And so we will need: 1. PC (windows, linux or mac) working internet.
2. HP touchpad with native usb cable.
3. Care and a little patience.
Step 1: Make sure that the tablet at least 2GB of free space.Download the following components
(Downloaded files are not unpack) :
1.
Moboot bootloader multizagrzki for operating systems
2.
Firmware CyanogenMod alfa 2.1 3.
Clockwork Mod Recovery - rekaveri menu for reinsertion and rehabilitation.
Step2: 1. Download
Acme Installer and yet not touch it, it will work with later
2. Download and install the HP WebOS SDK to
Windows ,
Mac or
Linux .
Need to work
Palm Novacom , The remaining components to install Virtualbox, or Java is not required.
Step 3: 1) Connect the tablet to a PC using a USB cable and select USB Drive option.
2) When the tablet is plugged in mass storage mode, open it on your PC and create a folder called cminstall and copy the file you downloaded in step 1, without unpacking.
3) Remove the tablet from the PC using safe extraction (right-click on the drive - to extract), unplug the USB - cable from the computer and turn off the tablet.
Step 4: 1) Hold the volume up button at the same time, press the power button. You should see the White USB symbol.
2) Connect the USB cable back into the computer, and if Novacom drivers are correctly installed the device will be automatically recognized.
Step 5: 1. Now unzip the downloaded archive Acme Installer in step 2 to the folder where the file was installed Novacom (in Linux and MAC OS X will be different) -
C: \ Program Files \ Palm, Inc 2. Open the cmd (Windows) or Terminal (Linux or Mac), go to the directory c: Extract Acme Installer command:
cd "C: \ Program Files \ Palm, Inc"
below list the following command:
The tablet will reboot and it Linux boot screen will appear.
Loading finished and installed android.
Now set the current firmware version: 1. Download - Firmware:
2. Download the official suite of Google applications:
3. Connect the tablet to a PC in storage mode and transfer both files to the memory of the tablet, not a folder, as it is in the very memory.
4. Turning off the Tablet PC and reboot the tablet.
5. When the tablet is loaded into moboot menu it using Clavey volume choose ClockworkMod presses the "home" (Return) and get into the rekaveri menu.
6. rekaveri menu Do the following algorithm:
- select install zip from sdcard
- choose chooze zip from sdcard
- select the file with the firmware
- will begin installing firmware
7. After that, We perform the same procedure for installing googleapps
8. Reboot your tablet
9. Rejoice new android
PS For subsequent firmware using this algorithm
Note:
To switch between operating systems, reboot the tablet and the menumoboot select the desired