12 pagesV  < 1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> [HD2] [7740] UltraFruit | Unofficial DFT firmware
gres-197
Message#1
14.01.12, 19:28
| RBPT_Team |
******
[offline]

Group: Developers
Messages 676
Check in: 14.03.10
Apple iPhone 4S

Reputation:-  308  +

HTC HD2 DFT UltraFruit [7740]
HTC Leo, HTC T8585
General: Description | Discussion | FAQ | Purchase lAccessories | Owner communication | Marriage | GPS | Modification and refinement of the OEM software HTC |Adaptation of OEM software for HTC | Discussion on energy consumption |
Firmware: General flashing questions | Discussion of the original firmware |

���� �������� HTC HD2 download

| HTC Leo - Firmware radio module |
HTC Leo (HD2) - Android OS | WP7 for HD2 | Learning to build firmware
WP7: Windows Phone 7 - First Aid | Windows Phone 7 - Devices | Windows Phone 7 - Programs | Windows Phone 7 - Games | Windows Phone 7 - Decorations | Windows Phone 7 - Firmware | WP7 firmware database |

Requirements:
1. HSPL3:HSPL3_PKG.rar(2.08.HSPL);
2. Radio 2.15 HD2(Suitable for all HD2);
3. Magldr 1.13 (MAGLDR v1.13:DFT_LEO_MAGLDR113.rar).

Date of release:
01/13/12 (DD / MM / YY)
Windows Phone version:
7.10.7740.16

The authors of the firmware is the commandDFT (Cotulla), link to the official resource -DFT UltraFruit.

UltraFruit firmware features:
  • Improved the quality of shooting, both photos and video.
  • The mode "Special camera keys" is implemented - during shooting, you can use the "volume down" key, as a button for focusing, and a "call button", as producing a picture.
  • You can change the layout of the keys directly on the phone using the application "Settings Ex" (thanksultrashot ).
  • The new screen driver with improved, as multitouch support, and the usual trace (unfortunately there are some problems).
  • Reduced screen wake-up time (now somewhere 200 ms).
  • Internet Sharing Worker (Shared Internet).
  • Mac - the address does not change after each reboot and is different for each device.
  • Solved the problem with power consumption.
  • FullUnlock with the ability to run Opera, as well as installing applications through a mobile browser.
  • Fixed Xap Installer (thanksultrashot ).
  • There is the possibility of updating and installing cabs, while the card is not blocked (today you can upgrade to build 8107).
  • A lot of files updated and added from new firmware.
  • Fixed market. HD2 is now recognized as the HTC Schubert.
  • Built-in Flashlight, Connection Setup, Photo Enhancement from HTC.
  • Added HD2 image in Zune (thanksHD2Owner ).
  • Built-in registry editor and file manager (thanksJulien schapman ).

Looking ahead:
New release expectedMagldr . While it is not laid out, there is still a lot to be done.

Prescription:
  1. When placing somewhere in the firmware, be sure to include a link to the official resource, that is, the XDA or DFT website, and the link should lead to a specific topic - DFT UltraFruit .
  2. You should not use files from this firmware for two weeks after release, that is, somewhere around January 27th, at this time I will be collecting feedback on the firmware in order to apply or finish something. Please respect the work of others.

Rule the registry:
New registry settings ...
[HKEY_LOCAL_MACHINE \ CotullaCode \ KeyLight]
"Timeout" = dword: 2710

[HKEY_LOCAL_MACHINE \ CotullaCode \ Keys]
"BackKeyCode" = dword: 1B
"GreenKeyCode" = dword: 82
"HomeKeyCode" = dword: 7C
"WinKeyCode" = dword: 5B
"EnableSpecCamKeys" = dword: 1


Download firmware:
DFT UltraFuit - on the first link - on the second link - on the third link

Dear users, be mutually polite, say "thank you" by increasing your reputation (Picture) If you do not have 15 more useful posts, ask to raise your reputation by pressing the buttonPictureunder the message of who you want to raise your reputation.
And do not forget aboutForum Rules


Post has been editedkovalDN - 28.02.14, 08:35
Reason for editing: Corrected
scrabic
Message#42
14.01.12, 16:56
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 258
Check in: 24.08.10
HTC HD2

Reputation:-  18  +

Earned and I finally have it, all the same problem was in the card.


--------------------
HTC p3300 - HTC HD2 - HTC Velocity 4G - HTC ONE X - HTC Butterfly Sred- Asus Zenfone 2 551ML - Honor 8 Pro - Honor p30 pro
Tuner47
Message#43
14.01.12, 17:10
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 166
Check in: 29.09.07
Lenovo Vibe P1

Reputation:-  5  +

And the cards in all the new firmware (from kotuly and RBPT) do not stop?
Splinter17
Message#44
14.01.12, 17:18
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 311
Check in: 02.01.11
Xiaomi Mi 4c Prime

Reputation:-  24  +

I did it, everything works with a bang ... I met one annoying glitch - if you run a couple of programs to download from the market (via EDGE), the phone goes to sleep ... but after that it does not turn on ... only by juggling the battery ... time

After each phone call my phone hangs tight, a black screen and that's it. Then you have to rebuild and ship WP7 again.
scrabic
Message#45
14.01.12, 17:19
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 258
Check in: 24.08.10
HTC HD2

Reputation:-  18  +

Tuner47 @ 01/14/2012, 5:10 PM*
And the cards in all the new firmware (from kotuly and RBPT) do not stop?


SD card not locked after update. Stay unlocked.
DFT UltraFruit

HTC HD2 RBPT (RainBow Pro Team) ...also not blocked

Post has been editedscrabic - 14.01.12, 17:27


--------------------
HTC p3300 - HTC HD2 - HTC Velocity 4G - HTC ONE X - HTC Butterfly Sred- Asus Zenfone 2 551ML - Honor 8 Pro - Honor p30 pro
s-300pmu
Message#46
14.01.12, 17:28
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 60
Check in: 20.11.11
HTC HD2

Reputation:-  3  +

After upgrading to 8107, the "Data Transfer" tab has stopped opening. In the registry, can this be fixed?
avenik
Message#47
14.01.12, 17:55
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 58
Check in: 12.07.10
Nokia Lumia 920

Reputation:-  11  +

After upgrading to 8107, the "Data Transfer" tab has stopped opening. In the registry, can this be fixed?

The same problem, the hub "phone" still stopped opening. I rolled back to 7740

Post has been editedavenik - 14.01.12, 18:20


--------------------
siemens a40->siemens m55->siemens c45->siemens cx75->SE k750->asus p535->HTC HD2->Nokia Lumia 920
scrabic
Message#48
14.01.12, 18:51
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 258
Check in: 24.08.10
HTC HD2

Reputation:-  18  +

Out with a new firmware, damp. When talking, I can hardly hear, and even how much I did not add the interlocutor, I almost did not hear. The photo is excellent, but the video is worse than the RainBow Pro Team.


--------------------
HTC p3300 - HTC HD2 - HTC Velocity 4G - HTC ONE X - HTC Butterfly Sred- Asus Zenfone 2 551ML - Honor 8 Pro - Honor p30 pro
RUSTano4ek
Message#49
14.01.12, 18:57
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 371
Check in: 04.05.10
HTC HD2

Reputation:-  21  +

video worse than RainBow Pro Team.

Yes, the video in 720px writes grainy, compared to others that I tried (IMHO), about other bugs, cotulla and wrote that they would use it while it was assembled and did not drag it away for others to catch and fix bugs.


--------------------
HTC HD2 Android MIUI Rom (2.3.7) + Android 4.0.3 CM9 (SD version) / SD32Gb + 1Gb Ext3 + SWAP 250Mb + ZRAM \ CPU 1612Mhz
gres-197
Message#50
14.01.12, 19:38
| RBPT_Team |
******
[offline]

Group: Developers
Messages 676
Check in: 14.03.10
Apple iPhone 4S

Reputation:-  308  +

I appeal to everyone, we are moving with the firmware from DFT to a new topic -HD2 - DFT UltraFruit.

Post has been editedgres-197 - 14.01.12, 19:39


--------------------
gres-197
Message#51
14.01.12, 19:40
| RBPT_Team |
******
[offline]

Group: Developers
Messages 676
Check in: 14.03.10
Apple iPhone 4S

Reputation:-  308  +

Please read the instructions carefully!


Instructions for flashing HTC HD2 (Leo) on WPВ®7 * (for those who are extremely aware of what and how to B))
  1. Apply Task 29 (not recommended if there are BAD blocks and non-fulfillment of clause 2);
  2. Install WM® 6.5 *;
  3. Repeat claim 1 (not recommended in the presence of BAD blocks);
  4. Install 2.08 HSPL;
  5. Install Radio HD2 for WP®7 *;
  6. Install MAGLDR 1.13;
  7. Turn off HD2 completely and disconnect from PC;
  8. Format SD card;
  9. Insert SD card in HD2;
  10. Go to the menu MAGLDR 1.13;
  11. Apply MAGLDR 1.13 ->10. "Services" ->4. "UseLast24NAND" ->"Green - YES";
  12. Apply MAGLDR 1.13 ->11. "Reset";
  13. Apply MAGLDR 1.13 ->10. "Services" ->5. "ClearSD MBR" ->"Green - YES";
  14. Apply MAGLDR 1.13 ->12. "PowerDown";
  15. Repeat step 10;
  16. Apply MAGLDR 1.13 ->5. "USB Flasher" ->"USB Flasher mode" ->"Wait USB ...";
  17. Connect HD2 to PC;
  18. Install WP®7 * for HD2 ->"DWI.exe";
  19. Apply HD2 ->"Settings" ->Device Information ->"Reset";
  20. Set the correct time and date.
  • In p.p.1-6: HD2 run in bootloader mode.
  • In p.1-6, 17, 18: HD2 to connect to the PC via USB2.0 (USB3.0 is not recommended).
  • In paragraphs 1-6, 18: Run files on a PC as administrator.
  • The maximum option - p.p.1-20 (recommended).
  • The best option is pp 1 or 2, pp 4-11, 13, p.12 instead of 14, pp 15-20 (conditionally recommended).
  • The minimum option is pp.1, pp.4-6, pp.8-11, 13, 16-18, 20 (minimum recommended).
  • The option is p.p.1, pp.8-11, 13, 16-18 (optionally recommended).
  • It is possible (but not recommended) not to apply ppt procedures. 1, 2, 3, 5, 12, 14-15, 19, 20 (either all together or in part, or separately).

Instructions for flashing HTC HD2 (Leo) on WPВ®7 * (for understanding and all consonants: yes2 :)
  1. Apply Task 29 ->"task29.exe" (it is not recommended to use it only if there are BAD (bad) blocks in the NAND memory and with the subsequent non-fulfillment of item 2);
  2. Install the old WM® 6.5 * firmware (3.14 recommended) ->"ROMUpdateUtility.exe" (it is possible (but not recommended) not to apply if WM® 6.5 firmware is already installed *);
  3. Repeat claim 1 (not recommended only if there is BAD (bad) blocks in NAND memory);
  4. Install HSPL version 2.08 HSPL ->"HSPL4.exe" (possibly (but not recommended) not to apply if this version of HSPL is already installed);
  5. Install a radio module for HD2 that supports WP®7 * ->"CustomRUU.exe" (perhaps (but not recommended) not to apply if the recommended version of the radio module is already installed);
  6. Install MAGLDR 1.13 Loader ->"ROMUpdateUtility.exe" (may (but not recommended) not be used if this version of MAGLDR is already installed);
  7. Turn off the HD2 completely and disconnect it from the PC;
  8. Format the SD card on a PC using standard Windows tools and / or specialized programs, such as, for example, SDFormatter;
  9. Insert SD card in HD2;
  10. Enter the bootloader menu MAGLDR 1.13, for which click and continue to hold the “On / Off” button on the HD2 until the menu appears on the HD2 screen;
  11. Activate 24MB extra memory by selecting MAGLDR 1.13 in the bootloader menu ->10. "Services" ->4. "UseLast24NAND" ->"Green - YES", by navigating through the menu using the "Volume adjustment" key, making a selection by pressing the "Call" button, if necessary returning to the previous submenu by pressing the "Start" button, after which you should automatically exit to the main menu;
  12. Select in the bootloader menu MAGLDR 1.13 ->11. "Reset", after which HD2 should automatically reboot;
  13. Remove the MBR SD card by selecting the MAGLDR 1.13 in the bootloader menu ->10. "Services" ->5. "ClearSD MBR" ->"Green - YES", after which they should automatically go to the main menu;
  14. Turn off HD2 completely by selecting MAGLDR 1.13 in the bootloader menu ->12. "PowerDown", after which HD2 should automatically shut down;
  15. Repeat step 10;
  16. Select in the bootloader menu MAGLDR 1.13 ->5. "USB Flasher", after which the menu "USB Flasher mode" should appear on the HD2 screen and under it the inscription "Wait USB ...";
  17. Connect the HD2 via the USB connector to the PC, after which the inscription on the screen should change to "Wait USB ... USB";
  18. Install the WP®7 * custom firmware for HD2 you are interested in to HD2 ->"DWI.exe";
  19. After the first launch of WP®7 * for HD2 and its final installation, go to the Settings menu ->Device Information ->"Reset settings", and perform a reset, after which HD2 should automatically reboot;
  20. After the next launch of WP®7 * for HD2, set the correct time and date.
  • In paragraphs 1-6: HD2, it is recommended to run in bootloader mode (i.e., on a completely off HD2, briefly pressing the "On / Off" button while holding down the "Volume Adjustments" button at the "Volume Down" level until a color screen appears. ).
  • In paragraphs 6-6, 17, 18: HD2 to the PC is recommended to connect via USB2.0 connector (USB3.0 is not recommended).
  • In paragraphs 1-6, 18: It is recommended to run the installation files on the PC as administrator.
  • When reflashing to achieve the highest possible positive result, it is recommended to start with item 1 of this instruction and then in order to completion.
  • The best option is pp 1 or 2, pp 4-11, 13, p.12 instead of 14, pp 15-20 (conditionally recommended).
  • The minimum option is pp.1, pp.4-6, pp.8-11, 13, 16-18, 20 (minimum recommended).
  • The option is p.p.1, pp.8-11, 13, 16-18 (optionally recommended).
  • It is possible (but not recommended) not to apply ppt procedures. 1, 2, 3, 5, 12, 14-15, 19, 20 (either all together or in part, or separately).

Instructions for flashing HTC HD2 (Leo) on WPВ®7 * (for those who need to chew EVERYTHING: sveta :)
    A warning: You use this instruction at your own risk and risk, and no one except you personally is responsible for any possible conflicts and / or damage caused to you and (or) to third parties when applying the following procedures; No one gives any guarantees, either directly or indirectly, to the achievement of any positive results by you in the application of the following procedures; You are also notified that not all SD cards (memory cards) are compatible with WP®7 *, and when flashing HTC HD2 to WP®7 * SD card (memory card) is formatted, do not lose your data!
    • When reflashing to achieve the highest possible positive result, it is recommended to start with item 1 of this instruction and then in order to completion.
    • It is possible (but not recommended, considering that no one except you can know the hardware and (or) software capabilities of your equipment) not to apply the p. 1, 2, 3, 5, 12, 14-15, 19, 20 (either all together or in part, or separately).
    • If, nevertheless, with full observance of this instruction, you have not been able to reflash WP®7 * on HTC HD2, you may have other solutions or your equipment (in whole or in part) is incompatible for WP®7 *.

  1. Apply on HTC HD2 ->Task 29: launching the task29.exe installation file on the PC as administrator (the name of the installation file may be different) before connecting the HTC HD2 (before going to SPL (bootloader, bootloader, mattress) on it) - on the completely disabled HTC HD2 briefly pressing the "On / Off / End Call" button (Red - red) while holding the "Volume Control" key on the side of the HTC HD2 at the "Volume Down" level (down) until a color screen appears, via a USB connector to the PC (recommended via USB2.0, via USB3.0 is not currently guaranteed I), and following the instructions on the screen until installation is completed. Note: It is not recommended to use it only if HTC HD2 - BAD (bad) blocks are present in the NAND memory and if the next failure to comply with item 2;
  2. Install on HTC HD2 ->old WM®6.5 * firmware for HTC HD2 (3.14 firmware recommended): running the installation file "ROMUpdateUtility.exe" on the PC as administrator (the name of the installation file may be different), before connecting HTC HD2 (after going into it to SPL mode ( bootloader, bootloader, mattress) - on a completely turned off HTC HD2, briefly pressing the "On / Off / End Call" button (Red - red tube) while holding down the "Volume Adjustment" key on the side of "Volume Down" (down) until a color screen appears) via USB to PC (recommended via USB2.0, via USB3.0 is not currently guaranteed), and following the instructions on the screen until the installation is completed; after which, on the HTC HD2, fully boot into the WM® 6.5 * system installed by the firmware; then completely turn off the HTC HD2 and disconnect it from the PC. Note: it is possible (but not recommended) not to apply if the WM® 6.5 * firmware is already installed on the HTC HD2;
  3. Repeat step 1. Note: not recommended only if HTC HD2 - BAD (bad) blocks are in NAND memory;
  4. Install on HTC HD2 ->HSPL version 2.08 HSPL (SPL-2.08.HSPL 8G XE, CotullaHSPL) by the HSPL4 installer: launching the installation file "HSPL4.exe" on the PC as administrator and connecting HTC HD2 (before going to SPL (bootloader, bootloader, mattress) - on a completely turned off HTC HD2, briefly pressing the “Call on / off / reject” button (Red - red) while holding down the “Volume Adjustment” key on the side of HTC HD2 (“Volume Down”) (until the color screen appears) ) via USB connector to PC (recommended via USB2.0, via USB3.0 is not currently guaranteed The burden), and following the instructions on the screen until installation is completed. Note: it is possible (but not recommended) not to apply if this version of HSPL is already installed on HTC HD2;
  5. Install on HTC HD2 ->radio module for HTC HD2 that supports WP®7 * (Radio_2.15.50.14 (recommended, suitable for all HTC HD2, 3G and phone resources are probably better), possibly (but not recommended) - Radio_2.12.50.02_2 (battery consumption is probably lower ) or Radio_2.14.50.04): running the "CustomRUU.exe" installation file on the PC as administrator (the name of the installation file may be different), before connecting HTC HD2 (after going into SPL mode (bootloader, bootloader, mattress) on it) - on the completely turned off HTC HD2, briefly pressing the "On / Off / End Call" button (Red - red rub k) while clamping the side of the HTC HD2 "Volume Control" key at the "Volume Down" level (down) until a color screen appears) via the USB connector to the PC (recommended via USB2.0, USB3.0 is not guaranteed at the present time) , and following the instructions on the screen until the installation is completed; then completely turn off the HTC HD2 and disconnect it from the PC. Note: it is possible (but not recommended) not to apply if the recommended version of the radio module is already installed on the HTC HD2;
  6. Install on HTC HD2 ->MAGLDR 1.13 bootloader: running the "ROMUpdateUtility.exe" installation file on the PC as administrator, before connecting the HTC HD2 (before going to SPL (bootloader, bootloader, mattress) on it) - on the completely off HTC HD2, briefly pressing the "Enable / disable" button while turning off / rejecting the call "(Red - red handset), while holding the" Volume Control "key on the side of HTC HD2 at the" Volume Down "level (down) until a color screen appears, via the USB connector to the PC (recommended via USB2.0, via USB3.0 is not guaranteed at this time), and following the instructions The screen until installation is completed. Note: it is possible (but not recommended) not to apply if this version of MAGLDR is already installed on the HTC HD2;
  7. Turn off the HTC HD2 completely and disconnect it from the PC;
  8. Format the SD card (memory card) on a PC using standard Windows tools and / or specialized programs, such as SDFormatter;
  9. Insert the SD card (memory card) into the HTC HD2;
  10. Go to the bootloader menu MAGLDR 1.13, for which click and continue to hold on the HTC HD2 button "on / off / reject call" (Red - red tube) until the menu appears on the screen of HTC HD2;
  11. Activate 24MB extra memory by selecting MAGLDR 1.13 in the bootloader menu ->10. "Services" ->4. "UseLast24NAND" ->"Green - YES", by navigating through the menu using the "Volume Adjustment" key on the side of HTC HD2 at the "Increase Volume" (up) and "Volume Down" (down) levels, making a selection by pressing the Call button on HTC HD2 ( Green - green handset), if necessary, return to the previous submenu by pressing the Start button (Windows icon) on HTC HD2, after which you should automatically go to the main menu;
  12. Select in the bootloader menu MAGLDR 1.13 ->11. "Reset", by navigating through the menu using the "Volume Adjustment" key on the side of the HTC HD2 at the Volume Up (up) and Volume Down (down) levels, making a selection by pressing the Call button on the HTC HD2 ( Green - green handset), if necessary, return to the previous submenu by pressing the Start button (Windows icon) on the HTC HD2, after which the HTC HD2 should automatically restart;
  13. Remove the MBR SD card by selecting the MAGLDR 1.13 in the bootloader menu ->10. "Services" ->5. "ClearSD MBR" ->"Green - YES", by navigating through the menu using the "Volume Adjustment" key on the side of HTC HD2 at the "Increase Volume" (up) and "Volume Down" (down) levels, making a selection by pressing the Call button on HTC HD2 ( Green - green handset), if necessary, return to the previous submenu by pressing the Start button (Windows icon) on HTC HD2, after which you should automatically go to the main menu;
  14. Turn off HTC HD2 completely by selecting MAGLDR 1.13 in the bootloader menu ->12. "PowerDown", by navigating through the menu using the "Volume Adjustment" key on the side of the HTC HD2 at the "Volume Up" (up) and "Volume Down" (down) levels, making a selection by pressing the "Call" button on HTC HD2 Green - green handset), if necessary, return to the previous submenu by pressing the Start button (Windows icon) on the HTC HD2, after which the HTC HD2 should automatically turn off;
  15. Repeat step 10;
  16. Select in the bootloader menu MAGLDR 1.13 ->5. "USB Flasher", by navigating through the menu using the "Volume Adjustment" key on the side of HTC HD2 at the "Increase Volume" (up) and "Volume Down" (down) levels, making a selection by pressing the "Call" button on HTC HD2 (Green - green handset), if you need to return to the previous submenu by pressing the Start button (Windows icon) on HTC HD2, then the “USB Flasher mode” menu should appear on the HTC HD2 screen and under it “Wait USB ...”;
  17. Connect HTC HD2 via USB connector to PC (recommended via USB2.0, USB3.0 is not guaranteed at the moment), then on the HTC HD2 screen in the "USB Flasher mode" screen the inscription "Wait USB ..." should change to "Wait USB ... USB ";
  18. Install on HTC HD2 ->WP®7 * for HTC HD2 custom firmware you are interested in: by running the installation file "DWI.exe" on the PC as administrator, and following the instructions on the screen until the installation is completed;
  19. After the first launch of WP®7 * for HTC HD2 and its final installation, go to the Settings menu ->Device Information ->“Reset settings”, and reset, after which the HTC HD2 should automatically reboot;
  20. After the next launch of WP®7 * for HTC HD2, set up the correct time and date on HTC HD2.
  21. If you comply with this instruction, you must have a working HTC HD2 with WP®7 *, understanding that it is custom, with all the ensuing consequences, and you are familiar with and agree with what is contained in the warning at the beginning of this instruction.


Post has been editedgres-197 - 15.01.12, 15:52


--------------------
fokus81
Message#52
14.01.12, 19:57
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 14.03.08
Qtek S100

Reputation:-  0    +

Nemagu install set shtoto about the memory card.
gres-197
Message#53
14.01.12, 20:00
| RBPT_Team |
******
[offline]

Group: Developers
Messages 676
Check in: 14.03.10
Apple iPhone 4S

Reputation:-  308  +

Nemagu install set shtoto about the memory card.

Before this firmware, what was it?


--------------------
Splinter17
Message#54
14.01.12, 20:06
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 311
Check in: 02.01.11
Xiaomi Mi 4c Prime

Reputation:-  24  +

Today I had two calls on this firmware, and after each the phone hung up - a black screen, as if it does not come out of hibernation after a call, but you can’t even hang up the phone - a black screen and that's it. A long press on the shutdown helps, there are no labels, everything is stupidly rebooting and downloading WP7 again.
gres-197
Message#55
14.01.12, 20:08
| RBPT_Team |
******
[offline]

Group: Developers
Messages 676
Check in: 14.03.10
Apple iPhone 4S

Reputation:-  308  +

Today I had two calls on this firmware, and after each the phone hung up - a black screen, as if it does not come out of hibernation after a call, but you can’t even hang up the phone - a black screen and that's it. A long press on the shutdown helps, there are no labels, everything is stupidly rebooting and downloading WP7 again.

Perhaps someone also has such problems, Cotulla will notice and solve. If possible, it is necessary to collect the entire list of shortcomings in order to send it to Cotulla.

Post has been editedgres-197 - 14.01.12, 20:08


--------------------
RUSTano4ek
Message#56
14.01.12, 20:33
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 371
Check in: 04.05.10
HTC HD2

Reputation:-  21  +

the flashlight is built in, but it still works the same as the previous ones: one diode is lit at full power, the second is not.


--------------------
HTC HD2 Android MIUI Rom (2.3.7) + Android 4.0.3 CM9 (SD version) / SD32Gb + 1Gb Ext3 + SWAP 250Mb + ZRAM \ CPU 1612Mhz
needlepnz
Message#57
14.01.12, 20:35
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 259
Check in: 23.02.08
Xiaomi Mi 5S 4/128

Reputation:-  23  +

The firmware was installed without errors, but does not see my flash drive (it writes 0 MB freely), although on the firmware from gres-197 with a flash drive everything is fine
fokus81
Message#58
14.01.12, 20:36
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 14.03.08
Qtek S100

Reputation:-  0  +

gres-197 Your HD2_RBPT_8107_V4.5_Release_1 was standing. But she still doesn’t want to flash the bootloader, the bootloader is writing the finish, and on the HD2 the dock’s graphics are hanging and the graphics aren’t pulled out by Akum, I insert the Akum and plug in the HD2, I’m loading the backend, I’m doing it, I’m not going to pull out the Akum, I insert the Akum and I plug in the HD2, I’m loading the heading, I’m not able to pull out the Akushi. 5_Release_1
altezzza
Message#59
14.01.12, 20:53
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 129
Check in: 29.07.11
Google nexus 5

Reputation:-  4  +

Rule the registry - what's this?))
roll back to vm 6.5 + format flash drives
Shortly speaking:
1. To begin with, it is recommended to flash the old firmware with WM 6.5 and boot into it or make Task 29;
2. Format your SD card;
3. Flash Magldr 1.13;
4. Go to magldr holding the off key until the list appears;
5. Activate 24MB extra memory in Magldr services;
6. Remove the MBR SD card from Magldr services;
7. Select item 5 - "USB Flasher" (navigate through the menu using the volume buttons);
8. Press the "Call" button (green tube);
9. Connect the device to the computer;
10. Run "DWI.exe" on the computer (as Administrator) and follow the instructions on the screen. © gres-197

Then there will be no black screens and hangs)

Post has been editedaltezzza - 14.01.12, 20:54


--------------------
Dark! Dea by IBTeam V1.3
16Gb Noname 10 class
Indy05
Message#60
14.01.12, 20:53
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1067
Check in: 08.01.09
Xiaomi Redmi 5 Plus 3/32

Reputation:-  56  +

fokus81,
24 megabytes activated? It helped me ...


--------------------
Splinter17
Message#61
14.01.12, 21:01
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 311
Check in: 02.01.11
Xiaomi Mi 4c Prime

Reputation:-  24  +

Then there will be no black screens and hangs)

Black screen exactly after Task29 will not be?
Everything else I did, Task29 just did not do after the Gres firmware.

12 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 14:58