> Attention!

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Texet TB-840HD | TFT color



Rep: (1248)
DiscussionteXet TB-840HD
Discussion пїЅ | Description

Firmware:


Post has been editedvadeus - 28.11.17, 12:30
Reason for editing: firmware files



Rep: (1)
Maximus55 @ 03.08.2012, 14:08*
Rebuilt firmware RBK-470_fw_4gb_120215 (replaced touchpad driver texet`ovsky). Everything fell, passed calibration - works. As long as the flight is normal, continue to accomplish your goal.
The touchscreen responds quickly after proshiki by Texet -very pleasant.

Later I will try to do so = the firmware from Effire.


That is done with the firmware on TR801 (a). All ask the book opens, the video turns. As well as the firmware of the RBK-470 book to become more responsive, fast, no problems with flipping. As long as the flight is normal, I will testit further.
I put all that modified (replaced stitch driver texet`ovsky). Help test.

Attached files

Attached fileTR801a_TB840HD_v1.img(24.78 MB)


Post has been editedMaximus55 - 03.08.12, 12:04



Rep: (1)
I did the same thing with effireColorBookTR801b, MrBookFrank20120208, rbk-470_fw_4gb_20110914 - everything works, not only books otkrvaet "error opening the file." In general, as long as an alternative only ask effireColorBookTR801a spoofing touchpanel.drv.



Rep: (46)
Nevtutor
Interesting . If I understand correctly, the mirror was rotated on a vertical image is observed only during the reading?

Maximus55
If you want you can see a comparative overview (link:effire ColorBook TR801 (Post # 12809224)), Because I have the opposite (in TR-801 firmware worth of TB-840HD). In addition to it over time, I might add that in spite of the fact that the batteries are the same (2800mA * h), the firmware of the 840-th battery recharge constantly trying, because of what likely some users especially "Ritmix RBK- 470 "they broke down, most likely other data in power.drv driver (not calibrated the battery), according to this 840th firmware 801 should then not reloaded.
If you can specify which of the TR-801 firmware you name (a) and (b).
Interestingly another thing: when replacing the firmware on the firmware from another manufacturer you are replacing a driver on the touchscreen teksetovsky and you at this response to the press becomes more adequate, so this should be concluded that the problem lies not in teksetovskom stitch driver.



Rep: (1)
GOLDEN ALEX @ 03.08.2012, 18:24*
Nevtutor
Interesting . If I understand correctly, the mirror was rotated on a vertical image is observed only during the reading?


While reading. And all the menus, TEXET inscription at boot time, in general, any texts and lettering system.



Rep: (1)
GOLDEN ALEX @ 03.08.2012, 23:59*
Maximus55
If you want you can see a comparative overview (link: effire ColorBook TR801 (Post # 12809224)), because I have the opposite (on the TR801 worth firmware of TB-840HD). In addition to it over time, I might add that in spite of the fact that the batteries are the same (2800mA * h), the firmware of the 840-th battery recharge constantly trying, because of what likely some users especially "Ritmix RBK- 470 "they broke down, most likely other data in power.drv driver (not calibrated the battery), according to this 840th firmware 801 should then not reloaded.
If you can specify which of the TR-801 firmware you name (a) and (b).
Interestingly another thing: when replacing the firmware on the firmware from another manufacturer you are replacing a driver on the touchscreen teksetovsky and you at this response to the press becomes more adequate, so this should be concluded that the problem lies not in teksetovskom stitch driver.

Firmware "a" - Firmware 1.0 for e-book ColorBook TR801 (for books with serial numbers TR80120120400001-TR80120120405050 and TR80120120500001-TR80120120502020).
Firmware "b" - Firmware 1.0 for e-book ColorBook TR801 (for books with any serial numbers except TR80120120400001-TR80120120405050 and TR80120120500001-TR80120120502020).
They're at the office. EFFIRE website when downloading so named.

Learn to what is the difference between these devices seriyynymi numbers TR80120120400001-TR80120120405050 and TR80120120500001-TR80120120502020 and others, then it may be clear why it became only 840HD firmware from "a" to read books.

Post has been editedMaximus55 - 04.08.12, 06:09



Rep: (16)
Maximus55 @ 03.08.2012, 11:06*
That is done with the firmware on TR801 (a). All ask the book opens, the video turns. As well as the firmware of the RBK-470 book to become more responsive, fast, no problems with flipping. As long as the flight is normal, I will testit further.
I put all that modified (replaced stitch driver texet`ovsky). Help test.


And you can do the same firmware on TeXeT TB-860HD. I will be very grateful. : Thank_you:



Rep: (1)
NMatyash @ 04.08.2012, 15:22*
And you can do the same firmware on TeXeT TB-860HD. I will be very grateful. : Thank_you:

Unfortunately I do not get. The fact that all of these devices (TB-840HD, effireColorBookTR801, MrBookFrank, rbk-470) processors Boxchip F15, and TeXeT TB-860HD - Boxchip E200. You need to look for relatives with such a processor and preferably 8 inch.

Post has been editedMaximus55 - 05.08.12, 07:01



Rep: (0)
Testil living creature has a new firmware for the subject? I tried to run on your machine - terribly brakes. MLC offers useless, even pictures do not show. DJVU with an increase in more than one zoom creates what the bands that hinder reading. in general, I would like to know the firmware on another's "territory" is not consistently work, or on the original the same thing?

Post has been editedIgnate78 - 08.08.12, 18:18



Rep: (10)
Ignate78,
firmware 1.9 until normal flight. doc opens and leafs fast. the rest is not yet time to check (before flashing forgot to save the book)



Rep: (27)
C new firmware dynamics become louder or not?

Post has been editedholod1985 - 15.08.12, 02:48



Rep: (1)
Nevtutor @ 01.08.2012, 08:16*
Guys, help! I use TB-840HD 2 months. Yesterday there was a sort of thing: while reading the screen flipped (ie, that it was at the top of the bottom and vice versa), and became the show, as in a mirror. Impossible to read. Music and video playback is fine. I changed the firmware - does not help. What to do? Prompt, ECW.


Help no longer needed. Plume pulled from the connector and stuck back. It helped.



Rep: (1)
Gentlemen, you do want to find out firmware 1.9 - standing? what has changed since the 1.6 firmware ?? generally stable firmware or school? ;)
I have so far no serious problems with respect to no. The only besivo book - on-off slider has gone mad))) he initially turned off and the book, and then lock the start button, now generally does not perform any functions. sin on krivorukost - mb caught it out of the case when the reader is taken out, but oh to hell with him, with the slider)
The carcass, of course, made disgusting - buttons and sockets little sway, net (do not know how to call it) on the dynamics of constantly moving out into the book, we have to pull her toothpicks><
when buying a distressed film - painted on her features books, had, of course, to remove, but I have not found a new eight-inch tape.
In general, the reader at a price failed to take at least a comfortable viewing videos of any format readable with no brakes and a sound backlog. any unscanned books is quite a pleasure to read, scan to pdf and deja vu, of course, not a fountain.
The viewing angle is very small, it is impossible to read in the sun at any brightness, the screen becomes unreadable at all, it's sad.
Functionality embedded in the book, happy, lacking only some minimal text editor, even for notes.
Surround the battery - it is both good and bad. On the one hand, I was surprised when the film 4 looked from the first to the maximum charge, on the other, lying to read and keep this edifice in the hands of extremely inconvenient.
All this is on my review this is over, I want to here the firmware 1.9. supply, but with my rukozhopiem very afraid to do it. And whether or not at all?



Rep: (0)
Book pleased nemnoo sluggish but to read on the road will go. From the date of purchase and up to the first charge [battery was slightly higher than half] took 9 days, reading an average of 3 hours per day until the battery died, because I travel a lot and often, I was completely satisfied !!! I read on the 3rd level of illumination with white lettering on a black background !!! In general, the device suits !!! Flehi stuck at 16 gig, and pictures with the image of his beloved wife, and filmets see [normal headphones bought large Dialog] muse and listen, and radio plays ok !!! This is not a tablet, iPad is not some sort, just a reader, for the money it is a decent unit 3600 !!!

Post has been editedonizev - 25.10.12, 13:20



Rep: (0)
guys tell me what to do? The top screen has become very spontaneously switch, a touch book almost did not react
version 1.0

Post has been editedwerlord - 29.10.12, 14:33



Rep: (1)
werlord @ 29.10.2012, 14:31*
guys tell me what to do? The top screen has become very spontaneously switch, a touch book almost did not react


Try to make out and pull-insert the sensor loop.



Rep: (1)
Is it possible to tell at this book gash Android OS ???



Rep: (3)
mvv55
Why android here? The processor is too weak for the coolest toys, if you need them. And for the internet there are specials. Device plates.
I think that is not real.


Posted on 14.11.2012 21:00:

werlord
You know, my brother on such cases is always answer -pereproshitsya. Try, can really help).



Rep: (2)
mvv55,
at the office site is written that you can not

Posted on 16.11.2012, 15:47:

can anyone knows where you can download firmware versions 1.7 and 1.8?
Online 1.6, then right 1.9. 1.9 book does not remember the page on which it was closed, and 1.6. It does not support the * .doc. and version 1.10 is not clear when they will come to release



Rep: (0)
mvv55 @ 13.11.2012, 22:57*
Is it possible to tell at this book gash Android OS ???


Yeah, just saw more take: rofl:



Rep: (125)
What pomogite.Chitayu book, but quickly turns off the screen.


Full version    

Help     rules

Time is now: 27/09/19, 5:22