Huawei E352 - Discussion | Discussion of the wireless modem Huawei E352
DiscussionHuawei E352
Discussion |Firmware|FAQ
stillHuawei E352 - Discussion (Post Daniel2016 # 69824347)
Post has been editedAndrewP_1 - 18.03.19, 09:46
Discussion |Firmware|FAQ
AT commands for modem
AT ^ SETPORT?
- Display current configuration
AT ^ GETPORTMODE
- Display currently active mode
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2"
- Set default configuration
AT ^ SETPORT = "A1, A2; 1,2,3,7"
- Disable CD + SD
AT ^ SETPORT = "A1, A2; 1,2,3, A2"
- Disables NDIS and CDROM - only a modem and a flash drive remain
AT ^ SETPORT = "A1, A2; 1,2,3"
Only modem
AT ^ SETPORT = "A1, A2; 2.7" - Disable CD + SD + modem set in Win7
only NDIS mode
AT ^ SETPORT = "A1; 2.7"
- CD + NDIS
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2,4,5,6, A, B, D, E"
Same default reset
AT ^ SETPORT = "A1, A2; 1,16,3,2, A1, A2" - will be the default value
- Display current configuration
AT ^ GETPORTMODE
- Display currently active mode
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2"
- Set default configuration
AT ^ SETPORT = "A1, A2; 1,2,3,7"
- Disable CD + SD
AT ^ SETPORT = "A1, A2; 1,2,3, A2"
- Disables NDIS and CDROM - only a modem and a flash drive remain
AT ^ SETPORT = "A1, A2; 1,2,3"
Only modem
AT ^ SETPORT = "A1, A2; 2.7" - Disable CD + SD + modem set in Win7
only NDIS mode
AT ^ SETPORT = "A1; 2.7"
- CD + NDIS
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2,4,5,6, A, B, D, E"
Same default reset
AT ^ SETPORT = "A1, A2; 1,16,3,2, A1, A2" - will be the default value
Where to enter the code?
It is necessary that on the computer where the modem is inserted there was a terminal program. This may be HyperTerminal (it was included in the standard program in XP) free PuTTY, SecurCRT, etc. - we search on the Internet, download set.
Next, we look in the Windows hardware, which (by number) COM ports determine the modem. There will be "PC UI Interface" and "Application Interface". Connect the terminal program to the COM port by the number corresponding to the "PC UI Interface". Type ATZ in the terminal window and hit enter. If done correctly, the answer should be OK.
Now, in the same window, you can drive unlock commands and commands for toning to see the status (locked or not and how many attempts are left).
AT ^ CARDLOCK? Check blocking and number of attempts.
in response, the modem will issue
CARDLOCK: A, B, 0
A ->2- means that there is no simlock, 1- if the modem is locked
B ->The number of remaining unlock attempts. The new modem = 10
AT ^ CARDLOCK = "nck code" Unlocking
AT ^ CARDUNLOCK = "nck md5 hash" Reset attempts to 10
Next, we look in the Windows hardware, which (by number) COM ports determine the modem. There will be "PC UI Interface" and "Application Interface". Connect the terminal program to the COM port by the number corresponding to the "PC UI Interface". Type ATZ in the terminal window and hit enter. If done correctly, the answer should be OK.
Now, in the same window, you can drive unlock commands and commands for toning to see the status (locked or not and how many attempts are left).
AT ^ CARDLOCK? Check blocking and number of attempts.
in response, the modem will issue
CARDLOCK: A, B, 0
A ->2- means that there is no simlock, 1- if the modem is locked
B ->The number of remaining unlock attempts. The new modem = 10
AT ^ CARDLOCK = "nck code" Unlocking
AT ^ CARDUNLOCK = "nck md5 hash" Reset attempts to 10
Useful:
HUAWEI Modem 3.0- Firmware (Dashboard) and program (Soft) modem management with customized profiles for many telecom operators.
Bin files for TP-link MR3220 to make friends with Huawei E352
Only Modem Mode & Connection to WinCE6
Modem unlocking
Huawei E352 - Discussion
Voice Firmware
Voice activation - ONLY on the E352B !!!! (Firmware: 21.158.23.00.209)
How to change imei to e352
Resuscitates iodem from MDM6600
HiLink firmware for e352b
Bin files for TP-link MR3220 to make friends with Huawei E352
Only Modem Mode & Connection to WinCE6
Modem unlocking
Huawei E352 - Discussion
Voice Firmware
Voice activation - ONLY on the E352B !!!! (Firmware: 21.158.23.00.209)
How to change imei to e352
Resuscitates iodem from MDM6600
HiLink firmware for e352b
Post has been editedAndrewP_1 - 18.03.19, 09:46
Reason for editing: HiLink firmware for e352b
MontС‘r @ 03/02/2012, 18:36
Good day. Who thread met with this? Who can say what? ATP.
What exactly interests? Ask specific questions.Huawei E352 MegaFon refers to the new line of 3G modems (E353, E363, E367, E372 ...), a slightly simplified analog Huawei E353 MTS who in turn is the younger brother Huawei E367 . It supports data reception speed up to 14 Mbit / s, has a plug for an external antenna, is based on the processor MDM6200. AT commands differ from the old ones, voice functions (voice) are not supported and at the moment there is no possibility to activate them. All the above models of modems are initially locked (blocked to work in the network of one operator), there are currently no free solutions for unlocking, calculators that are posted on the network do not work on them, but there are inexpensive paid unlock methods. On this issue in more detail I will consult in a personal or profile contacts.
Good day! Can someone tell me how to set up the E352 Megaphone to work with a car head on Win CE6.0, or rather, will the Huawei E1550 drivers fit?
What is wrong doing?
I'm trying to screw the subject to the Toshiba AC100 (117).
It is required to transfer the unit to the modem only mode.
In the terminal
AT ^ SETPORT = "A1, A2; 1,2,3"
The answer is OK.
Checking status
AT ^ SETPORT?
Answer
A1, A2; 1,2,3
That is only a modem.
On any computer, when turned on in USB, the program starts to start the program for installing the software.
And through the conductor you can see the CD-Rom of the modem (you can copy files).
The installation passes.
And all sabzh devices (except modem) disappear from the system.
So all the same, the flash drive and CD are not disabled?
How to cut them offFOREVER AND EVER ?
For Android is not friendly with composite devices.
Operator Megaphone.
I'm trying to screw the subject to the Toshiba AC100 (117).
It is required to transfer the unit to the modem only mode.
In the terminal
AT ^ SETPORT = "A1, A2; 1,2,3"
The answer is OK.
Checking status
AT ^ SETPORT?
Answer
A1, A2; 1,2,3
That is only a modem.
On any computer, when turned on in USB, the program starts to start the program for installing the software.
And through the conductor you can see the CD-Rom of the modem (you can copy files).
The installation passes.
And all sabzh devices (except modem) disappear from the system.
So all the same, the flash drive and CD are not disabled?
How to cut them offFOREVER AND EVER ?
For Android is not friendly with composite devices.
Operator Megaphone.
Dear, who in the subject, tell me how to configure the E352 for Android 4.0.3 ??
I bought a tablet Ainol Novo 7 Elf. I can’t set up a modem for it (((The modem only switched to modem mode and then I can’t do anything (((
I bought a tablet Ainol Novo 7 Elf. I can’t set up a modem for it (((The modem only switched to modem mode and then I can’t do anything (((
[email protected], 08:49
Announce the codes for translating tsukki in only modem
These are not suitable?
Only GPRS / EDGE - AT ^ SYSCFG = 13,1,3FFFFFFF, 2.4
Only 3G / WCDMA - AT ^ SYSCFG = 14,2,3FFFFFFF, 2.4
Prefer GPRS / EDGE - AT ^ SYSCFG = 2,1,3FFFFFFF, 2.4
Prefer 3G / WCDMA - AT ^ SYSCFG = 2.2,3FFFFFFF, 2.4
Device in modem only mode - AT ^ U2DIAG = 0
Device in modem + CD-ROM - AT ^ U2DIAG = 1
Modem Mode + CD-ROM + Card Reader - AT ^ U2DIAG = 255 or AT ^ U2DIAG = 276
Modem Modem + Card Reader - AT ^ U2DIAG = 256
Only 3G / WCDMA - AT ^ SYSCFG = 14,2,3FFFFFFF, 2.4
Prefer GPRS / EDGE - AT ^ SYSCFG = 2,1,3FFFFFFF, 2.4
Prefer 3G / WCDMA - AT ^ SYSCFG = 2.2,3FFFFFFF, 2.4
Device in modem only mode - AT ^ U2DIAG = 0
Device in modem + CD-ROM - AT ^ U2DIAG = 1
Modem Mode + CD-ROM + Card Reader - AT ^ U2DIAG = 255 or AT ^ U2DIAG = 276
Modem Modem + Card Reader - AT ^ U2DIAG = 256
Not. I used both the terminal and the utility. Writes the same error.
I'd like to turn the whistle to Toshiba AC100.
Help!
I'd like to turn the whistle to Toshiba AC100.
Help!
Attached images
 |
Another option.
AT ^ SETPORT?
- Display current configuration
AT ^ GETPORTMODE
- Display currently active mode
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2"
- Set default configuration
AT ^ SETPORT = "A1, A2; 1,2,3,7"
- Disable CD + SD
AT ^ SETPORT = "A1, A2; 1,2,3, A2"
- Disables NDIS and CDROM - only a modem and a flash drive remain
AT ^ SETPORT = "A1, A2; 1,2,3"
Only modem
AT ^ SETPORT = "A1, A2; 2.7" - Disable CD + SD + modem set in Win7
only NDIS mode
AT ^ SETPORT = "A1; 2.7"
- CD + NDIS
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2,4,5,6, A, B, D, E"
Same default reset.
- Display current configuration
AT ^ GETPORTMODE
- Display currently active mode
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2"
- Set default configuration
AT ^ SETPORT = "A1, A2; 1,2,3,7"
- Disable CD + SD
AT ^ SETPORT = "A1, A2; 1,2,3, A2"
- Disables NDIS and CDROM - only a modem and a flash drive remain
AT ^ SETPORT = "A1, A2; 1,2,3"
Only modem
AT ^ SETPORT = "A1, A2; 2.7" - Disable CD + SD + modem set in Win7
only NDIS mode
AT ^ SETPORT = "A1; 2.7"
- CD + NDIS
AT ^ SETPORT = "A1, A2; 1,2,3,7, A1, A2,4,5,6, A, B, D, E"
Same default reset.
Thank you, Justmoose! Modes are switched by commands from the second post! Further ambush, in the activation of firewood for Toshka: did everything as described in acc. A branch, but the modem does not see the smartbook. Whether to a new hawai firewood is needed new, or something I messed up with the parameters when I activated them. Well, I will dig further.
Once again, I am very grateful for the help!
Once again, I am very grateful for the help!
VolderX @ 04/09/2012, 2:07 PM
Who knows what can be unlocked for him to eat all the sims?
DC Unlocker for 7 evrov
I didn’t like the modem — the network shows two or three divisions, but the transmission doesn’t go, everything costs zeroes. Only the reconnection helps. There was no such problem on the old modem (E1750).
VolderX @ 05.05.2012, 15:46
And how to enter AT commands for a modem? ;)
Huawei - FAQ
Post has been editedJustmoose - 05.05.12, 14:57
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement