All data on the phone when the procedure flies, finally get the phone as if just out of the box, at the stage of the initial setup!
1. Register online
http://www.htcdev.com/ 2. Once registered, go to
http://www.htcdev.com/bootloader/ Right click in the window
"Select Your Device" and at the bottom of the list that appears, select
"All Other Supported Models" and push the button
"Begin Unlock Bootloader" 3.
Yes, Tick both Boxes, Proceed put two ticks, we agree.
Then download files for buta firmware (choosing Microsoft Windows, as shown in the image below)
Then unpack them in the "android" folder (without the quotes), for example on a hard disk C. Thus, the address of the folder in which will be unlocked, is - C: \ android
4. To enter
Fastboot . Once you are in Bootloader - make sure that there is an inscription in the upper bar of the phone "
FASTBOOT USB ".
If such labels do not have - so no drivers installed, the phone does not have a connection to a PC.
5. On the PC - go to the desktop, press the keys simultaneously
WIN (Windows icon) and
R . In the opened window, put this command
We confirm button
Enter Then in the command line, enter
Do not close the command line, we still need it.
6. Once again, we check that the folder C: \ android We have files that we downloaded earlier to HTC Dev site
7. We continue to work on the command line, prescribes
fastboot oem get_identifier_token
8. Select and copy text as shown in the image.
To copy the text you need to click on the console right-click and selectmark The left mouse button to select the text code came on the selected text, press the right mouse button, all the text is now copied 10. Insert the obtained ID in the suggested field and confirm
submit 11. Checking and downloading from above your post
"Unlock_code.bin" and save it in a folder with other files
(C: \ Android) 12. Enter the text on the command line
fastboot flash unlocktoken unlock_code.bin
13. The display on your phone, change, then you must press the "Vol +" and confirm by pressing the power button.
14.Po completion yank the cord out of the socket.
15. Next install kernel and recovery. Description of the installation can be found in any firmware or in the links below.