Digma iDx9 - Firmware | Digma iDx9, iDx9 3G
Updater_Drivers.zip
Android_SDK.exe
User_Manual.pdfI can not understand why using the mouse, the tablet reboots constantly. Without a mouse all the rules, and with the mouse while reloaded from time to time. 3 changed the firmware, all the same. There is a solution?
Post has been editedDavulik - 21.11.15, 18:00
Post has been editedDavulik - 21.11.15, 18:00
Correct, please reference to the official firmware, and now they are herehttp: //www.ddixlab.com...x9_3G_HWVer1_512M_RAM/
oyaebu @ 20.02.2016, 15:56
As far as I understand the drivers for Win10 and never will be. Please tell me what to do.
Post has been editedkadabra10 - 20.02.16, 16:59
After installing this firmware hereDigma iDx9 - Firmware (Post kadabra10 # 23813136)It happened here such byaka
how to fix? Neither vayfay no bluetooth no longer plow
 |
kadabra10 @ 05.06.2016, 13:13
Dimass153, Sliders not twitch? Set of instructions, formatting and wipe?
Firmware for your device to take? More than 3 years have passed and I do not remember the nuances. There are gigs, there are 512 and more with and without 3g
Post has been editedkadabra10 - 05.06.16, 13:30
Post has been editedkadabra10 - 05.06.16, 13:30
Dimass153, I was the same, there were no problems. Check the correctness of the downloaded firmware, knitted alter the instructions. Or rolled back to the drain. Here the other is not given. But, and here blyutuza physically there. Slider inherited settings :) is port
Post has been editedkadabra10 - 05.06.16, 16:06
HELP
After flashing the tablet no longer included, only while holding POWER loading comes to a black screen and hangs
After flashing the tablet no longer included, only while holding POWER loading comes to a black screen and hangs
Digma IDX9 3G - does not turn on
Firmware пїЅ
Hit me tablet Digma iDX9 3g, with the diagnosis does not catch internet. In fact it does not turn on Wi-Fi. After some dancing with a tambourine flashed firmware MVM908HWZ 20,120,221 V1.0.11 Android 2.3.1. Involved, including Wi-Fi access point I found connected to it, and bam ... turned off. Further, tried several times to turn it on, the screen saver appears Digma and after 10-15 seconds cut down. After 3-4 attempts to incorporate it more on what does not react.
Method firmware was such unsolder the battery charge, connect it to a computer via USB, the power to hold down the Reset Reset hold 5-6 seconds, release, and it appears in the system, then the instructions.Digma iDx9 - Firmware
As it is now revive it?
Post has been editedro-bot47 - 10.08.16, 10:06
Firmware пїЅ
Hit me tablet Digma iDX9 3g, with the diagnosis does not catch internet. In fact it does not turn on Wi-Fi. After some dancing with a tambourine flashed firmware MVM908HWZ 20,120,221 V1.0.11 Android 2.3.1. Involved, including Wi-Fi access point I found connected to it, and bam ... turned off. Further, tried several times to turn it on, the screen saver appears Digma and after 10-15 seconds cut down. After 3-4 attempts to incorporate it more on what does not react.
Method firmware was such unsolder the battery charge, connect it to a computer via USB, the power to hold down the Reset Reset hold 5-6 seconds, release, and it appears in the system, then the instructions.Digma iDx9 - Firmware
As it is now revive it?
Screenshots
 |
Post has been editedro-bot47 - 10.08.16, 10:06
Version axes: Win10 x64
Digma iDx9: 512MB RAM, without 3G.
http://i.imgur.com/MuFiaGN.png
Decided to flash the tablet to Android 4.0.3 offs. insertion of the caps in the subject and stoknulsya a huge challenge. When connecting the included tablet PC and clamping igolochkoj button "Reset" the plate for 2-3 seconds was designated as an unknown device in the section "USB-device" (see. Screenshot below).
http://i.imgur.com/cMZR7Ch.png
I tried to install the wood with the help of the manual:DNS AirTab M100 / M100G - Official firmware (OS 4.1.1)
Windows did not want to set the wood on this unknown USB-device. Checking certificates signature at this point has been turned off.
Until then, I tried to install the drivers via DriverInstaller.exe. After successful installation (a message in the window) I connect the tablet to the PC and everything remained as it was :(
Digma iDx9: 512MB RAM, without 3G.
http://i.imgur.com/MuFiaGN.png
Decided to flash the tablet to Android 4.0.3 offs. insertion of the caps in the subject and stoknulsya a huge challenge. When connecting the included tablet PC and clamping igolochkoj button "Reset" the plate for 2-3 seconds was designated as an unknown device in the section "USB-device" (see. Screenshot below).
http://i.imgur.com/cMZR7Ch.png
I tried to install the wood with the help of the manual:DNS AirTab M100 / M100G - Official firmware (OS 4.1.1)
Windows did not want to set the wood on this unknown USB-device. Checking certificates signature at this point has been turned off.
Until then, I tried to install the drivers via DriverInstaller.exe. After successful installation (a message in the window) I connect the tablet to the PC and everything remained as it was :(
Attached images
 |
 |
sxFeliXxs, Well, you raise your eyes. a pair of top posts http: //savagemessiahzine.com/forum/index.php?s=&showtopic=312393&view=findpost&p=47285550 Not found search ... Does HDMI input on? Thanks! ... or a cheap tablet with the input Headey happens?
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement