. How to enable the tablet interface 1. Settings ->System ->Status bar ->Tablet UI ->Tick. 2. System ->Hardware buttons ->On custom actions ->Tick. 3. System ->User interface ->Dual pane preferences ->Always. 4. Settings ->Desktop->Main screen ->Search line ->Uncheck the box. 5. Settings ->Desktop->The bottom panel ->Show dock ->Uncheck the box. 6. Long press on the desktop ->Actions ->Applications->Move it to the right corner: lol: 7. Everything! How to enable developer and performance options 1. Settings->About Tablet PC ->Tap on the assembly number several times until they appear :) 2. Everything! >If you collapse the keyboard as you type.<>If you have problems installing V12.<
Android 4.1.2 - Jelly Bean:
Firmware from thor2002ro v12-27 (extreme release of 06/10/13) List of changes v27 - The last core 3.8 with overclocking cpu and gpu. - Reduced internal microphone noise. - Fixed external microphone. - Fixed ignoring screen turning off by some applications. v26 - Automatic vold correction. - Automatic ext4 mount. - Kernel 3.8.11 (including various fixes included by oom adj perms). - Fixed cpufreq perms to dovernor changes. - Fixed zram perms. v25 - Fixed automount external SD / USB. - Included latest kernel updates (fixed ov camera) - Improved Hal power settings. - Changed Hal audio (fixed first frame loss). v24 - Many stability / performance fixes. - Fixed idle sensor around the edge of the screen ?? Trebuchet. - The core 3.8 core is turned on (without oc). v23 - Synchronization CM10. - New kernel 7.3.4. - Updated Linaro compiler. - Updated Hal audio. - Updated codecs. - Added new menu TegraOwners with an increase in the level + switch of free RAM in the bar + large button Clear all. - Updated turn lock switch. v20 - New kernel ?? 7.3.1 (on top of 3.7 rc6). - CM10 sync. - The source is built entirely with Linaro compiler and optimization. - Removed the menu item transfer status bar status up, as this function does not work. - Edited Fstab. - During the download, there will be an attempt to fix the data / cache partitions, if they received errors (this may take a long time during the initial loading, wait). v18 - new kernel 7.3 (more stable than 3.7-rc4 kernel) - Updated CM10 sync. - Updated ramdisk. - Fixed codecs. - Fixed WiFi AP. v17 - new kernel 6.3 (more stable than kernel 3.6.5). - Updated CM10 sync. - Updated ramdisk. - HAL features introduced, so we bypass the interactive management of boostpulse. - Optimize loading animation. - Fixed double keyboard switch in status bar. - Updated audio hal. - New NVIDIA HW codecs. v15 - Possible kernel fix for buttons on A501. - Fixed a quick launch setting that was not displayed. - Mass Storage mode works. - Upgrade to Android 4.1.2. v14 - Updated Hal modem for A501. - New 6.1 kernel - The button “Stop all applications†and “Free RAM†has been added to the list of recently opened applications. (switching in the system->status bar->latest applications panel) - Updated OC GUI for new kernel. - Audio Hal: fix blocking with HDMI connection / disconnection. - Increase the sensitivity of automatic brightness. - Removed PPPWidget, you can get it from Google Play. - Added option to inherit Play Store. v12 - new kernel ?? 5.1 updated audio hal. minor changes to webkit. Fixed support for Huawei USB modem. Updated Aroma Installer. Updated PPPWidget0.99. v10 - Updated kernel to version 3.5.2. - fixed HDMI Audio. - Support 3G and GPS for the A501. - Fixed drive menu (missing Mass Storage). - Full build includes the linux wireless package. - New Wi-Fi driver (bcmdhd). - Fixed VPN. - Added PPP Widget. - Updated CM build. v9 - internal test assembly A501. What works • Sensors. • USB. • Internal / external drives. • HDMI. • Vibration. • WiFi. • Bluetooth. • 2D HW acceleration. • 3D hardware acceleration. • Audio, headphones and microphone. • GPS. • H / W codecs. • USB binding. • Hardware lock rotation. • Camera. • Video camera. • Core 3.6.1. • Flash application. • HDMI sound. • Support A501. • Supports Huawei USB 3g modems.
Android 4.0.4:
- TegraOwners Rom fromdeman & thor2002ro- Support for old and new bootloader
- Taboonay fromvache- Support only new bootloader
- PreBuild ICS fromshchers - Support only new bootloader
Android 4.0.3:
- Falcon rom fromfguy - Support only new bootloader
- Evil alex unleashedfromMoscowDesire- Support only new bootloader
- Acer_AV041_A501_1.014.00_WW_GEN1 frompaul-xxx - Support only new bootloader
- Transformer Tab A501 frompaul-xxx - Support only new bootloader
Kernels, loaders Kernel for firmware 4.0.3 based on the official firmware: Kernels for firmware 4.2, 4.1.1 JB from THOR and digetx - Kernels are updated frequently, follow the link and see the last -mediafire
Manuals, instructions, guides - Installation instructions for unlocked ICS bootloader for A501.
- Installing a new v7 Boot Loader and Touch Recovery v1.7.3
- Easy way to install any recovery and bootloader on Acer Iconia Tab A500 and A501
- New UnBrick fast & slow (or ReFormat) for Acer Iconia Tab A500 / A501
- How to install the firmware, how to roll back, etc.
- Instructions for getting root on Acer Iconia Tab A100 and A101 tablets with new ICS firmware
- One of the ways to restore broken sectors.
- Method of restoring a tablet with a problem memory.
- Tips for beginners fromfguy
- For those who have problems with MegaFon read - instructions.
- What to do with the code from the megaphone.
- Unlock Acer A501 from the operator. Instructions how to unlock A501 without programs and money
- How to deal with the error "unexpected stop of the com.android.vending process", closing the Market.
- Especially for those who are not lucky at all
A simple way to get root rights. 1. Download the attached archive to the Win computer - ICS_rooting_A10x_A5xx.zip(863.26 KB) and unpack it at any convenient place on your hard disk. 1a. For Linux users: In the archive above there is a script and executable files to run from under Linux systems. Startup script runit-linux.sh. Then everything is the same. Understand. 2. The tablet should already be flashed with ICS firmware 3. On the tablet, go to "Settings" ->"Applications" ->"Development" ->put a tick in front of the item "Debug USB". 4. Install the driver for the tablet on the Windows, if necessary, and connect the tablet to the computer. Driver look here. 5. Open the directory with the unpacked archive in Windows Explorer. Double click on the file runit-win.bat. Further we act according to the displayed messages.
How to make a hard reset if you can not log into the operating system 1) Turn off the tablet; 2) Move the screen lock lever to the left position; 3) Hold down the volume up key (that part of the volume rocker that is closer to the lock lever) + the power key; 4) As soon as the tablet vibrates, release the power key and move the screen lock lever to the right and left until you see exactly these 2 lines on the screen Erasing Userdata ... Erasing Cache ... At the same time, you must continue to hold down the + volume button; 5) In the upper left corner will appear the lines of the beginning of formatting; 6) The tablet is turned on clean and formatted, as if only from the store.
New bootloader firmware without data loss, without PC, without CPUID and without SBK
How to format the internal memory of the tablet, if installed CWM 1.7.3 1. Go to CWM 2. Go to "Backup and Restore" 3. Select "Toggle backup and restore of internal storage (/ data / media)", it will show Enable. 4. After we go to "Mounts and Storage" ... and press "format / data"
Resuscitation Tablet Recently, users often "died" tablet. I have never had such a thing. Detailed instructions - Acer ICONIA TAB A501 - Firmware (Post # 14051626) !!! please author, he tried, and I think he deserves it
Theory (CWM, UID, CPID, bootloader ClockWorkMod Recovery:How to use?To enter Recovery, turn off the tablet, hold down the "Volume-" and "Power" buttons. How to use, read ClockworkMod recovery FAQ Loaders:What is a bootloader? Bootloader (bootloader) - some system software that provides the loading of the operating system immediately after turning on the tablet.
How many loaders can I install? Two total loaders - new (ICS) and old (HC)
What do the two abbreviations HC and ICS mean? HC is short for Honeycomb, i.e. So called the old bootloader for our device ICS is short for Ice Cream Sandwich, i.e. so called new bootloader for our device
New bootloader, where did it come from? In official firmware 4.x, Acer changed the bootloader to a newer and more secure one. Some time later, after leaks of firmware for the A500 leaked to the network, the gurus with XDA found a vulnerability in this bootloader and successfully hacked it. Now users have a new bootloader with unlocked mode Fastboot.
And where did the old bootloader come from? Used by Acer in Honeycomb firmware. Standard flashed into your tablet (if you have 3.0.1).
Should I change the bootloader? The choice is only yours. This is recommended because Acer leakage firmware works better with the new bootloader. Now TegraOwners ICS Rom is for the new bootloader. CPUID, SBK:What is UID / CPUID?This is a number that identifies your tablet. What does the CPUID look like?This number looks like this: Why CPUID, and not just UID?Because it is for the program rollback / firmware new loader CPUID is required (a more precise definition). He never changes. In Android Honeycomb it is also UID, and in Android Ice Cream Sandwich UID it becomes SNID (serial number) Why is it important to know your CPUID?Because if you know the UID - you can restore your tablet after losing EVEN Recovery. All thanks to the utility from Acer for firmware on 3.0.1 2 new ways to find out the UID if you have ever connected your tablet to a PCMethod number 1 (If it was detected as a mobile device / player)1. Open regedit.exe (Win + R) 2. Go along the following path: - HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows Portable Devices \ Devices \ 3. We are looking for the folder "USB # VID_xxxx & PID_3345 # ***************" 4. Where "**************" - UID without 0 at the beginning. Method number 2 (If it was detected as a device in principle)1. Open regedit.exe (Win + R) 2. We go on 1 of the following ways: HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ AutoplayHandlers \ EventHandlersDefaultSelection \ HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ AutoplayHandlers \ KnownDevices \ HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ AutoplayHandlers \ UserChosenExecuteHandlers \ HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ AutoplayHandlers \ DeviceHandlers \ 3. We are looking for the folder "WpdDeviceHandler_USB # VID_xxxx & PID_3345 # ***************" 4. Where "**************" - UID without 0 at the beginning. If the above methods did not help, we pass by reference. To determine your SBK, we pass on - reference. Firmware and Repair with Afterota Afterota[PC] [gersma] [06/18/2012]ATTENTION!!! The author of this program is not responsible for damage!To use this utility, you will need:- PC on Windows: XP / Vista / 7/8
- usb cable for tablet
- Acer ICONIA Tab A50x / Packard Bell Liberty Tab G100W
The program has several tabs:- Info - tablet status (serial number, sbk, cpuid, recovery, bootloader, etc.). Also from this menu you can install the driver.
- Stock - rollback to stock firmware
- Standart
- Advanced - some buns
- About - about the program
Opportunities:- automatic sbk calculator
- saving sbk for future processes
- firmware download and recovery with one click
- flashing custom loaders and recovery with one click
- returning the tablet to the stock honeycomb firmware using the update.zip method
- tablet recovery (in APX Mode)
- getting root rights
- kernel firmware
- etc.
Screenshots:[attachment = "1760638: afterota.jpg"] Changes:v1.0804/06/2012
- Fixed the program
- Added v8 bootloader
v1.0704/06/2012
- Afterota now works on all devices: A500, A501, G100W
- new method of obtaining information
- added a couple of exceptions
- the program can install the ics downloader on the HC firmware now(clumsily translated)
- the program is simplified for convenience
- now the program works on winxp and vista
v1.0631/05/2012
- fixed loader definition (again)
- Lite version added
- Added v7 bootloader from scrilax
V1.0531/05/2012
- fixed loader definition
v1.0431/05/2012
- kernel firmware exception
v1.0330/05/2012
- changed layout a bit to hold more information
- id
- checking the ics version for flashing the correct kernel
- program runs only on windows 7
- uac warning is shown, uac sometimes crashes nvflash
v1.0229/05/2012
- Removed auto-reboot after rutting tablet
- recovery version updated to v1.73
- the program displays a warning if there is nothing in the file containing the serial number, cpuid, sbk
- Added code to disable the "install-recovery.sh" script
v1.0128/05/2012
- what is the situation?
- when hc rom is detected all ics bootloader & kernel flashing is disabled
- except for the bootloader flashing is disabled, except for the rom rom is detected
- cusato by sugested by civato.
v1.00 User Reviews:Rusviking @ 06/07/2012, 11:00 Bootloader V7 I downloaded via Afterota v1_07 without lost data !!! Download links:Original: XDAThe program is in English! Let's ask the author to translate into Russian !!!K New version released, but not updated post? tell me pmor in QMS! - Downloadfull version of the utilityAfterota
- Unpack the archive with the program in any place you like
- Run the programas administrator(if aWindows 7)
- If you do not have a driver for the tablet installed, install it by clicking "Install Driver"
- Connect your tablet to your PC with a usb cable.bundled. The tablet must be turned on, insettings-applications-development-debugging via USBthere should be a tick (if 3.x firmware), atsettings-for developers-debug on USB should be ticked (if 4.x firmware)!
- If everything was determined correctly - in cell Infoyou will see your:
- Serial- serial number
- Cpuid- cpuid, more in theory
- SBK- the number that is generated from cpuid
- Build- firmware installed in your tablet
- Bootloader- bootloader installed in your tablet
Then you will do what you need.
To installnew bootloader and CWM, without data loss: Open the tabStandart, choose any item containingBootloader icspush in front of himInstall. If you do not know which item to choose - the recommended itemBootloader Ics + Thor Recovery v1.7.3. To installold bootloader and CWM, without data loss: Open the tabStandart, choose itemBootloader Hc + Thor Recovery v1.7.3push in front of himInstall. Install the boot loader and recovery, which are not in the program,no data loss:Open the tab Advancedsee section Custom recovery, Custom bootloader. Select in the program your recoveryand your bootloaderby clicking Browse. After selecting, press InstallRestore the tablet after unsuccessful actions, with its bootloader and recovery,no data loss:Open the tab Advancedsee section Unsoftbrick. Select in the program your recoveryand your bootloaderby clicking Browse. After selecting, press InstallFull rollback to firmware 3.0.1,no data loss:Open the tab Stock, click on the A50x. You will have: - official recovery
- official firmwarein English
- official downloader
Further, if you like to flash the official firmware 3.2: - Downloadarchive with firmware, unpack it, get itupdate.zip
- Copy update.zipto root micro sd memory card
- Turn off the tablet, hold down the buttonsVolume-andNutrition
Now you have official firmware 3.2, and if it hasn’t been 1 year after purchase - the official guarantee. You can safely carry the tablet to the service center, but before that do not forget to clean the memory. There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedsnekt - 11.03.17, 20:32Reason for editing: editing |